Adata DDR3-1884 CL6.6.6.13 1t

Printable View

11-21-2007, 11:21 PM
GTX

Adata DDR3-1884 CL6.6.6.13 1t

ADATA EXTREME DDR3-1900X
OC@942MHZ (AFFECTIVE DDR3-1884)

DDR3 1884MHZ 6.6.6.13 1T SUPER PI 32M
http://pic.xfastest.com/hicookie/DDR...00x/1884c6.gif

Latency
http://pic.xfastest.com/hicookie/DDR...x/1844c6lt.gif
11-21-2007, 11:41 PM
x3ro

Nice rams mate.. im getting them too, send next week ^^ .. cant wait ^^

Regards
11-22-2007, 12:00 AM
Den Leiw

DDR3 1884MHZ 6.6.6.13 1T that's awesome !!!
how much volt does it require to run at that speed?
11-22-2007, 12:12 AM
GAR

nice.......DDR3 should be better in late 08....better prices and ddr3 2000 should be nice.
11-22-2007, 12:57 AM
krampak

Impressive ! :clap: No 6-6-5 ?
11-22-2007, 05:54 PM
GTX

Compare Conroe to Yorkfield with DDR3-1884 CL6.6.6.13 1T
8x471,3768MHZ,conroe scores 12m21s, Yorkfield QX9650 scores 11m32s
Yorkfield is the way to GO,hold the memory at the same Frequency,pull muliti then see ...

QX9650@9x471,4239Mhz ,10m27s
http://pic.xfastest.com/hicookie/DDR...9650_9x471.gif

QX9650@10x471,4239Mhz ,9m36s
http://pic.xfastest.com/hicookie/DDR...00x/10x471.gif
11-22-2007, 09:11 PM
Hazzan

Nice speed !!! how you use Vdim ?
11-22-2007, 09:15 PM
dinos22

my goodness hicookie that's fast and crazy good ram

what ICs do they use
11-22-2007, 09:32 PM
antari

Insane! What vDIMM was that?
11-22-2007, 09:49 PM
Computerville

Very fast, I wish I would have DDR3 2000...
11-22-2007, 10:38 PM
DStealth

Quote:

Originally Posted by dinos22

my goodness hicookie that's fast and crazy good ram

what ICs do they use

2nd that :rolleyes:

Wow 39ns with ddr3 , m8 you are steping into ddr cl2 AMD territory :D
11-22-2007, 10:48 PM
3oh6

Quote:

Originally Posted by dinos22

my goodness hicookie that's fast and crazy good ram

what he said X10. that is just sick...and no 1M BS, you don't mess around showing off some 32M goodness. thank you for re-affirming my belief in god, now i just have to get my hands on some sticks that do the same :up:
11-23-2007, 12:12 AM
x3ro

Quote:

Originally Posted by Computerville

Very fast, I wish I would have DDR3 2000...

You just wait then... A-Data is working on A-Data Vitesta DDR3 2000X... these run on 2.05/2.15V on the following timings: 9-9-9-24 and the kit will contain 2x1gb ddr3 sticks.. there will also be A-Data Vitesta DDR3 1900X
Regards
11-23-2007, 12:43 AM
M.Beier

Now where's the cookie? :)

But impressive, thats for certain... Are we talking D9GTR / GTS? What chip... 6 Layer PCB, 8 layer, 4 layer.... I need specs... Could be a lucky incedence, could be a killer serie...
11-23-2007, 12:53 AM
dinos22

they are GTRs

fairly high vdimm but if the chips take it wellllll it's important they can :D

fastest CAS6 i have ever seen that's for sure :)
11-23-2007, 12:53 AM
saaya

this must be crazy vdimm, very nice result! :toast:
i think its even a bit faster than what victor reached.
11-23-2007, 01:01 AM
AMD-PHENOM

great results, well done.
11-23-2007, 02:51 AM
stone_cold_Jimi

Quote:

Originally Posted by dinos22

they are GTRs

fairly high vdimm but if the chips take it wellllll it's important they can :D

fastest CAS6 i have ever seen that's for sure :)

"fairly high vdimm"? But how high? More than 2.3v or what? Inquiring minds need to know... this is CAS 6 after all. :)
11-23-2007, 03:44 AM
dinos22

he says 2.3-2.36v

i think that is still excellent considering the overclock in question and no less than a P35 board

he's got some ripper sticks and any serious bencher would be very envious i'm sure :yepp:
11-23-2007, 05:09 AM
BenchZowner

Quote:

Originally Posted by x3ro

You just wait then... A-Data is working on A-Data Vitesta DDR3 2000X... these run on 2.05/2.15V on the following timings: 9-9-9-24 and the kit will contain 2x2gb ddr3 sticks.. there will also be A-Data Vitesta DDR3 1900X, they will run on the same timings but will be only 2x1gb.

Regards

DDR3-2000 2x2GB kit is probably a typo of the press release m8.
It'll be 2x1GB ( a 2GB kit, not a 4GB kit )
11-23-2007, 08:00 AM
saaya

Quote:

Originally Posted by dinos22

he says 2.3-2.36v

i think that is still excellent considering the overclock in question and no less than a P35 board

he's got some ripper sticks and any serious bencher would be very envious i'm sure :yepp:

well its stable for superpi 32m... but for how many hours will this kit survive with volts that kill ddr2? :D

But awesome for benching, the best ive seen so far was 1850 with 665 more or less but that was with "only" 2.25v. looks like i need to set up my maximizer and check out higher vdimm. but i have to say i already feel bad for even thinking about giving theese sticks 2.35v... i can already here the sticks shivering in fear the closet, they must have sensed something :lol:
11-23-2007, 09:44 AM
hiwa

:up: oh my God they are really nice very fast :clap:
11-23-2007, 10:06 AM
KTE

Very nice mate. :)

Their Vitesta DDR3-2000X are also very good although they ran at CAS 7 when overclocked but the rest of the timings were close by and perf better: http://oc.adata.com.tw/news_detail.asp?newsid=5

Those volts will kill the IC's very quick, as saaya mentioned they kill good DDR2 pretty quick never mind DDR3. If I needed it so bad I'd rather pay for their 2000X at 2.15V.
11-23-2007, 10:07 AM
Zannema

Impressive memory :clap:
11-23-2007, 10:23 AM
NapalmV5

when 6-6-6 @ 1000MHz? lol
11-23-2007, 10:26 AM
saaya

Quote:

Originally Posted by KTE

Those volts will kill the IC's very quick, as saaya mentioned they kill good DDR2 pretty quick never mind DDR3. If I needed it so bad I'd rather pay for their 2000X at 2.15V.

you mean the 2000x will last longer at high volts than the 1900x? how? :D
11-23-2007, 10:35 AM
KTE

I doubt they will but they have lower V than 2.36 for 2000 anyway. :D
11-24-2007, 05:27 AM
hiwa

where we can found them in europe ?
i looked all german shops :(
11-24-2007, 07:23 PM
Infa

Quote:

Originally Posted by KTE

I doubt they will but they have lower V than 2.36 for 2000 anyway. :D

Well 2.15 are quite high for CL9 anyway...
i beleive..

and Saaya knows what Cellshock power is :)

cl 7 at MAX 2.28 so that tells alot...

but ofcourse A-data brings some secure volts for the ram, not every board or system might handle lower volts right tough..
12-01-2007, 01:48 PM
saaya

hey infa, do you happen to be at dreamhack as well? :D

has anybody else tried this adata 1900x?
do they all clock that high with cas6?
12-01-2007, 10:41 PM
BenchZowner

Quote:

Originally Posted by saaya

hey infa, do you happen to be at dreamhack as well? :D

has anybody else tried this adata 1900x?
do they all clock that high with cas6?

My kit should be here this week m8.
Don't really think that all retail 1900X will do CAS6 that high, but you never know.
For what it's worth it'll be a normal review sample, not "picked" at all, so...we'll see.

Metro.cl should be getting his kit this week as well.