My second run with E6850 @ dryice 5175mhz

Printable View

11-23-2007, 05:19 AM
BeardyMan

2 Attachment(s)

My second run with E6850 @ dryice 5175mhz

Setup :

ASUS P5K-E vcore mod
E6850 L723B576 @ 1.7V
Crucial ballistix PC6400
X1800XT coldbug, died lol :ROTF:

Picture of the setup:
SPI 1M @ 5104mhz, untweaked
Validation at 5175Mhz
My plans were 3D ofcourse but the card had a nasty coldbug, so i popped of the gpu container and remounted the air cooling, that worked fined for a few minutes but it was clear that the card was dieing lol.
I did the quick SPI 1M run first and due some condensation reason i was unable to rerun it at those speeds anyhow 9.9secs is always nice :D
AMD fanboy? who? :D
11-23-2007, 05:39 AM
Bigchrome

Sick results! Can't wait to get my E6850!!
11-23-2007, 05:42 AM
toddm27

nice runs, sorry to hear about the dying card
11-23-2007, 05:42 AM
GiaXi

very good job...nice result!
11-23-2007, 06:21 AM
pablopawel

I have one question:
Where you measure a V?? Windows or measure point ??
11-23-2007, 06:37 AM
Solarfall

great scores there BeardyMan ... man i knew that cpu container would be a real killer with dry ice :D
11-23-2007, 07:06 AM
BeardyMan

LOL it seems that my card has survived it afterall :D

within few weeks i have soem few days of, then i will spend time to get the max out of this cpu , will try to get an hold of LN2 and i will mod the board and i will make sure i have a bench disk dedicated for spi 1M ready :D

thx for the replies
11-23-2007, 07:23 AM
massman

I have a dewar ... you have ln²? :D

J/k, great results, pot seems to be a blast.
11-23-2007, 07:32 AM
BeardyMan

Quote:

Originally Posted by massman

I have a dewar ... you have ln²? :D

J/k, great results, pot seems to be a blast.

haha my son, i have a dewar as well :D
i only can't get a hold of LN2 :(

--->:( <----
11-23-2007, 08:16 AM
blind_ripper

Quote:

Originally Posted by BeardyMan

haha my son, i have a dewar as well :D
i only can't get a hold of LN2 :(

--->:( <----

im still the only one that can get LN² :p , steven go to air liquid in antwerp they well tell u where u can get it close by ;)
11-23-2007, 08:38 AM
mXpS

I'm getting a new pot from Duniek and ill have to give my e6850 a hurting when it comes in :cool:
11-23-2007, 09:06 AM
KTE

Very nice :D

Pots and their specs? Load/idle temps and vcore? Tried single core max yet? Whats max FSB on chip and board?
11-23-2007, 09:37 AM
BeardyMan

Quote:

Originally Posted by KTE

Very nice :D

Pots and their specs? Load/idle temps and vcore? Tried single core max yet? Whats max FSB on chip and board?

Idle at 5.1ghz is 70.3°c, load is 68.5°c :D

Max fsb is unknown for me now :)
no single core yet.
Later more for sure
11-23-2007, 09:49 AM
MTP04

Nice work. Looks like you have a strong E6850. I wonder how high it can go with ln2.

My E6850 has a low fsb wall at around 510 fsb on air.:(
11-23-2007, 09:50 AM
BeardyMan

Quote:

Originally Posted by MTP04

Nice work. Looks like you have a strong E6850. I wonder how high it can go with ln2.

My E6850 has a low fsb wall at around 510 fsb on air.:(

what board are you using?

I have a strong feeling my ASUS P5K-E is a part of this succesfull clocking...
the vanilla board felt less stable i can asure you that lol.
11-23-2007, 09:55 AM
KTE

Thanks.

Steven some details of those pots now please. :D

Why are the L723B turning out awesome while the L726B turning out to be duds :confused: I tried a running L726B E6850 on P35 DS3 before picking the E6750 to test and it was walled at 468. Bad luck as I got back home and tested the newer E6750 to be walled at 478 on a P35 DS4, stable at only 472. :( I'm thrown off trying for another now honestly.
11-23-2007, 10:10 AM
BeardyMan

Quote:

Originally Posted by KTE

Thanks.

Steven some details of those pots now please. :D

Why are the L723B turning out awesome while the L726B turning out to be duds :confused: I tried a running L726B E6850 on P35 DS3 before picking the E6750 to test and it was walled at 468. Bad luck as I got back home and tested the newer E6750 to be walled at 478 on a P35 DS4, stable at only 472. :( I'm thrown off trying for another now honestly.

http://www.xtremesystems.org/forums/...d.php?t=166584

this should anwser enough about the pots i guess :)

Well about those cpu's it's just a draw of luck :)

btw, give the asus P5K a shot it's worth it...
11-23-2007, 10:22 AM
KTE

Thanks Steven. :)

Did you make the pots yourself or get them made? If I have enough time in the upcoming months I might make some.

Will give Abit boards a go and then maybe one of the ASUS. Since I don't buy anything myself, I have to wait before travelling hundreds of miles to pick it up and I don't have the hours free for that at all. I'll probably pick up an E6850 again instead.
11-23-2007, 10:24 AM
MTP04

Quote:

Originally Posted by BeardyMan

what board are you using?

I have a strong feeling my ASUS P5K-E is a part of this succesfull clocking...
the vanilla board felt less stable i can asure you that lol.

I got the same board as you, P5K-E wifi. But we all know every board, even the same model boards clock differently. I just might not have a good one.
11-23-2007, 10:52 AM
BeardyMan

Quote:

Originally Posted by KTE

Thanks Steven. :)

Did you make the pots yourself or get them made? If I have enough time in the upcoming months I might make some.

Will give Abit boards a go and then maybe one of the ASUS. Since I don't buy anything myself, I have to wait before travelling hundreds of miles to pick it up and I don't have the hours free for that at all. I'll probably pick up an E6850 again instead.

They are made by someone else as i wish to :)
11-27-2007, 09:46 AM
nFo

Nice, great clocks. :up:

What's your nickname on: www.tweakers.net ? ;)
11-27-2007, 09:48 AM
BeardyMan

Quote:

Originally Posted by nFo

Nice, great clocks. :up:

What's your nickname on: www.tweakers.net ? ;)

i'm not on tweakers.net.
11-29-2007, 10:07 AM
BeardyMan

I tried LN2 today, result aren't bad strange thing was that i could bench spi and 3D at same speeds (5333mhz):D

what's the bottleneck my friends?:shrug:

Link
11-29-2007, 10:10 AM
tiborrr

Hard FSB wall.
11-29-2007, 10:24 AM
nFo

Quote:

Originally Posted by BeardyMan

i'm not on tweakers.net.

Nieuwe Map, sounds dutch to me. ;)
11-29-2007, 10:27 AM
BeardyMan

Quote:

Originally Posted by nFo

Nieuwe Map, sounds dutch to me. ;)

Well i'm Belgian actually :D
12-09-2007, 11:49 AM
Kairiaku

Nice speeds,
gutting about the card :rolleyes:

All times are GMT -8. The time now is 12:38 PM.

XtremeSystems