CellShock DDR2 PC2-9200 1150MHz 5-5-5-18 GKX

Printable View

08-12-2007, 02:23 PM
hiwa

CellShock DDR2 PC2-9200 1150MHz 5-5-5-18 GKX

DDR2 1150MHz
memory kit from CellShock.
Currently the fastest memory kit from CellShock. Two matched 1GB modules equipped with CellShocks new style red heatspreaders. 8-layer PCB and built with Micron D9GKX 64Mx8 chips.
http://www.pctunerup.com/up/results/...16192808_1.jpg

http://www.pctunerup.com/up/results/...16192830_2.jpg

http://www.pctunerup.com/up/results/...16192858_3.jpg

http://www.pctunerup.com/up/results/...16193030_4.jpg

http://www.pctunerup.com/up/results/...16193052_5.jpg

2.55 CAS4 @ 641.5

http://www.pctunerup.com/up/results/...193208_641.jpg

a 630 cas 4 SPI 32 525x8

http://www.pctunerup.com/up/results/...193251_630.jpg

cas 3 a 487.8 2.55

http://www.pctunerup.com/up/results/...193318_487.jpg

cas 4 600 2.45 30mins Orthos stable

http://www.pctunerup.com/up/results/...3453_600st.jpg
08-12-2007, 02:48 PM
Exedy

sweet red :)

Please, can you try max oc with 2.4v and 1T?

Thanks for share
08-12-2007, 05:31 PM
p47

very nice 'red'.. how much the price??
yup, try until the max oc..
08-12-2007, 05:55 PM
zanzabar

im also courious about the price the black label stuff is $300 so is that some $500 or somehting

and what kind of voltage can those sticks take
08-12-2007, 06:15 PM
Timbosan

Whats max MHz at ~2.1v & 5-5-5-15?
08-13-2007, 12:47 AM
hiwa

CAS4 @ 641.5 2.55bios

http://m1.freeshare.us/166fs827188_th.jpg

a 630 cas 4 SPI 32 525x8

http://m1.freeshare.us/166fs826967_th.jpg

1mb 525x8

http://m1.freeshare.us/166fs827041_th.jpg
08-13-2007, 12:49 AM
hiwa

Hi all the pri is 380 euro , they are last DDR2 kits from CellShock so i think they are special edition

will be try another test :D
08-13-2007, 02:28 AM
p47

what's the memory chip? is it micron D9GKX, D9GCT or what??
08-13-2007, 02:34 AM
Viss

Results are not too bad, just like first sets of the other Cellshock weve seen... Cas 4 is good but for that price you can get 4gb PC8500 Ballistix. I know what id choose. IC's should be D9GKX.
08-13-2007, 03:39 AM
Jungle beat

Maybe 4gb are better than 2gb , but 630 with those timings and at that voltage . . . . only with gkx, and i think only with cellshock pc9200 ! ;)
08-13-2007, 03:40 AM
boblemagnifique

Quote:

Originally Posted by p47

what's the memory chip? is it micron D9GKX, D9GCT or what??

D9GKX i think , same chips for pc8000c4 :)
08-13-2007, 03:51 AM
1Day

The cost of the memory kit is € 204.00 from memoryC.com
08-13-2007, 04:42 AM
p47

thanks guys for the info, D9GKX is the best one for ddr2..
08-13-2007, 05:32 AM
hiwa

Quote:

Originally Posted by 1Day

The cost of the memory kit is € 204.00 from memoryC.com

:eek: :eek: :yawn2: :yawn2:
08-13-2007, 06:23 AM
superray

This kit is awsome!
08-13-2007, 11:38 AM
ent

They cost 204 euro but without VAT :D

hiwa >> could you also show a Memset on screens?
08-13-2007, 12:12 PM
TEDY

omg what price, you get for half very good d9gkx/d9gmh crucial :)
08-14-2007, 04:06 AM
hiwa

cas 3 a 487.8 2.55 :D

http://m1.freeshare.us/167fs242975_th.jpg
08-14-2007, 07:14 AM
1nfern0

Too XPENSIVE! You can use G.SKILL HZ instead with OC. It can be rised to ~1200 at 4-4-4-12 and 5-5-5-15 (more stable) with 2.4-2.5vDimm.
08-14-2007, 04:19 PM
Timbosan

They cost $615.55 Australian! Thats 3 times more expensive than the crucial ballistix non-tracer.
08-15-2007, 12:48 AM
Don_Dan

Yes, but here in Germany the price is very competitive compared to all the other brands.
08-15-2007, 07:21 AM
arvardai

:shocked: post memoset twenk's please

p5k se cellschok ddr1000 gkx 2,35vd 1T

http://img131.imageshack.us/img131/1588/memo51tre3.jpg
Shot at 2007-08-15
08-20-2007, 10:42 AM
2good4you

Quote:

Originally Posted by hiwa

CAS4 @ 641.5 2.55bios

http://m1.freeshare.us/166fs827188_th.jpg

a 630 cas 4 SPI 32 525x8

http://m1.freeshare.us/166fs826967_th.jpg

1mb 525x8

http://m1.freeshare.us/166fs827041_th.jpg

Very good CL4 results. Smells handpicked GKX /w 8layer PCB
08-24-2007, 10:00 PM
giraffen

Quote:

Originally Posted by Timbosan

They cost $615.55 Australian! Thats 3 times more expensive than the crucial ballistix non-tracer.

:shocked: expensive:shocked:
10-29-2007, 01:43 PM
camouflage

:D Just owned me one kit:

http://img98.imageshack.us/img98/880...ware003cs7.jpg

My 24/7 settings 4-4-4-2 at reasonable voltage of 2.45 and nice subtimings:

http://img113.imageshack.us/img113/6...hock32mod8.jpg

:up:
10-30-2007, 12:01 AM
saaya

weird how the price for mem is varying so much from one country to the other and too bad its so expensive compared to other kits in some countries :(

in germany its the same price or cheaper compared to other brands :D
nice results :toast:
10-31-2007, 02:05 PM
JoeBar

It's logical, since cellshock is a German company. Here is on par with other high end modules too and sometimes a bit cheaper... :)
11-12-2007, 03:42 AM
camouflage

Quote:

Originally Posted by JoeBar

It's logical, since cellshock is a German company. Here is on par with other high end modules too and sometimes a bit cheaper... :)

:D True, but buy cheap often means buy twice..................:rolleyes:

Here are some posts of mine to show performance done with the "red devils":

http://www.xtremesystems.org/forums/...d.php?t=165329

:up:
11-12-2007, 02:34 PM
marauder16

@camouflage: 2.45V for 24/7? omg, if you don't have some very nice airflow over them they're so gonna die on you, I've read (and felt it on my skin) that these D9GKX ICs can't handle more than 2.25-2.3V for 24/7...
11-13-2007, 05:32 AM
camouflage

Quote:

Originally Posted by marauder16

@camouflage: 2.45V for 24/7? omg, if you don't have some very nice airflow over them they're so gonna die on you, I've read (and felt it on my skin) that these D9GKX ICs can't handle more than 2.25-2.3V for 24/7...

:D Don't worry about - these baybies can bare a lot more:

http://www.xtremesystems.org/forums/...d.php?t=142691

Powered with 2.81 Vmem and still alive................:up:

BTW - got 2 x 120mm Papst fans blowing to the mobo & RAM section....

:welcome:
11-13-2007, 06:16 AM
saaya

high voltage isnt the problem i thinki, i thought it was heat but i now think the biggest problem is voltage fluctuation. the more mem you use and the more chips on each stick, the heavier they pull amps when the board boots or reboots or even when it goes from idle to load... i think those voltage fluctuations actually damage and kill the mem, not the voltage being high.

the higher you set the volts on your board the more it fluctuates though, so this doesnt mean high volts are not dangerous. i think the best is to use a maximizer as it keeps the mem voltage stable no matter what.
11-13-2007, 07:22 AM
marauder16

which rails does the RAM use? if it uses +3.3V and +5V then my PSU killed both of my kits :D
11-14-2007, 01:47 AM
saaya

depends on the board, im not up to date but in the late ddr1 days most high end boards switched from 3.3v to 5v to create vdimm.

im pretty sure most ddr2 boards use 3.3v to create vdimm though since the target voltage is 2.5v max for most boards and 3.3v is just fine for that.
11-14-2007, 04:45 AM
marauder16

hm, now I'm confused. My PSU has a noticeable ripple only at +5V rail, and I think that might have killed my RAM, cause it didn't ever receive more than 2.36V (with OCZ RAM cooler). And Cellshock RAMs don't die easily, don't know what is it anymore... thnx anyway
11-14-2007, 05:55 AM
camouflage

:D BTW - CELLSHOCK themself recoomends up to 2.4 volts:

http://img98.imageshack.us/img98/880...ware003cs7.jpg

I also use a P5E board - has 2-phase Vmem rails..........:up:
11-16-2007, 10:35 AM
hiwa

Reupload all Screens ;)

All times are GMT -8. The time now is 06:08 PM.

XtremeSystems