KumKum's new unit | WoRkLoG :-)

Hi

Some days ago nice guy called KumKum ask me about new unit ... more powerful subsitute for his Vapochill LS, becasue he wasn't really satisfied with temperatures ....so ... :p: :

Specs :

Compressor: HIGHLY CHW 33TC4-U - it's 18000 BTU/ 1.5 HP rotary
evap: steeper by piotres
XV: captube 0.8 mm
condenser: 3 row, cooled with 4 x 120 mm 12v fans
Refrigerant : R507+R410a blend
Case : Chipboard base plate 32 x 40 cm, painted black
Others : SLHX - 15mm with 1/4' inside, around 50 cm long

I want to reach sth like -48-50*C@225W load .

It's worklog ...I've start making this unit 2 days ago, and till now I've worked on it not more that sum of 6-7 hours :p: .

So I have only make baseplate yesterday :

http://www.members.lycos.co.uk/piotres2/kumkum/1.jpg

and

Today I prepared condensor :

http://www.members.lycos.co.uk/piotres2/kumkum/2.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/3.jpg

and braze suction line :

http://www.members.lycos.co.uk/piotres2/kumkum/4.jpg

:)

Regards
Peter

Thats wayyyy overkill!! He don't need nothing that size for his pc just swap out the compressor in his LS for a bit larger one. If ur gonna use an 18000btu power hog ur gonna need a much larger condensor than the one u got there! and much more airflow than those tiny 12v fans can make.

Off course He won't. The power consumption decrease with the evaporating temperature, if he doesn't need such power to carry load it won't consume a lot and the condenser is large enough, as a graphic card doesn't consume the same in IDLE and FULL (the temperature isn't the same too).

I'd say 1.5 HP is overkill for a singlestage, that'd probably be a beast of an autocascade compressor though. Hell anything over 1/2 HP is a bit much in my book. That's going to be one angry sounding rotary though :(

nothin to see atlm ...

ridiculous: yes, awsome and has great potential: definatly! this will make a killer unit.. just an idea, if hes already going that far out why not get a dual stage?

Dang, that's way more BTU's than the 1 hp rotary I'm using! And I'm aiming for a 400 watt load...A chiller, of course ;)

But seriously, autocascade that, man!

i don't understand why thats in a SS, kinda a waste of 1hp but not saying you shouldnt do it!

I see no reason why it's wrong to use this. Just hope you don't have creating a vacume so it has lower temps but poor holding temps!

I want a kick off SS that is as cold as possible, can hold the highest heat laod going. Why, Auto C is too sodding dangrous, SS is cheap and easy, Cascade is too costly and yet to see one bar LD and BazX that i would want to buy.

I think it's just a bit overkill for a 24/7 unit. Why not just mod the VapoChill, even if it involves taking everything out and replacing it.

Modding VapoChills to the heat load of todays CPU's is certainly possible, more and more people are getting theirs upgraded to support the newer CPUs.

Why not just autocascade it for -70C? You have the power there!

I was gonna say the exact same thing NoL. It's as shame to see such a large compressor wasted on a single stage. C'mon piotres, do what the public demands, auto-c that baby.

Hi

Guys, sorry but not this time ... mine client want just powerful and still quite cheap unit ..moreover He want to have it quite fast in home. Autocascade will be much more complicated, and for sure it'll take much more time to built ...which I haven't got now :( . + I don't like to use co2 (You know I don't like to have "strange" problems like dry-ice forming ;) ) ...I must have R23 for auto-c and now I haven't got it . Maybe in future I'll build auto-c with compressor like that, I don't say no . :D

Today I insulate suction line :

http://www.members.lycos.co.uk/piotres2/kumkum/5.jpg

Tomorrow no work - I go with mine girlfriend on journey ;) .

Regards
Peter

Quote:

---

Originally Posted by Pete

I see no reason why it's wrong to use this. Just hope you don't have creating a vacume so it has lower temps but poor holding temps!

I want a kick off SS that is as cold as possible, can hold the highest heat laod going. Why, Auto C is too sodding dangrous, SS is cheap and easy, Cascade is too costly and yet to see one bar LD and BazX that i would want to buy.

---

Oh, believe me, nothings wrong about this :) just has soo much potential in a dual stage, but heck, this is still going to be an unbeleivable SS!

Like [XC] gomeler said u don't need anything above a 1/2hp compressor to do this job and not only that a 1/2hp compressor will use less power and will be quiter. Does KumKum know that this compressor is massively oversized and is wasting his money on something he don't need???

Admittedly, though, get some r507 in there and it'll be sitting darn near -50*C.

subscribed! i always love the work log in progress :)

looks great so far, keep up the good work.

any update?

Quote:

---

Originally Posted by piotres

Tomorrow no work - I go with mine girlfriend on journey ;) .

Regards
Peter

---

What type of journey....? One with a happy ending, LMAO :rofl:

Hi Guys

Sorry I've back from trip yesterday at evening, and now I have much work in school, so I won't be able to work on unit every day . But I'll make some work till end of this week, I really hope to finish that build :-).

That system will be making better temperatures loaded than eg. system with 9000BTU 3/4 HP rotary, so please don't say that's waste of money :yepp: .

Regards
Peter

New work done yesterday and today :

http://www.members.lycos.co.uk/piotres2/kumkum/6.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/7.jpg

I've decided to add small SLHX ..15 mm pipe with 1/4' inside ;) .

http://www.members.lycos.co.uk/piotres2/kumkum/8.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/9.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/10.jpg

Next part of work I plan to make this weekend :p .

Regards
Peter

i like your slhx :)

Isn't that tube on the exit of the condenser kind of steep?

I thought if the refrigerant has condensed it should really be going level or downhill so it doesn't boil back off :confused: ? Someone please correct me if i'm wrong.

Does the refrigerent go downhill in the succion line? No, however the density isn't the same and It move anyway... The section is small enough for the liquid to move properly, even with a 1/4hp we can put the filterdrier (until 15g) upwards there isn't any probleme with that (however the section is more important and the speed lower), so with 1.5kw there won't be any problem at all :p

Humm look good there dude!

Unit looks very clean, good work :)

Today I've done :

http://www.members.lycos.co.uk/piotres2/kumkum/11.jpg

Evacuation

http://www.members.lycos.co.uk/piotres2/kumkum/12.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/13.jpg

Electric

http://www.members.lycos.co.uk/piotres2/kumkum/14.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/15.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/16.jpg

And later unit made devil's number hehe :devil: . I've tryied pure R410a and I've found that blend with R507 is much better ..with pure R410a hiside with 225W load goes up to 19 bara, -54*C evap - but that was with no insulated SLHX (23*C ambient) and later I've swap it for R507&410a blend (around 90%/10%) ..hiside max 15 bara and -57*C@225W :) .

http://www.members.lycos.co.uk/piotres2/kumkum/17.jpg

Final charge, no load :cool: .

http://www.members.lycos.co.uk/piotres2/kumkum/18.jpg

225W loaded = -57*C evaporator :D .

http://www.members.lycos.co.uk/piotres2/kumkum/19.jpg

Tomorrow I plan to test unit on E6600ES and later pack it :yepp: .

Regards
Peter

Very nice, powerful.

Nice work piotres, some good temps from that S/S mate.

Don't let us wait so long for e6600 benches :)

That's a nice benching unit.

Still way overpowered i think.

Quote:

---

Originally Posted by _HL4E_HalfLife_

Still way overpowered i think.

---

just think of it this way, if he wants to later, he will have plenty of power to convert the unit to an auto cascade without having to buy a new compressor:p:

Nice job again Piotres :)

KumKum will be very happy to have it for bench \o/

Nice job Piotres! That's a nice load temperature, probably about the same as dry-ice in a similar load scenario.

Hi

Last part of work from me :D :

http://www.members.lycos.co.uk/piotres2/kumkum/20.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/21.jpg

100% finished :) .

http://www.members.lycos.co.uk/piotres2/kumkum/22.jpg

Evap temp just before turn PC on ...

http://www.members.lycos.co.uk/piotres2/kumkum/23.jpg

E6600ES @ 3.9Ghz/1.6V idle. Damn mine unmoded Asus P5N-E SLI don't want to run much over over 430 FSB :shakes: . That's why so low clock , and vcore without vmod is poor too :yepp: . Sorry guys for that :shakes: .

http://www.members.lycos.co.uk/piotres2/kumkum/24.jpg

Same in stress during SuperPi ...as You can see 0.5*C diffence, I think it show power of that "little" compressor :up: .

http://www.members.lycos.co.uk/piotres2/kumkum/25.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/26.jpg

http://www.members.lycos.co.uk/piotres2/kumkum/27.jpg

Ready to go ... :)

Best Regards
Peter

Job well done.