a Bad E6750es,but when the IHS Removed ....... !!!

Printable View

04-07-2007, 04:47 AM
K.J.

a Bad E6750es,but when the IHS Removed ....... !!!

http://www.xtremesystems.org/forums/sho … p?t=136776

Because I saw this thread, So I decided to remove IHS

and DONE !

http://jianghanchao.googlepages.com/1.JPG

http://jianghanchao.googlepages.com/2.JPG

I saw that the core is not smooth
so it was very hot (SP2004 1.17V 3.2G 110'C and reboot)

Then I cleaned them

and painted Aritric Silver 5

it is not too hot now , Idle 10'C lower . :)

and SP2004 40'C Lower !!!! (77~78'C)

Ambiant = 24'C

http://jianghanchao.googlepages.com/SP1.18V.JPG

Now it has better performance :)
04-07-2007, 05:00 AM
Jamesrt2004

Nice, Good job :)
04-07-2007, 05:01 AM
I)ickie

Are you talking about the e4300 ihs thread?
You may want to fix the link. I cant see clearly in that pic. was there any solder?
04-07-2007, 05:14 AM
master_gokhan

10 C on air??
04-07-2007, 05:16 AM
dinos22

hi mate so you put the IHS back on now?
04-07-2007, 05:27 AM
K.J.

Quote:

Originally Posted by dinos22

hi mate so you put the IHS back on now?

yes , i put the IHS back

beacause it can't use without IHS (the base of T120/U120/ZALMAN etc. too big , and it cant touch the core)
04-07-2007, 05:32 AM
dinos22

Quote:

Originally Posted by K.J.

yes , i put the IHS back

beacause it can't use without IHS (the base of T120/U120/ZALMAN etc. too big , and it cant touch the core)

there is a way if you remove the intel metal mounting :) :toast: but you have to be careful mounting the heatsink

i've done that with AMD and Sonic Tower and it was amazing how low the temps were :toast: >>> i had like 8-10C Delta temps it was amazing

Here is a pic from the testing days......Opteron 146 under the hammer
http://img224.imageshack.us/img224/1369/setup9ze.jpg
04-07-2007, 06:26 AM
bassie

Nice, 10 degrees is not bad.
04-07-2007, 06:50 AM
K.J.

Quote:

Originally Posted by bassie

Nice, 10 degrees is not bad.

on full load , 40'C lower 11x'C ---> 77'C
04-07-2007, 07:51 AM
Radamanthys

110 under load is too much. Stock Cooling? Nice temps without Ihs
04-07-2007, 08:00 AM
dinos22

Quote:

Originally Posted by K.J.

on full load , 40'C lower 11x'C ---> 77'C

there is still something badly wrong with that CPU man :(
04-07-2007, 08:20 AM
killster1

i wish i could lay my parts out on a table and test like that!
04-07-2007, 08:43 AM
K.J.

Quote:

Originally Posted by Radamanthys

110 under load is too much. Stock Cooling? Nice temps without Ihs

T120 Cooling

and I killed my T120

http://jianghanchao.googlepages.com/system.JPG
04-07-2007, 08:47 AM
K.J.

Quote:

Originally Posted by dinos22

there is still something badly wrong with that CPU man :(

Of Cause I know this

but now it is allready at least not bad....

3.2G 11X'C SP2004 1sec reboot

to

3.2G 77~78'C SP2004 1hours+ Stopped by hand

it's the diffirence
04-07-2007, 08:54 AM
dinos22

oh man shame about T120

hey KJ maybe the temp sensor on the CPU is borked :confused:
04-07-2007, 09:04 AM
K.J.

Quote:

Originally Posted by dinos22

oh man shame about T120

hey KJ maybe the temp sensor on the CPU is borked :confused:

euh ~~ I think it is a little possible ...

but normally it is impossible :D
04-07-2007, 09:10 AM
noel82

good work :woot:

should be that the sensor is not ok...78°C are very high, and 110°C are crazy for a cpu like that...think something is wrong :D
04-07-2007, 02:18 PM
before

Might be an ES CPU which was used for burn-in testing.
04-08-2007, 05:41 AM
Nosfer@tu

Use TAT.

There is iregularities with Core temp and E4300 so why not with 6850 :)
04-08-2007, 01:52 PM
Emillos

..

Good Job.. very good job :toast:

If you're using Core Temp 0.95 to measure the temperature, then try the 0.94 version and see if that's more realistic. It helped on my system :)
But if it rebooted, it has to have been very hot - unless you'd set a shutdown temperature or something?
04-10-2007, 03:00 AM
Tuppen^^

Good job, but still high temps..
04-10-2007, 03:12 AM
Bootup05

Thats gotta be a sensor problem:confused: , how can a CD2 possibly keep living at 110c! Mine can't stand 80 let alone anything higher:eek:

Anyway, nice work with that IHS:)
04-27-2007, 04:38 AM
.Logic

Wow that's extremely hot it has to be a problem with the temperature probe... I mean seriously, 110*C, you wouldn't need to get up from your desk to boil the kettle and make a cup of tea! Anyway, nice job with the removal of the IHS sure looked messy before cleaning :p:
04-27-2007, 04:44 AM
Maviryk

How did you clean up the remaining solder on the chip?
05-01-2007, 02:38 PM
PlatoonSgtElias

So umm u really are happy about losing 3 years of RMA for 10c lesser heat? I mean buy a watercooling set..
05-01-2007, 03:05 PM
makatee

Quote:

Originally Posted by PlatoonSgtElias

So umm u really are happy about losing 3 years of RMA for 10c lesser heat? I mean buy a watercooling set..

cough, cough....xtremesystems.....cough, cough ----> translation is we dont care about warranties
05-01-2007, 03:16 PM
mat128

Quote:

Originally Posted by PlatoonSgtElias

So umm u really are happy about losing 3 years of RMA for 10c lesser heat? I mean buy a watercooling set..

CPUs almost never die... they die from bad manipulations such as bad ihs removal or uncontrolled voltage feeding :fact: :p:

Even if they provided 10 years of warranty on them, they wouldn't get any more valid RMAs, or almost none. :banana: :banana:
05-02-2007, 03:47 AM
G.Foyle

ANd warranty was already void because he didn't use stock cooler. And engineering samples don't have warranty at all.
05-02-2007, 04:13 AM
Nosfer@tu

Quote:

Originally Posted by killster1

i wish i could lay my parts out on a table and test like that!

You can ;)

or buy a bench table from DIMAS or Littel Devil.

Quote:

Originally Posted by xoqolatl

ANd warranty was already void because he didn't use stock cooler. And engineering samples don't have warranty at all.

WRONG!!!!!!!!!!!!

who told you that you lose Warranty because you dont use stock cooler :mad: SLAP THAT MAN! How evil do you have to be when you tell somone that :(
05-02-2007, 04:37 AM
Revv23

lol what did you do to your 120?

BTW that ihs looked terrible before hand! probably one of the worst i have seen.
05-02-2007, 10:46 AM
merlot_14

Quote:

Originally Posted by bassie

Nice, 10 degrees is not bad.

amen
howd you get an es?
05-15-2007, 12:16 PM
GUFY

How did you clean up the remaining solder on the chip? Please tell me as soon as you can. Thx.
05-15-2007, 01:08 PM
overcrash86

Quote:

Originally Posted by GUFY

How did you clean up the remaining solder on the chip? Please tell me as soon as you can. Thx.

l've just little lapped the core after IHS removing...

some pic's/videos here and here
05-15-2007, 02:06 PM
jabski

nice work overcrash86 :)
05-15-2007, 03:12 PM
Cupcake

Quote:

Originally Posted by merlot_14

amen
howd you get an es?

;) Wal-Mart
05-16-2007, 06:39 AM
GUFY

Thx for info overcrash86.:)
05-20-2007, 12:02 AM
ColonelCain

Quote:

Originally Posted by PlatoonSgtElias

So umm u really are happy about losing 3 years of RMA for 10c lesser heat? I mean buy a watercooling set..

Well, idk, overclocking your cpu kinda voided your warranty already, so why not?
05-20-2007, 12:46 AM
overcrash86

Quote:

Originally Posted by PlatoonSgtElias

So umm u really are happy about losing 3 years of RMA for 10c lesser heat? I mean buy a watercooling set..

ES -> no waranty

never try this on a BOX CPU ;)

All times are GMT -8. The time now is 05:17 AM.

XtremeSystems