Printable View
just got E6600 L647G425
first time i see a G stepping
Orthos stable 3600Mhz @1.45v
FSB wall around 505
I'll do more test and keep you updated....seen to be a nice candidate for the next dryice run :toast:
http://public.ntic.qc.ca/Boogotop/E6...00%20l647g.jpg
http://public.ntic.qc.ca/Boogotop/E6...20l647g425.jpg
http://public.ntic.qc.ca/Boogotop/E6600/box%20l647g.jpg
Nice, how are the temperatures?
TAT give me around 50celcius and Asus Probe around 58celcius both @ full loadQuote:
Originally Posted by Nmbr1Ballr
can't test coretemp....i run on Vista...tommorow i will install XP SP2 to make some test :toast:
nice chip :)
core temp 0.95 work on Vista
SL9ZL?:stick:
60.1°C
1.187V-1.325V
yeah, its a higher voltage CPU... don't know, lets see if this CPU can overclock aswell as SL9S8 witch is 0.850V-1.3525VQuote:
Originally Posted by cadaveca
http://processorfinder.intel.com/det...px?sSpec=SL9ZL
3600mhz @ 1.45v Idle and full load....little bit confuse about the real temp :confused: :D http://public.ntic.qc.ca/Boogotop/E6600/temperature.JPG
http://public.ntic.qc.ca/Boogotop/E6...#37;20load.JPG
I tihnk that it seems right. seem like they have done something to cpu so that it only draws maximum power rating @ voltage designated in COreTemp. A listing of Vdroop using digimeter to PWM might be usefull...
Not BAD , i think !! :)
my E6600 L628B runs Orthos at 3600mhz @ 1.33v (watercooled)
http://img180.imageshack.us/img180/5...00forumcy9.jpg
and boot form bios 540 fsb 1:1 (didnt try more)
http://aycu05.webshots.com/image/104...0297798_rs.jpg
http://aycu02.webshots.com/image/110...1018501_rs.jpg
http://img248.imageshack.us/img248/4144/540fsbfosk1.jpg
but with aircooling its a litle HOT .
But your Chips looks nice , we are waiting for dry ice results then :D
regards
@Boogotop :
any blend test stable pic ?...I have the same spec with you but I can't get blend test stable >3hr.
@mascaras: can you show me your core temp ?...
Quote:
Originally Posted by 911us
no...just tried small...next night i will do blend and post screen
the temps with coretemp are a litle lower than with TATQuote:
Originally Posted by 911us
http://img255.imageshack.us/img255/6...mps3800ds2.jpg
regards
dude what are u using for that chip, those temps are pretty cool ....TEC mayby ?Quote:
Originally Posted by mascaras
http://public.ntic.qc.ca/Boogotop/E6...re%20prime.jpgQuote:
Originally Posted by 911us
150€ watercooling Kit :DQuote:
Originally Posted by Solarfall
- CPU: NexXxos XP Silver
- Radiator :Airplex Evo 240mm ou Black Ice Stealth
- Pump :Eheim S1000 Station
- Fans : 2x Enermax Double Ball Beraing 120mm
http://img443.imageshack.us/img443/974/00074553ub8.jpghttp://img444.imageshack.us/img444/7...anxx478th6.jpg
http://img410.imageshack.us/img410/6892/151191sy3.jpghttp://img258.imageshack.us/img258/8...0019463ol1.jpghttp://img258.imageshack.us/img258/8...0019463ol1.jpg
http://img208.imageshack.us/img208/3...3070529nj6.jpg
:toast:
well it's cpu only kind of loop so that explanes the low temps, i watercool my 8800gtx too, and it's in the same loop with my cpu.
let me guess you live in europe, very german kind of loop, not saying it's a bad thing, just an observation i've made over the years while i've been into computers. small diameter tubing, restrictive rads.. etc
btw have the same block( retired) and rad (second rad in my rig)
yep i live in portugal
i prefer small diameter tubes like 8/6 than 10/8 or higher
when i had C2D E6400 and X1950XT with same wc kit on same loop i had pretty much same temps
http://aycu02.webshots.com/image/492...4151418_rs.jpg
Now im only watercooling the CPU beecause 8800GTS stokcooler dont make much noise and its eficient (45c Idle)
http://img252.imageshack.us/img252/9167/45cbn7.jpg
regards
This is a newer e6600 right? I'm considering getting one, but have read the newer chips don't clock all that well. What do you guys think?
yes this really seems to be the case with these newer C2D chips.Quote:
Originally Posted by PanteraGSTK
well the first E6600 CHips ( week 24 & week 25) were A LOT WORSE , some of them dont even run 3400mhz (no matter what voltage used) , for what i see here at least this new ones run 3600mzh@1.45v Orthos stable , i think its not so bad !!Quote:
Originally Posted by PanteraGSTK
:toast:
your VID is really good,just 1.23v.I think that is why you can go high without using a lot of voltage.Quote:
Originally Posted by mascaras
Nice !...I can't even do it for 4 hr+.Can you tell me your bios voltage settings ?..Quote:
Originally Posted by Boogotop
Mine is:
_Vcore : 1.4725v (1.44 v real) 6600 week 37A@3600Mhz (400*9) on watercool
_VFSB : 1.35v
_VNB : 1.35v
_VDIMM : 2v (OCZ Flex @800 4-4-4-12 4 30 10 10 10 11)
_All VDEF DDRII : AUTO
_VSB (SATA,PCI-E) : 1.6v
_VSB : 1.075v
http://i163.photobucket.com/albums/t...p/IMG_0924.jpg
I thought it is cause of the board.Something wrong with my commando.
911us my guess is that you have found the limits of your cpu and thats why you are not able to make your system stable.
The limit stability is about 37xx Mhz on watercool. I am doing fine with orthos large test at 3600Mhz but not the blend test.Quote:
Originally Posted by Solarfall
http://i163.photobucket.com/albums/t...untitled-2.jpg
i can run 3dmark 2k1 @3925mhz 1.6v and sreen @ 4GHZ on this new 6600 L647G....not bad....o/c more than my L637A and approx same as my L629B
with mine L628B
superpi 1M @ 4150mhz @1.6v(real)
max screeshot @ 4250mhz @1.6v(real)
http://pwp.netcabo.pt/peml/4250.jpg
regards
i will tell you that soon....all is AUTO except vcore and VDDRQuote:
Originally Posted by 911us
my L631F needs about 1.58v in bios to get 3.7GHz stable: and about 1.52v in bios for 3.6GHz .. on water...
http://i121.photobucket.com/albums/o...ot00451212.jpg
speedfan shows 1.49v ?!?! :
http://i121.photobucket.com/albums/o...Shot0035-1.jpg
Quote:
Originally Posted by theteamaqua
vdroop???
do you've tried Asus Probe?
all the Asus boars i've tried are *king* of vdroop
here's a link to asus probe if you need it. it supports Win2K / WinXP / Win2003 / WinXP 64bit / Win2003 64bit / Vista 32bit / Vista 64bit
yeah asus boards r king of vdroop lol not even gigabyte come close to asus's droop.. btw i remember PC probe shows
Asus PC Probe shows 1.57v both load and idle , and yeah i did the pencil mod, but not sure whether i done it correctly or not
http://i121.photobucket.com/albums/o...Shot0001-4.jpg
Boogotop, where did you buy that chip from?
i've buy it locally here in Quebec...my friend have a computer store and he ordered 2 chip from the distrubutor and both are L647G425Quote:
Originally Posted by slim142
Wow that is horrible..Quote:
Originally Posted by Boogotop
My L628B167 runs 3600 mhz @ 1.36v with a Big Typhoon and silent fan. ;)
it's not too bad...alot of 6600 just can't hit 3.6ghz stableQuote:
Originally Posted by fhpchris
this cpu o/c same as my L629B and better than my L637A
Mines wont run stable at 400mhz FSB x9. I need 1.60 to boot at 400mhz and is not stable.
Really bad batch
I can easily boot 400x9 but orthos will fail almost instantly 1.58V load:(
L629B367
i thought the B chips r good
heres something to blow your mind i just bought 16 conroe E6600s and i just got 6 in today mixed with thesehttp://insomniagamingcenter.com/pics/G4.jpg and http://insomniagamingcenter.com/pics/G2.jpg
not sure how they over clock or not but if i see any more i will post still building >.<