Yorkfield in the house fellas > warmup under SS phase > can ya say 5Ghz Quad!!!

OK so i finally was able to get a nice toy (on loan from Ms. Intel Australia :) thanks for that). These will be short and sweet bench sessions and fingers crossed it all goes well before final LN2 soon.

Note: this chip is as hot/cold as E6750 or E6850 CPUs i've tried :cool: :D >>> i mean WTF 1.76V benching 3DMARK06 at 4.84GHz and maintaining around -46C on evap loaded until it gets to CPU tests and clonks out around -44.3C heheh

http://img409.imageshack.us/img409/4...teppingts0.jpg


Test Configuration:
Gigabyte X38-DQ6 DDR2 Motherboard (F6a bios)
Intel Core2 Extreme Quad QX9650
2GB DDR2 Corsair Dominators PC10000
Single 8800GT PCIe 2.0 512MB Graphics Card (Stock cooler)
Corsair HX620 Power Supply
Blackbox 1HP Rotary SS
80GB Samsung SATA Hard Drive
Windows XP Pro 32bit

CPUz 5GHz
http://valid.x86-secret.com/show_oc.php?id=265522

http://img221.imageshack.us/img221/939/cpu5003vk8.png


Hexus PiFast 19.31 @4.8Ghz

http://img48.imageshack.us/img48/187...4818mhzmu5.png


Aquamark3 = 273,146 :eek: with 4846Mhz on CPU and 712/999 on 8800GT

http://img208.imageshack.us/img208/4...846mhz7ds0.png


3DMARK01 = 84,042 :woot: 4.8Ghz and 700/999 on 8800GT :cool:

http://img134.imageshack.us/img134/8...42600mhdn3.png

32M wPrime = 8.484s

http://img149.imageshack.us/img149/1...4818mhzwl0.png


32M SuperPi = 9m 53.500s @4818Mhz 602Mhz on RAM 4-4-4-8 2.42v

http://img232.imageshack.us/img232/8...0s4818mcn6.png


1M SuperPi = 9.438s @4890Mhz 611Mhz on RAM 4-4-4-8 2.42v

http://img80.imageshack.us/img80/535...pi9438szn6.png


this is just a little warmup for some of the things i will be doing with this little sucker in the next few weeks :cool:

i can also bench at higher clocks....i think i was doing 1Ms around 4970 or so from memory and 32M stopped half way around 4.9xGHz heh

some more runs below :)

Quote:

---

Originally Posted by dinos22

did some more last night check it out fellas :D

some at 4.8GHz :D:D:D:D

http://img251.imageshack.us/img251/1...04600mhzz7.png

http://img204.imageshack.us/img204/6...81600mheu1.png

http://img520.imageshack.us/img520/7...46600mhqx8.png

http://img101.imageshack.us/img101/8...86600mhdk6.png

---

Quote:

---

Originally Posted by dinos22

and then some past 4922-4973GHz :D


http://img152.imageshack.us/img152/8...953mhz7hm8.png

http://img257.imageshack.us/img257/7...6627606jv8.png

http://img526.imageshack.us/img526/7...6387610rv8.png

http://img524.imageshack.us/img524/4...6703610ye5.png

http://img208.imageshack.us/img208/8...9650497in6.png

---

Quote:

---

Originally Posted by dinos22

also figured out how to get those extra ~45-50MHZ FSB out of the CPU

Static tRead Value =9 ;) on Gigabyte boards :D

http://img526.imageshack.us/img526/1...6stablenc3.png

---

Quote:

---

Originally Posted by dinos22

yeah that's fair enough


DRY ICE RUNS....

i had an unproductive run due to motherboard OVP problem with selecting 1.9v in bios (mobo refuses to boot in 90% instances)
another issue is vcore drop & droop >> all up at 1.9v selected in bios i get ~1.79v load :( in windows so i spend a million hours troubleshooting and in the end the board just wouldn't boot at those volts any more so just gave up

i have a modded DDR3 board coming in so there won't be any more of such problems

at the end of the night i did a quick 1M and Aquamark3 runs

man i wanted to see sub 9 second Pi for some long :D

SuperPi: 8.969s
QX9650@ 5150MHz 1.79v load
DRY ICE (k|ngp|n Dragon Evo 2.4 pot)
-70C on the pot > -63C on CPU but it's a bit whacky i think probablt -57C whacky because it was showing -79C/-80C on stock clocks in bios

http://img520.imageshack.us/img520/7...674c09ahk3.png


Aquamark3: 280,988
QX9650@ 5150MHz 1.79v load
DRY ICE (k|ngp|n Dragon Evo 2.4 pot)
-70C on the pot

http://img215.imageshack.us/img215/1...675449ffb4.jpg

i did some nature and Lobby low runs as high as 5160 just haven't put together any scores LOL
with stable volts on CPU at 1.85v load this chip would easily bench 5.2Ghz on DICE

---

.....



aaaaaaaaaaaand some more :D

did some more Single Stage last night with Gigabyte 8800GTS 320MB GFX Card

I have to say this is the best card i've ever seen man....OCs like crazy on stock air.....i benchmarked as high as 729/1890:eek: /1000


picked up some World Records with it too and others were close but not close enough :D


Test Configuration:
Gigabyte X38T-DQ6 DDR3 Motherboard (F2 bios)
Intel Core2 Extreme Quad QX9650
2GB DDR3 Corsair Dominators 1800 CAS7 (Damn Corsair makes nice RAM :D)
Single 8800GTS PCIe 2.0 320MB Graphics Card (Stock cooler)
Corsair HX620 Power Supply
Blackbox 1HP Rotary SS
80GB Samsung SATA Hard Drive
Windows XP Pro 32bit

here is what SuperPi with lovely Corsair DDR3 dominators looks like at 5Ghz :D

http://img165.imageshack.us/img165/1...pc14400ed1.jpg

http://img80.imageshack.us/img80/111...pi9031sok0.png

http://img210.imageshack.us/img210/5...5b2e44bvi0.png

http://img152.imageshack.us/img152/6...5b3f398sl1.png

http://img259.imageshack.us/img259/4...5b47bf3wu2.png

http://img49.imageshack.us/img49/695...5b4ebc4si9.png

http://img516.imageshack.us/img516/5...5b55403ml2.png

That is some sweet benching Dino:) enjoy your new toy.:up:

Thank you 1Day :D
i will :)

Unbe:banana::banana::banana::banana:inlievable:up:

RLM

Y'all should be using Vista to do these kinda tests though.

Goodd very good.... i wait mine chip :d nice score... i wait for result with 8800 GT SLI :d

who seriously benches vista :s

i can understand PCMARK05 but rest is just suicide

Yeah.. who bench into vista.... i think a few guys :s

Dinos22...........I wish I had the "contacts" that you seem to have. I wish I could get an "ES" to test, hell even if I have to send it back, it would still make my YEAR!!!

Heh, heh, heh.....You :banana::banana::banana::banana::banana:...!......ONLY 1.744VCore...... :p: :D

Keep pushing it :)

LN2 is a must!!!

Quote:

---

Originally Posted by hipro5

Heh, heh, heh.....You :banana::banana::banana::banana::banana:...!......ONLY 1.744VCore...... :p: :D

---

damn it hahahaha :D

OVP on mobo kicks in at 1.85v on this board lol so needs to go to my mates at Gigabyte for their engineers do remove it like the others ;)

Quote:

---

Originally Posted by metro.cl

Keep pushing it :)

LN2 is a must!!!

---

thanks Filipe
of course of course :D

How stable is it at those levels? Can you prime for an hour at 5 ghz with the phase?

Quote:

---

Originally Posted by Speederlander

How stable is it at those levels? Can you prime for an hour at 5 ghz with the phase?

---

no
it was crapping out at 4.84Ghz 3DMARK06

why would you prime with exotic cooling dude that makes no sense at all :confused:

wow Im gonna call my educational intel contact right now!
thanks for the benches DINO,can you do a 3dmark06?

Not a bad start but you gotta pick up that bus more and probably kick over to DDR3.

1.76v is a lot for single stage. Hopefully it is a solid 1.76v.

Any bandwidth screenshots?

Quote:

---

Originally Posted by FUGGER

Not a bad start but you gotta pick up that bus more and probably kick over to DDR3.

1.76v is a lot for single stage. Hopefully it is a solid 1.76v.

Any bandwidth screenshots?

---

Hi charles

this CPU :banana::banana::banana::banana:s itself at anything over the 408MHz FSB :(

Gigabyte has a droop on their boards so 1.8 becomes 1.76v under load as far as i remember now

i don't really do bandwidth shots because i never use it and means nothing in my routines. I let my memory tweaking show through SuperPi primarily and then others memory dependent benchmarks that are revolving around HWBOT entries firstly and then other interests i have

the X38T-DQ6 hasn't shown up on my doorstep today as it was supposed to so no DDR3 this weekend

Nice scores ^^

What do u think about the F6a bios ? Have u tried some other bios ?

Quote:

---

Originally Posted by Turbodream

Nice scores ^^

What do u think about the F6a bios ? Have u tried some other bios ?

---

i just jumped from F3 to F6b which was the latest beta bios

F3 i benchmarked that nice E6750 past 600MHz FSB which i had to knock back to around 570 or something on this bios :( bit since F6b supports penryn i haven't got a lot of choice

nice work dinos ,looking forward to seeing it under ln2.

Give it some ln2 :D

next weekend i promise :D

got some more numbers tonight though :)

Great start Dino!!!:D

OT:
Next week I'll receive mine and I'll put immediately under my 1HP SS:D
Do you think it's possible to close the 1M over 5/5.1Ghz under phase?
Mine is capable of those temps with an E6850 @ 1,42V in idle:
http://www.pctunerup.com/up/results/...4_Immagine.jpg

Congratz again for the start!:clap:

nice warm up m8,
possible to run 3D 06 with 8800GT and yorky @ 5ghz....
like too see it if can thanks.....regards....

highest 3d benchers were around 4.94GHz with SS

that's about as much as i'll get out of it for now

Quote:

---

Originally Posted by dinos22

highest 3d benchers were around 4.94GHz with SS

that's about as much as i'll get out of it for now

---

:eek: :clap:
That's not bad I think!!!

Nice testing dinos

Awesome results :toast: You should get someone to loan you a few ultra's and run some benchs w, SLI and break a wr :)

did some more last night check it out fellas :D

some at 4.8GHz :D:D:D:D

http://img251.imageshack.us/img251/1...04600mhzz7.png

http://img204.imageshack.us/img204/6...81600mheu1.png

http://img520.imageshack.us/img520/7...46600mhqx8.png

http://img101.imageshack.us/img101/8...86600mhdk6.png

and then some past 4922-4973GHz :D


http://img152.imageshack.us/img152/8...953mhz7hm8.png

http://img257.imageshack.us/img257/7...6627606jv8.png

http://img526.imageshack.us/img526/7...6387610rv8.png

http://img524.imageshack.us/img524/4...6703610ye5.png

http://img208.imageshack.us/img208/8...9650497in6.png

:clap: :clap: :clap: another good chip from you there but i love your 6700 :p:

also figured out how to get those extra ~45-50MHZ FSB out of the CPU

Static tRead Value =9 ;) on Gigabyte boards :D

http://img526.imageshack.us/img526/1...6stablenc3.png

Quote:

---

Originally Posted by hiwa

:clap: :clap: :clap: another good chip from you there but i love your 6700 :p:

---

yeah my E6700 is :cool: :D

haven't seen it for a month LOL been over at youngpro's place getting a beating in 3D past 5.4GHz :)

This thread makes me sad . . .

me too :(
gotta give this thing back soon :(

Fantastic chip Dino!!!:eek:
Please, run a SPI over 5Ghz:D
Have you try it with 2 cores?
What's the best core of this chip?

OT:
Mine is already in Italy, hope in 2days to receive it.:p:

What is the highest OC that runs an hour of prime? People are averaging low 4GHz (like 4.2 or so) prime stable with phase on the current quads. If this is the same, then....

priming on phase makes no sense as you'd very rarely use it as your 24/7 setup
i certainly don't

futuremark/superpi is all i want it stable :up:

Your hwbot point has rising misteriously:D :up:
This chip it's simply fantastic.
Please, just a 5Ghz SPI 1M:hrhr:

Quote:

---

Originally Posted by dinos22

priming on phase makes no sense as you'd very rarely use it as your 24/7 setup
i certainly don't

futuremark/superpi is all i want it stable :up:

---

Only makes sense to give an idea of 24/7 stability for everyone else since so many use prime as their criteria for 24/7 stability and 24/7 overclocks are just as important as bench overclocks, more so actually for many people.

yeah that's fair enough


DRY ICE RUNS....

i had an unproductive run due to motherboard OVP problem with selecting 1.9v in bios (mobo refuses to boot in 90% instances)
another issue is vcore drop & droop >> all up at 1.9v selected in bios i get ~1.79v load :( in windows so i spend a million hours troubleshooting and in the end the board just wouldn't boot at those volts any more so just gave up

i have a modded DDR3 board coming in so there won't be any more of such problems

at the end of the night i did a quick 1M and Aquamark3 runs

man i wanted to see sub 9 second Pi for some long :D

SuperPi: 8.969s
QX9650@ 5150MHz 1.79v load
DRY ICE (k|ngp|n Dragon Evo 2.4 pot)
-70C on the pot > -63C on CPU but it's a bit whacky i think probablt -57C whacky because it was showing -79C/-80C on stock clocks in bios

http://img520.imageshack.us/img520/7...674c09ahk3.png


Aquamark3: 280,988
QX9650@ 5150MHz 1.79v load
DRY ICE (k|ngp|n Dragon Evo 2.4 pot)
-70C on the pot

http://img215.imageshack.us/img215/1...675449ffb4.jpg

i did some nature and Lobby low runs as high as 5160 just haven't put together any scores LOL
with stable volts on CPU at 1.85v load this chip would easily bench 5.2Ghz on DICE

All this is awsum, but at the same time it makes me very very sad...
...to realise that during next few months many of us will dwell these forums without the other kidney...

Quote:

---

Originally Posted by hitokiri69

All this is awsum, but at the same time it makes me very very sad...
...to realise that during next few months many of us will dwell these forums without the other kidney...

---

lol this is bad news

intel is sooooo good that they are starting to make people sad :rofl:

two sad benchers in my thread alone :shocked: :D

ss phase = single stage phase??

Quote:

---

Originally Posted by xtrempinoy

ss phase = single stage phase??

---

yes single stage phase :)

Totally outstanding chip and single stage there dinos22, I think just a tad over 5.6gig was the max I have seen with some LN2 so to run even a 1m SPi at 5gig is very good for a single stage, did you find that the chip had big problems with the FSB as I think this is the norm at the moment because the M/B's look like the problem?

it turned out that it was just Static tRead setting in bios limiting the FSB OC :up:

easy 450 FSB now :)


i ran the chip on water and could do around 4.4Ghz 3d but lots of volts and could not pass CPU tests in '06

my chip is not very good compared to some of the other ones here

if i had a better chip i would be benching past 5Ghz on single stage :shocked: :D

Quote:

---

Originally Posted by dinos22

it turned out that it was just Static tRead setting in bios limiting the FSB OC :up:

easy 450 FSB now :)


i ran the chip on water and could do around 4.4Ghz 3d but lots of volts and could not pass CPU tests in '06

my chip is not very good compared to some of the other ones here

if i had a better chip i would be benching past 5Ghz on single stage :shocked: :D

---

I see that Intel let you borrow the chip was it and ES chip or retail/OEM.

Still nice to see a Quad at 5gig on a single stage:D

it's ES
you can see in the screenshots :)

dinos22 one question: Now that you have played with the York, does your heart tells you to go back to QX6xxx CPU?...I mean, could you go back?.... :)

LOL the answer is a double edged sword heh

obviously i LOVE these CPUs but i can't make myself spend US$1K+ on one :(

Quote:

---

Originally Posted by dinos22

obviously i LOVE these CPUs but i can't make myself spend US$1K+ on one :(

---

you can make yourself do anything...you know you wannnna :D

Quote:

---

Originally Posted by dinos22

it's ES
you can see in the screenshots :)

---

yeah but maybe they will forget about it and you can keep it after all the dust settles.;)
hey i can steal it at the weekend from you then you can say you dont know where it went.:p: :D
hmm now what can I put in your beer.........................................:rofl :

And I was afraid to do 1.6v on my Vapo LS mod. ;)

Nice benching!!

Quote:

---

Originally Posted by pumbertot

yeah but maybe they will forget about it and you can keep it after all the dust settles.;)
hey i can steal it at the weekend from you then you can say you dont know where it went.:p: :D
hmm now what can I put in your beer.........................................:rofl :

---

hahahaha

actually they've arranged pickup on Monday morning EEK

this weekend better be big

last night i had some more benches done on DDR3 mobo and took out some 8800GTS 320MB records :)

climbed into top20 HWBOT too heheh

did some more Single Stage last night with Gigabyte 8800GTS 320MB GFX Card

I have to say this is the best card i've ever seen man....OCs like crazy on stock air.....i benchmarked as high as 729/1890:eek: /1000


picked up some World Records with it too and others were close but not close enough :D


Test Configuration:
Gigabyte X38T-DQ6 DDR3 Motherboard (F2 bios)
Intel Core2 Extreme Quad QX9650
2GB DDR3 Corsair Dominators 1800 CAS7 (Damn Corsair makes nice RAM :D)
Single 8800GTS PCIe 2.0 320MB Graphics Card (Stock cooler)
Corsair HX620 Power Supply
Blackbox 1HP Rotary SS
80GB Samsung SATA Hard Drive
Windows XP Pro 32bit

here is what SuperPi with lovely Corsair DDR3 dominators looks like at 5Ghz :D

http://img165.imageshack.us/img165/1...pc14400ed1.jpg

http://img80.imageshack.us/img80/111...pi9031sok0.png

http://img210.imageshack.us/img210/5...5b2e44bvi0.png

http://img152.imageshack.us/img152/6...5b3f398sl1.png

http://img259.imageshack.us/img259/4...5b47bf3wu2.png

http://img49.imageshack.us/img49/695...5b4ebc4si9.png

http://img516.imageshack.us/img516/5...5b55403ml2.png

whoah pretty impressive stuff. mind you that Yorkie plays a big hand in the record setting too.
jeez they picking up on monday? lets remove the IHS and pop a Q6600 in there instead to send back.:rofl:

roflcakes

Looks really good ;).

Looking forward to LN2.

Is that the sticks they send you after you where at Corsair trip with some of the guys?.

Keep pushing it.

oliver it won't be LN2
dewar issue :(

we will run it on a cascade which will be good for -100C load fingers crossed no cold bug though