[HwX] OCZ ReaperX HPC Enhanced Bandwidth DDR3-1333 6-5-5 2048MB Kit

Yesterday I get my Christmas gift to myself ;)

2 Gig of OCZ ReaperX HPC DDR3-1333 6-5-5
I ordered this mem in hope for Micron D9GTR Chips

The Mem looks very fine and the Heatpipes do there work great!

http://www.hardwarextreme.de/joomla/...1333/1_800.jpg

http://www.hardwarextreme.de/joomla/...1333/2_800.jpg

http://www.hardwarextreme.de/joomla/...1333/3_800.jpg

http://www.hardwarextreme.de/joomla/...1333/4_800.jpg

http://www.hardwarextreme.de/joomla/...1333/5_800.jpg

http://www.hardwarextreme.de/joomla/...1333/6_800.jpg

But the best!

http://www.hardwarextreme.de/joomla/...rX1333/spd.jpg
(look at Manufracture)

The Mem has Micron Chips under the HS :eek:

In hope for some good results arround 1600 oder 1700 CL7 I test the memory yesterday and today.

My face make this :shocked: if I see these nice results on my rig.

Intel Core 2 Extreme QX6700 watercooled
Gigabyte P35T-DQ6 no mod
2 Gig OCZ ReaperX HPC DDR3-1333
PoV 8800 GT VCore modded watercooled
2x320 Gig Samsung 16 MB Cache RAID0
WinXP SP2 no Tweakes

1700 MHz | 6-5-5-24 | 2,14 V
32m Stable

http://www.hardwarextreme.de/joomla/...3_1700_800.jpg


1800 MHz | 7-6-5-24 | 1,92 V
32m Stable


http://www.hardwarextreme.de/joomla/...3_1800_800.jpg

http://valid.x86-secret.com/show_oc.php?id=288756

€dit:

1900 MHz | 7-6-5-24 | 2,18 V
1m Stable

http://www.hardwarextreme.de/joomla/...8001900hp2.jpg


Little Update with 790i

http://www.hardwarextreme.de/dave/Ex...000-876-19.jpg

Only 1,9 V set in BIOS

Nice, especially DDR3-1800 7-6-5-24 with just 1,92 V. :yepp:

Looks really good :).

Keep pushing it.

did you try more volts?
especially with 655 im curious if you can get more :D

the heatspreaders look nice... same screw-clamp mechanism we use, seems like everybody is copying it now :P
the heatpipes look nice, can you fit two sticks next to each other or do the heatpipes block each other?
did you take the heatspreaders off? im curious if the heatpipes make direct contact with the memory chips.

Quote:

---

Originally Posted by saaya

did you try more volts?
especially with 655 im curious if you can get more :D

the heatspreaders look nice... same screw-clamp mechanism we use, seems like everybody is copying it now :P
the heatpipes look nice, can you fit two sticks next to each other or do the heatpipes block each other?
did you take the heatspreaders off? im curious if the heatpipes make direct contact with the memory chips.

---

I didn't try more Volts today but in the following week I will do this definatly ;)

I can't fit two sticks next to each other the Heatpipes will block.
I didn't remove the HS but from the side you see that the HPs have direct contact to the Chips.

score is nice :D but this HS is very ugly :(

Quote:

---

Originally Posted by Fatalbert

score is nice :D but this HS is very ugly :(

---

???

I think the HS is the most beautiful what you can get
and the HS is not only beautiful, ths HS works great!

Quote:

---

Originally Posted by Kabauterman

???

I think the HS is the most beautiful what you can get
and the HS is not only beautiful, ths HS works great!

---

it is my opinion ;)

first reaper's have better HS and they works too :D

but most important isn't how they look like but how good they works :D

Hmm, it looks like someone goofed up on the SPD there. No worries about the RAM though. We can help you flash the SPD properly if you like.

Damn...kabauterman wish me luck man! you're so * lucky! :D
Pretty nice kit there.

@Andy:
Is it normal to find D9GTR ICs on these kits ?

Quote:

---

Originally Posted by BenchZowner

Damn...kabauterman wish me luck man! you're so * lucky! :D
Pretty nice kit there.

@Andy:
Is it normal to find D9GTR ICs on these kits ?

---

I think there is many room to get better Scores but my CPU dosn't goes higher :shakes:

the question to andy I will ask too ;)

If there are Micron's on each of this Kits this will be a secret tip to get cheaper and very fast DDR3 Mem.

no kidding you are lucky Kabauterman, those clocks are damn impressive for a PC3-14400 kit let alone a for 'budget' PC3-10666 sticks. nice find and good luck with them...who would have guessed Micron on those guys.

Quote:

---

Originally Posted by saaya

did you try more volts?
especially with 655 im curious if you can get more :D

the heatspreaders look nice... same screw-clamp mechanism we use, seems like everybody is copying it now :P
the heatpipes look nice, can you fit two sticks next to each other or do the heatpipes block each other?
did you take the heatspreaders off? im curious if the heatpipes make direct contact with the memory chips.

---

Please don't ask our customers to break warranty and posssibly kill their memory.

Sheesh, Tony, that was part of their marketing strategy.
Over wise nice memory and heatspreader is looking better than old Reapers due to dual heatpipe and alu fins.

we use a TIM that sets like concrete, if anyone tries to pull the heatspreaders off I almost guarantee you will pull IC's off also.

The heatpipes touch the IC's and yes on some boards you may find the heatspreaders are too thick for the dimms to fit side by side.

We have also released an 8GB kit with the same IC's but featuring standard spreaders for those who like 8GB ;)

Quote:

---

Sheesh, Tony, that was part of their marketing strategy.

---

LOL had to laugh at that one...seriously though I don't talk about Cell shock and I sure don't ask (suggest) their customers break the warranty on their modules.

Quote:

---

Originally Posted by 3oh6

no kidding you are lucky Kabauterman, those clocks are damn impressive for a PC3-14400 kit let alone a for 'budget' PC3-10666 sticks. nice find and good luck with them...who would have guessed Micron on those guys.

---

this will be definatly no budget sticks ;) 270 € is only a little cheaper that the "highend" mem

I pray for Micron and I will be Heard ;)

@ Tony:

TIM?
It isn't possible to pull of the HS?
thats bad but good to know

Quote:

---

Originally Posted by Kabauterman

(look at Manufracture)

The Mem has Micron Chips under the HS :eek:

---

It seems Tony simply forgot to hide a real Manufacturer ID in the original SPD image from Micron :D

That is not a reason to worry, because Crucial leaves Micron’s Manufacturer ID sometimes too.

Quote:

---

Originally Posted by Tony

Please don't ask our customers to break warranty and posssibly kill their memory.

---

ahhh you got me man... my plan was to make him fry that memory to annoy you, i was working out this perfect plan for months, but damn, you caught me... :lol:
seriously tony, its christmas/new year, i would have expected you to be less grumpy in this season :P

Quote:

---

Originally Posted by Tony

seriously though I don't talk about Cell shock and I sure don't ask (suggest) their customers break the warranty on their modules.

---

good for you :up:

would you mind showing me where i asked him to break his warranty?

It's new year's eve guys...chill out.
And we all know we're not 13yrs old kids to fool around :D

Quote:

---

Originally Posted by Tony

if anyone tries to pull the heatspreaders off I almost guarantee you will pull IC's off also.

The heatpipes touch the IC's and yes on some boards you may find the heatspreaders are too thick for the dimms to fit side by side.

---

are you serious? :rolleyes:
i'm planning to use 8Gb ReaperX DDR2 on X38 board, cooling with MIPS RAM Freezer, and hope to run them near 1100MHz with 2.1-2.2V.
http://www.ncix.com/products/index.p...nufacture=MIPS <- this one
so i need to pull the heatspreaders off, and i even agree with loosing warranty.
what would you recommend?

hmmmm maybe ocz can remove the heatspreaders for you...
or maybe on the reaperx ddr2 the heatspreaders arent glued on so you can remove them?
but this is a bit offtopic, id recommend you to pm tony andyocz or ryderocz, im sure they can help you :)

Quote:

---

Originally Posted by rioja

are you serious? :rolleyes:
i'm planning to use 8Gb ReaperX DDR2 on X38 board, cooling with MIPS RAM Freezer, and hope to run them near 1100MHz with 2.1-2.2V.
http://www.ncix.com/products/index.p...nufacture=MIPS <- this one
so i need to pull the heatspreaders off, and i even agree with loosing warranty.
what would you recommend?

---

Tony works for OCZ Technology rioja ;)
If you really want to lose your warranty by opening up the HS...you need to remove the screws ( obviously! :D ) and heat them up with a hair dryer to about 113F/45C and then progressively "remove" the heatspreaders with the help of a flat-head screwdriver...real slow.

Hmmm, sorry to further hijack this thread but I bought the PC2-6400 ReaperX HPC Enhanced Bandwidth 4GB Dual Channel kit over the weekend and was hoping to remove the HS from the modules so I could run the RAM in two slots that are side by side.

Seems I screwed up there if the HS won't come off without ripping the ICs off!

hmmm maybe you can slightly bend the fins of the heatpipes so they kinda slide into each other like a zip? ask the ocz guys, they should know a trick or two :)

Those sticks is really impressive and it is a really good kit you have there 1800 with that volt, either good gtr og normal/good gts.

Keep pushing it.

:shocked: :shocked: :shocked: :shocked:


Howly :banana::banana::banana::banana::banana: mate thats awsome!


1800Mhz from 1333MHz rated memory?


Nice :clap: :up: .


What's the price for sutch memory? :D




How do you actually begin with the overclocking? First you seek the memory's max performance and then the cpu?

Also how do you know when you hit the barrier of the Volts and memory timings? IS there is very good guide online from where u learned all this?

Saaya, im not grumpy, just anoyed at you posting in OCZ threads, talkig about removing spreaders etc when you are a cellshock rep....I stay out of your threads so please stay out of ours..that way we will get along fine.

I sometimes think you forget you work for a competitor to OCZ with how you post etc.

Regards 8GB kits they will not do as high clocks due to MCH load, I will try to get more info for you all

Happy New Year

Damn, nice results :D:D

Quote:

---

Originally Posted by Tony

Saaya, im not grumpy, just anoyed at you posting in OCZ threads, talkig about removing spreaders etc when you are a cellshock rep....I stay out of your threads so please stay out of ours..that way we will get along fine.

I sometimes think you forget you work for a competitor to OCZ with how you post etc.

---

why dont you pm me about this?
howcome you have to make it a public drama and accuse me of making ocz customers void their warranty?

so basically if i wouldnt be a cellshock rep my post would be fine, right?
but cause i work for cellshock its not...

if you or other reps see your presense on theese forums as work and representing and advertizing the company you work for and nothing else... im sorry for you/them. I personally refuse to reduce my presense on these forums to representing my employer.if YOU have a problem with this, why dont you just pm me about it. if OCZ has a problem with this why dont they contact me? if you want to continue discussing this please keep it to pms since im tired of you creating forum dramas.

now back to topic, hope you guys can figure out a way to use several of those heatspreaders in slots that are right next to each other, and im looking forward to see more results from kabauterman, this kit seems to clock quite nicely :D

@Kabauterman: Holy cr@p, that kit is awesome ... ! :eek: Raise the voltage, raise the voltage ! :D Have you tried PL 6 ? My only complaint is the huge heatsinks ... Might look cool ;) :), but why taking so much place ? ...

Hope we hear more from you ... :up:

Quote:

---

Damn, nice results

---

Thanks man ;)

Quote:

---

Howly mate thats awsome!
1800Mhz from 1333MHz rated memory?

Nice .

What's the price for sutch memory?

How do you actually begin with the overclocking? First you seek the memory's max performance and then the cpu?
Also how do you know when you hit the barrier of the Volts and memory timings? IS there is very good guide online from where u learned all this?

---

I have the CPU over a Year so I know the limits of it ;)

I set the Memory to 1800 7-6-5 @ 2,1 V and runs SuperPi32m to the Voltage with it is unstable ;)
costs 270 € in germany

Quote:

---

@Kabauterman: Holy cr@p, that kit is awesome ... ! Raise the voltage, raise the voltage ! Have you tried PL 6 ? My only complaint is the huge heatsinks ... Might look cool , but why taking so much place ? ...

Hope we hear more from you ...

---

Raising voltage only brings me a little more @ 6-5-5
but @ 7-6-5 it sucks because my CPU has FSB Wall @ 480 MHz
:-(

im sure you dont need 2.1v for 1800 765! 1.9-1.95v should be enough for that. maybe you need more vmch...what vmch are you running atm? your using the dq6 right? hmmm too bad command rate 1t doesnt work on this board...

did you use this pll option 2 or whatever its called?
michal said that setting was needed to get high mem speeds on this board.

VMCH is @ Auto
I mean I start to test 1800 7-6-5 @ 2,1 and I tune down the Voltage :)

Yes board is P35T-DQ6
VMCH is a little crazy at my board ... 1800 @ Auto runs 1800 @ +0.100 V dosn't works but 1800 @ +0.200 V works too

I have set the Memory Options to Option 2
but with FSB Wall I can't get higher clocks

I will test it with the VMCH too.... with +0,200 i can boot and the system works. But with 0,100 it doesn't work too.... but i did'nt try with +0,000 (normal?).

Or is the autofunction or "normal" the same like the asusboards - automatically overvoltage?


Edit:

With "normal" (without VMCH-raise) the system boots and works fine too..... I think the board raise the VMCH automatically.....

saaya

I PM'd you....

Quote:

---

Originally Posted by SeLecT

I will test it with the VMCH too.... with +0,200 i can boot and the system works. But with 0,100 it doesn't work too.... but i did'nt try with +0,000 (normal?).

Or is the autofunction or "normal" the same like the asusboards - automatically overvoltage?


Edit:

With "normal" (without VMCH-raise) the system boots and works fine too..... I think the board raise the VMCH automatically.....

---

I think the GB boards do not overvoltage automaticly ;)
Auto = +0.000 V

Sure?

But why i works and with +0.100 not?

Tomorrow I will do some tests with 2.25 V and 6-5-5 ;)
Hope for 1800 :-D

Good news regarding the heatsinks! I just received my DDR2 with identical heatsinks and was easily (albeit very carefully) able to lever them off with a ruler after putting the RAM on the radiator for a couple of minutes.

:D

Quote:

---

Originally Posted by Kabauterman

VMCH is @ Auto
I mean I start to test 1800 7-6-5 @ 2,1 and I tune down the Voltage :)

Yes board is P35T-DQ6
VMCH is a little crazy at my board ... 1800 @ Auto runs 1800 @ +0.100 V dosn't works but 1800 @ +0.200 V works too

I have set the Memory Options to Option 2
but with FSB Wall I can't get higher clocks

---

I finding read points on my friend's Gigabyte-X38 DQ6 about a mounth ago..

Default VMCH was 1,25v and I think same as Gigabyte P35 too..
So, +0,200v is nothing (1,45v) :D , Keep pushing harder!:up:

Quote:

---

Originally Posted by roadie

Good news regarding the heatsinks! I just received my DDR2 with identical heatsinks and was easily (albeit very carefully) able to lever them off with a ruler after putting the RAM on the radiator for a couple of minutes.

:D

---

oh nice! and what ICs are there, powerchip?

Quote:

---

Originally Posted by rioja

oh nice! and what ICs are there, powerchip?

---

I assume they are the same as used in the G.Skill PC8000 kit. However, the chips have OCZ and a couple of other lines of text on them which don't give any hits when searching on Google so I can't be sure.

Quote:

---

Originally Posted by over@locker886

I finding read points on my friend's Gigabyte-X38 DQ6 about a mounth ago..

Default VMCH was 1,25v and I think same as Gigabyte P35 too..
So, +0,200v is nothing (1,45v) :D , Keep pushing harder!:up:

---

hmmm not necessarily... on the x48 dq6 default vmch is 1.45v... and i think on the x38 one its 1.45v as well... but im not sure about the x38 :D

Yesterday I test a little bit bur I can not get over this value
and 32m isn't stable with any voltages, It is to near to the FSB wall.

€: 1M updated in Post 1

€: 2,18 V

One German guy @ hardwareluxx has unmount the HS and founds D9GTN on his 2 gig ReaperX HPC EB DDR3-1333, he said his modules do not run @ the same clocks than mine, he tests 1800 7-6-5 with 2,0 V and have no succes

at least he has nice heatsinks)

Quote:

---

Originally Posted by Kabauterman

One German guy @ hardwareluxx has unmount the HS and founds D9GTN on his 2 gig ReaperX HPC EB DDR3-1333, he said his modules do not run @ the same clocks than mine, he tests 1800 7-6-5 with 2,0 V and have no succes

---

so compare the serial numbers and such and see if you can figure out what the batch difference is, so people can figure out what the good stuff is, and what the ok stuff is.

does somebody knows what the Micron D9GTN are?

He said 1800 isnt possible @ P5E3
but 1600 7-6-6 runs @ 1,92 V

As far as I know all the Reaper X modules 1333 6-5-5-20 are built with micron, now not all are going to do 1800+ and remember many boards will not do 1800+ so this may either be a board not doing 1800 or the dimms do just shy of thast or the setup is wrong to do it.

DDR3 at 1800+ is at this time a fine art on many boards, just because you see a few users on the forum doing it does NOT mean every kit and every board will do it...try to remember this.

Thanks for the information Tony ;)
Always appreciated

is this the same one (but 4GB instead of 2GB)
http://www.amazon.com/exec/obidos/tg...BZJQ6&v=glance
the price looks sexy but i have a feeling that it's not the same

realy nice Price for the 4 GB Kit...
why there are no such sexy prices for DDR3 in Germany? that suxx!

I decided to buy a little Conroe CPU with a high FSB Wall to test my DDR3s over 2000 MHz... I take a look for a E6750 or something

It's awesom memory!

For 24\7 i use 900 7-6-5:

http://www.topmods.net/nord/ocz_900_pi32_1.png

Quote:

---

Originally Posted by Nordling

It's awesom memory!

For 24\7 i use 900 7-6-5:

http://www.topmods.net/nord/ocz_900_pi32_1.png

---

Hey nice ;)

what Voltage do you use for this settings?

I love this Memory :D :banana: :worship:

do you take a look under the HS?
are there D9GTN or D9GTS?

havent read the entire thread :)

But looks quite nice - I'd deff try to set more agressive timings in bios... PL: 5 or 6 should benefit 600-1000MB/s ;)

Quote:

---

what Voltage do you use for this settings?

---

2V in bios, 1,94 real

Quote:

---

are there D9GTN or D9GTS?

---

D9GTR

Quote:

---

Originally Posted by Nordling

2V in bios, 1,94 real


D9GTR

---

I mean GTR ;)
thats realy nice, guy here from germany has found GTN
and his kit dons't clock so well

Kabauterman

http://www.topmods.net/nord/ocz_ddr3_pn.jpg

Quote:

---

Originally Posted by Nordling

Kabauterman

http://www.topmods.net/nord/ocz_ddr3_pn.jpg

---

PartNumber = PN
thats the same @ each of them
the SN is on the back of the packing

some like XXXXXX-XXXXXXX-XXXXXX

when considering results like these

http://www.legitreviews.com/images/r...11/stalker.jpg

http://xtreview.com/images/DDR3-1600&#37;20SDRAM/excel.png

http://www.xbitlabs.com/images/memor.../photoshop.png

taken from these tests:
http://www.legitreviews.com/article/511/7/
http://www.anandtech.com/memory/showdoc.aspx?i=2989&p=8
http://xtreview.com/review217.htm
http://www.xbitlabs.com/articles/memory/print/ddr3.html
http://www.anandtech.com/printarticle.aspx?i=2991

and considering the tests conclusions

Quote:

---

We set out to see if there was a significant difference between DDR2 and DDR3 memory on both of the Intel P35 Express based ASUS motherboards and found that there really isn't. Right now there is no clear call as to what would be better for gamers and enthusiasts as it depends on your tastes. As with all new technology it will only get better as time goes on and with memory companies hitting ~1,800MHz on the initial 512Mb DDR3 IC's it shows great promise for the new memory type

---

Quote:

---

True, on the one hand DDR3 SDRAM cannot take the system performance to another level. The tests showed that the newest DDR2 SDRAM can provide the same level of performance as the currently available DDR3 SDRAM. In fact, the results of our benchmarks indicate an approximate parity between systems equipped with DDR2-1066 SDRAM and DDR3-1333 SDRAM. And since DDR3-1333 SDRAM is not only the fastest memory in the market today, but also the fastest memory that Intel P35 based platforms support, it doesn’t make any sense even for computer enthusiasts who care about every additional percent of extra performance to transfer to DDR3 SDRAM at this time

---

Quote:

---

According to the obtained tests results , neither DDR 3-1333 with the extremely low latency north DDR 3-1600 could ensure unambiguously better speed, than DDR2 memory. Although in some tasks, for example in games, during video coding and in Excel new DDR3 SDRAM shows higher performance, but there is a large quantity of tasks, where the picture is reverse

---

and keeping in mind that overclocking to FSB's like Nordling had (450Mhz) doesnt need more than DDR2@1066 (1066/4=266*2=533) which means that if you'r not hitting more than 500FSB any RAM speed more than 533 (1066) is pointless and will be slowed down by the CPU

now can someone please explain for me why do I need DDR3? :help:

note: lets keep the "extreme" chips aside
note2: DDR3@1333 (666) is a little bit acceptable since some chips may go above 530mhz FSB (not with chips like the Yorkfields of course) but higher speed DDR3 is the question here (and DDR3@1333 when aiming for chips like Q9450)

no one needs DDR3 Realy but
you want to have it ;)

DDR3 1800 7-6-5 is a lot faster than the DDR3-1333 CL7 in your test result ;)

Quote:

---

Originally Posted by Kabauterman

no one needs DDR3 Realy but
you want to have it ;)

DDR3 1800 7-6-5 is a lot faster than the DDR3-1333 CL7 in your test result ;)

---

Noooo not at all :rofl:

Regarding DDR2 vs. DDR3
The thing is, DDR2-1200 CL4 is possible, but not guaranteed, DDR3-1800 CL7 is more likely to happen... Now compare the two of them, and keep in mind, subtimings REALLY has a great influence... Performance level can easily do 1GB/s...

Once I get home to my appartment I'll test:
DDR2: 400-420 CL: 3-2-2-4, DDR3: 500-530 CL: 4-3-2-4
With most agressive subtimings, I'll do 32M with each...
Then I'll match the CPU frequency with DDR3, put agressive timings on the sticks as well, and then you'll see the difference ;)

Quote:

---

the SN is on the back of the packing

some like XXXXXX-XXXXXXX-XXXXXX

---

Where i can see it?

you are talking like if there was no price difference
If DDR3 was more expensive….much more expensive…I’ll buy it, but it’s insanely expensive, just not worth it, not the best bang/buck, not even the best bang
I guess it was released too early that’s all, it’s still beta, the final will be in 2009 and that’s when it’ll be much cheaper/better

I miss those days when the only thing used to measure memory performance is the size

Dude1: what RAM do you have?
Dude2: 1GB
Dude1: OMG :shocked: what are you doing with these babies, I only have 512MB :shrug:
dude1: don't forget I'm a graphic designer and I need the best RAM outthere (he means biggest only)

More Power:

http://www.topmods.net/nord/q6700_3600_32m_666.png

Hah Faster rams, slower chipsets :rolleyes:
I dig year an a half old result with i975 and 1:1 ram
Was totally unoptimized run with 24/7 OS and lots of processes
Just comparing performance . . . with post #53
http://img96.imageshack.us/img96/481...3700qf8.th.jpg

These "DDR3-1333 6-5-5 2048MB Kit" looks real good for the price . .

up

http://www.topmods.net/nord/pi32_3600_13_04.png

sub 13min coming soon

32M is nice, but for real stability show some 600+ % dual memtest ;)

very funy that they are rated to 1333 with d9gtr, i don't understand ocz :shrug:

btw, congrats to the memorys mate :)

Quote:

---

very funy that they are rated to 1333 with d9gtr, i don't understand ocz

---

It is such marketing course, only the first parties will have such chip. So already was with DDR2

Quote:

---

Originally Posted by Achill3uS

32M is nice, but for real stability show some 600+ % dual memtest ;)

very funy that they are rated to 1333 with d9gtr, i don't understand ocz :shrug:

btw, congrats to the memorys mate :)

---

but it is DDR3 Memory with (nearly) DDR2 Latencys @ 1333 MHz ;)

Quote:

---

Originally Posted by Kabauterman

but it is DDR3 Memory with (nearly) DDR2 Latencys @ 1333 MHz ;)

---

noo, it's really DDR3? :lol: just kidding...
i mean, you could sell it for 1800mhz kits much more money, but Nordling was right, it's a big marketing... ocz like this method...

Quote:

---

Originally Posted by Achill3uS

noo, it's really DDR3? :lol: just kidding...
i mean, you could sell it for 1800mhz kits much more money, but Nordling was right, it's a big marketing... ocz like this method...

---

what goes arround with you? :confused:
I know what mem it is , I am the Thread starter -.-

what I mean is that you say D9GTR on 1333 Mem
but 1333 Mem can also be 7-7-7 or 9-9-9
but this is mem is 6-5-5 and that is what you don't find at other 1333 Modules.
The Price is also not so far away from 1600 Mem.

Little Update with 790i ;)

http://www.hardwarextreme.de/dave/Ex...000-876-19.jpg

Only 1,9 V set in BIOS

firas,

the stalker test is only showing ddr3 1500 777, most ddr3 kits can run 1800 cas7 and 1900 cas8, which is faster. sure, you wont suddenly see a huge boost of 5fps in stalker, but its faster than ddr2. if the difference is worth the extra money... thats what everybody has to decide on his own...

photoshop cs2, do you notice something with the results?
they are all identical, even ddr2 800 555.
so this is rather a photoshop benchmark showing it doesnt really scale with memory bandwidth, nothing else.

Quote:

---

DDR3 SDRAM cannot take the system performance to another level

---

at stock speeds, i actually agree... but when you overclock ddr3 its the way to go... why do you think everybody is benching ddr3 atm?
it IS faster than ddr2...

Quote:

---

and keeping in mind that overclocking to FSB's like Nordling had (450Mhz) doesnt need more than DDR2@1066 (1066/4=266*2=533)

---

it actually NEEDS less than that, but it DOES scale with more bandwidth :)

Quote:

---

Originally Posted by Kabauterman

Little Update with 790i ;)

http://www.hardwarextreme.de/dave/Ex...000-876-19.jpg

Only 1,9 V set in BIOS

---

if some reapers have D9GTR and some D9GTN, that kit is definately with D9GTR :D

Quote:

---

Originally Posted by Nordling

2V in bios, 1,94 real

---

your p5k3 undervolts? :eek:
are you sure?
i have a couple of p5k3 boards and know a few people with it too, and this is the first time i heard one of them UNDERvolts vdimm, lol :D
is it made in taiwan or china?

Quote:

---

Originally Posted by saaya

firas,

the stalker test is only showing ddr3 1500 777, most ddr3 kits can run 1800 cas7 and 1900 cas8, which is faster. sure, you wont suddenly see a huge boost of 5fps in stalker, but its faster than ddr2. if the difference is worth the extra money... thats what everybody has to decide on his own...

photoshop cs2, do you notice something with the results?
they are all identical, even ddr2 800 555.
so this is rather a photoshop benchmark showing it doesnt really scale with memory bandwidth, nothing else.

at stock speeds, i actually agree... but when you overclock ddr3 its the way to go... why do you think everybody is benching ddr3 atm?
it IS faster than ddr2...


it actually NEEDS less than that, but it DOES scale with more bandwidth :)

if some reapers have D9GTR and some D9GTN, that kit is definately with D9GTR :D

---

Hey, yes the results impress me to but there are some strange problems with the 790i Chipset.

My favorite Results 1800 7-6-5 aren't stable, but the System dosn't freeze or do not boot, the Display makes some big problems with this settings. I can take a Photo later ... that is realy strange... :shrug:

Some fun with CL7 :-)

http://img59.imageshack.us/img59/9617/1000cl7jm4.jpg

That's hectic. Volts?

Quote:

---

Originally Posted by I34z1k

That's hectic. Volts?

---

Check Screenshot..bottom of CPU-z memory window.. 2.15V in bios.

Dam sorry there :P Blind this side :P

I have also tested CL6 but I can't get over my P35T-DQ6 Result (850 MHz)

:-(

WoW:up:

great memory