CELLSHOCK Rams get 4 WR with SINGLE 8800GTX...

As tittle says.... :D

CELLSHOCK Rams get 7 WR with SINGLE 8800GTX...

Done with CellShock PC2-8000 (1000C4) 2 x 1GB Ram Modules....
I HAD to give some credit to CellShock rams though coz they did well I think....No?....:D :toast:

EDIT: Continue with CellShocks PC-9200 Ram modules with the RED heatspreaders.... :)

Benchies where done with the following:

CPU = Intel Core 2 Duo X6800 retail (631)
Motherboard = ABIT AW9D-MAX (the IC7 follower as for me) with the new BETA bios for the QUAD Cores... :)
Ram Modules = 2 x 1GB PC2-8000 (1000C4) CELLSHOCKS
PSU = SEVENTEAM 1000Watts Model: ST-1000E-AZ - it can HANDLE a QUAD core @ 5100MHz fully loaded and a VGA highly clocked and MORE. ;)
VGA = 8800GTX - moded - with new NVIDIA drivers 158.19
CPU Cooling = LN2 with Gorillakos' LN2 container at -137*C
GPU(VGA) Cooling = LN2 with k|np|in's Tek-9 LN2 container at - 124*C
Tools = DDR Maximizer powering the Ram modules at 2.81Vdimm
Many 12cm x 12cm Delta fans... :D


SINGLE CARD World Records..... :p: :D Next week I'm going SLI..... ;)


AquaMark3 WR.....:)

http://www.thelab.gr/images/Hipro5/A...3_918_1214.jpg


3DMark2001SE WR.....

http://www.thelab.gr/images/Hipro5/A...918_1215_1.png

http://www.thelab.gr/images/Hipro5/A...918_1215_2.png

http://www.thelab.gr/images/Hipro5/A...918_1215_3.png


C O M P A R E 2k1 URL......


3DMark2003 WR.....


http://www.thelab.gr/images/Hipro5/A...918_1215_1.png

http://www.thelab.gr/images/Hipro5/A...918_1215_2.png

http://www.thelab.gr/images/Hipro5/A...918_1215_3.png


C O M P A R E 2k3 URL.....


3DMark2005 WR.....


http://www.thelab.gr/images/Hipro5/A...918_1215_1.png

http://www.thelab.gr/images/Hipro5/A...918_1215_2.png

http://www.thelab.gr/images/Hipro5/A...918_1215_3.png


C O M P A R E 2k5 URL....


3DMark2006 WR.....


http://www.thelab.gr/images/Hipro5/A...918_1215_1.png

http://www.thelab.gr/images/Hipro5/A...918_1215_2.png

http://www.thelab.gr/images/Hipro5/A...918_1215_3.png


COMPARE 2k6 URL.....Hit me hard..... :D


EDITED...... :)


.....and tomorrow I'll bench the 2k6 one..... ;)

Thanks everyone for reading me.... :D


.

for a second there i thought you got them to run at 3-2-2-x 400+ :eek: :) :D

great results

what about SLI man.........can't get KP to relax up the top :D

Incredible, I think I will retire from 3D now :D ;)

Quote:

---

Originally Posted by dinos22

for a second there i thought you got them to run at 3-2-2-x 400+ :eek: :) :D

great results

what about SLI man.........can't get KP to relax up the top :D

---

I just wish I had my Fatbodies at 417MHz and Cas 3-2-2-2.....Bad luck though as you already know.... :(

k|ngp|n IS relaxed..... :)

Quote:

---

Originally Posted by G H Z

Incredible, I think I will retire from 3D now :D ;)

---

.....ohhh...not yet....I haven't benched the VGA at 974MHz core yet.... :D :toast:

congrats george!!!

Quote:

---

Originally Posted by saaya

congrats george!!!

---

Thanks my friend..... :) :toast:
After 2 weeks of bad luck (3 mobos died, my best Corsair 8000UL got broked, etc), I'm back... :)

Ripping up some single card world records, nice 502 LH on 2k1.

Awesome stuff as always :worship:

WoW impressive score! congrats :toast: I hope see 100k mark on 3d01 by single card in future :)

great score's george , really look forward what 06 will give .
whet's the max they can do ? look for some teamgroup 6400c3 those kick ass on cas3 ;) mine run 480mhz 3-3-3-3 2.75vdimm :p: .
p.s. did u read my pm ?

Great scores, professional work:toast:

great score's :)
keep on
:toast:

Quote:

---

Originally Posted by hipro5

Thanks my friend..... :) :toast:
After 2 weeks of bad luck (3 mobos died, my best Corsair 8000UL got broked, etc), I'm back... :)

---

ouch sorry to hear about the ram.. R.I.P. 8000UL :(

but congrats on the WRs :D

Incredible..Nice WR's!!! Congrats!! :thumbsup:

Look like Cellshock will begin got a solid reputation.. (arrr, i have week 34, why i have not wait ...:brick: I really need vdimm mod a board for see if they clock well so tight..)

George you still think fatties are the way ahead now?

Amazing as always.

I cant even find words! you are out of this world Hipr05!
That is NOT FUC*ING NORMAL!!!! ;)

:worship: :worship: :worship: :worship: :worship:

Wow ... just wow

Congrats George ,,, and good luck with the striker ,,,,,,,,,,,,,, i mean SLI :D

IMPRESSIVE!!
Gratz man, that was a hard peace of work but u did it! :toast: :toast:
What mobo are u going to use for SLI benchies?

Congrats George :toast:

What bench order did you use for 3dm01?

Huge congrats. Excellent job once again.

Show us your setup, I love pics :D

Amazing scores :)

Congratulations george :toast:

A lesson of OC Art from a XSLegend that is really a pleasure to watch :D

Hope your bad luck went away: and remeber Deltas can be dangerous;)

Can't wait to see the 06 results, I have a AW9D-MAX here and with old bios gave me really bad results with the QX6700 (core3 and core4 don't oc) hope the new new BETA bios for the QUAD Cores can solve that :)

congrats hipro5!
you will soon see that high bandwidth is powerfull too (especially in 965 and 680 ;) )

Quote:

---

Originally Posted by hipro5

Thanks my friend..... :) :toast:
After 2 weeks of bad luck (3 mobos died, my best Corsair 8000UL got broked, etc), I'm back... :)

---

yeah bill told me...
well now it looks like you have your luck back :D

Well done Hipro :toast: :toast: :toast:

Dude. Very nice job!


Time for 2x1G clocking from now on I guess? :p


Let those Fatbodies RIP

Thanks a lot guys..... :) :toast:

Quote:

---

Originally Posted by FUGGER

Ripping up some single card world records, nice 502 LH on 2k1.

Awesome stuff as always :worship:

---

Single VGA gets higher numbers in CH, LH than SLI.....plus these drivers are GOOD.....I couldn't believe that they could push even CH and LH, but they did after all.... :)

Quote:

---

Originally Posted by blind_ripper

great score's george , really look forward what 06 will give .
whet's the max they can do ? look for some teamgroup 6400c3 those kick ass on cas3 ;) mine run 480mhz 3-3-3-3 2.75vdimm :p: .
p.s. did u read my pm ?

---

Yes I have read it..... ;) :D I use "water buffer" for the container and it holds the difference between idle and load within 2 - 5(max) *C...... ;)
Rams are maxed out.....They can do about 455MHz Cas 3-3-3-4 for Super-Pi only......esdee has puted his hand on them, that's why..... :p:

Quote:

---

Originally Posted by Johnny Bravo

George you still think fatties are the way ahead now?

---

Yeap...... 400MHz Cas 3-2-2-2 equals with 437 - 440MHz Cas 3-3-3-x.....SO if I could play my Fatties at 417MHz, I had to play the GKX at ~470MHz with Cas 3-3-3-x....;)

Quote:

---

Originally Posted by kemo6600

Congrats George ,,, and good luck with the striker ,,,,,,,,,,,,,, i mean SLI :D

---

Thanks M8 BUT NOT Striker for me......I'm buying an ABIT IN9 for SLI tomorrow.... ;)
I had the QUAD (Gorillakos') at 3930MHz with the Striker, 3890MHz with the EVGA and 4000MHz+ with the IN9......SAME config all of them..... ;)

Quote:

---

Originally Posted by massman

What bench order did you use for 3dm01?

---

Ahhhhh....... :D :slapass: :D
OK.....Nowadays the bench order has changed..... ;)
1. ALL of the benchies in 2k1 is with 4.8 LOD
2. Order:
a. Nature FIRST
b. Lobby Low 2nd
c. Car High 3rd
d. Dragon Low 4th
e. Lobby High 5th
e. Dragon High 6th
f. Car Low 7th and you know....re-run and re-run till it goes higher.... :)

TIP: Format PRIOR the instalation of the WinXP, the HD as FAT32 with 16K cluster size.... and when the instalation begins, don't change it..... ;)
I used Western Digital's tools to do so.... :) plus use the NEW directX.... ;)

Quote:

---

Originally Posted by Pedro Rocha

Congratulations george :toast:

A lesson of OC Art from a XSLegend that is really a pleasure to watch :D

Hope your bad luck went away: and remeber Deltas can be dangerous;)

Can't wait to see the 06 results, I have a AW9D-MAX here and with old bios gave me really bad results with the QX6700 (core3 and core4 don't oc) hope the new new BETA bios for the QUAD Cores can solve that :)

---

I had a 2k6 benchie past week but it was done on my "general usage HD" with 100MHz PCI-E and QUAD at 5GHz all cores..... ;) I'll rebench it "real" tomorrow..... ;) :D

http://service.futuremark.com/compare?3dm06=1739578

Quote:

---

Originally Posted by esdee

congrats hipro5!
you will soon see that high bandwidth is powerfull too (especially in 965 and 680 ;) )

---

:p: on 965 I agree coz it's "bugged" somehow with low latencies.....On i680 just NO WAY.....Find my posts of testing..... ;)

Quote:

---

Originally Posted by k|ngp|n

Well done Hipro :toast: :toast: :toast:

---

Thanks Vince.... :) :toast:

Quote:

---

Originally Posted by wa77ss

Dude. Very nice job!


Time for 2x1G clocking from now on I guess? :p


Let those Fatbodies RIP

---

For the time been unfortunatelly yes......BUT I'm on trying to find a good 8000UL so to much my other one once again.... :(

Great job Hipro. It's really impressive run. :clap:

Really cool job hipro :D , congrats with the WRs, and sad about the mobos and you sticks :(.

Looking forward to see 06 and SLI ;)

Quote:

---

Originally Posted by hipro5

[B]Ahhhhh....... :D :slapass: :D
OK.....Nowadays the bench order has changed..... ;)
1. ALL of the benchies in 2k1 is with 4.8 LOD
2. Order:
a. Nature FIRST
b. Lobby Low 2nd
c. Car High 3rd
d. Dragon Low 4th
e. Lobby High 5th
e. Dragon High 6th
f. Car Low 7th and you know....re-run and re-run till it goes higher.... :)

---

Lobby low as second? Does it affect the maximum overclock for that specific test if you don't run it as second?

By the way, you might want to change some lods. Dragothic Low has always loved high lods and apparently, CH should scale better using high lod. Read BenchZowner's thread for more info. Exact numbers here

Quote:

---

Originally Posted by massman

Lobby low as second? Does it affect the maximum overclock for that specific test if you don't run it as second?

By the way, you might want to change some lods. Dragothic Low has always loved high lods and apparently, CH should scale better using high lod. Read BenchZowner's thread for more info. Exact numbers here

---

Lobby Low second to gain the max out of it.....You loose from Dragon Low by doing this BUT if you run DL 2 or 3 times, you gain the frames again, thing that can't be done with LL..... ;)

I'll test the LODs for the other testings.... ;)

Thanks guys... :)

sitting here, eyes and mouth wide open - incredible single card results O_O
awesome work george this will be massive in sli wohooooooooooo

Great runs! :slobber:

That's a very interesting order...btw low CAS is fine on i965, its low tRCD that isn't. IMHO in the end both high lats and low lats are strong, they just have to be pushed properly. Lots of performance can be extracted from just about any config.

No words...:slobber: :stick: :clap:

First of all, awesome results. Secondly, Hipro, you truly are a master and a great asset to everyone here. So many top overclockers impress with numbers, but your helpfullness and willingness to share knowledge with others truly has earned my respect. Oh yeah, and the fact that you get big numbers too :D

Congrats George...waiting for SLI action;)

hehe tell esdee to stay off the rams next time :D .
btw last time i heart the mobo had problem with getting all 4 core's multie unlocked , is this fixxed ?

wow, awesome scores, congratz :toast:

you are a very big cloker, no words......:clap: :clap: :clap:

Hipro :D
Hehe Cellshock is not bad rams :p:

Bad days gone, and now only good days :)

This single GTX run is ... hmmm pretty:woot:

Congrats for You !


Martin

amazing, in 3dmark01 106k should be easy with SLI

Incredible single card scores! :toast:

:eek: unstoppable

:clap: very great man!!!

Adequately respect hipro5 !

too bad nvidia wont let you sli with a 8x8x mobo. :(

It would be great if you could run your AW9D settings in SLI with the 8800's.

Awesome awesome awesome!!!

"WOW" is the only word that can describe your skill Hipro! :D

Insane results :eek:

Incredible job! We are waiting for the SLI run :)

Good luck!

Alex

Incredible!!
Great job:slobber:

I didn't see this. Wow.. It feels like all those SLI numbers we have seen before mean nothing.

More than just good single card results!

Great work George! :D

:toast:

impressive...congrats

Great job man!!:toast: Your rockn the single card world!! Keep it up man!:banana:

Great Job George!

Becarefull with those rams.... :p

Thank you guys........... :)

Today or tomorrow I'm going for the last 3D Benchmark......The 3DMark2006...... ;)

Quote:

---

Originally Posted by blind_ripper

hehe tell esdee to stay off the rams next time :D .
btw last time i heart the mobo had problem with getting all 4 core's multie unlocked , is this fixxed ?

---

Yes with the NEW BETA 15 ....... ;) Take a look at the CPU score of the 2k6 benchie I have uploaded a few posts back..... ;)

Quote:

---

Originally Posted by Revv23

too bad nvidia wont let you sli with a 8x8x mobo. :(

It would be great if you could run your AW9D settings in SLI with the 8800's.

---

Yes......TOO BAD..... :(

Quote:

---

Originally Posted by hipro5

Thank you guys........... :)

I had a 2k6 benchie past week but it was done on my "general usage HD" with 100MHz PCI-E and QUAD at 5GHz all cores..... I'll rebench it "real" tomorrow.....
http://service.futuremark.com/compare?3dm06=1739578

Today or tomorrow I'm going for the last 3D Benchmark......The 3DMark2006...... ;)

---

push the QUAD score to 5GHz+ for a 7.8k CPU score and 19k 3DM06 score:toast:

good luck hipro5:)

Nice score hipro!

Hey Hipro are those rams really maxed out, or are you just afriad to put more V's into them?

I remember you had that set of cellshocks that was well over 500mhz at 3-3-3 with 3.4v, right up until they died at 3.5v :D

D U M N !.......I JUST lost a 19536 marks 2k6 benchie..... :(
I was TOO excited about the fps I was showing and on the last GT I poored too much LN2 and when it finished and showed the score, it frezzed..... :(

Anyways, I'll be back with it in a few hours...... :)

good, 19.5k is not result we want :D

*grabbing some popcorn* http://ugly.plzdiekthxbye.net/small/s017.gif

Quote:

---

Originally Posted by zbogorgon

good, 19.5k is not result we want :D

---

hehe we want 20K :banana: :banana: :banana:

Quote:

---

Originally Posted by Revv23

Hey Hipro are those rams really maxed out, or are you just afriad to put more V's into them?

I remember you had that set of cellshocks that was well over 500mhz at 3-3-3 with 3.4v, right up until they died at 3.5v :D

---

Yes those rams unfortunatelly had some "troubles".....caused by....esdee.... :p: :D

Quote:

---

Originally Posted by zbogorgon

good, 19.5k is not result we want :D

---

Quote:

---

Originally Posted by kemo6600

hehe we want 20K :banana: :banana: :banana:

---

:D OK.....I'll put on the other VGA that can do ram clocks ~1280MHz and I will see..... :D

BTW.....I just got back.....I went and bought some more LN2...... :D

Awesome Hipro !

http://www.hwbot.org/result.do?resultId=602394
http://www.hwbot.org/result.do?resultId=602361

19947 PCMarks on PC mark 05 ,,, almost 20K

http://service.futuremark.com/compare?pcm05=853300

Quote:

---

QUAD QX6700 @ 5100MHz - 2 x 1GB CellShocks PC2-9200 - SINGLE 8800GTX @ 918MHz core and 1214MHz Rams - Coming SOOOONNNN............ with LN2 and SLI ...... :o)

---

congrats Hipro




you beat me massman

Thank you very much guys.... :D :toast:

Actually 2K6 gave me a REAL PAIN in the arss coz when it finished and showing the score, the computer frozed.... :( I let it go in noon to do some work and afterwards when I was relaxed and not p(r)issed off, I benched the wPrime 1024 to see how can this QUAD do and I think I took the World Record for the QUADs!.....No?.....

Afterwards I say to my shelf: why don't I bench PCMark2005 too?.....Firstly I benched it with the GeForce 8800GTS on air and at 675/975.....It was something like 18996.....I then fired up the 8800GTX under LN2 to see how it does.....and THERE YOU GO......ANOTHER World Record..... :D

After that and half an hour ago, I said to myshelf: Now that the system is under LN2 why don't I try 2k6 once more?.....So I did.....I "controled" the CPU at the last bench at -155*C and THERE YOU GO.....ANOTHER World Record..... :D

This CPU has more potential.... ;)

http://www.thelab.gr/images/Hipro5/A...918_1215_1.png

http://www.thelab.gr/images/Hipro5/A...918_1215_2.png

http://www.thelab.gr/images/Hipro5/A...918_1215_3.png


COMPARE 2k6 URL.....Hit me hard..... :D


Now I think it's time to relax and go home.... :)

Thanks a lot guys for your support and CellShock Rams for their support too..... :toast:


TO BE CONTINUED.....


.

Haha just awsome Hipro! :D :toast: :toast:

Quote:

---

Originally Posted by hipro5

Yes those rams unfortunatelly had some "troubles".....caused by....esdee.... :p: :D
[/B]

---

:stick: :stick: george come on!!! you killed them eventually!
the cellshock mems i killed was gorillakos :fact:

(lol)

Amazing results hipro!! :woot:

nice results hipro, but when are we going to see some SLI with those cards
with newer 158.xx drivers.....:)

^he is still on AW9D-Max.

Quote:

---

Originally Posted by Revv23

^he is still on AW9D-Max.

---

I know he is, but im just curious too see some SLI runs with latest 158.xx drivers on his amazing clocking cards thats all.......:)

Congrats Γιώργο :D maybe you should give 8800 ultra a try now :toast:

Quote:

---

Originally Posted by georgesod

Congrats Γιώργο :D maybe you should give 8800 ultra a try now :toast:

---

i think hipro5 didnt maximized 8800gtx s yet :)