The Official Brisbane Overclocking Thread

As the other threads about the AMD cores, I made another for the brisbane core (65nm) so we can avoid unnecessary threads and make all results from all in one same place.


RULES

Overclocking results must include at least one screenshot with machinespec (cooling, temps, motherboard etc), like CPU-Z and the example below, assume from this

- Stepping and/or CPU Assembly Date
- VCORE
- Method of Cooling
- Temperatures (Software-based or Meter-derived)
- Specifications of System
- Stability Tests (SuperPi, Prime95, 3DMark, etc.)

Here you can see some results from other brisbanes

Only post results and hold the discussions in the PM's

Notice that the DTS is broken in the brisbane's!

My own results for the moment, just got stockcooling and waiting for my Thermalright Ultra-120 Extreme,

Stockcooling, 1.55v vcore ~75c :flame: ASUS M2N32SLI-DELUXE
http://aycu39.webshots.com/image/184...8688766_rs.jpg

Your cpuz screenshot is not validated. So, it has to be posted at Fudzilla only :ROTF:

24/4 - http://valid.x86-secret.com/show_oc?id=207750
1.392v
http://valid.x86-secret.com/ccpuz.php?id=207750

Suicide - http://valid.x86-secret.com/show_oc.php?id=184746
1.6v - Stock cooled
http://valid.x86-secret.com/cache/184746.png

OEM X2 3600+

AD03600IAA5DL
CAAFG 0651 XPAW
393 "T" 1.565vcore

Brisbane was air cooled with stock hs.

mobo Biostar Tforce6100/5400ul Suicide cpu-z with only 1/2 day test

http://valid.x86-secret.com/show_oc?id=180140

nullface what were your temps?

Copy pasted most of this out of the other OC thread, so it's not deja vu. More relevent here.
(nice idea 2goodforyou)


* AM2 Brisbane X2 3600+

* CAALG 0708UPFW

* DFI LANPARTY 590 M/2

3120Mhz 8hr stable @ 1.44v - Big typhoon 23c Ambient

http://img407.imageshack.us/img407/4...ongtermhp8.jpg

3300Mhz super pi stable @ 1.55v , cold water :)

http://img407.imageshack.us/img407/693/3300waterqn4.jpg

Here's how I am getting along so far:

Stepping: CAALG 0717CAN
Cooling: Scythe Ninja
Voltage: 1.275 in BIOS, 1.3 in CPUZ
The rest: See screenshot

http://imgplace.com/directory/dir422...43459_3537.jpg

Here is mine

So far been folding on this baby for about 30 minutes with no problems. Gonna let it fold all night, see how she does.

1.66V (According to the Biostar Utility) (1.6V in BIOS)
53 - 56C Temps
http://valid.x86-secret.com/show_oc.php?id=208053
http://img217.imageshack.us/img217/5674/untitledjk0.jpg

CPU Type: Athlon X2 3600+ Brisbane 65nm
Stepping: CAAFG 0652
Best Stable OC: 2945Mhz (9.5x310)
VCore: 1.4V
Temps: 50-51 C Full load
Cooling: Air (Thermalright Ultra 90)


The highest 24/7 365 stable oc I can do on this chip is 2.945 ghz at 1.4V (in bios, voltage reads 1.45 from Speedfan/CPUZ).

Here is a screenie with a 12+ hour Orthos test and and Nuclearus score:
http://filebox.vt.edu/users/asohangh...2945stable.JPG

The temp of the chip there is NOT as low as the SS indicates, for some reason Orthos screws up the Speedfan temps. I use the motherboard sensor as read by Speedfan usually and with two Toasts open max temp at this speed is 50-51C.

I can do 3ghz stable at 1.45V, but only with an extremely low ambient (like 65F or below), temps there are in the low-mid 50s.

Here are some screens of that:
http://filebox.vt.edu/users/asohangh.../threegigs.JPG
http://filebox.vt.edu/users/asohangh...egigstight.JPG

This was before I got the Ballistix, timings and memory speeds are much higher at 3gs, I can do DDR2 1000 C5 timings or DDR2 866+ C4 timings.

And finally, here is a suicide shot:
http://valid.x86-secret.com/show_oc?id=187485

Stepping: Unknown
Vcore: 1.4 V in BIOS
Cooling: Stock
Temperatures (idle/load): ??/51
Stability tests: ORTHOS 8h stable
System: MSI K9N SLI-2F, AMD X2 3600+ Brisbane, 2x1024 Crucial Value Select PC5300 D9HNL

http://aycu29.webshots.com/image/203...3299272_rs.jpg
http://aycu33.webshots.com/image/186...8741519_rs.jpg

Highest clock: 293*9.5=2783,5 mhz @ 1.5 V.
Will post better results, just got started :)

Well, after seeing all the 3GHz+ stories here, I decided to get a 3600+ myself aswell. But it doesn't really clock that wonderfull. I allready ordered a 4400+ to replace this one, hoping it will be a tad better! :p:
This is what it can do...
Speed: 2,81GHz
Voltage: 1,58V
Cooling: Thermalright SI-128 with 1400rpm fan
http://img243.imageshack.us/img243/2...0281ghzoz4.jpg

http://i7.tinypic.com/660cyok.jpg

Is there someone who can tell me when i go to an mp 7 and a htt 390 the performances goes slightly down?
I mean is there an disagree possible when i lowerd the mp and go up with the htt?

Dfi Lp ut sli 590
brisbane 3600 x2
Team Group Xtreem-D2-800 2048
Liquide cooling.

regards Mrballpoint.

just received a new mobo/ram for my Brisbane to play with.

Biostar TF570 SLI and Ballistix 8000

So far I've very impressed with the combination. 1157 MHz vdimm 2.0v

http://valid.x86-secret.com/show_oc?id=215222

http://img149.imageshack.us/img149/9595/amdly4.jpg

more testing : 1209 MHz I haven't used the 2.4 jumper yet.

http://img72.imageshack.us/img72/1930/untitledcp1.jpg

http://valid.x86-secret.com/show_oc?id=215274

CAAFG 0652 SPMW
1.4V set in bios
Thermalright Ultra-90
Biostar Tforce 6100


3.0ghz is the 24/7 setting..

3.1 was stable for benching

couldn't get 3.2 to load windows. :(

Hello to all, I found this forum on the web, pretty good and interesting, I'm a Chilean, the third best score in SuperPi 2M on AM2 Socket here... for the moment! So im trying to get down to the first place, 1 second faster.


This is my Best OC
http://img442.imageshack.us/my.php?i...uperpi7wp3.jpg

and this happened when i Tried to get more out of the rams

http://img329.imageshack.us/my.php?i...superpipp5.jpg

I think I will and cant get another better timing in SuperPi

Thats why I came here to ask you guys...

My Computer is a

4800 Brisbane x2
With a DFI Infinity NF UltraII-m2
and some mushkin 2x1gb XP2-6400 (4-4-3-10)

My stable settings for SuperPi Where
- 248 FSB
- 12.5 Multiplier
- HT Link 993
- 1.6 Vcore
- 2.1 Vdimm
- 4-4-4-12 (23 TRC Bank Cylce Time) <--- Should I Lower this one too?!!?!?
- Mems workin @ 443x2 -> Somtin like 880 Mhz


I think thats all, a big hello for everyone and i hope I can easily integrate this community.

I invite you all to www.chilehardware.com a chilean overclocking and hardware website, pretty interesting with lots of reviews.

Bye

Cris

well, you are the 4th then lol ;)
my 2M super pi is 66.346s
try cl 5-4-4-x @800 divider, it may help
brisbane 4000+
3052Mhz@1.44V mem at 519mhz@2.3V 5-4-5-9

Quote:

---

Originally Posted by Mad_Man

well, you are the 4th then lol ;)
my 2M super pi is 66.346s
try cl 5-4-4-x @800 divider, it may help
brisbane 4000+
3052Mhz@1.44V mem at 519mhz@2.3V 5-4-5-9

---

I forgot when i try running the sistem at 1.65 vcore 267x12 and latencies 4-4-4-10 the computer gets to the loading of windows, but stays there forever...... Is it the ram?

Wich is the safe Volt for Vdimm, im scared to go further 2.1v, thanks madman for the advises and another question...

Is it better more fsb and less multiplier ? like reaching 3100 mhz with multiplier 12 is better than with 12.5?

greetings

- 1.325V
- Arctic Cooling Freezer64 Pro
- 33C/45C
- DFI Infinity NF570-M2/G, Corsair XMS2 DDR-667 1GB, X2 3600+ Brisbane
- OCCT

My first post. This is an older screenshot. I currently run 1.325V.

http://compsupportforums.com/index.p...e=post&id=1164

Quote:

---

Originally Posted by PKdor

I forgot when i try running the sistem at 1.65 vcore 267x12 and latencies 4-4-4-10 the computer gets to the loading of windows, but stays there forever...... Is it the ram?

Wich is the safe Volt for Vdimm, im scared to go further 2.1v, thanks madman for the advises and another question...

Is it better more fsb and less multiplier ? like reaching 3100 mhz with multiplier 12 is better than with 12.5?

greetings

---

regarding multis, some cores like higher, some doesnt like certain multis... it depends. Higher FSB vs Multi doesnt matter, as long as it keeps your mem at max ;) try different combinations.

try loosen your timings, my ram (corsair 333mhz 4-4-4-12) is stable at 509mhz 5-4-5-9 but it boots with 4-4-5-9 but crashes in like 10mins.

without aditional cooling, i wouldnt go above 2.1V myself, but with a little airflow, i would say that under 2.3V its safe. I saw too much dead mems that were running at 2.5V on 680i mobos...
regards :)

btw, aint 1.65V too much for 65nm chip? i hope your not pushing that 24/7 throught it... mine needs only 1.44V to reach 3052, and 1.46V to 3.1Ghz, but then the mem errors out :(

Quote:

---

Originally Posted by Mad_Man

btw, aint 1.65V too much for 65nm chip? i hope your not pushing that 24/7 throught it... mine needs only 1.44V to reach 3052, and 1.46V to 3.1Ghz, but then the mem errors out :(

---

Hmm 1.65 V is just for benchmarking like SuperPi, i never leave it like that 24/7, actually i leave it stock for 24/7 until i get a better PSU and my big tyhpoon VX :D:D:D:D

ill try then the memories @ 1000 mhz with 2.2V or 2.3V depends.... and loosen up a little bit the timings

thanks a lot!

An update on my benchmarking and OC
got to first place in superpi2m
:F:F:F

http://img209.imageshack.us/img209/5...rpi9sa3.th.jpg

Quote:

---

Originally Posted by PKdor

An update on my benchmarking and OC
got to first place in superpi2m
:F:F:F

http://img209.imageshack.us/img209/5...rpi9sa3.th.jpg

---

nicely done mate :up:
wish i had ram that will do 1+ghz at 4-4-4-x

I have to tweak the rams further, but anyway it looks stable, at least 2Hours of Orthos...

296*10.5=3108Mhz
1.47 Vcore
mem 518 5-5-5-9 2.25V
Pi 2M: 65.603s

all day super duper stable ;)
291*10.5=3052Mhz
1.44Vcore
mem 509 5-4-5-9 2.25V

btw, its brisbane 4000+ CAALG 0704 VPAW
http://valid.x86-secret.com/show_oc?id=218390

Wondering if I will go wrong with a CAALG 0708TPMW stepping . Sure getting to 3+ GHz would be !!!! but any thing past 2.5 were be great.

I have seen later batchs get there. This one is coming from closer the center of the silion? I through that lower letter meant that?

I've seen that even later batch chips do 2.8 GHz quite easily.

caalg 0706aa 3600+ from newegg
biostar tforce 7050
2x1gb patriot 4-4-4-12 @ 400

Seems I can do 2.7 orthos 10 hour stable at stock voltage and cooling, but I've had to bump upward of 1.45 to get stable at 2.8.. if it doesn't get to 3.. its going back to 2.7.

water cooled
3600+ 3ghz @ 1.475v in bios 1.51v in cpuz
caalg 0708tpmw

1hr orthos stable link http://valid.x86-secret.com/show_oc.php?id=235316

Guys, have you tested some BE CPUs? I'm looking for a processor , that can reach 3.1-3.2 GHz, but in Bulgaria there aren't much 3600/3800 F3s left so I have to choose between 4000+ (CAALG or CAAUG - these are the steppings I can find) or BE 2300/2350.Which one would you recommend me and can you tell me what steppings should I look for? :D


My current mobo is Epox MF4 J3 - boots up to 310 HTT(after that it wouldn't post no matter the settings :shrug:), but I can change it - not sure whether the BEs will run ot the Epox.Biostar TF 560 AM2+ and Jetway M25GT6-SG, I think, are not bad(I'll appreciate any comment on the mobo :) ).

I have made some modifications to the cooling in my computer, which I think and hope should allow me to crack 3Ghz+ with my chip.

First of all the IHS has come off and I have a lovely naked CPU. This is now attached to a lapped TRUE 120 with a Yate Loon DSL-12 and is giving load temps under Orthos at 2.9Ghz (1.3V in BIOS, 1.325V in CPUz) of 37 degrees!

Hopefully, my motherboard has the headroom to get up to 330HTT or so with stock cooling.