2.4C Abit IC7 and Gold

Printable View

07-12-2003, 10:43 AM
eva2000

2.4C Abit IC7 and Gold

Well finally got my IC7 setup with my new 9600PRO and here's some benchmarks for you guys :)

=================================================
2.4C | SL6WF | Costa Rica | Batch: 3312A396 | Pack date 05/12/2003
MCX4000 + 120x35mm Sunon 120cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
Netgear GA302T Gigabit NIC (rev B1)
520W Topower Gold Triple Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Abit IC7 rev 1.0 with 15 bios
vcore: 1.525v
vdimm: 2.8v
vAGP: 1.55v
AGP/PCI: Fixed 66/33
NB Strap: 800FSB

Game Accelerator: Auto
Refresh Cycle Time: Auto
Read Delay Adjust: Auto
Read Delay: Auto
Command Per Clock: Auto

PCI Latency: 64
SATA: disabled
Firewire: disabled
=================================================

CPU:DDR ratio = 1:1

2x 256MB OCZ PC3700 Gold Dual Channel @233mhz 2-3-3-7

Room Temp: 23-24C

Aida32 3.70 SPD reading

CPUZ & Winbond Doctor Temps @ idle

Sandra Max buffered memory = 5536 / 5545
Sandra Max unbuffered memory = 3149 / 3186

PCMark2002 = 6919 / 9844 / 1134

Aida Read = 5423 MB/s
Aida Write = 1772 MB/s

3dmark2001SE = 12,159
3Dmark2003 = 3462

Sandra MAX3 CPU = 8707 / (2305/5298)
Sandra MAX3 CPU Multimedia = 12930 / 19792

Sciencemark = 4721.53 MB/s

SuperPi 1m = 48s
SuperPi 16m = 19min 28s

Prime95 v23.4 Bench = 71.06s

Codecreatures
Total
Av frames/s = 24.7
max frams/s = 32
Av polys/s = 8.9 mio
max polys/s = 12.6 mio
total amount of frames =3231

GL Excess 1.2b
800x600@32 = 11,451
1024x768@32 = 8,548
1280x1024@32 = 6,679

CPU Burn In 1.01 + Prime95 v23.4 + StressCPU

=================================================
07-12-2003, 10:48 AM
Spawn

running at stock m8??..or overclocked??/...if oc'd wot divider and fsb u running it at...looks good...not too shabby...:)
07-12-2003, 10:50 AM
eva2000

Oh crap forgot to indicate the speeds :o
07-12-2003, 11:11 AM
Spawn

lol....:brick: think that icon sums it up as best as i could...:D
07-12-2003, 11:19 AM
eva2000

Spawn, i see you have the same cpu, memory, and hdd as my IC7 system.. :)

have you been able to use Game Accelerator modes other than AUTO at >200-233mhz memory speeds ?
07-12-2003, 11:23 AM
Spawn

at which divider m8???

i can get it at 1:1 at 234 fsb..then it wont work...but its not stable...

5:4 and 3:2 dividers...again i havent really tried m8..as i think my sticks are duff...ill def know by tues latest...im going to test them another setup exactly like mine....

to be honest i leave it all at auto with the last 2 entries disabled...havent really messed with timings as such as i cant run fsbs higher than 240 at 3:2 and 5:4 dividers on my ram...:(
07-12-2003, 11:49 AM
eva2000

at 1:1
07-12-2003, 12:41 PM
Spawn

well at 1:1 i can run max of 230 fsb with it set to street racer..all other entries set to auto and last 2 disabled...:)

dunno if thats good or bad...:confused:
07-12-2003, 05:10 PM
ryanpgroovy

You have street racer enabled :-O

amazing
:toast:
07-12-2003, 07:23 PM
retrospooty

Quote:

Originally posted by Spawn
well at 1:1 i can run max of 230 fsb with it set to street racer..all other entries set to auto and last 2 disabled...:)

dunno if thats good or bad...:confused:

Anything over 200 with Street racer enabled is good. I cant get over 205 with that enabled with my XMS3500.

I am seriously going to get some OCZ PC4200 when it comes out. OCZ is looking REALLY good these days.
07-12-2003, 09:26 PM
Creative

Nice results eva....u tried any 5/4 action as yet? :)

I didnt know pple regarded Street Racer so highlly? In that case my HyperX must fookin ROCK cos they can do 230 prime stable for ~10 mins at the following timings;

2-5-3-2/Street Racer/Strengthened/6/Enabled/Enabled @ 2.78vdimm

http://users.bigpond.net.au/creat/in...fsb2-5-3-2.JPG
and then stable at 230mhz
http://users.bigpond.net.au/creat/in...fsb2-5-3-2.JPG

Give me some vdimm dammit so I can see what these sticks REALLLLY can do :D
07-13-2003, 02:18 AM
eva2000

Quote:

Originally posted by Spawn
well at 1:1 i can run max of 230 fsb with it set to street racer..all other entries set to auto and last 2 disabled...:)

dunno if thats good or bad...:confused:

I'll have to try those settings as well

when i set GA to anything other than AUTO memtest86 quickly errors out or even memtest doesn't even load from floppy!
07-13-2003, 02:19 AM
eva2000

Quote:

Originally posted by Creative
Nice results eva....u tried any 5/4 action as yet? :)

I didnt know pple regarded Street Racer so highlly? In that case my HyperX must fookin ROCK cos they can do 230 prime stable for ~10 mins at the following timings;

2-5-3-2/Street Racer/Strengthened/6/Enabled/Enabled @ 2.78vdimm

Give me some vdimm dammit so I can see what these sticks REALLLLY can do :D

5:4 coming soon... :)
07-13-2003, 06:04 AM
Spawn

lol didnt realise street racer was meant to be good...

anywyas just ran a test on sandra 2k3...have it set to 234 fsb on the 1:1 divider which equates to a measly 2.88ghz out of my cpu...:( just wish i could get the holy grail mark of 250 fsb at 1:1....lol

right sorry i cant take no piccies as my webspace is playing up but figures are:

ram bandwidth int buff isse 5020 mb/s
ram bandwidth float buff isse 5016mb/s

so dunno if thats any good...:confused:

but thats as stable as its gonna get at 1:1 dividers....as for 3:2 and 5:4 i havent got a clue as the ram isnt stable at them dividers and at mo till i get myself sorted out running it in 1:1

oh by the way ram settings are all at spd....soon as i try to tighten them it wont boot...:(
07-13-2003, 12:15 PM
eva2000

spawn so you're ram at spd.. what is that set to in your bios ? as IC7 spd for ocz pc3700 gold on my board is 2.5-2-2-8!

heres OCZ PC3700 Gold @ 250mhz 2.5-4-3-7 at 2.8v

=================================================
2.4C | SL6WF | Costa Rica | Batch: 3312A396 | Pack date 05/12/2003
MCX4000 + 120x35mm Sunon 120cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
Netgear GA302T Gigabit NIC (rev B1)
520W Topower Gold Triple Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Abit IC7 rev 1.0 with 15 bios
vcore: 1.65v
vdimm: 2.8v
vAGP: 1.55v
AGP/PCI: Fixed 66/33
NB Strap: 800FSB

Game Accelerator: Auto
Refresh Cycle Time: Auto
Read Delay Adjust: Auto
Read Delay: Auto
Command Per Clock: Auto

PCI Latency: 64
SATA: disabled
Firewire: disabled
=================================================

CPU: DDR ratio = 1:1

2x 256MB OCZ PC3700 Gold Dual Channel @250mhz 2-4-3-7

Room Temp: 21-23C

Aida32 3.70 SPD reading

CPUZ & Winbond Doctor Temps @ idle

Sandra Max buffered memory = 5941 / 5903
Sandra Max unbuffered memory = 3262 / 3319

PCMark2002 = 7420 / 10690 / 1121

Aida Read = 5757 MB/s
Aida Write = 1963 MB/s

3dmark2001SE = 12,197
3Dmark2003 = 3467

Sandra MAX3 CPU = 9367 / (2598/5546)
Sandra MAX3 CPU Multimedia = 13900 / 21799

Sciencemark = 5019.59 MB/s

SuperPi 1m = 45s
SuperPi 16m = 18min 22s

Prime95 v23.4 Bench = 66.435s

GL Excess 1.2b
800x600@32 = accidently rebooted the wrong pc (benefits of using a kvm switch LOL)
1024x768@32 = 8,637
1280x1024@32 = 6,722

Prime95 v23.4 + StressCPU

=================================================
07-13-2003, 12:17 PM
ctgilles

How much voltage are you feeding them? :) (OCZ)
07-13-2003, 12:19 PM
eva2000

stated above if you look more closely :)

vdimm = 2.8v in bios (windows around 2.76-2.77v)
07-13-2003, 12:45 PM
Spawn

eva spd on my ic7g is 2.5-3-3-7...as far as i can remember...ill go home later and make sure...

at 250fsb u running in 5:4 or 3:2???
07-13-2003, 12:47 PM
eva2000

again ratio stated above ;)

250mhz 2.5-4-3-7 at 2.8v at CPU: DDR ratio = 1:1
07-13-2003, 12:48 PM
ctgilles

You think 3.1V action will get them at 2-5-2-2? :)
07-13-2003, 01:06 PM
Spawn

flippin heck eva...good score then at 250fsb at 1:1 divider.....i cant get that close....
07-14-2003, 07:51 AM
eva2000

255mhz 2.5-4-4-7 at 2.8v 1:1 ratio :)

=================================================
2.4C | SL6WF | Costa Rica | Batch: 3312A396 | Pack date 05/12/2003
MCX4000 + 120x35mm Sunon 120cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
Netgear GA302T Gigabit NIC (rev B1)
520W Topower Gold Triple Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Abit IC7 rev 1.0 with 15 bios
vcore: 1.675v
vdimm: 2.8v
vAGP: 1.55v
AGP/PCI: Fixed 66/33
NB Strap: 800FSB

Game Accelerator: Auto
Refresh Cycle Time: Auto
Read Delay Adjust: Auto
Read Delay: Auto
Command Per Clock: Auto

PCI Latency: 64
SATA: disabled
Firewire: disabled
=================================================

CPU: DDR ratio = 1:1

2x 256MB OCZ PC3700 Gold Dual Channel @255mhz 2.5-4-4-7

Room Temp: 21-24C

CPUZ & Winbond Doctor Temps @ idle

Sandra Max buffered memory = 5943 / 5962
Sandra Max unbuffered memory = 3178 / 3260

PCMark2002 = 7606 / 10630 / 1159

Aida Read = 5805 MB/s
Aida Write = 1970 MB/s

3dmark2001SE = 12,261
3Dmark2003 = 3465

Sandra MAX3 CPU = 9367 / (2598/5546)
Sandra MAX3 CPU Multimedia = 14165 / 22355

Sciencemark = 5039.45 MB/s

SuperPi 1m = 45s
SuperPi 16m = 18min 08s

Prime95 v23.4 Bench = 65.417s

=================================================
07-14-2003, 08:03 AM
eva2000

2x 256MB OCZ PC3700 Gold Dual Channel @255mhz 2.5-4-4-8 1:1

=================================================
2.4C | SL6WF | Costa Rica | Batch: 3312A396 | Pack date 05/12/2003
MCX4000 + 120x35mm Sunon 120cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
Netgear GA302T Gigabit NIC (rev B1)
520W Topower Gold Triple Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Abit IC7 rev 1.0 with 15 bios
vcore: 1.675v
vdimm: 2.8v
vAGP: 1.55v
AGP/PCI: Fixed 66/33
NB Strap: 800FSB

Game Accelerator: Auto
Refresh Cycle Time: Auto
Read Delay Adjust: Auto
Read Delay: Auto
Command Per Clock: Auto

PCI Latency: 64
SATA: disabled
Firewire: disabled
=================================================

CPU: DDR ratio = 1:1

2x 256MB OCZ PC3700 Gold Dual Channel @255mhz 2.5-4-4-8

Room Temp: 21-24C

CPUZ & Winbond Doctor Temps @ idle

Sandra Max buffered memory = 6068 / 5984
Sandra Max unbuffered memory = 3325 / 3294

PCMark2002 = 7644 / 10699 / 1112

Aida Read = 5810 MB/s
Aida Write = 1991 MB/s

3dmark2001SE = 12,299
3Dmark2003 = 3457

Sciencemark = 5060.23 MB/s

SuperPi 1m = 44s
SuperPi 16m = 18min 10s

Prime95 v23.4 Bench = 65.367s

GL Excess 1.2b
800x600@32 = 11,874
1024x768@32 = 8,794

=================================================

seems 2.5-4-4-8 was faster in most benchies than 2.5-4-4-7
07-14-2003, 08:42 AM
eva2000

compared to GEIL PC3700 Golden Dragon

CPU: DDR ratio = 1:1

2x 256MB GEIL PC3700 Golden Dragon Dual Channel @245mhz 2.5-4-4-7

=================================================
2.8C | SL6WJ | Malaysia | L308A678 | 4/4/03
AX478 + 80x38mm Delta 80cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO VIVO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
520W Topower Gold Dual Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Albatron PX865PE PRO2 1.02 beta bios

vcore: 1.6v
vdimm: 2.85v
vAGP: 1.6v
AGP/PCI: Fixed 66/33
Enhanced Performance: Enabled
Overclocking Stability DDRAM: Standard

PCI Latency: 64
SATA: disabled
Promise Raid: disabled
=================================================

CPU: DDR ratio = 1:1

2x 256MB GEIL PC3700 Golden Dragon Dual Channel @245mhz 2.5-4-4-7

Room Temp: 21-23C

CPUZ & MBM 5.330

Sandra Max buffered memory = 5505 / 5568
Sandra Max unbuffered memory = 2637 / 2728

PCMark2002 = 8511 / 9536 / 1097

Aida Read = 5138 MB/s
Aida Write = 1435 MB/s

3dmark2001SE = 12,488
3dmark2001SE @501mhz core/ 339mhz memory = 14,402
3Dmark2003 = 3499

Sciencemark = 4518.83 MB/s

SuperPi 1m = 42s
SuperPi 16m = 17min 16s

Prime95 v23.4 Bench = 59.069s

=================================================
07-18-2003, 05:52 AM
eva2000

now 250mhz 3-4-4-8 to compare with above

=================================================
2.4C | SL6WF | Costa Rica | Batch: 3312A396 | Pack date 05/12/2003
MCX4000 + 120x35mm Sunon 120cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
Netgear GA302T Gigabit NIC (rev B1)
520W Topower Gold Triple Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Abit IC7 rev 1.0 with 15 bios
vcore: 1.75v
vdimm: 2.8v
vAGP: 1.6v
AGP/PCI: Fixed 66/33
NB Strap: 800FSB

Game Accelerator: Auto
Refresh Cycle Time: Auto
Read Delay Adjust: Auto
Read Delay: Auto
Command Per Clock: Auto

PCI Latency: 64
SATA: disabled
Firewire: disabled
=================================================

CPU: DDR ratio = 1:1

2x 256MB OCZ PC3700 Gold Dual Channel @250mhz 3-4-4-8

Room Temp: 24.5 - 28C

Sandra Max buffered memory = 5865 / 5948
Sandra Max unbuffered memory = 3266 / 3255

PCMark2002 = 7468 / 10438 / 1099

Aida Read = 5681 MB/s
Aida Write = 1937 MB/s

3dmark2001SE = 12,205
3Dmark2003 = 3464

Sandra MAX3 CPU = 8930 / (2600/5558)
Sandra MAX3 CPU Multimedia = 13883 / 21176

Sciencemark = 4947.71 MB/s

SuperPi 1m = 45s
SuperPi 16m = 18min 13s

Prime95 v23.4 Bench = 66.58s
=================================================
07-18-2003, 05:52 AM
eva2000

now 255mhz 3-4-4-8 at 2.8v

=================================================
2.4C | SL6WF | Costa Rica | Batch: 3312A396 | Pack date 05/12/2003
MCX4000 + 120x35mm Sunon 120cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
Netgear GA302T Gigabit NIC (rev B1)
520W Topower Gold Triple Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Abit IC7 rev 1.0 with 15 bios
vcore: 1.75v
vdimm: 2.8v
vAGP: 1.6v
AGP/PCI: Fixed 66/33
NB Strap: 800FSB

Game Accelerator: Auto
Refresh Cycle Time: Auto
Read Delay Adjust: Auto
Read Delay: Auto
Command Per Clock: Auto

PCI Latency: 64
SATA: disabled
Firewire: disabled
=================================================

CPU: DDR ratio = 1:1

2x 256MB OCZ PC3700 Gold Dual Channel @255mhz 3-4-4-8

Room Temp: 24.5 - 28C

Sandra Max buffered memory = 6002 / 6022
Sandra Max unbuffered memory = 3190 / 3265

PCMark2002 = 7605 / 10633 / 1122

Aida Read = 5804 MB/s
Aida Write = 1944 MB/s

3dmark2001SE = kept dropping to desktop (but can do 255mhz 2.5-4-4-7 and 2.5-4-4-8 :confused:
3Dmark2003 = 3467

Sandra MAX3 CPU = 9270 / (2652/5910)
Sandra MAX3 CPU Multimedia = 14164 / 22434

Sciencemark = 5018.89 MB/s

SuperPi 1m = 45s
SuperPi 16m = 17min 52s

Prime95 v23.4 Bench = 65.408s
=================================================
07-18-2003, 06:05 AM
eva2000

5:4 ratio

275FSB
2x 256MB OCZ PC3700 Gold Dual Channel @220mhz 2-3-3-6

=================================================
2.4C | SL6WF | Costa Rica | Batch: 3312A396 | Pack date 05/12/2003
MCX4000 + 120x35mm Sunon 120cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
Netgear GA302T Gigabit NIC (rev B1)
520W Topower Gold Triple Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Abit IC7 rev 1.0 with 15 bios
vcore: 1.8v
vdimm: 2.8v
vAGP: 1.6v
AGP/PCI: Fixed 66/33
NB Strap: 800FSB

Game Accelerator: Auto
Refresh Cycle Time: Auto
Read Delay Adjust: Auto
Read Delay: Disabled
Command Per Clock: Disabled

PCI Latency: 64
SATA: disabled
Firewire: disabled
=================================================

Room Temp: 24.5 - 28C

Sandra Max buffered memory = 6025 / 5991
Sandra Max unbuffered memory = 2948 / 3017

PCMark2002 = 8174 / 10909 / 1105

Aida Read = 5666 MB/s
Aida Write = 1914 MB/s

3dmark2001SE = 12,511
3Dmark2003 = 3483

Sandra MAX3 CPU = 10211 / (2855/6014)
Sandra MAX3 CPU Multimedia = 15251 / 23998

Sciencemark = 5063.90 MB/s

SuperPi 1m = 42s
SuperPi 16m = 17min 06s

Prime95 v23.4 Bench = 60.791s
=================================================
07-18-2003, 06:06 AM
eva2000

5:4 ratio

250FSB
2x 256MB OCZ PC3700 Gold Dual Channel @200mhz 2-3-3-6

=================================================
2.4C | SL6WF | Costa Rica | Batch: 3312A396 | Pack date 05/12/2003
MCX4000 + 120x35mm Sunon 120cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
Netgear GA302T Gigabit NIC (rev B1)
520W Topower Gold Triple Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Abit IC7 rev 1.0 with 15 bios
vcore: 1.8v
vdimm: 2.8v
vAGP: 1.6v
AGP/PCI: Fixed 66/33
NB Strap: 800FSB

Game Accelerator: Auto
Refresh Cycle Time: Auto
Read Delay Adjust: Auto
Read Delay: Disabled
Command Per Clock: Disabled

PCI Latency: 64
SATA: disabled
Firewire: disabled
=================================================

Room Temp: 24.5 - 28C

Sandra Max buffered memory = 5502 / 5499
Sandra Max unbuffered memory = 2861 / 2842

PCMark2002 = 7459 / 9891 / 1087

Aida Read = 5238 MB/s
Aida Write = 1746 MB/s

3dmark2001SE = 12,304
3Dmark2003 = 3461

Sandra MAX3 CPU = 9407 / (2596/5754)
Sandra MAX3 CPU Multimedia = 10369 / 20642

Sciencemark = 4630.36 MB/s

SuperPi 1m = 46s
SuperPi 16m = 18min 16s

Prime95 v23.4 Bench = 66.836s
=================================================
07-18-2003, 07:55 AM
eva2000

http://www.fileshosts.com/pentium4/D...old/table1.jpg

http://www.fileshosts.com/pentium4/D...old/table2.jpg

All times are GMT -8. The time now is 10:10 AM.

XtremeSystems