Printable View
I was wondering if anyone on these boards ordered MM's new case? If so, I was hoping people would share their impressions and opinions.
I pre-ordered mine and it is scheduled to be delivered on Friday 9/28. I'm hoping to move my system into the case this weekend and will try to remember to take some pictures.
Here's the link to the case I am referring to: http://www.mountainmods.com/computer...o-c-21_81.html
Ben has outdone him self again. what a pimpy lan case
Not me, but it looks really interesting. Looking forward for your pictures.
I was going to get one of these as it looks to be the perfect LAN case! :D
But shipping to OZ is a killer!:shakes: :(
looks like it should be an interesting mod
Mine arrived early this week. I was about to post pictures on the build (I am moving my home office PC into it. Love the case and its horizontal MB tray. Not big fan of the 5 1/4 bays but working with MM to come up with a solution - you have to have at least one 5 1/4 drive to make the bay work even blank cover slots!
Beautiful case, decent room inside. Too many screws - 14 on top alone and 7 more for each side!
I got mine earlier today and have only had a chance to unpack it. I'll probably start gutting my current case tonight and hope to have everything done tomorrow.
I agree, there are ALOT of screws, but I knew that prior to the purchase. The scary thing about ordering this case what that I ordered based of a sketch and did not know what the finished product was going to look like. I am very pleased with how it looks and my pre-build impressions are very positive.
More to follow. . .
http://i8.photobucket.com/albums/a27...y/DSC00979.jpg
http://i8.photobucket.com/albums/a27...y/DSC00978.jpg
Gorgeous MM case! Me likes :p:
It was a busy weekend, but I got the build up and running.
http://i8.photobucket.com/albums/a27...y/DSC00983.jpg
HD mount w/ 120MM Fan.
http://i8.photobucket.com/albums/a27...y/DSC00986.jpg
http://i8.photobucket.com/albums/a27...y/DSC00987.jpg
5.25" Bay module. I have since removed the multifunction device.
http://i8.photobucket.com/albums/a27...y/DSC00999.jpg
http://i8.photobucket.com/albums/a27...y/DSC00998.jpg
The bottom section.
http://i8.photobucket.com/albums/a27...y/DSC01000.jpg
Just about done.
http://i8.photobucket.com/albums/a27...y/DSC01001.jpg
http://i8.photobucket.com/albums/a27...y/DSC01002.jpg
http://i8.photobucket.com/albums/a27...y/DSC01003.jpg
http://i8.photobucket.com/albums/a27...y/DSC01004.jpg
The finished product.
There will be a few changes as I upgrade some parts here and there and eventually i will introduce some WCing, but until then that's about it.
Such a nice little LAN box :D Good job!
I love the mobo tray!!!!! right on Ben! Now have them in UV colors as well.
Looking good, illustrative pics, post some more keeping monitor aside.
You must use a full size 5 1/4 device that has a bottom. The reason this is, is that there is a acrylic part that screws into the bottom of the case and the bottom of the device to secure it to the case.Quote:
Originally Posted by jmc
You could put a plate in there though. Something like a DDC 5 1/4 mounting plate would do it.
Do you have a picture of what you are referring to? Whatever it is, it will need to have screw holes on the side so that the two side plates can screw into it so that it can secure the other devices. The bottom device is essentially the foundation, with the supplied parts it secures all the devices to the case.Quote:
Originally Posted by Jedda
It's just a flat plate with up turned edges that bolts across a 5 1/4 drive space.
Normaly a DDC pump sits on it. You could put any screw holes wanted in it.
Going by your description it sounded like it would do the job if you didn't want to mount a drive there.
http://img.photobucket.com/albums/v4.../pumpplate.jpg
The packet of bolts is the pump mount stuff. The plate screws in to a drive tower with normal drive screws.
very nice case you got there :)
+1. I was about to say the same thing.:)Quote:
Originally Posted by needmorstuff
If folks want a 3D wander around the H2G0, you can get the Google Sketchup Component for it over here: http://www.over-clock.com/ivb/index.php?showtopic=20383
http://www.thermochill.com/sketchup/...nModsH2G0L.jpg
sweet box, unfortunately cant get them in Aus :(... eBay doesn't even have them. Good job anyway.
MM will ship to aus, im sure of that, you should call them about it.
Got my H2G0 worklog up: "The Toaster" It does look like a toaster!
quit resurrecting these threads
I have that exact same case i am building with my son, the difference we are putting
2 swiftech 120.2's and the full set of Kookance waterlocks, a Q9300 and SLI 8800GTS 320's.
It's a sweet looking box, i can't wait to start putting the components in it.....
Regards
steve
We have the black wrinkle. I don't think the rad's will be mounted external but I have ordered 4 fans (the Metal ones), and some great fan filters which will be on hte outside and the rads on the inside, I think the effect will go over well. and on hte lower single the fans will be internal with silver mesh covers.
As far as the window, I love the way it looks, Kinda keeps the guts covered and yet exposes the MB and all the watercooling gear, To me the window cuts are stylish and add some character then just a big wondow like the Duality and UFO that i have....
I should have the parts in 2 weeks and I'll post some pics as it starts to grow.
Regards
steve