New Coretemp 0.95.6 with QX9650

Printable View

11-29-2007, 02:07 AM
oscar3d

New Coretemp 0.95.6 with QX9650

I'm testing it with my QX 9650

So far I got three issues:

1) Why is the Tjunction on my chip being up now to 105C? Is that correct? I thought the TJunction was 100C.

2) There is a difference of an extra 5-6C now on the cores. It is actually matching what the Sensor monitor shws if I use Everest. So what is correct,either 0.95.4 or 0.95.6?

3) The VID is now shown, great, but it always stays the same no matter if I'mactually stressing the chip.

I can assume that by adding 5-6C extra it is adding 5C extra to my Tjunction (100+5=105C)

That's my feedback...

Any other tester running with the same issues on your Yorkies.?
11-29-2007, 04:03 AM
The Coolest

1) Because TJunction on the new chips has increased by 5C.
2) 0.95.6 is correct.
3) Well VID should only change when EIST is enabled and CPU is idle.
Your assumption regarding the temperature is correct.
11-29-2007, 05:35 AM
zerotol

your site is down coolest:shrug:

edit : nevermind i used the first one i found on google , not the one in your sig.
11-29-2007, 05:42 AM
Chri$ch

where can i download CoreTemp 0.95.6?

Will test it with my E8500, CoreTemp 0.95.4 dont show temps under 26/27°C :(
11-29-2007, 07:25 AM
bing

Quote:

Originally Posted by The Coolest

1) Because TJunction on the new chips has increased by 5C.

The Coolest, mind share where is the "official" source of this max.Tjunction temp value please ?
11-29-2007, 07:31 AM
xgman

Mine is at 105 also. I also have around an 8 degree difference "reported" between the first two and last two cores even though my temps are sub zero and the coretemp values never chane even under stress. (yes I have an even mount) I sure wish the MB makers would enable reading of negative temps after all these years.
11-29-2007, 09:42 AM
bobov

My core0&1 show 28C in coretemp 0.95.4, but core2&4 show 52C. Mobo is intel dx38bt, cpu qx9650 with U120-Ex. :(
11-29-2007, 09:43 AM
bobov

oscar3d, what's vid of your qx9650? Thanks.

PS:// How is your P5E3 Dlx? Do you like it? Does LLC work on this board? Thanks again.
11-29-2007, 11:10 AM
Crazypinoy9

Links to 95.6???

Quote:

Today 09:43 AM
bobov oscar3d, what's vid of your qx9650? Thanks.

PS:// How is your P5E3 Dlx? Do you like it? Does LLC work on this board? Thanks again.

LLC helps a little bit but hard modding the board is definitely better.
11-29-2007, 11:52 AM
oscar3d

Ok... I set up my VCORE on the BIOS to be 1.35V at 4Ghz.

The new coretemp shows it as 1.3375V, and it doesn't change even if I slash the CPU with Prime 95.

I'm sorry guys, but this version was given to me as a beta test from the author. I basically got a PM offering me and other xtreme members to test it.

It is a private version, and as such many of us are not able to share it with anyone until he declares it official. As it stands I will respect his decision on this. :shrug:
11-29-2007, 11:55 AM
oscar3d

BTW thanks for claryfing my questions :yepp:

So I guess we have 5 more degress to play with the Tjuntion treshold.

Only thing is that now instead of having 63C while I'm stressing cores @4ghz I'm reaching 68-69C. :rolleyes:

Well, at least this is the real reality proof I guess. Burn baby, burn!!!
11-29-2007, 12:26 PM
xgman

Quote:

Originally Posted by oscar3d

The new coretemp shows it as 1.3375V, and it doesn't change even if I slash the CPU with Prime 95.

I don't think it reads it in real time.
11-29-2007, 12:47 PM
graysky

That's not your vcore, it's your VID. They are different... btw, where can one d/l 0.95.6 of coretemp?
11-29-2007, 01:16 PM
AriciU

You can't.
11-29-2007, 02:41 PM
Yamcha

can someone upload the latest Coretemp on Megaupload.com or something, the site is down and i cant find it anywhere else.
11-29-2007, 04:39 PM
azzido

Quote:

Originally Posted by Yamcha

can someone upload the latest Coretemp on Megaupload.com or something, the site is down and i cant find it anywhere else.

http://www.alcpu.com/CoreTemp/
11-29-2007, 04:47 PM
Nate P.

Quote:

Originally Posted by azzido

http://www.alcpu.com/CoreTemp/

Where's the 95.6 version? All I see is the 95.4...
11-29-2007, 04:57 PM
The Coolest

Quote:

Originally Posted by zerotol

your site is down coolest:shrug:

edit : nevermind i used the first one i found on google , not the one in your sig.

Yes, I had to switch hosts, not taking into account that way too much places, especially Google are still using the old and now dead thecoolest.zerobrains URL...
The one you should use is www.alcpu.com/CoreTemp

Quote:

Originally Posted by Chri$ch

where can i download CoreTemp 0.95.6?

Will test it with my E8500, CoreTemp 0.95.4 dont show temps under 26/27°C :(

Regarding subzero temps, the Intel DTS, for whatever reason, never worked with very cold temperatures. It cold-bugs at some point and always shows the same temp after a certain point.

Quote:

Originally Posted by bing

The Coolest, mind share where is the "official" source of this max.Tjunction temp value please ?

I got it from someone who had a look at some Intel BIOS guide docs.

Quote:

Originally Posted by Crazypinoy9

Links to 95.6???
LLC helps a little bit but hard modding the board is definitely better.

Quote:

Originally Posted by Yamcha

can someone upload the latest Coretemp on Megaupload.com or something, the site is down and i cant find it anywhere else.

Quote:

Originally Posted by graysky

That's not your vcore, it's your VID. They are different... btw, where can one d/l 0.95.6 of coretemp?

Quote:

Originally Posted by Nate P.

Where's the 95.6 version? All I see is the 95.4...

I'm sorry guys, this an internal build and is work in progress. There's not much change from 0.95.4, except some minor bug fixes and added support for these new chips.

Quote:

Originally Posted by azzido

http://www.alcpu.com/CoreTemp/

QFT :)
11-29-2007, 10:46 PM
graysky

Quote:

Originally Posted by The Coolest

Yes, I had to switch hosts, not taking into account that way too much places, especially Google are still using the old and now dead thecoolest.zerobrains URL...
The one you should use is www.alcpu.com/CoreTemp

Wow, if I didn't find this thread, I would have no idea this is the live url. I dunno how you can fix it in google, but I'm guessing you'll have significantly less traffic until you do :) Is there any way you can have the old url redirect to the new one o a temporary basis?
11-30-2007, 10:53 PM
oscar3d

Coolest, you're tha man!!

Thanks so much for posting your URL. Zerobrains wasn't working....
12-02-2007, 07:19 AM
The Coolest

I asked the person who used to host my site to somehow redirect users to the new domain:
www.thecoolest.zerobrains.com/
www.thecoolest.zerobrains.com/CoreTemp
So until the server goes down completely we will have redirection for users who don't know about the change. In addition in the next release the links in the About box will be updated.

Also, working on this new addition, at last :) This is just the layout I made. What do you think about it? I'd appriciate some input before I actually start coding this.
http://www.alcpu.com/forums/viewtopic.php?p=1383#1383
12-02-2007, 07:24 AM
cantankerous

I think it looks great, I really like the option to display the highest temperature each core has seen in the system tray. This is great to see on the fly just how how each core has been, even if only for a few seconds, without having to manually sit there and man the temperature gauge for changes, nor go through the log file after your testing has been done. Keep up the great work, I look very forward to your next release. Your 0.95.4 has been a God send to us all.
12-02-2007, 07:28 AM
OS-Wiz

Quote:

Originally Posted by The Coolest

I asked the person who used to host my site to somehow redirect users to the new domain:
www.thecoolest.zerobrains.com/
www.thecoolest.zerobrains.com/CoreTemp
So until the server goes down completely we will have redirection for users who don't know about the change. In addition in the next release the links in the About box will be updated.

Also, working on this new addition, at last :) This is just the layout I made. What do you think about it? I'd appriciate some input before I actually start coding this.
http://www.alcpu.com/forums/viewtopic.php?p=1383#1383

Looks good to me.

CoreTemp doesn't appear to work in Vista64, that right?
12-02-2007, 07:37 AM
Darkstormz

Quote:

Originally Posted by OS-Wiz

Looks good to me.

CoreTemp doesn't appear to work in Vista64, that right?

It does with a fix

http://www.overclock.net/operating-s...emp-tweak.html
12-02-2007, 10:15 AM
OS-Wiz

Quote:

Originally Posted by Darkstormz

It does with a fix

http://www.overclock.net/operating-s...emp-tweak.html

Thanks, works fine.
12-02-2007, 11:38 AM
lukas69

very good