http://www.cpuid.com/beta/cpuz.zip
I belive this is still kinda beta, correct me if i am wroong.
Printable View
http://www.cpuid.com/beta/cpuz.zip
I belive this is still kinda beta, correct me if i am wroong.
No more lock ups for me. :up:
It also shows more information about my PC than older versions. :woot:
Thanks!:)
tankkyooo
The core voltage is wrong for now with 1.40.8 was about right.
Thanks for the efforts :)
Thanks for the update.
thanks you Richard for posting this :up:
Thanks Franck. :)
Sweet, thanks for the update
fixed my cpu voltage... sweet.
Ryan
When will CPU-Z go to 1.41 final?
is it possible to have vdimm on cpuz, and/or NB voltage ?
cpuz would be the ultimate program if it had temperature readings.
Ryan
Finally shows correct volts for my Q6600.
:up:
This new release includes monitoring features. I greatly underestimated the work, and this is really hard to tune up.
In 1.41, the monitoring will only be reported in the txt report. I'll study for a next release the opportunity to put monitoring in the GUI.
Still getting false Vcore :( 1.32V instead of 1.4V.
I posted is in the cpu-z forums, but got no responses. As you can see the processor is a Merom running under Vista on a Inspiron 1520 Laptop
since 1.40.8 cpuz doesnt show mem frequency correctly
cpuz 1.40.5 reg dump is attached
correct mem freq is 333Mhz not 200Mhz that shows since 1.40.8
btw: is from my laptop :D
thanks
perfect, thanks for the quick updated
voltage measurement is corrected now, it's same as the smart guardian read
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CPU-Z 1.41 has been has released.
a.. New CPU voltage monitoring.
b.. Intel Xeon Tigerton support.
c.. Intel IA64 CPUs support (Itanium / Itanium2).
(Special thanks to Rami Radi and Ray Hinchliffe for their help)
d.. AMD K10 Phenom preliminary support.
e.. NVIDIA MCP73 support.
f.. Intel XMP profiles support.
g.. Memory modules nominal voltage.
Direct download : http://www.cpuid.com/download/cpu-z-141.zip
CPU-Z page : http://www.cpuid.com/cpuz.php
Validator : http://valid.x86-secret.com/
Forum : http://forum.x86-secret.com/forumdisplay.php?f=16
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Unfortunately I have no Barcelona, so I check cpuz.exe with a eXeScope,
a Windows application customizing utility, and I noticed that
Barcelona logo has been revised/replaced :)
By 1.41.0 beta:
http://222.151.186.187/c-board/file/...henom-logo.png
Now by 1.41 official:
http://222.151.186.187/c-board/file/...teron-logo.png
Many thanks to Franck(as cpuz here in XS), as usual:up:
And I hope Barcelona gives us something surprising...
every time there is a new version of CPUz i always think whether there are any validation screens that i haven't put up yet :( :D :shrug: :D heheheh