Printable View
Yes, Car high should be about 414fps and I didn't have the "good run" of the Car Low, coz I didn't have any LN2 left to re-test it.... It should be over 106k... :(
SINGLE XFX 8800Ultra run....
http://www.hipro-tech.com/images/hip...008_1242_1.png
http://www.hipro-tech.com/images/hip...008_1242_2.png
http://www.hipro-tech.com/images/hip...008_1242_3.png
COMPARE 2k1 URL....
.
woah still very nice.. 2500+ mhz shader clock :eek:
Awesome job hipro5. The power and overclockability of the Yorkfield is just sick.
OMG!!!:eek:
1012mhz gpu:eek:
That's an amazing score!!!:shocked: :clap:
Sorry for CH and CL but in any case it's an incredible score!
Single card and 105k 3d01 score:shocked:
Congrats hipro really amazing:up:
great run mate, 01 definatly feels the power of yorksfield!
george george... you always run out of ln2
wait to see what i'll have in a couple of weeks
(extremely busy with my job these days)
oh, nice score btw ;)
Very nice Hipro :up:
*drool* I hope for 100k with SLI one day :eek:
Thank you very much guys....... :)
@ gomeler: 100k with single vga will be easier than SLI/CF in a couple of months......Trust me.....;) :yepp:
Lost frames in CH usually apears wehn you havent got enough volts in cpu.
105k is excellent but i know u cand do even better :)
Those GPU clocks are moderate.
http://crazypc.ro/forum/attachment.p...9&d=1188287488
Quote:
Originally Posted by sang
;)
I didn't want to push my VGA coz I didn't have much LN2 left...... ;) This VGA can do 1053MHz but my second one (which cold bugs at -92*C - worse ) does semi-easy 1080MHz....BUT rams 1188MHz :(
Amazing Hipro, the hunt for 2K Dragon low has started :)
Good old 3dm01 really flies with that Yorkfield :) Got any nature scores with SLI + Yorkfield?
Nice score btw :D
poor hipro... :p: "only" 105k+ 3dmarks, ouch :D
No bios available for the Striker yet......:(Quote:
Originally Posted by elmor
Not too shabby for single card mate!!
Don't worry about CL and CH, this gives you something to improve on.
I'm holding my breath for 2x 8800U SLI, is it safe to say 1.6K nature will go down? :D
Nice single 01 Hip. Only you would complain about not getting good cars at that level lol. These yf chips are so silly fast in 01. The SLI results should be off the charts...110k+?? :D
Thanks guys and my friend Vince..... :)
I'm SO HAPPY at the moment..... I JUST got a "gift" ......SEE my SIGN...... :D :yepp:
You lucky 8@$t3rd!!!!Quote:
Originally Posted by hipro5
Gonna put the same thing in my sig now! :rofl:
Come on man, what've you got? QX9650 or even better?
This gift appear's on your cpuz ?
Congrats George, you a tthe brink of FSB/RAM? Youshould do 5.7+ easy when you could do 06 @ 5.65
Looking at your avatar I'm guessing you're going to give the 110k a shot? :cool:Quote:
Originally Posted by k|ngp|n
:D So they are letting you keep it ??Quote:
Originally Posted by hipro5
Answer to this question.... V V V .....:DQuote:
Originally Posted by Zeus
Quote:
Originally Posted by Athens[2004]
I didn't "push" it Peter.....I had a few LN2 for this coz I was testing some other things.....It does 2k1 at 5750MHz.... ;)Quote:
Originally Posted by LardArse
Later on.......Now I'm TOO busy about my PSUs....We have to "organize" the whole thing... :)Quote:
Originally Posted by massman
Well.......YES....... :DQuote:
Originally Posted by k|ngp|n
Congrats man, very nice present! :toast:
Hey Intel, if you got some left.... :D
Nice. You definitely deserve it man :D
hmmm....after your sucess, now I wonder if putting a little remark like yours in my sig will help me out now with INTEL? lol
OT: Nice avatar Vince:eek: :D
Sorry for OT.
Cant you use this ?Quote:
Originally Posted by hipro5
http://my.ocworkbench.com/bbs/showthread.php?t=68502
These new chips clobber the conroe in lobbies/cars. 5400mhz conroe on 975x/forceware drviers was something like 520fps LH. 2001 eats up cache. Very impressive boost in sys tests all around. First time I saw the fps counter rolling when we ran 2001 with york, it was pretty cool :D. Just like first time with conroe, dothan, etc.
oh yah almost forgot, got hipros 01 gt order now unless he was bluffing them when I was there, which I suspected :D.
Very impressive George.
Keep pushing it.
tremendous score :clap: next stop: +110k :up:
Ya really think he'd make it that easy? :DQuote:
Originally Posted by k|ngp|n
Wow really? Neat find Vince, I didn't expect 2k1 to be so dependent on L2 cache.Quote:
Originally Posted by k|ngp|n
@ Hirpo, crazy job man. That's one hell of an Ultra you've got there.
So, who's gonna get to 110k first, Hipro or Kingpin? :shrug: :rofl:
nice work
i envy you guys that you bench the GFX cards so much and most of them don't die :D
that's a challenge and expensive part of this game
good to see Intel finally come around to their No.1 Fanboi :D
nice looking tripple pot setup there Vince ;)
get ya bios yet :D
i need it too hehehe
Thanks guys.....
@dinos22: why should we kill out 8800s M8?.....IF they are "fully deeped" into plastic spray, they don't die that easy.... :)
@ Vince: "got hipros 01 gt order now unless he was bluffing them when I was there, which I suspected" ......
In English please coz I didn't understand it.... :D - with simple words for us who don't know good English - .... :D
@ NickS: No....those Ultras I have are from the VERY first samples, so nowadays ones do much better at least on their cores.... ;)
Do you cover the whole card in enamel? I've only done the backside as didnt want to cover the RAM IC's, would they be OK coated in enamel as far as heat dissipation goes?Quote:
Originally Posted by hipro5
Regarding KP's comment, he means he recorded your gametest order in '01, but he thinks you might have done a fake order to fool him
I cover the WHOLE VGA PCB with plastic spray and then "clean" with pure acceton the surfaces (ram chips/etc) which I want to place a heatsink on....:)Quote:
Originally Posted by T_M
Ahhh!......that bstrd Vince!........He was spying!...... :D :p:
No.....that's my order of runing it..... :)
Thanks for the coating experience/tip mate
very nice one hipro :clap:
Thanks SoF......:)
Nice run hipro :clap:
So tell us about this cold bug...have you seen it?
Bout time, the lengths a guy has to go to these days :DQuote:
Originally Posted by hipro5
yeah sure whatever :DQuote:
Originally Posted by hipro5
so we know hipro doesn't run nature first at least :D
what plastic spray do you use hipro
The one im using is 3M Scotch 1601 Clear:
http://products3.3m.com/catalog/us/e...er/output_html
Gave the rest of my card a coating the other day
Hi Hipro how are u, good to see you're still around :)
Very, Nice you deserve it!
Thanks guys...... :)
dinos I use "PLASTIK by CRAMOLIN"......from -70*C to +120*C.....I doesn't "break" after some time like others do..It's "elastic".... :)
What kind of thermal paste are you guys using for your pots in these tests? Just wondering what can handle those temps if I ever get to that point in my insanity.
For me its Arctic Ceramique all the way
ALWAYS ceramique =]
Really? I am a huge MX1 and now MX2 fan but have no experience with DICE and LN2. What other options are there for those temps? Liquidpro?
Sorry i dont know.
Ceramique i know works, and is available, and good, so i use it :)
Well that is enough to know right there I suppose. I guess next round I will have to get some MX2 and Ceramique. What types of temps have you guys got on Ceramique? I haven't heard anything from the notables like Hipro and Kingpin.
ONLY Arctic Ceramique in this worlds is supposed to work under subzero temps and don't lose it's carasteristics at ~ -195*C (if I remember well)......Quote:
Originally Posted by MaK2000
ALL others, loses their carasteristics under subzero..... ;)
Ahhh........I found some old tests of mine at only -22*C....IF you go lower, you're screwed with the others :D
http://www.thelab.gr/images/Hipro5/T...l_Day0_png.png
http://www.thelab.gr/images/Hipro5/T...l_Day1_png.png
http://www.thelab.gr/images/Hipro5/T...l_Day2_png.png
http://www.thelab.gr/images/Hipro5/T...l_Day3_png.png
http://www.thelab.gr/images/Hipro5/T...l_Day4_png.png
Thank you very much Hipro. Those results help a lot. This is the stuff right?
http://www.newegg.com/Product/Produc...82E16835100009
Your charts show basically Arctic Silver products other than Shin Etsu. Has anyone tried MX products? I figure so but have to ask.
Quote:
Originally Posted by MaK2000
Yes that's the one..... It also comes out at 12grams too (a bigger one).... :)
You have to test it by yourself.....OR look at companie's data for it's carasteristics IF they have tested under subzero..... ;)
Thank you again. Guess my night is done. You cleared all of my questions.
I thought of one more thing on my way to bed. Are you using Ceramique for CPU, GPU, and VGA mem? Also, wanted to say that Youngpro and T_M have some experience on their own. Didn't mean any offense. I had never heard of them until I did some searching.
No offense taken. I just looked at your post count :P
Hehe joking.
I never put TIM on my memory, why would you want/need to?
That should be referenced somewhere :)Quote:
Originally Posted by hipro5
talk about eating up cacheQuote:
Originally Posted by k|ngp|n
check out this run single 8800GT 700/999 and yorkfield at 4.8Ghz
LH 541FPS :shocked: :D
Quote:
Originally Posted by dinos22