OCTeamDenmark 25Liter Ln2+20 Kg Dryice = FUN :woot:

This friday I took of erly from work.
I was picked up at 11 by NoOne in his Golf :)

We drow to my place, Took my car that has a trailer coupling.

Ln2 is not for fun im told :p So we rented a tailer and drowe out to pick up 25 Liter ln2 and 20 Kg Dryice.
EDIT: And I even forgot to mention my MAN Oliver :p
His X3060, His PSU, His CPU and his RAM :p

SORRY M8 :D
Went back to my house and started preparing for the next day, The Asus Commando needed Vdroop and Vcore.
And we took no risk with issulation, I HATE CONDENSATION :)
A littel nail polish from the misses on the Northbrige and Sealtring in excessive amounts :)

Our new crew m8 Raller joined us later friday nigth and he had brougth some old board and the 2 Chilly1 pots we where goint to use :)
The board just wouldent post above 1.6 Vcore so it was a waste of time :(

People where invited to come and join us at 11.00 Saturday and quite a few showed up, not as many as I hoped though.
We charge folkes about 3 $ to help pay expensis and everybody can come and join us.
Spreed the word you know :)

Coffe was made and we started by powering up on air and validating that everything was set up propperly and after that we did a clone to another disk in case we would loose it, and we did so the backup was time spent to save the day :D

benching went Quite good and we managed to boot at 540 fsb and do some Superpi and Pifast :)

Asus Commando Vdroop and Vcore mod.
Intel Xeon 3060
CellSHOCK PC 8000 CL4, 2 X 1 Gb
Corsair HX520 Watt
Swiftech 159cu sponsored by Coolerkit.dk for this purpos :)
MSI 7900 GTO Vcore moddet
MSI 6800 LE Vcore moddet.


Pifast at 547fsb x 9 Strap 1333
http://img45.imageshack.us/img45/283...47fsbx9gj6.jpg

Superpi Strap 1333
http://img19.imageshack.us/img19/892...rpicalcpp8.jpg

3Dmark03 = 29611 Points at 650@950 Mhz core at 1.75 Vgpu and -64 C° core :) IN BAD NEED FOR VMEM. BUT 2. on Hwbot.org with 7900 GTO :)
http://img409.imageshack.us/img409/3544/3dmark03wm0.gif

REALLY GOOD WORK Piotres, -64 Core temp is pretty good in my book :)
http://www.xtremesystems.org/forums/...hlight=piotres

3Dmark01 = 62351 points at 4725 Mhz, 7900 GTO at 940 Mhz core, 767 Mhz Mem.
havent uploadet Yet :)

Thx to ALL OF OCTeamDenmark :D
Homepage will be up soon and an identical Vbullitin forum as her on our belowed Xs :D

MORE pictures for the NEEDY fellow Overclokkers.

http://img254.imageshack.us/img254/5...carpe01ip1.jpg
Preparing out siden on the veranda.
http://img341.imageshack.us/img341/9...carpe06oc4.jpg
We where going to Bench with a 8800GTS with Pelsi cooling, But it suffered coold bug so we had to abort that :(
Voltmeter for Vcore and Vgpu mesuring.
http://img184.imageshack.us/img184/5...carpe02av9.jpg
better safe than sorry :)
http://img181.imageshack.us/img181/1...carpe03ro3.jpg
Olivers Nicely lapped Xeon 3060 by X0tm :)
http://img184.imageshack.us/img184/5...carpe04it7.jpg
http://img248.imageshack.us/img248/1...carpe07wl2.jpg
Prepparing and the exitment is not easy to hide :D
http://img338.imageshack.us/img338/2...carpe08hl9.jpg
http://img253.imageshack.us/img253/9...carpe09kg3.jpg

http://img253.imageshack.us/img253/7...carpe05pf5.jpg
LN2 Dewar with 2 Danish Beers :)

http://img253.imageshack.us/img253/8...carpe10iw4.jpg
We had to move down to the basement because of the cold, it was 20.30 when we moved everything VERY fast :)
http://img253.imageshack.us/content....carpe13qj2.jpg
Piotres GPU pot is VERY heavy :)
http://img413.imageshack.us/img413/2...carpe14qv4.jpg
Dryice action on my beloved MSI 7900 GTO
http://img248.imageshack.us/img248/9...carpe17st2.jpg
Some Dryice to cool the Northbrige.
http://img253.imageshack.us/img253/2...carpe11up9.jpg
Is the graphic card cool enough for you ;)
650@1000 Mzh core was not posible thoug :(
http://img248.imageshack.us/img248/8...t2carpeyb3.jpg

We acualy dident se any inceasing with Ln2.
Dryice was good enough so the board must be the limiting factor.

Looks like you had fun :D

hehe it was VERY nice :)

We dident even have time to get tips and trix from SIOUX :p
Next time strap 1066 and Memset will be utilized :)

More pic, Also some of GFX card ISSULATION :)

http://www.putfile.com/peterkirk/images/102448

Was loadsa fun indeed bro :woot: :banana:

Lookin' good, any internal pictures of the CPU pot, w/wo LN2 in it?
Hmm, really makes one doubt if Xeon 3060 or E6700 is the CPU to purchase..

Did you benefit from the cooling on NB?

very nice results ;) looks like you enjoy'd it guys :toast:

Did you not have condensation at the bottom of chipset heatsink? Nice way of cooling it :)

very nice results
:toast:

Damm nice pic champ:clap: Next time i will enjoy you guys:toast:

Really nice results and pics guys.

regards

Amazing work you guys :toast: Hope we can have OCTeamDK benchsession were we are all together soon:)

Yes , it was really cool ;)

And thanks to hipro5 , for helping us with the vmod ;)

Quote:

---

Originally Posted by kiwi

Did you not have condensation at the bottom of chipset heatsink? Nice way of cooling it :)

---

http://www.putfile.com/pic.php?img=5311073

We gave the Northbrige some nail polish and a bit of sealstring around it :)
At one time condensation formed on the northbrige, ON with MORE DRY ICE :D

Im also very proud about the issulation of the MSI 7900 GTO :)
http://www.putfile.com/pic.php?img=5311141
And then some sealstring on the back and a pice of neopren :)

AND A BIG thx to hipro5 for helping us blind danes in the needy times :D

Quote:

---

Originally Posted by JT from Russia

very nice results
:toast:

---

Thx alot :D

Quote:

---

Originally Posted by giraffen

Damm nice pic champ:clap: Next time i will enjoy you guys:toast:

---

I say we meet up in Viborg at my dads place or at SIOUX/BIG G :D

Quote:

---

Originally Posted by LittleDevil

Really nice results and pics guys.

regards

---

Thx LD :D Now we just need that benctable :)
Btw did you decide on what phone to get :p

Quote:

---

Originally Posted by SIOUX

Amazing work you guys :toast: Hope we can have OCTeamDK benchsession were we are all together soon:)

---

YOU SAID IT :D
Just say when :D we can get Ln2 from Horsens if that is not to long a drive :D?

Nice rig...

Acetone + DI --> funny smoke and "hard" flavor :toast:

Next time try a tomato in Ln2 it's quite fun !

What type of insulation is around the CPU.Its very strange:) Is good and hard to place and clean it up later ? btw good clocks ;P !

wow awesome stuff guys

looks like you were probably motherboard limited there i'd say

Good job ! :toast:, Good idea with NB cooling, it's simply :D

Quote:

---

Originally Posted by Trouffman

Nice rig...

Acetone + DI --> funny smoke and "hard" flavor :toast:

Next time try a tomato in Ln2 it's quite fun !

---

does it explode ? :)

Quote:

---

Originally Posted by mup0

What type of insulation is around the CPU.Its very strange:) Is good and hard to place and clean it up later ? btw good clocks ;P !

---

It is sealstring in roles, they look like the thing you tie your shoes with!
And then you can get it in larger roles, it almost looks like tape :)

It is almost like model wax.

Quote:

---

Originally Posted by dinos22

wow awesome stuff guys

looks like you were probably motherboard limited there i'd say

---

Maybe VMch mod ?

We only ghave 1.85 Vcore, and It migth have been to much :)
The cpu did 4 Ghz on 1.4 Vcore :p
thx :D

Quote:

---

Originally Posted by ZoLKoRn

Good job ! :toast:, Good idea with NB cooling, it's simply :D

---

Thx alot sir :)

We will just get a small Pot for next time :D
Carpe^Diem will get one made at his work :D

Didnt know Denmark had an OC team :)

Nice to see some countrymen having fun :)

Quote:

---

Originally Posted by Nosfer@tu

Enventions from Denmark.
C#,C++,PHP,RubyOnRails,Borland Builder,Delphi,Turbo Pascal, Mach GT+Vapo LS

---

Dont forget Danfoss compressors which alot of people here use :)

nice pics ;)

Nice fsb :eek: 540Mhz.Congratulations.:D It's asus mobo but DFI box.
Drink ln2 cooling Tuborg.:toast:

Quote:

---

Originally Posted by lasse.j5

Didnt know Denmark had an OC team :)

Nice to see some countrymen having fun :)

Dont forget Danfoss compressors which alot of people here use :)

---

We announsed this evvent on tweak.dk, tweakup.dk, hol.dk and Overclocking.dk

But feel free to join us at Hwbot :D Lets change the fact that only Tom Holck and Sioux are known from denmark, Bias_Hjort to but he is Missing in action.

Quote:

---

Originally Posted by PPInDaHouse

nice pics ;)

---

Carpe^Diem has a VERY nice cam :p

Quote:

---

Originally Posted by asterix34

Nice fsb :eek: 540Mhz.Congratulations.:D It's asus mobo but DFI box.
Drink ln2 cooling Tuborg.:toast:

---

Correct :D

Quote:

---

Originally Posted by SIOUX

Amazing work you guys :toast: Hope we can have OCTeamDK benchsession were we are all together soon:)

---

Please PM me Sioux.

Thanks for sharing the pics.

Quote:

---

Originally Posted by Nosfer@tu

Maybe VMch mod ?

---

:banana::banana::banana::banana: yeah :D

Quote:

---

Originally Posted by dinos22

:banana::banana::banana::banana: yeah :D

---

Today my dad and Step mom and my Littel sister will be visiting us, we are going out and eating on some cafe.

Tomorrow Im forced to recreate the garden :(

Maybe the dudes can get some Dryice and we could do some runs saturday :D

Nice setup! Congratz

Nice picks, looks the buiness and great fun.

Is it a stable 24/7 setup? ;)

PRJ

really nice work guys ,, congrats :toast:

Quote:

---

Originally Posted by PRJ

Nice picks, looks the buiness and great fun.

Is it a stable 24/7 setup? ;)

PRJ

---

Dont know, I ran out of Ln2 ;)
But maybe if I had some more :D

wow, great results!

Nice guyes
:toast:


;)

Keep on the god work

:explode::flame:

Thanks guys ;)

We are still trying to push the clocks further

Quote:

---

Originally Posted by Tom Holck

Nice guyes
:toast:


;)

Keep on the god work

---

We are trying to lift the inheritance you created Tom :D
Still benching or just SPEEDING in the cool cars :D ?