The G0 Steppings Thread with pics(Translated Version)

Go's secret, Wat has GO been changed that makes intel so much better!
Wat kinda quad core could do 4ghz in air and run over 3dmark06 ? Intel core 2 extreme Qx6850.

i picked this QX6850 from many i have, this is not the best one, but at 4ghz, it does the best job.
http://www.coolaler.com.tw/coolalerc...850/1062/1.JPG

M/B ：ASUS P5B Deluxe
MEM ：KINGBOX Micron D9 2GB Dual Channel
HDD ：Seagate 250g SATAII 16Mb Cache
VGA CARD ：ELSA 8800GTS
POWER: SevenTeam 1000W
OS ：WIN XP SP2
CPU COOLER：Tower 120
CPU ：Intel Core 2Extreme QX6850 G0

Room ambient:25c.

http://www.coolaler.com.tw/coolalerc...850/1062/2.JPG


PPl who have played with Qx6700 all know that, quad cores are more sensetive for the temps than c2ds, if temps goes a bit higher,it will cause the stability issure of o.c. So its harder to be stay under air with quad cores than using c2ds.
But now with Go stepping , qx6850 has been changed. Heard that E3 has decrase the temp by 10 degrees!
That is why Go stepping is able to do 4ghz with air.
Vcore1.56v
3dmark 06 @11500pts.
Proof:http://service.futuremark.com/compare?3dm06=2015575

http://www.coolaler.com.tw/coolalerc...62/4G_3D06.gif

Sorry for the lack of Translations, may be hard to read, but at least get a lil feeling of wat GO is lol.

WOW!1.504V passes too.
3DMARK 06@11484pts

http://www.coolaler.com.tw/coolalerc.../4G_3D06_4.gif
http://service.futuremark.com/compare?3dm06=2015934

There is another guy with the GO stepping.
http://img.coolaler.com.tw/images/nz...uim32ylvr5.jpg

Go stepping that does 4.359ghz under air.
Room temp: 26C in the noon(hot)
M/B ：ASUS P5B Deluxe MOD
MEM ：Kingbox DDRII800 2GB Dual Channel
HDD ：WD 2500KS SATAII 16Mb Cache
VGA CARD ：6200TC
POWER: SevenTeam 1000W
OS ：WIN XP SP2
CPU COOLER：的Tower 120
CPU ：Intel Core 2 Extreme e6850!
Thermalpaste:Y-500
http://www.coolaler.com.tw/coolalercbb/E6850/4310_1.JPG

http://www.coolaler.com.tw/coolalercbb/E6850/4310_2.JPG



http://www.coolaler.com.tw/coolalercbb/E6850/4310_3.gif

Few months earlier, 4.31ghz is a impossible mission under air.
But now G0 has given has a hope. ADD OILS INTEL FTW!!!!

http://www.coolaler.com.tw/coolalercbb/E6850/4359.gif

good god thats one awesome chip... the cpu temp is strangely low "for just air cooling".. i would suspect something like that with water cooling not with air..

These G0s rock. :D
I wonder how much it will take till they bring them to the non-Extreme chips.

all will be like early july.

My question is when would they start cropping up in the states :D I always end up with voltage hungry heat spewing beasts... :shrug: why me???? hehehehee

Quote:

---

Originally Posted by OldGuy

My question is when would they start cropping up in the states :D I always end up with voltage hungry heat spewing beasts... :shrug: why me???? hehehehee

---

LOL cuz ur olD?
old ppl should go buy lotteries, u guys rock .

Quote:

---

Originally Posted by fc4ever

LOL cuz ur olD?
old ppl should go buy lotteries, u guys rock .

---

Nah...I'm only 44. Still a pup...

So will the retail Q6600s be G0 stepping at the time they are reduced in price in July? That is the CPU that I want for my first ever build using when the prices are reduced and plan to get it immediately after the price reduction and use air cooling.

is set already the launch day in july?

GOOD GOD! That's amazing! Do the G0 revisions include the dual cores?

E is dual core.

What about any Q6600 benches since the majority of people will be buying that chip :D

Silly question but my q6600 isnt a G stepping cpu is it lol ? fpo/batch L644G101 packdate 4-11-07

Quote:

---

Originally Posted by fc4ever

Few months earlier, 4.31ghz is a impossible mission under air.
But now G0 has given has a hope. ADD OILS INTEL FTW!!!!

---

are you sure? :D
4.3GHz for me in that sort of ambient no probs

but you are right these G0s are good :) very good indeed


i would love a quad core at 4Ghz wow

Awesome results Coolaler! Always come through with the best previews ;)

holy guacamole;

now THAT's what i'm talkin about.

and that is still 65nm - just imagine yorkfield @ 45nm :slobber:

YEA HOLY GUACAMOLE!
G0 fTW

fc4ever,
"Hongkong" isn't a language...
;)

Quote:

---

Originally Posted by largon

fc4ever,
"Hongkong" isn't a language...
;)

---

ROFL good point

Quote:

---

Originally Posted by largon

fc4ever,
"Hongkong" isn't a language...
;)

---

HOly:banana::banana::banana::banana:, some good teachers here, yea i got edit lol~

Great results, the big question, will the STABLE max oc increase from a good chip of the current revision?

Whilst its all well and good to hit 4ghz on air is it stable for DC/work? :confused:

Same question of 3NZ0: how really good are this g0 chips? Can they be used @ 4Ghz only for benching or there is something good also about daily-use?

I'm reminded of Presler, in terms of OC potential. ;)

Great result

but ES always seems better than boxed version

Well all have to wait and see for more results.

Tomorrow if I can I will try one of this G0 CPUs (QX6850 G0) on an Asus Striker. I will inform you.

1,525 vCore 1,45v VHT 1,55v NB

http://img528.imageshack.us/img528/6...8501xk1.th.jpg

Notice that on AsusStriker 1,525v means 1,42-1,44v in full load ;).

Quote:

---

Originally Posted by SchiuZ

1,525 vCore 1,45v VHT 1,55v NB

http://img528.imageshack.us/img528/6...8501xk1.th.jpg

Notice that on AsusStriker 1,525v means 1,42-1,44v in full load ;).

---

check with DMM

Liquid Cooled but very hot room. AsusStriker Vista64Ultimate 4x1GbyteGSkillMemory @ 800Mhz 4-4-4-12-2T (default) 2.10v

http://img106.imageshack.us/img106/4...6mhzlw6.th.jpg

I will try to incrase FSB, anyway I could boot and run 3DM06 but the system is unstable, and I am not interested in it (only stability is important for me, I need this PC for work ;)).

Quote:

---

Originally Posted by dinos22

check with DMM

---

What is DMM?:D

multimeter

I did, but not only on this CPU, also on a QX6700 ES I had. vDrop is very higth on my mobo when using 4Core CPUs, the voltage that you can see in the screenshot is correct also checking with a multimeter ;), 1.43-1.44 volts ;).

Quote:

---

Originally Posted by tomati

Great result

but ES always seems better than boxed version

---

not necessarily always.

Quote:

---

Originally Posted by Noob-ftw

GOOD GOD! That's amazing! Do the G0 revisions include the dual cores?

---

Quote:

---

Originally Posted by loc.o

E is dual core.

---

if you look at the 4.3ghz one, it's e6850, not qx6850 :)

looks like I'll be holding off on e6420 until i can be sure of getting something g0 :)


OP, would it be too much to ask for some more specific testing? if not, I was wondering if you could find max stable clocks with 1.5v real volts on dual core.

Thanks :)

Quote:

---

Originally Posted by loc.o

E is dual core.

---

E is old, G is new, G likes voltage a lot more than E did. G also does really well with low voltage, just a better chip in general.


G is new conroe


M is new allendale


G quad-core is a little harder to O/C than G dual-core. G dual-core is very impressive.

can't wait to see these g0 (or rather more likely g1 when it hits retail?) show up on intel's sspec finder. hopefully it goes all the way down to e6320 :)

Quote:

---

Originally Posted by ziddey

can't wait to see these g0 (or rather more likely g1 when it hits retail?) show up on intel's sspec finder. hopefully it goes all the way down to e6320 :)

---

G0 will be retail.

Might be a long time before it hits retail on a non-1333FSB chip.

so,if you buy a new CPU after the 22nd of luly,like an E6850 you have a G0 stepping?Or you specifically need to ask for it??I'm not sure wich one to get yet:An E6850 or a Q6600.

how to identify this stepping when procesor is inside box?

Quote:

---

Originally Posted by irev210

E is old, G is new, G likes voltage a lot more than E did. G also does really well with low voltage, just a better chip in general.

---

I meant E as in E6850 for dual core proc.

Quote:

---

Originally Posted by TEDY

how to identify this stepping when procesor is inside box?

---

goto intel's sspec finder and it'll show which sspec uses what revision. it'll say which sspec it is on the box/cpu.

does Coolaler allow you to use his thread?
without asking the original thread owner that is not good thing in any where

Quote:

---

Originally Posted by guess2098

does Coolaler allow you to use his thread?
without asking the original thread owner that is not good thing in any where

---

coolaler is getting free publicity

it kinda offsets it don't you think

Quote:

---

Originally Posted by Forum Rules

26. Plagiarism
We value the content available here, posting content not obtained by yourself without clearly stating so can result in banning.

---

Thread closed....fc4ever, YPGM.