Post your X2 revision F3 OC and stepping

Seeing there is a number of threads with nice Oc's, I thougt we could post our best clocks here.

Please post your stepping and type of cooling too!

Edit: Please post stabilitytest too if you can, so that we can see what is the max stable clock, wich is the really interesting part. :)

I'll start the show!

3575 Mhz on air (Zalman 9700LED)

ccb8f 0723spmw

http://valid.x86-secret.com/show_oc.php?id=217778

List:

MODEL | STEPPING | OC | VOLT | COOLING | NAME | STABLE @VOLT

X2 6400+ CCB8F 0722 TPMW 4222 1,55 H2O/pelt mAJORD ----3503 @1,5 Validation AMD CPU-Z WORLD RECORD!!
X2 6400+ CCB8F 0723 VPMW 4002 1,70 SS VictorWang Validation
X2 3800+ CCB8F 0736 GPMW 3993 1,7 SS dbloi
X2 6000+ CCB8F 0723 SPMW 3680 1,65 Air LIKMARK ---->3405 @1,456v Validation (1,35v)
X2 6000+ CCB8F 0721 UPMW 3654 1,575 Air Winterwind ---->3300 @1,425v Validation
X2 3800+ CCB8F 0715 MPMW 3600 1,6 Air eldera ---->3300 @1,40v EE Validation
X2 6000+ CCB8F 0720 XPMW 3550 1,58 Air gOtVoltage---->3550 @1,58v
X2 5600+ CCB8F 0720 XPMW 3548 1,55 H2O Serj_Over ---->3400 @1,425v
X2 6000+ CCB8F 0729 EPMW 3542 ?,?? H2O clon22
X2 6000+ CCB8F 0717 VPMW 3525 1,6 Air Psycho eddie ---->3250 @1,375v
X2 6000+ CCB8F 0731 FPMW 3510 1,56 Air Lightman ---->3510 @1,56v
X2 5600+ CCB8F 0711 WPMW 3505 1,53 Air msimax ---->3505 @ 1,53v
X2 3800+ CCB8F 0715 RPMW 3504 1,65 Air Sabuy-Sabuy EE
X2 6000+ CCB8F 0729 BPMW 3500 1,55 Air SOLDNER-MOFO64
X2 6400+ CCB8F 0731 FPMW 3433 1,45 h2o Cheffy
X2 5200+ CCB8F 0748 FPMW 3410 1,50 Air pablo NZ
X2 5600+ CCB8F 0711 TPMW 3400 1,61 Air gOtVoltage ---->3300 @1,56v Validation
X2 5200+ CCB8F 0721 TPMW 3400 1,39 Air Mad Man ---->3172 @1,39V EE
X2 5200+ CCB8F 0719 XPMW 3350 1,42 Air Quintero ---->3350 @1,42v EE Validation
X2 6000+ CCB8F 0718 XPMW 3300 1.38 Air Quintero ----> 3300 @1,38v
X2 6000+ CCB8F 0717 UPMW 3300 1.42 Air Quintero ----> 3300 @1,42v
X2 6000+ CCB8F 0719 RPMW 3300 1,425 Air cbjaust ----> 3204 @ 1,375 Validation
X2 5200+ CCB8F 0717 RPDW 3300 1,4 Air EniGmA1987 EE
????????? CCB8F 0717 UPMW 3290 ?,?? Air humeyboy
X2 6000+ CCB8F 0721 TPMW 3250 1,4 Air Optix ---->3250 @1,4v
X2 5600+ CCB8F 0711 WPMW 3240 1,425 Air uwackme
X2 3800+ CCB8F 0741 DPMW 3133 1,25 Air @meno

X2 6400+ ACB8F 0723 SPMW 4052 1,65 PHASE SuAsDu

X2 6000+ ACBVF 0651 VPMW 3705 ?,?? Phase Turrican ---->3625 @?,??v
X2 5200+ ACBVF 0651 WPMW 3532 1,8 Phase SuAsDu EE

SC 4000+ CCBVF 0703 MPMW 3532 1,55 ??? Ozzimark ---->3327 @1,55v Validation
X2 6000+ CCBVF 0704 TPMW 3405 1,55 H2O M411b ----> 3300 @1,55v
????????? CCBVF 0713 RPMW 3250 ?,?? Air humeyboye
X2 3800+ CCBVF 0706 VPMW 3200 1,49 Air lopri ----> 3000 @1,31v Validation

X2 5600+ CCBVF 0651 WPMW 3300 1,5 Air bernardmem
X2 3800+ CCBVF 0706 VPMW 3212 ?,?? Air en4cer
X2 3800+ CCBVF 0706 VPMW 3200 ?,?? H2O Jimmer411
SC 3800+ CCBVF 0705 TPMW 3200 1,45 Air p4spooky ---->3200 @1,45v

X2 3800+ CCB6F 0715 TPWM 3500 1,625 Air Neverine ----> 3100 @1,40v Validation
X2 6000+ CCB6F 0713 TPMW 3285 1,525 Air pslee ---->3285 @1,525
X2 5600+ CCB6F 0714 TPMW 3200 1,44 Air Lightman ---->3200 @1,44v
X2 5600+ CCB6F 0713 SPMW 3160 1,44 Air Quintero ---->3160 @1,44v Validation
X2 6000+ CCB6F 0713 TPMW 3300 1,52 Air ea6gka ---->3100 @1,42v


As of today, the CCB8F steppings is the ones you should hope for when you buy a revision F3 cpu

http://img405.imageshack.us/img405/5...abilwh7.th.jpg 4 GB Ram http://img254.imageshack.us/img254/6...abledc6.th.jpg 2 GB Ram

Stepping: CCBVF 0704RPMW

BEST: Ortho's stable for approx. 1.5hrs, and Boinc stable all night.
http://valid.x86-secret.com/show_oc?id=217867

Running now: 100% stable 1.55v.
http://valid.x86-secret.com/show_oc?id=217897

Not much but for the stepping and considering it wouldn't do 3.2ghz on the DFI, this is a feet.
SPECS ALL IN SIG: Fuzion, BIP II, 50Z
Load temp: 38*c on both cores
Idle temp: 29*c on both

Quote:

---

Originally Posted by [XC] M411b

Stepping: CCBVF 0704RPMW

BEST: Ortho's stable for approx. 1.5hrs, and Boinc stable all night.
http://valid.x86-secret.com/show_oc?id=217867

Running now: 100% stable 1.55v.
http://valid.x86-secret.com/show_oc?id=217897

Not much but for the stepping and considering it wouldn't do 3.2ghz on the DFI, this is a feet.
SPECS ALL IN SIG: Fuzion, BIP II, 50Z
Load temp: 38*c on both cores
Idle temp: 29*c on both

---

Why is your HT Link so low...doesn't that affect your gaming?

Don't think you'll notice the effect of low/high HT link in anything but benchmarks

So I could lower mine from ~900 to ~600 and not see a difference in Gaming?

Yes, but why would you? It's recommended to keep it as close to 1000 as possible as far as I know. (bandwidth related)


Edit: BTW post your oc and stepping!

Because it would help stability?

Quote:

---

Originally Posted by Stealthmang

Because it would help stability?

---

if your board can't run 1000mhz ht, there is something wrong with it

can we extend this thread to include all F3's? :D

Quote:

---

Originally Posted by ozzimark

can we extend this thread to include all F3's? :D

---

Agreed!! Steppings and results, Steppings and results, Steppings and results.

My 5600+ F3 is: CCB8F 0711WPMW

Basic HSF is keeping me below 3.5Ghz @ 100% stable. That will end the day the Ultra120 Extreme arrives. Ill use the JingTing on the chip with the 10K rpm fan on it too. Im going to move the X1900 to the lower PCIe slot as well to improve airflow. Adding sinks to the mosfets, PWN and Vdimm controller as well.

Going to be lapping the 5600/U120, as popping the IHS off is just too much hassle.

Quote:

---

Originally Posted by ozzimark

can we extend this thread to include all F3's? :D

---

Of course! I'll even update my first post and make a list:)
And I'll snoop around the other threads for info.

Ok! This is my A64 X2 5600+, CCB6F 0714TPMW, Zalman 9500LED, MSI K9N, for rest of info look @ my sig.

3200MHz@1.44V
http://www.xtremesystems.org/forums/...6&d=1184099842


This is 24/7 stable OC but for more I need better cooling, PSU and mobo. I'm pretty sure I can do 3.3GHz stable because this is freq I can boot into Windows without problems, but after short warm up, when one of cores is at 62C or above I'm getting restarts or Orthos errors. My vcore is fluctuating +/-0.07V!!

Otherwise I'm very happy :)

CCB6F 0713 TPMW (it's a b6f, sigh)
x6000
3.27GHZ 1.55v aircool with zalman 9500
m2n sli deluxe

2485 cpu score on 3dmark06.

what are your 3dmark06 cpu scores?

5600+ X2 (CCB6F) @ 3220 @ 1,35V @ Infinty
ASUS M2N32 WS PRO


MB is limiting.

Quote:

---

Originally Posted by spainis

5600+ X2 @ 3220 @ 1,35V @ Infinty
ASUS M2N32 WS PRO

---

Do you know your stepping?

@pslee: I'm getting about 2550 3Dmark cpuscore

I have an x5200+ X2 @ 3.532Ghz on Phase.

http://valid.x86-secret.com/show_oc.php?id=218320

I will get stepping info later tonight. I forgot what voltage it was.. I was so frustrated w/ the cold bug :P I was up to like 1.8v try to beat the cold bug, but no luck.. I need to tweak a little more to see what I can do.

SAD aka TiTON

Thats a nice clock SuAsDu, bring on the stepping.

*still testing*

AD038001AA5CZ
CCBVF 0706 VPMW
350 "N"

For the last few months it's been all Brisbane for me. lol I ordered the F3 last week and was hoping to receive it Friday, but as usual ups took it's time.

I've only had 9.5x to play with so 10x feels kinda weird. default vcore 1.2v


man this chip is going to be fun :D 1.375 in bios

need a new bios on TF570 Air stock cooler

http://img524.imageshack.us/img524/8697/f3dw2.th.jpg


edit update with better timings

http://img236.imageshack.us/img236/7866/cpuhm0.th.jpg

Great clocks folks. Bring'em on!!

Here is the stepping from my chip above:

x2 5200+ ACBVF 0651 WPMW

SAD

X2 3800+ 65W

CCBVF 0706 VPMW

So far so good :D

http://valid.x86-secret.com/show_oc.php?id=219317

Quote:

---

Originally Posted by en4cer

X2 3800+ 65W

CCBVF 0706 VPMW

So far so good :D

http://valid.x86-secret.com/show_oc.php?id=219317

---

Very sweet X2 3800+ you got there :cool:

Quote:

---

Originally Posted by en4cer

X2 3800+ 65W

CCBVF 0706 VPMW

So far so good :D

http://valid.x86-secret.com/show_oc.php?id=219317

---

WOW! A dream come true for every X2 3800+ owner :D .

Can we get more details of setup like voltages, temps, etc... is it bench stable?

How about posting where the F3 processor was purchased, as well?

It would be helpful, to the rest of us, to know who's shipping what.

Quote:

---

Originally Posted by Reefa_Madness

How about posting where the F3 processor was purchased, as well?

It would be helpful, to the rest of us, to know who's shipping what.

---

I'm not sure about en4cer (same stepping) mine shipped from Newegg, NJ.

Quote:

---

Originally Posted by JAWS

I'm not sure about en4cer (same stepping) mine shipped from Newegg, NJ.

---

Thanks,

I think that I'll try my luck with one of those from the egg.

I live in the East Coast, so most of my stuff is shipped from either NJ or TN.

Quote:

---

Originally Posted by Reefa_Madness

Thanks,

I think that I'll try my luck with one of those from the egg.

I live in the East Coast, so most of my stuff is shipped from either NJ or TN.

---

cool! yeah I'm just south of you :D I would try one!

my chip has huge potential, it's just held back by mobo. Hopefully Biostar builds another bios ;)

Quote:

---

Originally Posted by JAWS

I'm not sure about en4cer (same stepping) mine shipped from Newegg, NJ.

---

Yea, mine shipped from the egg on 7/13 from NJ ;) So far 3.2 @1.45v seems to be about it's max but I'm trying for more :D

Thanks...I placed an order from the egg earlier today. Should arrive Tuesday.

Quote:

---

Originally Posted by Reefa_Madness

Thanks...I placed an order from the egg earlier today. Should arrive Tuesday.

---

You won't be disappointed :D

The list is updated. My X2 3800+ rev F2 stopped at 2500Mhz, quite something else with your F3's:)

Anyone compare the overclocking of one of the low power Opterons (1218 HE Santa Ana for example) to the X2 6000+? I know the X2 5000+ - X2 6000+ are much more popular because of the excellent overclocking for the price but I'm kinda curious about the low voltage AM2 Opterons. I'll try it out when I have the money.

ADO3800IAA5CZ

CCB8F 0715MPMW

TUNIQ TOWER120-LFB

1.45v 3300Mhz OC stable

1.60v 3600Mhz OC limiting

http://valid.x86-secret.com/show_oc.php?id=220065

Quote:

---

Originally Posted by eldera

ADO3800IAA5CZ

CCB8F 0715MPMW

TUNIQ TOWER120-LFB

1.45v 3300Mhz OC stable

1.60v 3600Mhz OC limiting

http://valid.x86-secret.com/show_oc.php?id=220065

---

You're joking!! :eek2:
3600MHz (3.6GHz) from X2 3800+!!On air!!!!! :shock2:
This is wonderful WR! :up:
Congratz!! :party3: :cheer: :guitar: :party2: :bounces: :bday2:

BTW one hell of a bargain! :cool:

Quote:

---

Originally Posted by eldera

ADO3800IAA5CZ

CCB8F 0715MPMW

TUNIQ TOWER120-LFB

1.45v 3300Mhz OC stable

1.60v 3600Mhz OC limiting

http://valid.x86-secret.com/show_oc.php?id=220065

---

Dannnng!!!

:up: nice job can you post some mem benches

Quote:

---

Originally Posted by en4cer

X2 3800+ 65W

CCBVF 0706 VPMW

So far so good :D

http://valid.x86-secret.com/show_oc.php?id=219317

---

i just realized that chip is 65 bucks thats sick :shocked:

Quote:

---

Originally Posted by eldera

ADO3800IAA5CZ

CCB8F 0715MPMW

TUNIQ TOWER120-LFB

1.45v 3300Mhz OC stable

1.60v 3600Mhz OC limiting

http://valid.x86-secret.com/show_oc.php?id=220065

---

very nice!! what Jetway mobo is that?

I was able to find a little more. stock TF570-SLI, stock h/s, anmd florida air ;) 570 didn't like the ballistix, so I changed to 5400ul. seems to work better

http://img300.imageshack.us/img300/8...tledhs2.th.jpg





edit update with better timings

http://img236.imageshack.us/img236/7866/cpuhm0.th.jpg

Quote:

---

Originally Posted by JAWS

very nice!! what Jetway mobo is that?

I was able to find a little more. stock TF570-SLI, stock h/s, anmd florida air ;) 570 didn't like the ballistix, so I changed to 5400ul. seems to work better

http://img300.imageshack.us/img300/8...tledhs2.th.jpg

---

I'm using crucial 10th, it seems to work well on my jetway mobo :)

OC 1380Mhz cpuz Valid:
http://valid.x86-secret.com/show_oc.php?id=218885

My Jetway mobo & Crucial 10th:
http://www.speedtime.cn/bbs/attachme...aylOOW6PFD.jpg

wow :) :)

Ooops! eldera somebody stolen your chipset heatsink! :D

How you can post on top of your X2 3800+ sick OC this stupidly highly clocked memory results?? This is unfair!! :D

Awsome results eldera, I envy your 10th anni ram. You got a lot for your money...

I assume that the Jetway HA01 isnt available
in the US? Is there anyplace that ships to the
US? I've seen a lot of high clocks off that board.
In another thread someone mentioned that the
board is around $80 USD.

Gridirongoose

Quote:

---

Originally Posted by gridirongoose

I assume that the Jetway HA01 isnt available
in the US?

---

yep, i have look high and low for that board in the us and have not been able to find it:(

another more, pi 1m result of my x2 3800+ cz :)

http://desfilms.googlepages.com/23_765.jpg


cpuz valid link:
http://valid.x86-secret.com/show_oc.php?id=220518

Ahh bollocks :mad: this is just unfair!

For what its worth, this is what I received today.

X2 3800+ CCBVF 0707 VPMW

It was shipped to me from the egg's TN (not NJ) w/h. Waiting on a mobo to arrive, but will post results first chance I get. Stepping is the same as JAWS and en4cer, except mine is week 07 and theirs is week 06. Hope I do as well as they have done.

Quote:

---

Originally Posted by Reefa_Madness

For what its worth, this is what I received today.

X2 3800+ CCBVF 0707 VPMW

It was shipped to me from the egg's TN (not NJ) w/h. Waiting on a mobo to arrive, but will post results first chance I get. Stepping is the same as JAWS and en4cer, except mine is week 07 and theirs is week 06. Hope I do as well as they have done.

---

cool as soon as you receive your mobo....post some results. I ordered another power supply elimating a few unstable attempts @ 3300MHz.

it was either ps or mobo bios holding me back. I can upload 3.3GHz, but not completely stable.


edit I've looked high and low for that Jetway mobo. I almost bought the Jetway 690g at newegg. maybe it's a diamond in the rough mobo....:D

edit small update...oppps avg running ;)

http://img530.imageshack.us/img530/9710/cpu3nd2.th.jpg

what kind of stability are we talking here...
the cpu:
http://www.eclipseoc.com/image/cpu/a...0/DSCF6167.jpg

both with 1.55v set in the bios...

best suicide - 3532mhz
http://valid.x86-secret.com/show_oc.php?id=177921

SP2004 stable - 3327mhz
http://www.eclipseoc.com/image/cpu/a64_4000/6hr.png

X2 3800+ CCBVF 0706 VPMW


3200 on water, not maxed yet.

Quote:

---

Originally Posted by eldera

ADO3800IAA5CZ

CCB8F 0715MPMW

TUNIQ TOWER120-LFB

1.45v 3300Mhz OC stable

1.60v 3600Mhz OC limiting

http://valid.x86-secret.com/show_oc.php?id=220065

---

Hey ive found with F3's thier memory controler likes TRC set to 23-24 .....for 4-4-4-6 timing ... they dont like 25-26,has to be 23-24 to get the low TRAS while heavily overclocking the mem.


Could mean 1s off that superPi possibly:up: ....My Patriot would only do 888mhz till i raised the TRC up . Ive tried 23 and 24 with same result. It allowed me to run my 5600+ @3.3ghz with 4-4-4-6@1000mhz on my Patriot 6400ELK @stock2.2v and my 6000+@3.51ghz with 4-4-4-6 @988mhz@2.2v all four sticks of 512!

Note: i just installed Water about a week ago and see 22c idle @ 22c room temp on my 6000+ @1.58vcore and also shaved my IHS to 4/64ths of an inch .I then applied a high polished lap job on IHS and my ApogeeGt, Waiting for a BlackIceGTS360 Radiator from SVC to add to my MCR120 and MCR220,The As5 is almost @165 hours of use .When i hit 200hours then i will shall see how far i can go past 3.51ghz.I am going slow so i can see every lil change in my system . I could progress faster but after ruining a 5600+IHS removing it:gay: i am taking my time for now on:yepp:

I forgot to write down the stepping, but I will open up the comp and edit this post with it in later.

X2 5200+, CCB8F 0717RPDW
3.3GHz w/ 1.4v on stock cooler
max temp is 62c, idles at 35.


Does that seem normal or is it good?

Quote:

---

Originally Posted by EniGmA1987

I forgot to write down the stepping, but I will open up the comp and edit this post with it in later.

X2 5200+, (will edit in stepping soon)
3.3GHz w/ 1.4v on stock cooler
max temp is 62c, idles at 35.


Does that seem normal or is it good?

---

Seems real good with stock:up: !!!!!If your gonna buy a performance heatsink Pick up a (Thermalright Extream 120) Lap the heatsink with 600 then 800grit until smooth ,it dosnt have to be shinny and sand using no water .Clean it with ketchup or alchohal then use a Dot of paste the size of BB in center of IHS ,gently install heatsink and then give it a lil 1-2degree twist left and right to seat if you are not going to LAP IHS! . Then go for 3.5ghz:D With the best Aircooling you can achieve 1.58-1.61-v Core stable with no real worries.@3.3ghz and up it takes about .1Vcore for every 75-100Mhz more you want to sqeeze ,provided it stays cool and your stepping is willing! my 5600+@3.3ghz 1.56Vcore and also ran @3.4ghz@1.61 Vcore AIR!

my 5600+stepping was CCB8F-0711TPMW.......

http://www.svc.com/ultra-120-extreme.html

Quote:

---

Originally Posted by EniGmA1987

I forgot to write down the stepping, but I will open up the comp and edit this post with it in later.

X2 5200+, CCB8F 0717RPDW
3.3GHz w/ 1.4v on stock cooler
max temp is 62c, idles at 35.


Does that seem normal or is it good?

---

You should be very happy with that chip. Quite high load temps though..


The list in the first post is updated:)

Same processor as before but I changed it cause I just didnt like the temps on it. This is what I am doing now. Not a really high OC, but thought people looking for average OC info on the new F3 mgiht be interested.


X2 5200+, CCB8F 0717RPDW
2.75GHz w/ 1.18v
max temp is 46c, idles at 31.


Processor was bought on 07-23-07 from newegg.

Quote:

---

Originally Posted by EniGmA1987

Same processor as before but I changed it cause I just didnt like the temps on it. This is what I am doing now. Not a really high OC, but thought people looking for average OC info on the new F3 mgiht be interested.


X2 5200+, CCB8F 0717RPDW
2.75GHz w/ 1.18v
max temp is 46c, idles at 31.


Processor was bought on 07-23-07 from newegg.

---

WOW! This is amazing! 1.18V and 2.75GHz!! :shocked:

I WANT CCB8F! :D

Hopefully my next X2 will do better :( But I think a database like this should include both good and bad steppings...

X2 5600 CCB6F 0713SPMW
3.16 GHz @ 1.44 vCore (stable)
TR XP-90
48 C load

I won't bother to find the highest "screenshot stable" speed. That's a waste of time, IMHO ;)

http://valid.x86-secret.com/show_oc.php?id=222926

Hi there Quintero. Your next X2 being a Phenom then or having issues with your patience:) (like most of us)

Man I love your ram settings!

All steppings should be included as you say. Suicide runs is a waste of time, but it's a fun waste of time:)

Quote:

---

Originally Posted by Lightman

WOW! This is amazing! 1.18V and 2.75GHz!! :shocked:

I WANT CCB8F! :D

---

yeah, that is pretty damn good, but about what my 4000+ can do, and i suspect most of the other F3's. they're insane at low voltage, takes me just 1.225v for 3.0ghz. scaling at higher voltage is beyond sad in comparison though

http://www.eclipseoc.com/image/cpu/a64_4000/vs.png

my 6000+ ACBVF 0651VPMW

max. with phase change
http://valid.x86-secret.com/show_oc.php?id=220480

more isn't possible because of the "coldbug".:mad:
maybe with watercooling...

24/7 stable ~3625Mhz

Quote:

---

Originally Posted by Turrican

my 6000+ ACBVF 0651VPMW

max. with phase change
http://valid.x86-secret.com/show_oc.php?id=220480

more isn't possible because of the "coldbug".:mad:
maybe with watercooling...

24/7 stable ~3625Mhz

---

3.6 ghz 24/7 is awesome for A64 :toast:

this is what I do: load both cores with something. temp goes up and you avoid the coldbug.

http://www.benchmarkhq.ru/gallery/ma...serialNumber=2

click on image to download

I run WCG and burnmax on low priority constantly.

Quote:

---

Originally Posted by Lightman

WOW! This is amazing! 1.18V and 2.75GHz!! :shocked:

---

Keep in mind that the X2 5200+ F3 is an Energy Efficient model with a TDP of 65W. Its stock vCore is 1.20 - 1.25 at 2.6 GHz. Please don't take this the wrong way, but I'm not sure if that result should be considered amazing. But who knows how high it clocks at 1.5v...

Quote:

---

Originally Posted by LIKMARK

Your next X2 being a Phenom then or having issues with your patience:) (like most of us)

---

Guess I'll get another K8 X2 for my HTPC. Don't think I can wait for Phenom, and I usually steer clear of the first batch anyway.

Quote:

---

Originally Posted by LIKMARK

Man I love your ram settings!

---

I've been trying to balance it a bit. I want my sticks to last, so I only use safe voltages. 2.2 v should be perfectly ok, and I've only increased two of the drive strengths to 1.25.

Quote:

---

Originally Posted by ozzimark

yeah, that is pretty damn good, but about what my 4000+ can do

---

There is a difference between single and dual, you know ;)

No, its stock speed is 2.4GHz. Newegg has it listed wrong. a 5600+ has a stock of 2.6

Quote:

---

Originally Posted by EniGmA1987

a 5600+ has a stock of 2.6

---

You are wrong here ,the 5600+ has a stock frequency of 2800Mhz(and it is F3 stepp. and CZ in part number(PIB) )
http://www.amdcompare.com/us-en/desk...=ADA5600IAA6CZ

Processor AMD Athlon™ 64 X2 Dual-Core
Model 5600+
Ordering P/N (Tray) ADA5600IAA6CZ
Ordering P/N (PIB) ADA5600CZBOX
Operating Mode 32/64
Stepping F3
Frequency 2800Mhz
HT Speed 2000
Voltage 1.30-1.35V
Max Temp 55-70°C
Thermal Power 89W
L1 Cache 128KB
L2 Cache 1MB x2
CMOS Technology 90nm SOI
Socket Socket AM2

Hmm after looking at that page it does say the stock is 2.6 for the 5200, and yet the processors max multi according to the board is x12 which is a max of 2400MHz. Very strange...


Edit:
Well since you are right in that a 150MHz OC on a little less than stock volts is not that impressive, here is a shot of it running at 3GHz on less than stock volts. The processor DOES have a max multi of 12 (mine does at least) so technically mine is a 2.4GHz processor. So you can either call this a 600MHz overclock on less than stock voltage, or a 400MHz OC. Take your pick. CPU-Z reads the voltage as 1.184, motherboard says 1.180
http://www.clantoolz.com/majestic7/f...GmA/3GHzOC.jpg

And yes it is completely stable. I can run dual prime for 24 hours without any errors and 32M SuperPi

What board are you talking about?No way that a max multi for a (supported by BIOS) 5200+ is 12x,it must be 13x.If it is 12x,than the BIOS is not supporting the CPU correctly.

I am on a Biostar TF560 A2+ board, and it is only giving me a x12 max CPU multiplier. Ill try and get a picture of the bios later today when I see a friend of mine who has a SD to USB adapter I can use to get a pic off my phone onto my comp.

Try updating the BIOS.On the other hand you got "for free" a 3Ghz on stock volts,so maybe there is no point in reflashing the mobo...
Nice CPU,a lot of power there.

Quote:

---

Originally Posted by Quintero

Keep in mind that the X2 5200+ F3 is an Energy Efficient model with a TDP of 65W. Its stock vCore is 1.20 - 1.25 at 2.6 GHz. Please don't take this the wrong way, but I'm not sure if that result should be considered amazing. But who knows how high it clocks at 1.5v...
.....

---

:p:
Right 2.75GHz @1.18V isn't hard, I tried this with mine F3, but 3.0GHz at same voltage is a no go on my 5600+.
So his 5200+ is still short of amazing compared to other F3 revisions and simply amazing compared to older F2 cores :) .

@ozzimark
Great scaling graph! :up:
Did you do it yourself?

Quote:

---

Originally Posted by EniGmA1987

Well since you are right in that a 150MHz OC on a little less than stock volts is not that impressive, here is a shot of it running at 3GHz on less than stock volts.

---

Now we're talking! :up:

Quote:

---

Originally Posted by biohead

3.6 ghz 24/7 is awesome for A64 :toast:

this is what I do: load both cores with something. temp goes up and you avoid the coldbug.

http://www.benchmarkhq.ru/gallery/ma...serialNumber=2

click on image to download

I run WCG and burnmax on low priority constantly.

---

thanks, i'll give it a try :toast:

looking forward to see your result Turrican

Quote:

---

Originally Posted by Quintero

There is a difference between single and dual, you know ;)

---

i would agree if my single core didn't clock identically to all the duals. they're all using the same base core anyway... dual core with 2x1mb L2. mine just has some stuff sitting disabled on the die. it's still there :p:

Quote:

---

Originally Posted by Lightman

@ozzimark
Great scaling graph! :up:
Did you do it yourself?

---

thanks man. i did indeed. i love graphical interpretations of data, makes things so much easier to see ;)

Quote:

---

Originally Posted by ozzimark

i would agree if my single core didn't clock identically to all the duals. they're all using the same base core anyway... dual core with 2x1mb L2. mine just has some stuff sitting disabled on the die. it's still there :p:

---

It's still two cores to fail against one core to fail, the poorest clocker of them will ruin your oc even if the other core is WR material..

Quote:

---

Originally Posted by ozzimark

i would agree if my single core didn't clock identically to all the duals. they're all using the same base core anyway... dual core with 2x1mb L2. mine just has some stuff sitting disabled on the die. it's still there :p:

---

Two cores generate more heat, and draw more power, thus putting more stress on the mobo. And like LIKMARK said, a dual CPU is limited by the worst core. A singlecore CPU is easier to overclock.

Yay! My new CPU is quite a bit better :cool:


X2 5200+ EE
CCB8F 0719 XPMW
TR XP-90
3.35 GHz, 1.42v (stable)

I think it's safe to call it stable, because I used higher voltage on my 5600+. One hour isn't quite enough, but I did some more CPU-intensive testing, with no errors.

1.40v 3.3G

orthos large 9 level 1 hour pass...

:D

http://elderahans.googlepages.com/330X10.JPG

Who, in the US, is shipping these CCB8F processors right now...it doesn't seem to matter if it is a 3800 or a 6000...they sure seem to be the cream of the crop!

@ LIKMARK

May I suggest that you change the list such that it distincts between "screenshot stable" and *stable* ?

So long as there are no criteria for stability, the list could make two very different steppings look more or less the same. I think it would be better if the list would somehow reveal each entry's degree of stability. That way one wouldn't have to study several screenshots before deciding which stepping to go with ;)

Yeah I'm working on it, the list aint telling us much at the moment. Anyone got any ideas on what should be called stable? Hardcore 24 hours Orthos stable or something not that timeconsuming? My system for once don't need server grade stability, so I'm happy with two hours Orthos at priority 8. Any thougths anyone?

Edit: There it's updated with the stable clocks I've found in this thread.

Just put an extra section in the table for stability level.

1hour+ (i.e no fail) is fine with me, if it's 1hour stable, it's close to 24hr stable, which is fine if it's stated as such.

I'm not arsing around testing for 24hrs on every chip :) take 50mhz off a 1hr stable result to get an idea of the 24/7 stability of the overclock.

obviously if people are testing for their final overclock and want to post 24hr that's great, i'll do the same occasionally

a while back I had orthos fail on me after 4 hrs with priority 9, that was when I thought, with such high priority, 1 hour would suffice. That's why I think you can lable a system "completely stable" after ~6 hours of orthos blend test.

Adding to the table a list of how each overclock was tested for stability (or not at all) would definitely make it more valueble.

AMD Athlon64 X2 6000+ @ 3300MHz / 1.425v(bios)
DFI Infinity NF570 SLI-M2/G
2 x 1024MB A-Data PC2-8500 Extreme Edition

http://img129.imagevenue.com/loc414/..._122_414lo.JPG

CCB8F 0721UPMW

Max so far ~ 3400mhz with Arctic Cooling Freezer64 PRO

Superpi 1M: 24.688sec
http://img102.imagevenue.com/loc1155...122_1155lo.JPG

CCB6F 0713 TPMW 3285 1.525 Air pslee stable. No matter what I do, I cant get it to 3.300ghz.

Quote:

---

Originally Posted by pslee

CCB6F 0713 TPMW 3285 1.525 Air pslee stable. No matter what I do, I cant get it to 3.300ghz.

---

...but on the bright side, that's very good for a CCB6F ;)

mine does 3300 with 1.52 too

Guys, do you think these new F3's 5600's can do 3.0GHZ on stock vcore. My current Dell E521 has a Brisbane 4400 that can do 2.7GHZ stable on stock vcore. I really want a 5600 due to the 1meg cache and the potential to have a 3GHZ chip in my cheap ass dell should give it a nice boost.

Quote:

---

Originally Posted by vengance_01

Guys, do you think these new F3's 5600's can do 3.0GHZ on stock vcore. My current Dell E521 has a Brisbane 4400 that can do 2.7GHZ stable on stock vcore. I really want a 5600 due to the 1meg cache and the potential to have a 3GHZ chip in my cheap ass dell should give it a nice boost.

---

If you're lucky you'll get a CCB8F and it'll do beyond 3.0 GHz :)

Quote:

---

Originally Posted by ea6gka

mine does 3300 with 1.52 too

---

Do you have your stepping?

Quote:

---

Originally Posted by vengance_01

Guys, do you think these new F3's 5600's can do 3.0GHZ on stock vcore. My current Dell E521 has a Brisbane 4400 that can do 2.7GHZ stable on stock vcore. I really want a 5600 due to the 1meg cache and the potential to have a 3GHZ chip in my cheap ass dell should give it a nice boost.

---

You have to be unlucky if you don't get a X2 5600+ up to 3000Mhz ++:)

Hi Guys,
The problem is not hitting the 3Gig mark but the temp that comes with it, when the cpu is running at full load. Basically one should get a mobo that will be able to manage the stress. Well i run my rig at 2.8mhz AMD 64 X2 4600 E6 2400mhz@2800mhz. Meanwhile with Vista prefomance test shows no increase in system prefomance from 2.8gig bis 3.0gig, but there is a hell lot of temp. difference between the two marks.

Quote:

---

Originally Posted by LIKMARK

Do you have your stepping?



You have to be unlucky if you don't get a X2 5600+ up to 3000Mhz ++:)

---

but on stock vcore?

Quote:

---

Originally Posted by vengance_01

but on stock vcore?

---

Not sure there, but I think you can oc at least a bit on stock vcore

Quote:

---

Originally Posted by LIKMARK

Do you have your stepping?

---

CCB6F 0713 TPMW

i am currently 24/7 rock stable at 3100 1.42V. 3200 needs 1.47-1.48 but i live in greece and summer temps are high so...

Deleted post.

Quote:

---

Originally Posted by ea6gka

CCB6F 0713 TPMW

i am currently 24/7 rock stable at 3100 1.42V. 3200 needs 1.47-1.48 but i live in greece and summer temps are high so...

---

I could get mine over 3.300 ghz, but it is not stable (temperature issues) to run 3dmark06. I get blue screen of death in the second cpu test section. Otherwise it runs fine but I do care about my cpu's life expectancy. I run my cpu stock at 3 ghz but I oc whenever I do benchmarks.

i am sure you will get rid of your cpu before the standard 3 year warranty expires :D

quads ftw :D

Quote:

---

Originally Posted by ea6gka

i am sure you will get rid of your cpu before the standard 3 year warranty expires :D

quads ftw :D

---

yea. i am waiting for phenom x4. I read the article that is on the amd website about phenom and I am just blazed. they told exactly what I wanted to hear. Intel is just putting two dual cores in one chip due to the fact they have an advantage over amd that they have 65 nanometers earlier. They said it is not a true quad core, but double dual core!

Quote:

---

Originally Posted by eldera

ADO3800IAA5CZ

CCB8F 0715MPMW

TUNIQ TOWER120-LFB

1.45v 3300Mhz OC stable

1.60v 3600Mhz OC limiting

http://valid.x86-secret.com/show_oc.php?id=220065

---

:D HA01

I've been testing two 6000+ CCB8Fs for a friend. I'll probably end up buying one of them.

After a few hours of testing, I've found that none of them match my 5200+ EE (same stepping) at 1.4v. But the 6000s are superior at low voltage, which was mildly surprising to me.


X2 6000+
CCB8F 0717 UPMW
3.3 GHz @ 1.42v (stable)

X2 6000+
CCB8F 0718 XPMW
3.3 GHz @ 1.38v (stable)


I might update the results should further testing reveal any noteworthy gains. As you can see, I didn't try to max them out, but I prefer to settle at +/- 1.4v. Didn't bother to take any screenshots so far, but I hope you'll take my word on it. These results aren't even close to spectacular, so why would I lie about this? :p: