580MHz FSB Air Cooled with Wolfdale on G33 Chipset

Printable View

12-06-2007, 09:52 AM
olDirdey

600MHz FSB Air Cooled with Wolfdale on G33 Chipset

Want to share my Results with you ;)

Got 580MHz max FSB with E8500 Wolfdale on my HTPC mainboard. It´s a Gigabyte GA-G33M-DS2R

CPU is Aircooled with an Freezer 7 Pro :eek:

Mainboard is stock without mods.

http://freenet-homepage.de/stullen_a...U/cpu-4353.JPG

http://valid.x86-secret.com/show_oc.php?id=278277

Got another wolfdale, a E8400 and give him a try. Max FSB on Air was 570MHz. While using setfsb and switching up to 575mhz fsb the system freezes.

http://freenet-homepage.de/stullen_a...U/cpu-3990.JPG

http://valid.x86-secret.com/show_oc.php?id=279136

Little update, new CPU E8200 on air with boxed cooler.

http://valid.x86-secret.com/cache/303518.png

http://valid.x86-secret.com/show_oc.php?id=303518
12-06-2007, 10:03 AM
Johnny Bravo

Damn these E85's are looking better by the day ;)
12-06-2007, 10:06 AM
metro.cl

:o impressive
12-06-2007, 10:07 AM
AliG

looks nice, lets just hope the retail perform this good, and especially that the lower models oc nicely too (ie lets hope no e6750 like products, only e6850 like if you get what I mean)
12-06-2007, 10:12 AM
olDirdey

It´s insane. This is the cheapest Board in the house but the board wich perfoms best with wolfdale cpu.

Before it runs on Asus P5K-E, Asus Maximus Formula and Foxconn Mars but the max FSB was between 530-550MHz.

Tomorrow I will give a short test on Gigabyte P35 DQ6.
12-06-2007, 10:20 AM
Solarfall

damn thats impressive.. now i really cant wait for these chips to hit the shelves
12-06-2007, 11:55 AM
ownage

580fsb on a G33 chipset mATX board and the board has half multiplier support? :confused:
12-06-2007, 11:57 AM
olDirdey

Bios for half multiplier ist just a few days old. It´s version F7. I posted a few weeks ago in gigabyte forum that there is no bios for half multis and tadaa, one week later i got it ;)
12-06-2007, 04:33 PM
Misko

Bravo for fsb on crapy mobo :up:
12-06-2007, 04:40 PM
erickwok

Quote:

Originally Posted by olDirdey

Want to share my Results with you ;)

Got 580MHz max FSB with E8500 Wolfdale on my HTPC mainboard. It´s a Gigabyte GA-G33M-DS2R

CPU is Aircooled with an Freezer 7 Pro :eek:

Mainboard is stock without mods.

http://freenet-homepage.de/stullen_a...U/cpu-4353.JPG

http://valid.x86-secret.com/show_oc.php?id=278277

Wa!!!!
580 FSB air cooled cpu:clap:
12-06-2007, 04:45 PM
Speederlander

How stable was this? Did it boot into this or was it set after? Can it run any apps? Also, what memory did you use there?

Seems like 600+ FSB should be possible with phase.
12-06-2007, 05:29 PM
DFI pit bull

Quote:

Seems like 600+ FSB should be possible with phase.

For sure. 580 on air is simply amazing.

Also hope that Yorkfield will have an improved fsb over Kensfield.
12-07-2007, 12:44 AM
Oliver

Looks really good :).

Keep pushing it.
12-07-2007, 08:27 AM
Chri$ch

i put the CPU today on a Gigabyte P35-DQ6, max FSB SuperPi 1M 570Mhz! (on air)

On Foxconn Mars max FSB 1M 555Mhz (it need ~1.9v vNB :( )

http://www.muenster.de/~e30pics/Bild...erPi-1M-04.jpg

edit: on DQ6

http://www.muenster.de/~e30pics/Bild...erPi-1M-05.jpg

http://valid.x86-secret.com/show_oc.php?id=278685
12-07-2007, 09:50 AM
MorGo7h

Is it 32M/orthos stable?
12-07-2007, 05:43 PM
olDirdey

Quote:

Originally Posted by Speederlander

How stable was this? Did it boot into this or was it set after? Can it run any apps? Also, what memory did you use there?

Seems like 600+ FSB should be possible with phase.

Running it with 2GB of PC2-8500 ballistix. Boot up with 560MHz and then used setfsb. But never tried to but with higher fsb. Tomorrow I can test a E8400 and will try how stable it is at high fsb

Quote:

Originally Posted by DFI pit bull

For sure. 580 on air is simply amazing.

Also hope that Yorkfield will have an improved fsb over Kensfield.

Normally I have running a Q9550 on this board. It can do max 463MHz on this board. With 464MHz it will boot but is only super pi 1m stable. On Asus P5K it can do max 471MHz fsb.
12-07-2007, 05:46 PM
adamsleath

haha mATX classic.
12-08-2007, 07:55 AM
Prodigys

Quote:

Originally Posted by Chri$ch

i put the CPU today on a Gigabyte P35-DQ6, max FSB SuperPi 1M 570Mhz! (on air)

On Foxconn Mars max FSB 1M 555Mhz (it need ~1.9v vNB :( )

http://www.muenster.de/~e30pics/Bild...erPi-1M-04.jpg

edit: on DQ6

http://www.muenster.de/~e30pics/Bild...erPi-1M-05.jpg

http://valid.x86-secret.com/show_oc.php?id=278685

I love the speed with that needed VCore !
Just great CPU's...
12-08-2007, 08:24 AM
jimmsch

This is VERY promising! I really hope the retail versions of these chips do something close to these numbers.

I do have one question though. Why doesn't anybody post the temps on these OC threads? I sure would like to know what the core temps were at 1.34vCore and 580 fsb with 7.5 multi for a speed of 4.3Ghz.
12-08-2007, 11:25 AM
Zeus

Quote:

Originally Posted by jimmsch

This is VERY promising! I really hope the retail versions of these chips do something close to these numbers.

I do have one question though. Why doesn't anybody post the temps on these OC threads? I sure would like to know what the core temps were at 1.34vCore and 580 fsb with 7.5 multi for a speed of 4.3Ghz.

I think you're missing the point, this topic was started to show what max fsb is possible on new 45nm cpu's.

Temps are somewhat irrelevant and depent to much on cooling solution and ambient temps, current cpu's can still be stable over 70C.

What does it tell you if he gets 30C idle? :shrug:
12-08-2007, 11:37 AM
HousERaT

These wolfdale chips look to be something really special.
12-09-2007, 02:52 AM
Thanh55

Just amazing, I got my similar but never stable evan @ 350. How do you set the voltages? E'rythings max out?
12-09-2007, 03:38 AM
SeLecT

Nice FSB and CPUs ;)

What is the maximum clock with the E8400?
12-09-2007, 04:49 AM
olDirdey

Quote:

Originally Posted by Thanh55

Just amazing, I got my similar but never stable evan @ 350. How do you set the voltages? E'rythings max out?

Nothing is maxed Out. vMCH is Normal, vFSB is +0.1V

But I think the key to get as such high fsb on wolfdale cpu is the GTLREF Ratio. I set it from 0.636 to 0.603.

Raising the MCH voltage will end in blue screen, same thing if I set the vFSB voltage to +0.2V

At the moment I am testing max stable fsb. Prime95 is running since 30min with 560x6 :eek:

Quote:

Originally Posted by SeLecT

Nice FSB and CPUs ;)

What is the maximum clock with the E8400?

Thank you ;) Never tried till yet to get the maximum clock. But tried this night to boot with 560x8 and 1.55V set in bios. No go ;) Will figure it out later.
12-09-2007, 05:31 AM
jimmsch

Quote:

Originally Posted by Zeus

I think you're missing the point, this topic was started to show what max fsb is possible on new 45nm cpu's.

Temps are somewhat irrelevant and depent to much on cooling solution and ambient temps, current cpu's can still be stable over 70C.

What does it tell you if he gets 30C idle? :shrug:

Obviously idle temps don't really say much, but if he would mention his room temps and post his core temps (he already mentions what he is using for a cooler) and it showed that at 4.3Ghz under load he was under 40C it tells me these 45nm chips run MUCH cooler than the 65nm and that means alot to me.

But I gues I am missing the point. This has nothing to do with MAX fsb. It is just something I like to know.
12-09-2007, 05:39 AM
olDirdey

Today I spent some hours to test the max stable fsb with E8400. And this time I used core temp to show the temps ;) Dont know the ambient temperature but it should be something between 19°-20°C

Max FSB running Prime95 is 560MHz

http://freenet-homepage.de/stullen_a...x6-prime-k.JPG

Can run Super Pi1M with 565MHz FSB. 32M stopps after 6 loops.

http://freenet-homepage.de/stullen_a...5x6-sp1m-k.JPG

And yes, these Chips will run very cold. Never seen more than 66°C on Coretemp, even if set 1.55V in Bios.
12-09-2007, 05:43 AM
jimmsch

Thank you for showing the temps. Seems cool! Nice clocks with what I assume is an undervolt at 1.2 vCore?
12-09-2007, 05:47 AM
olDirdey

1.2v is a bit over default voltage. If set default in bios it will show 1.168 idle and 1.152v under load.
12-09-2007, 07:56 AM
jimmsch

I am liking these things more and more. I just hope the 8500 will cooperate with my P5W DH Dlx.
12-09-2007, 12:01 PM
Kairiaku

very nice in all fairness
12-09-2007, 12:25 PM
saaya

nice, what memory divider are you using?
5:6 is giving me the max fsb so far with my 6750, 560fsb bootable but not stable :D max stable is 550.

stock heatsink! :lol:
12-09-2007, 12:25 PM
tam2

Nice little board.... am i the only one??? :D

-tam2-
12-09-2007, 12:35 PM
olDirdey

Quote:

Originally Posted by saaya

nice, what memory divider are you using?
5:6 is giving me the max fsb so far with my 6750, 560fsb bootable but not stable :D max stable is 550.

stock heatsink! :lol:

I am using 1:1 divider. You can see it in the validation link. 5:6 is maybe bit better for max fsb but my ballistix don´t run DDR1400 @ 2.2V and that is what I need for 580MHz fsb with 5:6 divider :D
01-01-2008, 03:42 PM
dinos22

600+ easy FSB on DICE/LN2 :)

nice CPU

damn i REALLY want some high FSB monsters like these
01-01-2008, 11:15 PM
KTE

Very nice going there, thanks. :toast:

Quote:

Originally Posted by Zeus

I think you're missing the point, this topic was started to show what max fsb is possible on new 45nm cpu's.

Temps are somewhat irrelevant and depent to much on cooling solution and ambient temps, current cpu's can still be stable over 70C.

Not the Yorkies anyway. 64.5C damages and throttles CPU.

Quote:

What does it tell you if he gets 30C idle? :shrug:

A potential user paying and buying it would like to know what cooling solution is required for high FSB/MHz benchable/stable under which conditions and the CPU operating temp. I mean user posting can always be cooling bottlenecked for FSB. A little bit of easy extra info always helps everyone rather than a few. ;)
01-02-2008, 12:27 AM
dduckquack

mATX record for fsb? :p
01-02-2008, 05:01 AM
olDirdey

Quote:

Originally Posted by dinos22

600+ easy FSB on DICE/LN2 :)

nice CPU

damn i REALLY want some high FSB monsters like these

Next week I will try e8400 and maybe e8500 with dice and hope to break the 600mhz barrier :D

Quote:

Originally Posted by KTE

Very nice going there, thanks. :toast:

Not the Yorkies anyway. 64.5C damages and throttles CPU.

A potential user paying and buying it would like to know what cooling solution is required for high FSB/MHz benchable/stable under which conditions and the CPU operating temp. I mean user posting can always be cooling bottlenecked for FSB. A little bit of easy extra info always helps everyone rather than a few. ;)

As you can see I don´t need much voltage to get these high fsb. Everything was tested with normal air cooling without opening the window or let the ac blow on it.

If anyone wants to know, I can repeat the test and add
coretemp to the picture.

Quote:

Originally Posted by dduckquack

mATX record for fsb? :p

I know from a french user who was able to get 543MHz FSB on G33M-DS2R, but 580MHz, I think I am the only one with aircooling :up:
01-02-2008, 09:18 AM
lowfat

It baffles me how a budget board is outdoing every manufacturers high-end P35/X38 boards. G33 the new hotness?
01-02-2008, 09:54 AM
lazy

Quote:

Originally Posted by lowfat

It baffles me how a budget board is outdoing every manufacturers high-end P35/X38 boards. G33 the new hotness?

i know... never knew the Giga G33 can OC this well
01-02-2008, 10:40 AM
giraffen

Looks very nice, insane budget mobo:eek:
01-02-2008, 09:58 PM
lukas69

i think if E8500 havent coldbug can take over 600 Fsb on LN2 and with 9,5 multipler is @>5700 sure superpi1m
01-03-2008, 12:41 AM
aoch88

Can I say the E8400/E8500 are the new OC kings for upcoming C2D 45nm family? :D Gosh, these oc are awesome!
01-03-2008, 01:47 AM
Zeus

Quote:

Originally Posted by aoch88

Can I say the E8400/E8500 are the new OC kings for upcoming C2D 45nm family? :D Gosh, these oc are awesome!

You can say that again, good samples will do 5GHz water/aircooled. :shocked:

But please let 'm hurry releasing those monsters!!
01-03-2008, 02:02 AM
dduckquack

Quote:

Originally Posted by Zeus

You can say that again, good samples will do 5GHz water/aircooled. :shocked:

But please let 'm hurry releasing those monsters!!

the wait is probably good... for my pocket! :p:
01-03-2008, 02:09 AM
Zeus

Quote:

Originally Posted by dduckquack

the wait is probably good... for my pocket! :p:

Yeah, but it's bad on my nerves. :D
01-03-2008, 02:28 AM
M@deira

OlDirdey

Results impressive, congratulations

I am considering future get a E8500 for me along with a DFI LP TR2 + P35 Ballistix PC2 1066mhz been set with too good to overclock

But I wonder: How do these versions "ES"? Know me?

M@deira
01-03-2008, 04:05 AM
XSS

Crazy who can i buy the E8500 ?
01-03-2008, 05:20 AM
olDirdey

Quote:

Originally Posted by lowfat

It baffles me how a budget board is outdoing every manufacturers high-end P35/X38 boards. G33 the new hotness?

What do you think what I thought :eek:

Tried the chips on severel P35 and X38 Boards but they all maxed out at ~565-570MHz, but not stable enaugh to get a validation.

Then I tried my htpc board and this one easiliy can do this. After some testing, mch/fsb voltages in bios on normal even on 45nm quadcore up to 460MHz FSB.
01-12-2008, 03:13 AM
pitx

Quote:

Originally Posted by olDirdey

http://freenet-homepage.de/stullen_a...U/cpu-3990.JPG

Very impressive on the DS2R... :clap:
Which bios revision you have onboard?

Cheers
01-20-2008, 02:43 AM
olDirdey

it´s bios version F7, first bios for 45nm support.
01-26-2008, 10:24 AM
olDirdey

Got a new CPU :D Still on air with boxed cooler...

http://valid.x86-secret.com/cache/303518.png

http://valid.x86-secret.com/show_oc.php?id=303518
01-26-2008, 01:45 PM
dinos22

what can you get with P35-DQ6 you guys have there
01-04-2010, 05:31 PM
Shinjeli

Asus Maximus 2 formula

Hello, im new here and the reason why i registered is THERE EXTREMELY AWESOME pieces of system in here :D
You guys have clocks higher then the USA's covernant :yepp: Well anyway... i Have asus maximus 2 formula and i have E8500 with those and aircooling i got to 4,21ghz running stable. PS:How can i give you a link to see my results? :shrug:
01-04-2010, 06:49 PM
Gendo

You could have made a thread in the Intel section instead of bumping a 2-year-old thread...
01-04-2010, 07:01 PM
Shinjeli

Quote:

Originally Posted by Gendo

You could have made a thread in the Intel section instead of bumping a 2-year-old thread...

Im sorry :( I just dont know where to comment yet :rolleyes: but thx still :clap:

All times are GMT -8. The time now is 08:12 PM.

XtremeSystems