FSB 601 on P5K-E & E6300 @ 4172Mhz on Water

Printable View

10-30-2007, 03:08 AM
SeLecT

FSB 601 on P5K-E & E6300 @ 4172Mhz on Water

Today i've tested an little E6300 with my watercooling und also my Asus P5K-E with the stock-heatpipe.

E6300 SL9SA L628B366
Asus P5K-E (Bios 0602)
2gig Crucial Value DDR2-800 with D9GKX
HD2900XT

Watercooling with D-Tek Fuzion on CPU & GPU.

FSB 601:

http://valid.x86-secret.com/show_oc.php?id=261387

http://www.abload.de/img/fsb600r90.png

Max Clock with watercooling:

http://valid.x86-secret.com/show_oc.php?id=261376

http://www.abload.de/img/4172mhz3kw.png

SuperPi 1M:

http://www.abload.de/img/superpipzk.png

Pics from my setup:

http://www.abload.de/thumb/setup6ge.jpg http://www.abload.de/thumb/cpue9q.jpg

Temp with 1,17V :D

http://www.abload.de/thumb/temptno.jpg http://www.abload.de/thumb/temp2bhu.jpg

Greetings,

Robert
10-30-2007, 03:20 AM
Timbosan

Awesome result, nice chip you got there mate :up:
What voltages did you use for the 601 FSB and max clock screen?
10-30-2007, 03:51 AM
SeLecT

Thx ;)

For the FSB-test all voltages of the mainboard was on maximum and the Vcore at 1,45V. For the maximum test the cpu got 1,58V.
10-30-2007, 04:53 AM
rbsmontemor

That's nice FSB, 600 on water :shocked:
10-30-2007, 05:05 AM
spectrum48

holy crap™:clap:
10-31-2007, 05:05 AM
SeLecT

Thx ;)

Here another superpi run with watercooling ;)

13.985 sec / SeLecT / E6300 @ 4063Mhz / 1,59V / FSB 580 / Crucial Value @ 580Mhz 5-4-4-5 2,55V / Wakü /

http://www.abload.de/img/1m28ft.png
10-31-2007, 05:50 AM
Timbosan

thats a good time for an an e6300 damn thats a good cpu. whats the max load temp?
10-31-2007, 07:12 AM
Florent

Really impressive FSB on improved Watercooling :shocked:

No test planned under more cold?
10-31-2007, 07:23 AM
massman

That's a killer chip :o
10-31-2007, 07:28 AM
Oliver

That is a sweet E6300 that can give massman battle under ln2 :D.
10-31-2007, 07:41 AM
SeLecT

Quote:

Originally Posted by Timbosan

thats a good time for an an e6300 damn thats a good cpu. whats the max load temp?

Thanks! I don't know the max load temp, because i've only tested SuperPi without watching the temperatures. In bios i had round about 30°C with ~1,6V.

Quote:

Originally Posted by Florent

Really impressive FSB on improved Watercooling :shocked:

No test planned under more cold?

No, because this cpu isn't mine and the owner want it back. today it is the last day with the cpu.

Quote:

Originally Posted by massman

That's a killer chip :o

Jeah, it is :D

Quote:

Originally Posted by Oliver

That is a sweet E6300 that can give massman battle under ln2 :D.

That's right, but i have no chance to test it now under cold. Maybe in a few weeks...
10-31-2007, 09:26 AM
Solarfall

damn thats one awesome e6300 :eek: congrats on the sweet clocks mate :toast::up:
10-31-2007, 09:37 AM
BeardyMan

Impressive :clap: ;)
10-31-2007, 09:56 AM
Cupcake

Holy Crap !!!
10-31-2007, 09:57 AM
MTP04

Sweet E6300:)

Have you tested other bios versions to find max fsb?
10-31-2007, 10:33 AM
SeLecT

Thx to all ;)

No, i've only tested the 0602, because i have no enough time. Maybe i can reach a higher fsb...
10-31-2007, 10:47 AM
Drager2

L628B rock!
BTW: wery nice pi time for those freq.!!!
10-31-2007, 10:54 AM
SeLecT

I don't know other times with the E6300 or E6400 @ ~4Ghz.... so i don't have a time to compare.
My run is without maxmen and copywaza...
10-31-2007, 03:03 PM
Zeus

Awesome FSB!

How do you get such low temps with watercooling?? I see core1 5C and core2 8C.
:confused:
10-31-2007, 10:18 PM
SeLecT

I Think these temps are readingerrors of the sensors. Outside it was ca. 10°C and with 1,59V the cpu hat round about 30°C.

The "core1 5C and core2 8C" were reading with 1,17V und idle...., but i don't think, they are right...
11-01-2007, 02:11 AM
asterix34

Great fsb,priceless a job...That can give massman battle under ln2
11-01-2007, 01:09 PM
lamboman

Damn that is nuts! Nice!:shocked:
11-01-2007, 01:33 PM
karandiru

very nice fsb you lucky.
11-02-2007, 01:20 PM
tuanming

Any mods used on the P5k-e wifi/ap and what's your board revision? Could you please post your bios settings, I temporarily purchased the P5k-e wifi/ap yesterday just to test out my e6300 and ram... Thanks.

The ram can do 600Mhz no problem, at least on 300 fsb on a 1:2 (2.1Ghz) with only 2.2v on the memory! And I accidentally update to the p5k-e latest beta bios but what i really wanted was the P5k-e wifi/ap ones (0602). Maybe that's why I failed the blend test on Prime95 and instability at 3.6Ghz or maybe this is as far as my e6300 can go?...
11-02-2007, 02:56 PM
SeLecT

No, there are no mods on the motherboard. It is all stock. I don't know the revision... when i have time i will look ;)

Here my bios settings:

(Boot with 540Mhz and then in windows with SetFSB)

http://www.abload.de/thumb/biosusl.png
11-02-2007, 11:41 PM
Zeus

I can't seem to find any revision number on my P5K-E.

Where can i find that?

Peeling off the sricker reveals P5K de luxe revision 1.0G iirc.

My pcb was made in Taiwan, how about yours SeLecT?
11-04-2007, 08:23 AM
SeLecT

I will look tomorow ;)
11-06-2007, 10:48 AM
skullfcuk

I have the same board and an engineering sample E6300 (BO stepping) And those results you have are incredible. I have managed a 500FSB into windows once. 500x7 .But i was only on one core ( i was using an install of XP from when i ran an AMD FX-53) so it wasn't enabling both cores in windows. Still, my fastest Pi time has been 16.1xx secs. But i would be happy to know some of your Bios settings, to see if i can replicate your success.

It would also help if i had a bigger rad than my XSPC 120:1 rad.:P
11-06-2007, 12:21 PM
krompirusa

Nice CPU you have there:up: What was your pll voltage??
11-06-2007, 12:56 PM
SeLecT

Here my bios-settings:

http://www.abload.de/image.php?img=biosusl.png
11-06-2007, 01:05 PM
CoW]8(0)

Do a bandwidth test in Sandra and make everyone jealous over @ Xtreme Bandwidth.
11-06-2007, 01:51 PM
SeLecT

The E6300 ist not anymore in my hands... it wasn't mine...

So i can't do an bandwidth test :/ sorry...