+5200mhz E6850 on BIOSTAR TP35D2-A7

I tested MY E6850 on a Biostar T35D2-A7 (100$ Moterboard :eek: )

retail E6850
Biostar TP35D2-A7 (unmoded)
Antec True power Trio 550w
2*1go crucial Ballistix 8500
Jetway HD 2900 xt
2 stages cascade made by Skirms (-105° @ evaporator)

http://www.pt1t.net/biostar/TP35D2-A7%20001.jpg

http://www.pt1t.net/E6850/TP35D2-A7%20004.jpg

http://www.pt1t.net/E6850/TP35D2-A7%20002.jpg

http://www.pt1t.net/E6850/E6850_585X9_TP35D2.PNG

http://www.pt1t.net/E6850/E6850_586X9_TP35D2.jpg

http://www.pt1t.net/E6850/E6850_580X9_wprime32.PNG

*** Biostar P35 review on OCM ***


It s good for one of the cheapest P35 motherboard :D

wow! nice results man! $100 mobo's beating the cr*p out of more expensive ones. :D hehehe

What kind of fsb speeds will most of those Biostar TP35D2-A7 boards do without mods?

Regards

Quote:

---

Originally Posted by x3ro

What kind of fsb speeds will most of those Biostar TP35D2-A7 boards do without mods?

Regards

---

~590mhz

Quote:

---

Originally Posted by Pt1t

~590mhz

---

ow ok so the speeds u reached with it is just with a full stock retail board?

Quote:

---

Originally Posted by x3ro

ow ok so the speeds u reached with it is just with a full stock retail board?

---

yes

now Pt1t is showing his results.. :)

very very nice board.. :)

:woot:

Awesome awesome results with a retail chip and a budget board. :clap: That's the sorta stuff I love to see.

really excellent scores on such cheap board :toast:

Great!!! Awesome results :toast:

BTW the board is out of breath to show the temp :D

Quote:

---

Originally Posted by before

Great!!! Awesome results :toast:

BTW the board is out of breath to show the temp :D

---

Xavier, Send me on msn vdrop pic mod of Tforce p965 plz.

Nice review and results as always. The hw monitor is :ROTF:

Very nice budget mobo.Great results dude

nice result there. insulation around the socket looks easy - is the area around it totally free of parts?
that would be another good point for this board as I hate most ones with condensors and resistors and whatever around the socket :/

Quote:

---

Originally Posted by SoF

nice result there. insulation around the socket looks easy - is the area around it totally free of parts?
that would be another good point for this board as I hate most ones with condensors and resistors and whatever around the socket :/

---

http://www.pt1t.net/biostar/tp35d2_socket.JPG

Hi Pt1t,

How many volts can give this motherboard to cpu and memories?

Thanks

Quote:

---

Originally Posted by Darkmaster

Hi Pt1t,

How many volts can give this motherboard to cpu and memories?

Thanks

---

2.6v for Dimm and 2.15v for cpu :D

Quote:

---

Originally Posted by Pt1t

2.6v for Dimm and 2.15v for cpu :D

---

Wow.. thank you.. very good for a 100$ motherboard :D

Sorry.. can you tell me if this motherboard drop too much? how much does it drop? (sorry for my bad english :cool: )

Quote:

---

Originally Posted by Darkmaster

Wow.. thank you.. very good for a 100$ motherboard :D

Sorry.. can you tell me if this motherboard drop too much? how much does it drop? (sorry for my bad english :cool: )

---

~0.04v like P5K

Quote:

---

Originally Posted by Pt1t

~0.04v like P5K

---

Thank you very much, man :)

:up:

what vmch/vtt/vsb/vich you using?? i'm guessing new bios furthered fsb average for most users?? I remember when the board first came out, most people were topping around the 500fsb mark.

subtimings fixed yet or still a problem? any way to adjust the performance level from bios?

Another question.. can you tell me if it is possible to change multiplier? (our team has got an X6800...)

Quote:

---

Originally Posted by fireice2

wow! nice results man! $100 mobo's beating the cr*p out of more expensive ones. :D hehehe

---

biostar use solid caps and bios that are simple to use(4 voltages),unlike the dfi rd600 which is crazy(10+ voltages).i would never buy another "top"name brand board again after trying em all threw the years. im currently using my biostar 965pt and there simply mind blowing for anyone who wants hi fsb for tops $120.asus,dfi,gigabyte,msi are all way to much money and always seem lately to have somthing buggy with them and there new mobos needing new bios,this mod,that mod for 400-500fsb attempts.the biostars are screamers right out of the box period.
AMAZING but pretty typical of biostar and there p965\p35 mobos they bring to us without the stupid price tags others feel they must charge with average performance,thanks biostar!!

biostar is foxconn btw...,.,.,

i bought 3 biostar 965pts for $50 each open box at newegg.2 sitting nice and comfy in my closet and flashed with newest bios after being tested. 3 mobos $150,rofl!?1?!?! might sell 1...pm


AMAZING OVERCLOCK btw.....

Quote:

---

Originally Posted by Darkmaster

Another question.. can you tell me if it is possible to change multiplier? (our team has got an X6800...)

---

Yes it is possible.

Fsb is also good on a Quad Core Watercooled

http://valid.x86-secret.com/show_oc.php?id=219713

http://valid.x86-secret.com/cache/219713.png

Quote:

---

Originally Posted by ziddey

what vmch/vtt/vsb/vich you using?? i'm guessing new bios furthered fsb average for most users?? I remember when the board first came out, most people were topping around the 500fsb mark.

subtimings fixed yet or still a problem? any way to adjust the performance level from bios?

---

Wich Board , The TP35D2 or P965 ?

Because to Reach Higher FSB than 500 mhz , you 'll have The CPU without FSB Wall @ 500 mhz .

vFSB and Vmch are Good in Auto for 500mhz :)

http://www.pt1t.net/biostar/BIOSTP35D2A7-4.jpg

Thank you for response..! You are great pt1t !!

Do you know some vmod for this motherboard? Or pencil mod?
Can you set all memories timings on this mobo?

I think it will be my new motherboard for little benchmarks session :D

cool. it was the p35 variant of the board. i believe rebel's haven did a review of it among others when it first came out and ended around 500.

too many choices. awesome results

I'd like to see other users results.

i have one on the way so will tell ya soon what i come up with. i have an e6300 that can do 500+. i have crucial tracer pc8000s on the way to so i will post as soon as i get everything going. do you think i might be able to uninstall the 965 drivers from the tforce 965pt and install the p35 drivers and be fine?

edit: ahhhhh i hate this i had to order a 6550. i couldnt help myself so hopefully its G0 and it makes a good setup. my setup now will be for sale.

An other Sub 10min 32M with those new E6850 Baby :)

Motherboard unmodded , and no Maxmem an other tweak :o

http://www.pt1t.net/E6850/E6850_32M_9m54.PNG

http://www.pt1t.net/E6850/config_biostar5.jpg

http://www.pt1t.net/E6850/config_biostar6.jpg

http://www.pt1t.net/E6850/config_biostar7.jpg

http://www.pt1t.net/E6850/config_biostar8.jpg

http://www.pt1t.net/E6850/config_biostar9.jpg

:D

And Some 3D with an HD 2900xt Stock cooled.

http://www.pt1t.net/E6850/2k1_84173.PNG

http://www.pt1t.net/E6850/2k5_27516.PNG

Very good Motherboard for 105€ , i think order soon :D

nice OC :up: :up: :up:

Great results :toast:

and my first Pifast & Aquamark for the road :p

5200mhz, and 2900 xt @ 860/1050 (air no mod)

http://www.pt1t.net/E6850/aquamark_8...00mhz_230k.JPG

http://www.pt1t.net/E6850/Pfast_5270_17_98s.PNG

heres a quick boot at 500fsb. im on water and have a fan on northbridge heatsink. only been up and runnin like 15 minutes so lots more to come. i will keep you guys posted and will post more pics. im happy everything is runnin great. :D :) :up:

:toast:

edit: 520 at 1.36 vcore, nb 1.58 volts, fsb 1.35 volts, memory 2.14 volts. very happy lol. cpu z read the right vcore.

looks nice. May have to pick up one of these boards :)

Holy:banana::banana::banana::banana:, That´s a nice board for about 100$

Mine arrives tomorrow! I can't wait!

Mine arrives today.
I hope for vmodds for the next week.:D
And test with mobo my cpus.

i can boot at 522fsb at 1.36 vcore and im super pi stable and a few other benchmarks i can do. but not 100% stable and i can not boot 523fsb i will keep tryin to figure it out. very nice board so far with 500fsb 100% stable at 1.34 vcore and havent tried higher for 100% stable yet but will. everybody who gets this board for 100 bucks will be very very happy. i know i am and its a joy to see high fsb:D .


:toast:

EDIT: ok my ram can go 570+ and i dropped multi to 6 but still only 522fsb boots and not 523fsb. could somebody tell me what it could be. either board or cpu wall. im hoping board but not sure. havent tried more than 1.52 vcore but im not scared to push it a lot higher.

awsome scores there .

god job! :clap:

Retail Q6600 G0 , Water ~15°

on biostar TP35D2-A7

http://valid.x86-secret.com/show_oc.php?id=227044 (not the max , i have got the time to screen :) )
http://www.pt1t.net/Q6600/Q6600_CPUZ_480X9_wc.PNG

1M
http://www.pt1t.net/Q6600/Q6600_1M_466X9_WC.PNG

32M
http://www.pt1t.net/Q6600/Q6600_32M_466X9_Wc.PNG

:D


And max FSB of the Q6600

http://valid.x86-secret.com/show_oc.php?id=227056

http://valid.x86-secret.com/cache/227056.png

wow!! that's a really nice quad you got there mate. :D

Quote:

---

Originally Posted by fireice2

wow!! that's a really nice quad you got there mate. :D

---

-->cascade tomorow morning, and i hope it will take +50mhz fsb :D

Good job seems you found yourself a good one neighbour.

Nice board you have. I almost just bought one but seem like a few lately have had some problems with them. Would like to see a few more results on this mb from different guys here.

Any air results? Thanks:up:

Yet another Biostar board that is great but not for sale in AU :( :down:

Quote:

---

Originally Posted by Pt1t

-->cascade tomorow morning, and i hope it will take +50mhz fsb :D

---

i eagerly wait for the results.. from the cascade run.

Quote:

---

Originally Posted by Solarfall

i eagerly wait for the results.. from the cascade run.

---

http://www.xtremesystems.org/forums/...d.php?t=154677

results are there.

Very nice clocks and performance for a value board.

Does any one have any information on bios updates for this board? Im having some issues overclocking because of my DDR2-800 topping out :/ it doesnt have much in the way of options to reduce the ram speed

Quote:

---

Originally Posted by Spawne32

Does any one have any information on bios updates for this board? Im having some issues overclocking because of my DDR2-800 topping out :/ it doesnt have much in the way of options to reduce the ram speed

---

its P35...no memory dividers, just ratios which means 1:1 is the lowest it goes. this isn't a motherboard limitation, its the chipset.

on a side note, the 'higher-end' version TP35D3-A7 Deluxe i have is pretty much a waste of time. i may just have a bad sample but this one has given me nothing but trouble. vCORE reverts back to default after a reboot 75% of the time, memory dividers not working, 440ish FSB limit (my CPU does 560 on every other motherboard with ease), memory clocking only to DDR1400 regardless of voltage and looser timings...such a mess. good to see the DDR2 version kickin some butt and taking names.

nice results on this budget board Pt1t :up:

i just swapped my DS3 out for the tests and put the biostar in my main rig, i was wondering is there any utilities programs or bios updates from biostar?

please post more pics of board and box ;)

nice oc ;)

Great runs there guys, but can anyone tell me what which BIOS easily passes 500fsb?

Quote:

---

Originally Posted by axemanrio

Great runs there guys, but can anyone tell me what which BIOS easily passes 500fsb?

---

initial and all others ;)

Great value board.....it really seems to be a nice companion for extreem benching. Congrats!

What bios version you are using, 521 mod bios?, where can i download it?

http://www.rebelshavenforum.com/sisu...;f=33;t=000142

there :)

thanks man!

I must say that this mobo is pretty good:up:
530-535 fsb orthos stable
http://shrani.si/f/a/k9/4riJwYDt/untitled3.png

540 fsb on air ( fsb wall on air for this CPU)
http://shrani.si/f/3w/Hl/2IfG7QTJ/untitled11.png

yes it is a pretty good board for the price. it will be going under ln2 hopefully in the next coming weeks if everything goes right. in the process of making a pot:).

Quote:

---

Originally Posted by Pt1t

Yes it is possible.

Fsb is also good on a Quad Core Watercooled

http://valid.x86-secret.com/show_oc.php?id=219713

http://valid.x86-secret.com/cache/219713.png

---

HOLY CRAP. 513FSB quad? Modded board? What's it do stock/stable? This may be the board I get for Yorkfield!

Quote:

---

Originally Posted by NickS

HOLY CRAP. 513FSB quad? Modded board? What's it do stock/stable? This may be the board I get for Yorkfield!

---

no , unmodded. And with this 3 power phase board.

Is there any way to flash bios without floopy? Im asking because i dont have any floopy drive on my PC? Maybe Winflash??? Thnx for the answers:)

Is there any way to flash bios with Award BIOS flashing utility?? Im still without floopy drive:(

I always said that Tforce boards are great clockers for great price. Well, this is no exception. Only shame that we have Biostar P35 budget board available locally, not Tforce.

Is it possible that cpu-z,bios and t-utillity hardware show me wrong CPU voltage, becouse when they show 1.52v i mesured 1.48 with multimeter? thnx for the answers

Quote:

---

Originally Posted by krompirusa

Is it possible that cpu-z,bios and t-utillity hardware show me wrong CPU voltage, becouse when they show 1.52v i mesured 1.48 with multimeter? thnx for the answers

---

Yes it is possbile. On a lot of mobo , it s beter to mesure it :D

I know that:up: And it was strange to me why my CPU is not stable 3.6ghz with 1.52v ( normali i need 1.49-1.5v), then i messured with multimeter and it was 1.47-1.48v . Now in windows i read 1.54v , with multimeter 1.49-1.5v and its rock stable 515x7 for 24/7 use.I like this mobo:up: .Btw my old ST ddr2 is overclocking great on this mobo.I try it in p5b-dlx, Commando, Quad gt, ip35-e and ip35pro and they never score 1200 mhz even in dreams.On this mobo they fly for the first time 1200mhz cas5:cool: .
http://shrani.si/f/12/Ml/cXDZeUy/memory1.png

Its really good mobo for the price she have:up: I bellive it can go up to 600+ fsb out of box:cool:

Some new results by me:

E6600@550FSB with air cooling
http://shrani.si/f/47/aJ/4ygyrQMD/550fsb.png
http://valid.x86-secret.com/show_oc.php?id=259138

540FSB spi32m stable
http://shrani.si/f/2X/10e/4FbNDkPf/540spirun1.png

4150Mhz@1.7v(real) CPU-Z validation
http://shrani.si/f/1A/DP/adpd8Gw/4150.png

http://valid.x86-secret.com/show_oc.php?id=259134

it changed my mind about Biostar brand.

i managed to reach 580ish fsb with E6600 under Cascade... anyway, anyone have the vdroop mod? on windows idle i got 1.79v on cpuz, e6600 on 4400mhz then i ran orthos priority 9 for 10mins, vcore drop to 1.712v.

Quote:

---

Originally Posted by 911us

it changed my mind about Biostar brand.

---

I hope that is on positive way:D

Im going to try it soon with my E6600 under DICE/LN2:up:

Did anybody try to run HDTach over 500 FSB speeds, becouse i haveing a problem there. If a set over 500FSB the avarage read and random access are really bad.Im useing bios 919.:eek: :confused:

http://shrani.si/f/1z/rv/2Hzd8X7q/didkic3.png

Any Wolfdale/Yorkfield user in this mobo?