my first DOD by bulledeaux :-)

hello has all :hello:

then veiled I have decider to be made a DOD :D


the matos to use:

- gas: R507

- a compressor danfoss NL 11 F

http://img521.imageshack.us/img521/9726/21670qn1.jpg

- valves schrader

http://img501.imageshack.us/img501/734/33920ov5.jpg

- line of suction of 1 m

http://img201.imageshack.us/img201/8899/evap11be9.jpg

- evapo to buy in kit, remains right A to make the welding :)

http://img530.imageshack.us/img530/9782/21010ay4.jpg

- fixing of evapo has the Motherboard

http://img201.imageshack.us/img201/452/21020yf6.jpg

- 2 X condenser ND50F 120mm

http://img519.imageshack.us/img519/4016/19931yw8.jpg

- deshydrator of 15 G

http://img521.imageshack.us/img521/4015/29050sg1.jpg

- copper pipe: 1 m in 8 mm

http://img253.imageshack.us/img253/9321/92hx6.jpg

- capillary of 2.10 m in 0.8mm

http://img519.imageshack.us/img519/2738/20660lg8.jpg

- transformer 230/12v for the ventilos

- switch and taken 230v recupere on a alim has 10 euros :lol:

- two ventilator PAPST: Ventilator 120mm - 4412F/2GLL (it is not most powerful but it do not make noise :up: )

- a ventilator luminous blue :wierd:

- case for my dod makes to measure out of aluminum enamel black shining 30 euros :D (I am to go in one limps of folding with a plan of which I wanted) dimensions: 220 mm X 220 mm X 500 mm

wholesale Ca will give Ca:

http://img184.imageshack.us/img184/2...dadavidqa8.png

PHOTOGRAPHS will be soon poster :bounce:

Looks like your ready to get busy:D

and veiled ;)

http://img507.imageshack.us/img507/5223/picture2ac5.jpg

http://img505.imageshack.us/img505/7...cture16xi3.jpg

http://img505.imageshack.us/img505/2...cture14ou1.jpg

http://img228.imageshack.us/img228/2078/picture3ks5.jpg

I made the decoupes has 45° to fold has 90°
holes for the ventilos in hardly 30 minutes
veiled finished case
it remains to me has to put a thermometer in frontage and feet reglable :surf:

The case came out very clean. Did you made it yourself?

yes with my tools :D

http://img441.imageshack.us/img441/6...cture17mw1.jpg

great work bulledeaux :up:

I love the case.

this week I should resevoir the materiel to order has cold ice :D
and thus I could manufacture all the interior :toast:
for my QX6700:lsfight:

thank you very much runmc and n00b 0f l337 :bows:

That case looks really nice. What material is it made from?

Quote:

---

Originally Posted by Brettbeck

That case looks really nice. What material is it made from?

---

my case is out of aluminum :)
from 1 mm thickness

Great work bubulle, hope to see this DOD in live soon!!! :up:

thank culex :toast:
it is for soon :explode:

:ROTF: :ROTF: :ROTF:

Hey dude,

This is looking really sweet, nice and clean and very simple. I like.

Love the case. You say it cost only 30 euro to make the case or just for the material?

Your English is good too. Duno if it was just me but as i read it i felt like i was French, heheh

the fan grills go well with the case

30 euros it is for the plates of black aluminum larquer and without the the fan grills :D

Look up anodizing, it is easier then most seem to think, it is a skill that must be learned by doing, more so then by reading. but reading will greatly speed your learning of the skill! So do both for good success!

This will give you such incredible freedom of colors that will be protected from scratching, and, rotting as aluminium can do over time when in a moist environment.

Nice DOD! When do you plan to have it up and running?

very nice case :up:

you did it?

Quote:

---

Originally Posted by Eightballrj

Nice DOD! When do you plan to have it up and running?

---

thank you, and I will finish it when cold ice delivers the remainder of the materiel to me :D

Quote:

---

Originally Posted by PPInDaHouse

very nice case :up:

you did it?

---

yes it is me which board made the case ;)

really nice SS :up:

it is good :)
I received parties of the matos :up:
thank you cold ice ;)

http://img516.imageshack.us/img516/5...cture27hr2.jpg

Thats goin to be a beautiful DOD :up: Looking forward for the temps !

Case is very sweet ;)

The adventure begins! Have fun and be safe.

hello all the world :wave:

http://img502.imageshack.us/img502/3...cture29kq5.jpg

http://img111.imageshack.us/img111/3...cture30gj2.jpg

http://img457.imageshack.us/img457/9...cture31fb0.jpg

http://img98.imageshack.us/img98/8167/picture32ya6.jpg

http://img442.imageshack.us/img442/3...cture33bm7.jpg

http://img258.imageshack.us/img258/5...cture34re5.jpg

it remains me more than has ponser and to recut has the good length :D

and veiled :)
my evapo is to weld :up:

http://img527.imageshack.us/img527/3...cture35bl6.jpg

did you purge while brazing evap? if not you have some serious problem with cleaning.

not, I do not have to purge my evapo :D
but the pipe of 10 mm is not yet to weld and I have verifier that the capi is not to stop :up:

hello all the world ;)

I made a small modification :D

http://img507.imageshack.us/img507/5...cture37uh0.jpg

i think it will be better to change condensor order, the last condensor must be the one that haves the fresh air, this way you can get the last pipe of condensor before dryer more fresh that the way you have.

becouse the air that cool the last condensor are hot becouse it has already cooled the first condensor :S

sorry my english i wish you understand my words.

:toast:

hello riky :)
I have prevu to put two ventilator for my condenser
thus I think that its should turn well ;)

My DOD is now completed :)

http://img509.imageshack.us/img509/3...cture13zv6.jpg

:cord: :rofl:

Translated by Patriote.

Thanks for his English LOL ;)

LOL No problem my French friend :)

BTW: It does look pretty good! :p: Now let's see how it performs!

looks real nice, and clean. have you started it yet?

Clean unit :)

I like it. I wish I had some case building skills like the couple I have seen lately. Now lets see some temps. :up:

Nice work. You talk a little backwards tho.:D

looks very very nice :toast: