Hello fella Lian Li owners. If you want to post pics of you water cooled Lian Li case, this is the place tou put'em. ;)
Lian Li cases only! :)
Greetings from LockBreaker :)
(Pics of mine will come as soon as I get to order the parts)
Hello fella Lian Li owners. If you want to post pics of you water cooled Lian Li case, this is the place tou put'em. ;)
Lian Li cases only! :)
Greetings from LockBreaker :)
(Pics of mine will come as soon as I get to order the parts)
lookin'hot tom :D nice thread btw, I love lili's
I'll post mine, but not after Tom!! heh, nice work
V2000 Rulez:D
http://img219.imageshack.us/img219/9575/16010182ma4.jpg
http://img111.imageshack.us/img111/883/97075985lt4.jpg
http://img240.imageshack.us/img240/2796/11ei0.jpg
http://img106.imageshack.us/img106/1341/87871517gy8.jpg
http://img106.imageshack.us/img106/6315/47085704uu6.jpg
http://img215.imageshack.us/img215/3482/42698375gr3.jpg
Wow. :D
These cases even outranges the Murderbox. At least in my opinion. :)
Tom: It must have taken forever to do that paintjob inside your case. But it shure looks sweet though. :)
This is a old build.... now i've a Dimastech benching table and i'm working on a pc-a06 here...
Hope you like it....
Full worklog here
http://img184.imageshack.us/img184/4079/61313960ee5.jpg
http://img184.imageshack.us/img184/740/30920304zc7.jpg
http://img516.imageshack.us/img516/6931/69794547nu3.jpg
http://img409.imageshack.us/img409/9918/20084342vk0.jpg
http://img409.imageshack.us/img409/1816/35141390la2.jpg
http://img520.imageshack.us/img520/8229/20242639eh9.jpg
http://img48.imageshack.us/img48/6408/74334980bq7.jpg
http://img409.imageshack.us/img409/6029/63197515ex6.jpg
http://img409.imageshack.us/img409/9182/92221094xq0.jpg
http://img266.imageshack.us/img266/1717/16eg0.jpg
Current work in progress. Will make a new thread for this continuation of Project Short Stack later.
http://img.photobucket.com/albums/v6..._0134small.jpg
http://img.photobucket.com/albums/v6..._2361small.jpg
Case is PC-A05B
Btw, the amount empty in the bottle of G11 is all I needed to add to this loop.
Chewbenator....the res is a 100 or 150?
I think its an 150
My thoughts exactly.Quote:
Originally Posted by ls206
Posting after Tom's would be like pulling into a Ferrari convention in your 65 Impala ragtop with the fuzzy dice bouncing from the rear view mirror.:rofl:
HAHAHAAHHA :DQuote:
Originally Posted by Movieman
That's like trying to overtake an f16 with your new Nike air's :D
Im waiting for disruptfams awesome V2k :):)
Correct.Quote:
Originally Posted by dnb#
Nice idea to have a LL only gallery. I'll start the CoolerMaster one when my project will be done (The parts from ChilledPC is sitting in the sorting facility in my city since saturday :(). This will also be a great way for those who are wondering which case or how to watercool them to read the specific galleries.
did you powdercoat the interior or is it regular spray paint?Quote:
Originally Posted by welshtom
Tom
Nasty big bubble in the red loop?
lol yeah!
Hey jedda post a pic of your rig in here :)
(come to think of it have you finished it yet?)
Finished?
What does this word mean?
lol
Its nearly there, for the time being. Get the new OS tomorrow and will drop the G0 in then too.
I'll put the last bay covers in and take some pics, but keep looking at other mobos, TFT panels etc
Tried the new bios?
Not sure what way is forward. 780i is solid but not the mix of PCI-E slots I'd like. Those ASUS workstation boards with a PCI-E X slot aare very appealing. The speed of hardware RAID would be a big help with the size graphic files and video I'm doing a lot with now and future.
It all comes down to my psu physical size. With a bigger psu I must lose a lower drive cage. So those drives would need to go in the front bays. Hence, my indecision on finishing off the bay layout.
Sort of in a 'maybe' loop.
wow very nice canine!
Just wc in the second case?
...WOW you only use another case for 2 bumps... :D and res... i can see a rad with 2 x 120 fan... what else do you put in there?
LOL....2 pumps, MCR220, MCR320, res, and another power supply. The case came from a project gone wrong:( So it was either put it to use or chuck it. This leaves me with one un-modded V2000 for a future build:) Besides the 2 120mm fans on top, this is the only part of the case I cut up. No more small oval hole.Quote:
Originally Posted by BND|MOD
http://img85.imageshack.us/img85/6236/p1010058vx3.jpg
@ RockfordFosgate I'm considering doing a similar setup with my v2000, and I was wondering what kind of temps are you getting.
I would like to know the temps for everything eg. load/idle temps for CPU, GPU, NB, and SB.
Thanks
I'll put this up as a place holder for better pics.
http://img.photobucket.com/albums/v4...casefront2.png
looking good jedda mate :)
i'm still waiting on perfpc to get them alphacool lcds back in stock
powdercoated :)Quote:
Originally Posted by ant1
That was just after filling, pumps were just used to boost it around to start so was nowhere near bled at that stage :)Quote:
Originally Posted by Jedda
Yeah they can be slow to restock.
Interesting to see Canine double up a V2000. Talk about room for a lodger!
I thought the next double case I saw would be another of the smaller Lian Li. Still, part of the appeal is that done right you can always revert it to two cases again. So if you have a second V2000 around, why not?
I'd like the V1200 bay tower and mid panel in a V2000. The up lifted floor bit would let you front mount the psu up in the niche I put my M-cube in. Two PA120.3 rads in the bottom of a V2000 anyone?
Tom,
Figured as much. Don't think you'd miss something like that.
hello everyone, here's my V1000B.
PC:
4800+ X2
A8N-Premium
8800GTX
HDD x 3
Enermax Liberty 620W
WC:
DDC2 w/ petra's top
D-Tek FuZion
EK88GTX FC
EK NF4
PA120.3
Tygon 1/2"
alphacool repack res
http://i137.photobucket.com/albums/q...4109Medium.jpg
http://i137.photobucket.com/albums/q...4111Medium.jpg
http://i137.photobucket.com/albums/q...4099Medium.jpg
http://i137.photobucket.com/albums/q...4101Medium.jpg
http://i137.photobucket.com/albums/q...4102Medium.jpg
http://i137.photobucket.com/albums/q...4103Medium.jpg
http://i137.photobucket.com/albums/q...g/DSC03957.jpg
http://i137.photobucket.com/albums/q...4107Medium.jpg
nice panel
My contribution:
http://img263.imageshack.us/img263/7...76largeoz7.jpg
http://img185.imageshack.us/img185/7...73largebk7.jpg
http://img175.imageshack.us/img175/6...00largexn5.jpg
http://img296.imageshack.us/img296/5...80largebn6.jpg
http://img127.imageshack.us/img127/8...87largedx9.jpg
http://img239.imageshack.us/img239/8...88largery4.jpg
http://img151.imageshack.us/img151/7...84largebx2.jpg
http://img242.imageshack.us/img242/2...94largeso8.jpg
http://img185.imageshack.us/img185/6...96largelv8.jpg
Nice setup trouble, Do you not think your asking alot of the pump? Im asking as using same one with a PA120.3 and a PA120.2 and woudering if im asking too much of it
Hi;
This is my first attempt inside a A10A:
http://i42.photobucket.com/albums/e3...u/DSCF0331.jpg
And this is one I put together at the begining of December inside a A71A:
http://i42.photobucket.com/albums/e3...u/P8270007.jpg
http://i42.photobucket.com/albums/e3...u/P8270008.jpg
http://i42.photobucket.com/albums/e3...u/P8270009.jpg
http://i42.photobucket.com/albums/e3...u/DSC00368.jpg
http://i42.photobucket.com/albums/e3...u/DSC00389.jpg
Chris
HiQuote:
Originally Posted by Bikerz
I think the pump is ok. The flow is quite alright :)
You know, Andy, it was only 10mm short of big enough for a PA120.3 to go across them.Quote:
Originally Posted by mcoffey
With a mesh 10mm bulge in one side panel the case would take 2 x PA120.3 running across, one where each drive cage is in the bottom, and a third in the roof.
Every now and then you get a good idea. That must've been mine for '07. lol
Really attractively styled colour and form.Quote:
Originally Posted by trouble2000
agreed, nicely done trouble2000. quite a few changes I've seen to you rig and it's looking the best so far :)
here's some of mine. I don't really have the hardware for any flash or daylight pictures to look any good :p:
http://i122.photobucket.com/albums/o...l/DSC00475.jpg
http://i122.photobucket.com/albums/o...l/DSC00476.jpg
http://i122.photobucket.com/albums/o...l/DSC00491.jpg
http://i122.photobucket.com/albums/o...l/DSC00477.jpg
http://i122.photobucket.com/albums/o...l/DSC00489.jpg
http://i122.photobucket.com/albums/o...l/DSC00487.jpg
An older AMD Lian Li rig refurbished
The CM HD bay is wonderful for freeing up real estate below for the pump! It also allows me to put an extra 120mm intake to positively pressurize the rig
http://i196.photobucket.com/albums/a...d66/Lian03.jpg
I can't remember the model...but its the older, without the side panel fan hole. Think its no longer available...like a hybrid of G7 and A7
http://i196.photobucket.com/albums/a...d66/Lian02.jpg
http://i196.photobucket.com/albums/a...d66/Lian01.jpg
The famed stocking filter! :up:
http://i196.photobucket.com/albums/a...d66/Lian05.jpg
Here is my contribution to the thread...
QuadFX in all its (former) glory :rofl:
Love the stocking filter! Does it make it easier to clean?
Nice!Quote:
Originally Posted by Hawkeye4077
Thinking of going there myself with a Supermicro and pair of Harpertown quads.
very cool
:up: Easy to install too, just let the rad "wear" the stockingQuote:
Originally Posted by fallencow
it does trap some heat on its own, but I see no effect on my temps, so :D
More pics please. Lets turn this into a Lian Li gallery. :)
My current system in the V2100 case.
http://i217.photobucket.com/albums/c...x/Mad-Max6.jpg
http://i217.photobucket.com/albums/c...x/Mad-Max2.jpg
http://i217.photobucket.com/albums/c...x/Mad-Max8.jpg
http://i217.photobucket.com/albums/c...x/Mad-Max7.jpg
http://i217.photobucket.com/albums/c...Mad-Max-14.jpg
Heres my first attempt at water cooling, note that it's still in the very early stages, It was a bit of a rush job, still need to cut window/exhaust holes out of the panels and tidy up the cabling.
http://img509.imageshack.us/img509/6263/p2030394hu7.jpg
http://img127.imageshack.us/img127/2629/p2030393jd2.jpg
http://img153.imageshack.us/img153/6042/pc210378gt4.jpg
http://img165.imageshack.us/img165/9774/pc210377eb6.jpg
http://img521.imageshack.us/img521/8886/pc220385nk4.jpg
http://img401.imageshack.us/img401/8081/pc220383hg1.jpg
http://img297.imageshack.us/img297/9262/pc210358sl4.jpg
http://img136.imageshack.us/img136/8333/pc210344xo5.jpg
My G70 :)
http://img262.imageshack.us/img262/7555/dsc05595bo9.jpg
http://img257.imageshack.us/img257/5223/dsc05594ya9.jpg
http://img244.imageshack.us/img244/7746/dsc05612cn4.jpg
http://img413.imageshack.us/img413/779/dsc05616dk1.jpg
http://img183.imageshack.us/img183/981/dsc05615dt2.jpg
http://img136.imageshack.us/img136/8019/dsc05601au5.jpg
My first watercoooling rig~
a PC7 Plus II
Quote:
Originally Posted by cuke2u
Quote:
Originally Posted by NEMESIS-X
thanks for those pics guys ... makes me want my case watercooled even more :D *ahem*chilledpc guys*ahem*
My A05A
http://lh3.google.com/d.hopero/R98xh...0/_3140003.JPG
http://lh6.google.com/d.hopero/R98xk...0/_3140006.JPG
http://lh4.google.com/d.hopero/R98xs...0/_3140009.JPG
http://lh3.google.com/d.hopero/R98xz...0/_3140011.JPG
http://lh6.google.com/d.hopero/R98x3...0/_3140014.JPG
Gallery
Build thread in sig.
nice going with that tiny case!
hows the airflow to the rad? the case feet could do with half an inch :p:
Nice cases!
Lian-Li rocks!!!
Very nice cases indeed!
http://img.photobucket.com/albums/v97/tmwong/om6.jpg
http://img.photobucket.com/albums/v9...ng/bling42.jpg
http://img.photobucket.com/albums/v97/tmwong/r2g1.jpg
http://img.photobucket.com/albums/v97/tmwong/nbmaxf.jpg
http://img.photobucket.com/albums/v97/tmwong/mcw30f.jpg
Time to revive this thread with my 3 years old V1K after a heart transplant.
Phil
Here's my Lian Li build from last year:
http://img.photobucket.com/albums/v5...19MAY09-00.jpg
http://img.photobucket.com/albums/v5...19MAY09-01.jpg
http://img.photobucket.com/albums/v5...25APR09-08.jpg
http://img.photobucket.com/albums/v5...19MAY09-04.jpg
http://img.photobucket.com/albums/v5...19MAY09-05.jpg
http://img.photobucket.com/albums/v5...19MAY09-06.jpg
There's a 3rd MCR220 under the bottom shroud, and a D5 up above pushing it all.
so i got tired of the cheap hef932 case it wasnt big enough for liquid it was loud and it was just plain ugly so i found this on craigs for $150 luckly i was gonna order the silverstone tj07 but i found this case just as nice as it is quiet bad air flow though but it works just as well as the hef....
http://img8.imageshack.us/img8/5654/001fu.jpg
http://img339.imageshack.us/img339/1715/002xdg.jpg
http://img534.imageshack.us/img534/1369/003dbg.jpg
http://img687.imageshack.us/img687/3505/099o.jpg
http://img227.imageshack.us/img227/5303/103ly.jpg
http://img37.imageshack.us/img37/2505/105po.jpg
and the old case
http://img697.imageshack.us/img697/6559/0517102013.jpg:gunner:
Warfarin88 -- beautiful setup. top notch for sure
Very solid work there Warfarin, I love your use of the power supply extender where you put what looks like your fan controllers.
Do you also have LCD screens above that radiator on the side?
Supernova Black Edition
http://i120.photobucket.com/albums/o...nonEOS0103.jpg
http://i120.photobucket.com/albums/o...nonEOS0091.jpg
http://i120.photobucket.com/albums/o...nonEOS0092.jpg
http://i120.photobucket.com/albums/o...nonEOS0107.jpg
http://i120.photobucket.com/albums/o...nonEOS0089.jpg
http://i120.photobucket.com/albums/o...nonEOS0088.jpg
V2000 powah ! a few pics of my powdercoated LiLi :)
http://img4.imageshack.us/img4/2953/img1376b.jpg
Uploaded with ImageShack.us
http://img32.imageshack.us/img32/673/img1380em.jpg
Uploaded with ImageShack.us
hewi, I thouht that you sold that case or do you have second thoughts. But, it`s still very beatifull case.
I`m also starting to my build my Lian-Li PC-A05N with watercooling. There is only one problem, I need to buy case first.
I spent so many hours doing the case, and spent so many euros into the case.
I just couldn't sell it, I'll probably keep it forever, if not in use then stored away.
While I do not actively post or read this board anymore, I know Lian-Li would like for me to post these here.
http://img8.imageshack.us/img8/5630/...80x1050png.png
http://img200.imageshack.us/img200/7...eriors6476.jpg
http://img37.imageshack.us/img37/931/7286444.jpg
http://img518.imageshack.us/img518/2...viewnewpe4.jpg
http://img262.imageshack.us/img262/9...nside11rc8.jpg
cheers all :) nice builds
(sorry that these are a touch on the large size, XS should have an auto image resizer with clickable expand bar!)
The top rig in this post ^ was featured in CPU Magazine... the cable management is SUPERB and the 8-pin CPU connector is actually soldered to the back of the mobo to aid in that cable management. To Wafarin, that's amazing how you got all the features to be the exact same color instead of light variations :D
Seeing Sniipe dogg's stuff made me not want to post my pics, although I will anyway. It's a little different, there's a S-Flex at the back instead of the white Silverstone fan.
http://i930.photobucket.com/albums/a...y/IMG_7530.jpg
http://i930.photobucket.com/albums/a...y/IMG_8479.jpg
http://i930.photobucket.com/albums/a...y/IMG_8480.jpg
none.
Taskforce, i have the same case (A71F) and same top :) Is the door a Lian Li accessory ?
http://i47.photobucket.com/albums/f1...n/IMG_6128.jpg
Someday i'll take some more pictures.
mesh on the headphones even matches with the case, sweet!
If door you mean side panel, yes Lian Li makes them, called W-75BM.Quote:
Originally Posted by gmat
Thanks, bit hesitant at first but soon realized how well everything turned out.Quote:
Originally Posted by busterben
I never did post my case in this thread when it was created, here's my old (and lol current) case although I've changed all the tubes to white Primo LRT a while ago - so the pics aren't current (but they were then).
I'll post a couple of pics, if you want more you can look at my sig. . . .
http://i256.photobucket.com/albums/h...ldNov08092.jpg
http://i256.photobucket.com/albums/h...ldNov08005.jpg
http://i256.photobucket.com/albums/h...ldNov08141.jpg
http://i256.photobucket.com/albums/h...ldNov08233.jpg
http://i256.photobucket.com/albums/h...ldNov08186.jpg
My V1000 aka project Duality, tough the HD5850 is out, replaced and downgraded to a HD4870, atm air on that card, my Block will be back from nickelplating at last at the end of june.
So the GFX is at top atm and I'll change the Compressions to BP stubby's next month.
http://i48.tinypic.com/autkd1.jpg
http://i44.tinypic.com/2q8a4vb.jpg
http://i43.tinypic.com/a1li5z.jpg
http://i43.tinypic.com/14uj6rm.jpg
http://i40.tinypic.com/2e34mxv.jpg
http://i43.tinypic.com/35bfk9t.jpg
nice rig ! :eek:
Quote:
Originally Posted by hewi
Wait; wheres the ventilation for the bottom cavity and that 4x120mm radiator?
Not a pretty pic, it's actually an older one.
The system still isn't fully finished, I no longer have the 8800gt as BFG replaced it with a GTX260(woot BFG rma).
Things I need to do:
1.Make custom hdd cage
2.build fan control system
3.revise reservoir setup
4.get new wb for new card
5.powdercoat case
but otherwise it is functional just not prettied up yet.
And I think I'm the only person with a case this small with this much cooling power all internal.
2x360 rads, 2x DDC3.2 pumps 6x scythe gt-15's
http://img196.imageshack.us/img196/1623/mg1084.jpg
Silverphoenix, that's a pretty nice set-up you have going! And yes, it is shocking to see that all internal. My biggest complaint about small cases with crammed watercooling is how much of a PITA it is to change everything out, it just becomes a big intricate puzzle. Always been jealous of those big builds where the rads were in a seperate compartment and they can change parts out no problems. And yes I'm speaking to all of you TJ07 owners!
How's the sound levels in that case with 6 fans?
it's very bearable with the side panel open, but until I get the sidepanel cut If I put it on all the airflow has only one way to escape and that is the back, and it sounds like a wind tunnel haha.Quote:
Originally Posted by LogAn'sRun
I do like large cases that are easy to work with but I'm constantly going to lans and also moving back and forth from home to school and I wanted something compact, and I thought it would be a nice challenge since it is relatively easy to just buy a huge case or a MM case and just spend $$$ and bolt everything together.
Compared to my TJ09 and V2000 builds this one felt more like my 1st wc build which was all custom and required alot of modifications by hand and thinking out of the box (esp the top which I cut by hand, that was a PITA).
That's the problem I recognize with my V1000b wich has all internal Dual loops WC, on the PA120.1 who's sitting at the back, on the inside it would just take over the view on the mobo.Quote:
Originally Posted by LogAn'sRun
I have to take out my hdd's from 1 cage to be able to remove my pums so I could finally get to my mobo, graphics card changes requires to drain both of the loops, but it's fun to do the work.
Luckily I got my hands on a V2000b wich I'm working at, on a slow tempo, so that will be my main pc with 3 loops watercooling :yepp:
Doesn't having the res set up like this kinda defeat the point of having it?Quote:
Originally Posted by silverphoenix
I mean, it hardly helps bleeding the loop with res inlet tucked in like that.
How long did it take to fill and then bleed?
About 1 hr total, just run one pump that's all. The reservoir is actually doing exactly what it's name implies I mean it's not a bleeder just a reservoir, it holds extra water so the small amount of evap and leeching from the lines means I don't have to fill up constantly. It also looks better than a fill line attatched to a plastic T.Quote:
Originally Posted by bobruto
If I was still benching I would have used my old benchsetup with my Colder quick releases etc but this is a tower not something I'm going to be reaching into constantly. I usually do a full teardown/cleanup/tuneup of my system once a year and this isn't that bad. I haven't had a need to "reach" into the crevices of my setup. I'm quite proud of the space efficiency that I was able to create. My goal was to do something no one had done before and be a challenge. I like my end results to me just getting a TJ07 or MM case and just positioning the wc parts in a different way from the hundreds of others who had done it before bores me.
But right now funds are holding me back from fully finishing it sadly... if you've seen my build log it never finished. I don't have the endless pockets where I can finish builds and have the hardware at the leading edge like most builders but I make do with what I've got.
Just seen this thread so thought I would post mine up, has slightly changed in the last couple of weeks though, have since got a 5970 to replace the 4870x2 in the pics and am awaiting the EK Nickel block for it, also have the Supreme HF Nickel+Plexi coming too. SATA Power cables are also being braided as well to match the rest:
http://paulyd.co.uk/images/PC/DualLoop/IMG_8544.jpg
http://paulyd.co.uk/images/PC/DualLoop/IMG_8546.jpg
http://paulyd.co.uk/images/PC/DualLoop/IMG_8540.jpg
pls take some more pistures :clap:
Quote:
Originally Posted by .:R32
A quick sneak peak into my almost finished PC-A77B :D
http://rapidshare.com/files/397407800/Side_finished.jpg
More will follow once done cabling :D
I really like those wheels/casters on that PC-A77B, luke997. Do they come with it or did you order/buy them separately?
***EDIT***
Nevermind, I managed to find a number of places that sell them. I think I may have to pick up a set.
Some pics I took when it was finished.
http://www.ibisgaming.com/media/SDC10246sm.JPG
http://www.ibisgaming.com/media/SDC10261sm.JPG
Sorry forgot there is no resize here. I will try to update them with smaller pics later today.
There we go!
If you're lucky you may also find the black sets.Quote:
Originally Posted by Captain_Harlock
Unfortunately black were sold out when I was getting mine.
Hey Ladys im new here so here my 3 Lian Li's :welcome:
PC-A70F,PC-B25F and V351 still in work.
http://www.abload.de/img/24qdwv.jpg
http://www.abload.de/img/232bja.jpg
http://www.abload.de/img/00254i3.jpg
http://www.abload.de/img/3zb2x.jpg
http://www.abload.de/img/594kv.jpg
looks a bit crooked but not finish!:D
http://www.abload.de/img/4psue.jpg
My Lian-Li PC-A77F
280 Rad in the top, 360 Rad in the front. CPU, NB/SB, VRM, VGA all watercooled.
http://img683.imageshack.us/img683/2876/p6140184.jpg
http://img243.imageshack.us/img243/5020/p6140187.jpg
http://img188.imageshack.us/img188/2687/p6140192.jpg