boinc on linux - with (k)ubuntu

boinc on linux - with (k)ubuntu

*not complete yet - i am writing right now and am saving my progress *

I decided to write a little guide (but with maaaany pictures) how one could get boinc running in linux.
There isnt just one linux, there are a huge number of so called distributions which differ in the installation tool and the applications they use and install. For the guide i have chosen (k)ubuntu because the latest release "gutsy gibbon" works really good, and it is very easy to install and use.
Now whats up with that (k). It means that both kubuntu and ubuntu exist. Under the hood they are nearly the same, but they differ in the desktop environment they use. While kubuntu uses kde, ubuntu uses gnome. I personally use kde because you can make it look like the way you want, and you have lots of possibilities. Gnome tries to be more easy to use. Anyway, the best would be if you download both and test them, because they are so called live-cd's. you can use them as if they would be installed, they are only a little slower ;)
You can download kubuntu here and ubuntu there. You can choose between the 64-bit edition and the "standard pc version" so download the one fitting to your cpu ;)

After the download finished, burn the iso to a normal cd, and put it into the target pc. Note: I used a virtual pc to install, so my harddisk was empty. Installation gets easyer if the harddisk is empty, but there is no problem when you use a harddisk with data on it, as (k)ubuntu is able to resize partitions
Now set the pc to boot from cd and you will be presented with the boot menu of the cd. The guide gets now split into to parts, so that it gets more readable. The ubuntu part will be the first one as the iso downloaded faster ;)

Ubuntu

Installation

After the Post your screen should look like this:
http://brot.echorulez.de/xs/ubuntu_install1.png.jpg
Click on the pic for a bigger one ;)

As we want to install Ubuntu it should be clear which one to take ;) It will take a bit to start up, and you will then be presented with the Ubuntu desktop.

http://brot.echorulez.de/xs/ubuntu_install2.png.jpg

Start the installation with the nice Install button which has been put ther just for that purpose... You will then have to click next a few times, and select what you think is correct. Step 4 is the partitioning step.

http://brot.echorulez.de/xs/ubuntu_install3.png.jpg

If the harddisk was empty, it will look like here, and you can hit next. if you need to delete or resize partitions first, select one of the other options and read carefully what you are going to do. You dont wanna loose your :banana::banana::banana::banana:, do you ?
The next step is nothing special, just enter your username and pw to your favour. After you pressed the next button a few times more, you will see that it starts to install

http://brot.echorulez.de/xs/ubuntu_install5.png.jpg

You will be asked to reboot and to remove your cd. This is done that you wont install ubuntu again, but boot the fresh installed os.
After the booting has finished and you have logged in with the user and pass you entered during installation you are done.

http://brot.echorulez.de/xs/ubuntu_done.png.jpg

Thats how your ready to use linux will look like. So that the pc gets something to do while we play arround with all those new menus, we will install boinc.

Get boinc running

The first thing a windows user would do is to go to the boinc page and download the boinc setup. but we are on linux here and everything is organized in packages which are installed by a so called package manager. this is apt in our case. it is an console application, but as ubuntu tries to be very user friendly they have created a user interface called "synaptic package manager" which can be found here

http://brot.echorulez.de/xs/ubuntu_boinc.png.jpg

When you start it you will need to put in your password for the user, because you can really damage your system with synaptic ;)

http://brot.echorulez.de/xs/ubuntu_boinc1.png.jpg

You will be presented with the categories on the left. The packages are listed on top. Well, see for yourself...

http://brot.echorulez.de/xs/ubuntu_boinc2.png.jpg

We could scroll arround looking for boinc, but that woud be tooo much work, so we will search for boinc... either ctrl+f or edit -> search ;)

http://brot.echorulez.de/xs/ubuntu_boinc3.png.jpg

After we get the results we want to install both boinc-client and boinc-manager, as one is the plain boinc application and the other one is the user interface. To mark something for installation click on the checkbox in front of the package name and select "Mark for installation"

http://brot.echorulez.de/xs/ubuntu_boinc4.png.jpg

As boinc needs some other packages which are not installed by default synaptic says that they have to be installed to. just hit the mark button

http://brot.echorulez.de/xs/ubuntu_boinc5.png.jpg

So after we tell the package manager to apply the pending changes (Apply button in toolbar of Synaptic) it will show us what gets changed and how much space it will use etc etc. so hit apply again ;) It will then start to download and then install and setup the new packages, which looks like this

http://brot.echorulez.de/xs/ubuntu_boinc9.png.jpg

When everything is done we can close synaptic, as we have to configure boinc now. Our newly installed application is hiding there

http://brot.echorulez.de/xs/ubuntu_boinc10.png.jpg

After starting boinc nearly everyone should know what follows:

http://brot.echorulez.de/xs/ubuntu_boinc11.png.jpghttp://brot.echorulez.de/xs/ubuntu_boinc12.png.jpg

The new view is something for weeners, and because of that we will switch to the advanced view as soon as possible and be happy that everything went well...

http://brot.echorulez.de/xs/ubuntu_boinc13.png.jpg



The boinc client is installed as a service, and gets started everytime our pc starts, so we dont need to care anymore.


omg, i wanna have 3d!

The default driver for video is the opensource driver, which are without any 3d acceleration. If you want to play arround with compiz ( and after seeing that video i am sure you want) you will need to install the closed source driver. There is an assistant located here:

http://brot.echorulez.de/xs/ubuntu_restricted.png.jpg



Kubuntu

Installation

Ok, we are back at the point that you have the cd in your drive and set to boot from it. Its the kubuntu cd this time, so it wont look brown/orange but blue ;)

http://brot.echorulez.de/xs/kubuntu_install.png.jpg

An additional screenshot is needed because the startup screen looks very nice ;)

http://brot.echorulez.de/xs/kubuntu_install1.png.jpg

Ok, so we are now at the kde desktop. You may play arround now, but as we need to hurry so that the pc crunches we will start the installation.

http://brot.echorulez.de/xs/kubuntu_install2.png.jpg

Ok, now you will have to push next a few times and select your timezone and keyboard layout. The next important step is to set up the partitions. If you want to keep some data on your harddrives, take care so that you dont kill one of your important partitions.

http://brot.echorulez.de/xs/kubuntu_install3.png.jpg

Then its time to use that next button again, and it will start to install:

http://brot.echorulez.de/xs/kubuntu_install4.png.jpg

The installation tries to detect your hardware and needs to copy lots of files, but it should finish soon. The next step is to restart

http://brot.echorulez.de/xs/kubuntu_install5.png.jpg

As you were asked to remove the cd the pc should now be able to boot our fresh kubuntu from the harddisk. While it starts up it looks like that:

http://brot.echorulez.de/xs/kubuntu_install7.png.jpg

Now you only have to log in and you will be presented with the kubuntu desktop.

http://brot.echorulez.de/xs/kubuntu_done.png.jpg

Get boinc running

See the ubuntu text for an explanation with packages and so on. The package manager in kubuntu is named adept and is hidden in the k menu

http://brot.echorulez.de/xs/kubuntu_boinc.png.jpg

You will need to enter your password because you can easily destroy the whole system with it, and kubuntu wants that only you can do this

http://brot.echorulez.de/xs/kubuntu_boinc1.png.jpg

Dont be afraid of the not really intuitive interface, as it is just erm.. functional ;)

http://brot.echorulez.de/xs/kubuntu_boinc2.png.jpg

As we want to install boinc we type that into that searchbox. Now that we see the results we need to select that we want to install boinc-client and boinc-manager. Click on these and select request install.

http://brot.echorulez.de/xs/kubuntu_boinc3.png.jpg

After you press the apply button and accept the next dialogs boinc is installed and configured. So close adept and look for the boinc manager in the kmenu

http://brot.echorulez.de/xs/kubuntu_boinc4.png.jpg

You will be presented with the usual dialog to attach to a new project. After answering them and switching to the Advanced view we can see that boinc is running!

http://brot.echorulez.de/xs/kubuntu_boinc6.png.jpg

Thanks brot - I'm right behind you.

Very nice brot :clap: :clap:

One question - once you have installed the Synaptic Boinc version (5.10.8) - how do you go about updating it to the latest linux Boinc version (5.10.21)downloaded from the berkeley site?

I see they also have a beta version 5.10.28 (Ubuntu Release) listed there too - wonder if this is going to eventually be an update for Synaptic?

Edit:Ady I was posting the same question :up:

Also just FYI that every one see S_B's post that Linux and WCG are not getting along 100% right now.

Nice work Brot :clap: Good to have you back with us so I can pick you penguin brain

Thank brot for the very detailed and illustrated installation guide. I will be referring to it. :up: :up: :up:

Quote:

---

Originally Posted by [cTx] mysticmerlin

Also just FYI that every one see S_B's post that Linux and WCG are not getting along 100% right now.

---

Yes, I've seen this (thanks SB :up: ) - it only seems to be the HCC project on linux, and only in a small amount of cases by the looks of it, but an eye needs to be kept on it.

Here are a couple of how-to guides on installing BOINC on Linux:

http://www.boinc-wiki.info/index.php...tware_on_Linux
http://wiki.debian.org/BOINC

I know these guides may seem confusing. There are a couple of things you need to know. After you've downloaded the BOINC installer, you need to make it executable. The first link explains how that's done. The other thing to remember is that in order to get a newer BOINC version to work, you must have the proper libraries and build dependencies (see second link). This is where it gets more complicated. In some cases, the Debian archive does not have the libraries needed for the latest BOINC version, in which case you're out of luck. Ubuntu is a Debian-based operating system.

I'm sure brot will have other tips for you.

Quote:

---

Originally Posted by [cTx] mysticmerlin

Also just FYI that every one see S_B's post that Linux and WCG are not getting along 100% right now.

---

What post :shocked: As i only have linux it would be really intrested if there are some problems :eek:

A note howto use the packets provided by boinc will follow soon :)

http://www.xtremesystems.org/forums/...4&postcount=44

Quote:

---

Originally Posted by sierra_bound

The Kubuntu desktop interface is quite nice. A reminder to those of you trying 64-bit Linux. You may need to install the 32-bit libraries. WCG projects are 32-bit apps. Without those libraries installed, your work units will likely produce errors immediately.

As mentioned in a previous post, the command for getting the libraries is:

sudo apt-get install ia32-libs

---

It did work here without it, but just in case you run into problems ;)

In my case, I had to install the 32-bit libraries. BOINC would not work properly without them. I think a lot depends on the processor you're using. If you have an Athlon64, Opteron or EM64T Xeon, you probably don't need the libraries. Intel x86 chips generally need full support for 32-bit code.

i recently joined the WCG and the XTREMESYSTEMS team (hmmm about two days) have a Quad Q6600 oc to 3.9 and an old dual opteron 270 running BOINC under Kubuntu , been a linux user for a long time , glad to see other people using it

Quote:

---

Originally Posted by neonflx

i recently joined the WCG and the XTREMESYSTEMS team (hmmm about two days) have a Quad Q6600 oc to 3.9 and an old dual opteron 270 running BOINC under Kubuntu , been a linux user for a long time , glad to see other people using it

---

Thanks for joining :up: Well i just love debian for server installations but who knows i might get used to ubuntu for my desktop machine, who knows :shrug: :up:

Don't forget my guide to compiling BOINC on 64bit linux but it is more advanced :D
http://www.xtremesystems.org/forums/...12&postcount=1

Nice work brot!! :toast:

Anyone know why Bionic will only use one of my Opteron cores? I have searched other places and cant seem to find the answer other than the x64 version doesn't have the problem. I'm running Ubuntu.

Check your settings in Device Profiles on your WCG page. Under basic options, make sure processor time is set to 100%. Then go to Projects tab on the BOINC Manager and hit Update.

Theres also another way to run boinc using Terminal (konsole), which i am currently using, because the boinc on repositories could'nt run in my machine, dont know why.This method is very useful to run boinc in linux without the system interface, like in the servers of your work company :hehe:

Download the latest version of boinc for the linux here . After downloading it,save in a easy location to find, usually /home/morais(example), open a terminal window, then write cd /home/morais (example).Then you have to make that file executable, doing . chmod 700 boinc_x.x.xx_i686-pc-linux-gnu.sh (which x means the version of boinc downloaded and note that i am running a 32 bit system because it shows i686.If youre running a 64bit OS it will be amd64).After that, install the boinc writing ./boinc_5.8.15_i686-pc-linux-gnu.sh.You shoud see something similiar to this:

http://www.worldcommunitygrid.org/im...ll/install.jpg

Later, do the following command to go to the boinc directory: cd BOINC (its case sensitive).

The last step is to attach the project to the WCG.Its very simple and will automatically make boinc run.In this step, you will need to visit WCG page to get the ID needed to attach you to the account.Login in the www.worldcommunitygrid.org and go here
Scroll down the page and you will see something like that
http://img222.imageshack.us/img222/5...hot3xq7.th.png

run on terminal ./boinc -attach_project
www.worldcommunitygrid.org xxxxxxyyyyyyzzzz111223344 (where xyz1234 is your ID) and done! Youre already running boinc on linux! :up:

Thanks a lot for this guide, it's very well written.

I dont understand how BOINC is a package though, is it integrated or something? And what version do you get? And if I see it right, other Linux distro's are another story, only (k)ubuntu has this package?

It's confusing for a Linux noob.

BOINC 5.10.8 is included with Ubuntu 7.10. You just have to install the client and manager which is easy to do. Just use the Synaptic Package Manager.

Ubuntu and Kubuntu both come with a lot of software. You can install programs using Synaptic Manager (for Ubuntu) or Adept Manager (Kubuntu). You can also download additional packages from the Debian repositories.

While Windows automatically installs a lot of junk you don't really need, Linux installs just enough to get you started. You have the option of adding a lot more programs.

Brot, i need your help here :D

I just installed the restricted nvidia driver. now I'm stuck at 1024x768 highest resolution. How do I change this back to 1280x1024 ?

How do I install lmsensors ? Can I implement this in my Gkrellm system monitor?

thanks

the resolution issue is solved :)
now the lmsensors thingie

i never played around with gkrellm, but i will look at it. should be possible imo.

It is installed as a plugin for gkrellm here, you just have to set up lmsensors with synaptic, and then run "sensors-detect" as root in a terminal.
then add the sensors plugin into gkrellm. you can access the gkrellm menü by clicking on the upper edge of gkrellm.

Thanks , i got it working now :)
I got coretemp , gpu temp , fan speed and vcore monitoring :cool:

I use Sensors-Applet to read Temperatures(Gnome panel), fan speed, voltages etc...The only thing missing is the GPU Temperature,no problem I can see it under the nvidia-settings.Here is a SS:http://img479.imageshack.us/img479/9...adatelaqt8.png
(Left to right:CPU Core Temperature; M/B Temperature; HDD Temperature)

@Jaco : You forgot to erase your user in the Terminal :p:

Morais

It looks like you need to wait until the gnome sensors applet supports the nvidia driver. the only tool i know that supports these is "kima" which is an kde app. But you could drop the Sensors-Applet developers a mail, or do a feature request ;)

gKrellm does;)

Sorry for reviving this thread, but theres a important update for people using Ubuntu, Kubuntu 7.10 (If not all other debian-based)and downloaded boinc-client and boinc-manager from repositories(Synaptic, Adept).Some people cant receive updates from WCG server, so no works to do.this is the common error message:
Scheduler request failed: problem with the SSL CA cert (path? access rights?)
This is a known problem with some ported BOINC releases, especially certain Linux x64 ports. The reason for the error is that a file (ca-bundle.crt) was omitted from the release.If you see this error message in your message log, then you probably need to apply this fix.

Determine your BOINC data directory. Check the beginning of your message log. There will be a line near the beginning like this:

08/06/2007 13:18:00||Data directory: /var/lib/boinc-client
Download the missing file. - make sure you name the file ca-bundle.crt.
Place the file in your BOINC data directory.
Restart BOINC.
Done. :)

I'm trying to install BOINC from the .sh files onto my Ubuntu install, since I wanted to update from what's in the deb repositories to the "latest" linux release. So I downloaded the latest .sh file from the Berkly download page, and do the usual

Code:

---

sh boinc_ubuntu_5.10.28_i686-pc-linux-gnu.sh

---

to extract the files, cd into the BOINC directory, and then run

Code:

---

./boinc

---

.
It starts running, and gets part way through it's test, and then fails with:

Code:

---

24-Feb-2008 22:09:01 [---] [error] GUI RPC bind failed: 98
gstate.init() failed: -180

---

Any idea what this error is, and how to fix it? The box is:
P4 1.7 Ghz
512mb RAM
An old Gigabyte Socket 478 board
Riva TNT2 64mb (old skewl :p:)
It's currently running headless/keyboardless, being accessed by Remote Desktop and UltraVNC viewer.

Edit: And crap, just tried re-installing the deb repositories version through:

Code:

---

sudo apt-get install boinc-client boinc-manager

---

And when starting Boinc, I'm getting the same error message.

Could it be that running the computer without a monitor is causing issues?

Edit 2: Never mind, I just restarted the box (auto log-in FTW), and I've got Boinc 5.10.28 working from the .sh files.

Eller

Quote:

---

Originally Posted by sokarul

Anyone know why Bionic will only use one of my Opteron cores?

---

do you have a kernel with SMP?

by the way: i'm using debian sid (sidux to be honest), installed boinc via apt, added my ID and since then let it crunch its daemonic way through the virus sludge without bothering me or my free RAM...well, not that kind of a problem with debian, but it's always nice to know :up:

Does anybody know how to integrate BOINC with a Live image? I managed to kill one of my hard drives over the week, and so I need to just use a Live image on a USB stick, but that means I need to reinstall it every time it gets shut down.