Lian Li V1000 !!! Let The Mod Begin !!! More Photos

I were have V1000 for witing a small cool modding long time..So i started it..Here is the start.. İ hope you like it...

http://img65.imageshack.us/img65/3622/lianl304ns4.jpg

Let The Mod Begin

http://img458.imageshack.us/img458/1962/mod1cj7.jpg

http://img406.imageshack.us/img406/5252/mod2hz4.jpg

http://img406.imageshack.us/img406/6383/mod3yz8.jpg

http://img101.imageshack.us/img101/7415/mod4vg4.jpg

http://img510.imageshack.us/img510/5284/mod5nd1.jpg

http://img140.imageshack.us/img140/4228/mod6yi3.jpg

İ am gonna add more photos :toast:

can you tell us what you have planed to do, or is it a secret?
allso it whould be nice if you chould tell us what kind of hardware are you gonna use in this mod.?
water or air cooling?

I always love v1000/v2000 mods :) :)

Just one small question: isn't that rear fan blowing the wrong way? As it is now, it's blowing air into the case.. I thought it was an exhaust fan there.

guys ı am gonna change all the fans in the case and i am planning for the fan controller (special) and conna finish cutting tomorrow. v1000 is really cool case. gonna do air cooling for CPU with big typhoon with different fan and water cooling for VGA .. wait and see:cool:

Quote:

---

Originally Posted by sTaBZz

I always love v1000/v2000 mods :) :)

Just one small question: isn't that rear fan blowing the wrong way? As it is now, it's blowing air into the case.. I thought it was an exhaust fan there.

---

no, they designed it to work like this:http://www.performance-pcs.com/catal...ducts_id=20412

but you can do it how you want. i use it as an exhaust but i am in a v2000b+2 with phase change cooling.

Quote:

---

Originally Posted by jimmyz

no, they designed it to work like this:http://www.performance-pcs.com/catal...ducts_id=20412

but you can do it how you want. i use it as an exhaust but i am in a v2000b+2 with phase change cooling.

---

only the plus was that way i do believe. My old PC-V1000 had the fan setup as an exhause fan originally.

Quote:

---

Originally Posted by lowfat

only the plus was that way i do believe. My old PC-V1000 had the fan setup as an exhause fan originally.

---

so true .. i wasn't even thinking about the lack of upper fan on the regular.

btw. if you look around that site the +2 is $10 cheaper than the regular? and that isn't the first time or site i have noticed it. and for the record i have always had good luck with that site.

My PV-V1000 is setup to have the rear fan act as exhaust, plain jane version. I love this case, simple and aethetically pleasing. Makes for a good canvas for skilled modding too.

Quote:

---

Originally Posted by KingThot

My PV-V1000 is setup to have the rear fan act as exhaust, plain jane version. I love this case, simple and aethetically pleasing. Makes for a good canvas for skilled modding too.

---

So I've heard. The guy i sold mine too is quite excited to start modding his.

this is not plus II model one
This one is http://img522.imageshack.us/img522/5528/pcv1000bva4.jpg

İ cutted the side panel.. Now i am cutting the top side of the case...

Ok guys cutted the top panel finally i add more photos...

http://img338.imageshack.us/img338/6890/st2ls5.jpg

http://img530.imageshack.us/img530/1733/yeniai7.jpg

http://img506.imageshack.us/img506/9231/yeni1in5.jpg

http://img266.imageshack.us/img266/6321/stjz0.jpg

http://img338.imageshack.us/img338/6890/st2ls5.jpg

http://img253.imageshack.us/img253/7901/tmpg6.jpg

http://img252.imageshack.us/img252/4381/tm2qa5.jpg

http://img338.imageshack.us/img338/34/tm3vo9.jpg

i ll add more photos..

Gokhan really nıce work really nıce case&mod:toast:

Gökhan what will u mount there? radiator? fans?

bu arada ilk mesajım sana oldu :toast:

i am thinking Two Blue fans for top side.. Gonna stick them in 2 days...
İlk mesajın için tebrikler.. :toast:

May i know what did you used to fix the piece of acrylic on to the top panel ? Thanks

i dont know may be same slicon i used on side panel or screws tomorrow fans coming for top panel... gonna do it.

did some nice work
http://img138.imageshack.us/img138/3...1058vb9un4.jpg

http://img220.imageshack.us/img220/7...1060dl8px2.jpg

http://img149.imageshack.us/img149/7787/stri1.jpg
http://img151.imageshack.us/img151/9375/st2kw8.jpg
http://img151.imageshack.us/img151/7079/st4lt2.jpg
http://img151.imageshack.us/img151/6410/st5kp2.jpg
goona finish soon

Looking good I like what you did with the top.

its gonna look really cool when the fans ligts up :)

Cables Rolled;
http://img219.imageshack.us/img219/4/kablo1gg7.jpg
http://img219.imageshack.us/img219/4250/kablo2cx6.jpg

looks good m8 :D

don't you guys think it allways looks sooo sweet when you've had your cables sleeved and none of the hardware is in :D

thats right.. :) i am goona put some hardware for the ligts up... İ am wondering how its look;)

Somebody turn the lights on. :)
http://img144.imageshack.us/img144/1706/lghts1rl7.jpg
http://img352.imageshack.us/img352/4195/lightsjl0.jpg
http://img86.imageshack.us/img86/560/lights2fv5.jpg

I see you have 2 revoltec fans. Could you tell something more about them like for example; are they silent or a bit loud?

blue fans are queit and nice light they give.:toast:

nice way to cut the fans holes

Thanks for the info cause I might consider buying 2 revoltec 12mm led fans too :)

Very nice job you're doing there mate ;) I'm looking forward for the completed case :cool:

Did some one asked for night shott. Here we go..
http://img172.imageshack.us/img172/3843/gecexj7.jpg
http://img260.imageshack.us/img260/4861/gece1ql5.jpg
http://img172.imageshack.us/img172/2043/gece2uc0.jpg
http://img260.imageshack.us/img260/2250/gece3yj9.jpg
this is only one led. Gonna add to more.:toast:

cool case dude, waiting all hardware mounted pics ;)

Awesome waiting for more :woot:

Please.. please i need more photos :d jejeje yeah

dont worry guys gonna finish soon..:toast:

I see all these pcs in the background, where do you work?

computer shop in a little tıwn in marmaris. Actuaaly its a technology shop cameras and stuff.. this is a hobbie for me:)

Nice, keep it coming :)

i am thinkin few more things gonna add them soon

gj!

but the top window isn't quite centered :(

because i am gonna add there a another led...

More pictures please :D

i am gonna add more photos mate. tomorrow..

Very nice, great job :clap:

Really nice case there ;)

regards

thanks for regards. i am looking for two things for top sides. hope i mount it today and waiting for hardware...

Ok guys long time no working on V1000 i started today and try to finish it. İ was gonna put a water cooling inside but inside is little it was looking very busy inside. İ tok it out and replaced a stock fan. İ am working on something. Gonna try on it soon.Here some pics.

http://img461.imageshack.us/img461/9071/64489108ei9.jpg

http://img250.imageshack.us/img250/4526/87173381lw6.jpg

http://img250.imageshack.us/img250/9484/58021716hr8.jpg

http://img486.imageshack.us/img486/2408/19260714oz9.jpg

http://img59.imageshack.us/img59/9211/80016235ql4.jpg

http://img358.imageshack.us/img358/3529/79756114ed9.jpg

Gonna add night pics later.

i had to put fans outside of the case :)

Nice Mod! Wish I had the money to get a decent case to mod. But instead, im stuck using a trashed Antec SL3000B case that I punched into submission from pure rage (dont make me angry......you wouldnt like it when im angry) and I had to resort to using Duck tape and string for my mod (oh, and drilling of course).

Soon, cardboard.

I cannot wait to see your final production. It will give me some insight.

Great job, looks sweet

Is that going to be the final hardware in the case?

Quote:

---

Originally Posted by master_gokhan

i had to put fans outside of the case :)

---

really nice clean looking case you have there, i just wish that you had made it into a watercooling instead of air, allways liked the way that WC:ed cases look like.
btw what watercooling parts were you planing to use before you decided to trash that idea?

Quote:

---

Originally Posted by SepheronX

Nice Mod! Wish I had the money to get a decent case to mod. But instead, im stuck using a trashed Antec SL3000B case that I punched into submission from pure rage (dont make me angry......you wouldnt like it when im angry) and I had to resort to using Duck tape and string for my mod (oh, and drilling of course).

Soon, cardboard.

I cannot wait to see your final production. It will give me some insight.

---

actually i allways admired people who make there crappy cases look like a piece of art. and that's what i think modding is all about, making some piece hardware really stand out or improving it's performance. and if you have not modded anything in your life a crappy case is a perfect way to learn.
so pick up a dremel and show us what your made of :toast:

Looks great good job.:D

Looks like you did a great job. :cool:

I know you said that you had to put the fans outside, but is there really absolutely no way to get them inside? I can't see for myself from the pics, I just think it would look even better with them inside.

@ Solarfall

Yeah, I guess I will get the dremel (even though it was made in the 80's and its a piece, but I will use it anyway). Although, I am just gonna use whatever money I have in order to get another case (small form factor) as my PC hardware i have in my system is too good for this crap case! lol.

I cannot wait to see more pics!

thanks guys.. İ ll make it more clean.but i am thinking put water cooling inside again may be on the floopy disk driver...

nice job..I like it ;)

believe that if you would put the fans inside could be better;)

i knew man.. İ am gonna find a way for it..

ok guys we said fans was looking bad outside may be night oics change your mind.:rolleyes: İts not finished yet there is a competition in our forum.. İ had to make it ready for that.. Gonna add water cooling inside Now enjoy the pics.
Code Name Blue Storm:D

http://img242.imageshack.us/img242/9052/10128319tw7.jpg

http://img101.imageshack.us/img101/1456/81633526rg8.jpg

http://img242.imageshack.us/img242/4311/10826619gf8.jpg

http://img178.imageshack.us/img178/3058/59032185kt2.jpg

http://img178.imageshack.us/img178/9774/67151637xh9.jpg

http://img408.imageshack.us/img408/6783/17179198bt2.jpg

http://img408.imageshack.us/img408/2346/24764134yh6.jpg

http://img408.imageshack.us/img408/8098/48224191sq3.jpg

http://img412.imageshack.us/img412/1163/73874954ye8.jpg

More Picssss :banana:

http://img412.imageshack.us/img412/2524/10tk6.jpg

http://img291.imageshack.us/img291/6229/12ab1.jpg

http://img248.imageshack.us/img248/3717/13uc8.jpg

http://img133.imageshack.us/img133/1504/15oh5.jpg

http://img133.imageshack.us/img133/8762/18cs8.jpg

http://img92.imageshack.us/img92/3406/19ze8.jpg

http://img180.imageshack.us/img180/6089/17sw0.jpg

http://img180.imageshack.us/img180/3812/20uf2.jpg

OMG that looks very nice, well done on a good job.

Really like how the fans stick up like that. :D

oh.. and:

http://img341.imageshack.us/img341/9...4yh6nr1.th.jpg

:D

i knew :D gonna add water cooling :)

Guys i am so sorry but i sold the case...

BAN him PLEASE :P

lol

hope u at least got a price which covers ur work

yess meyt i sold it for good price...

Quote:

---

Originally Posted by master_gokhan

yess meyt i sold it for good price...

---

nice "double" job :D

Quote:

---

Originally Posted by master_gokhan

yess meyt i sold it for good price...

---

Its even better if you sold it, now buy a V2000 and do the same mod! :D or try something different.

i am thinking mod my Lian-Lİ G-70 again İ ordered a new side panel and a top panel.Got an idea.:)

Wow.. that's real workmanship skill

Very nice and clean

Guys i sold the case you know. But the guy who buought the case he want a water cooling..And i sold him a my gigabyte and mount it,so want the share it with you. İ need a uv liquid...

http://img396.imageshack.us/img396/3669/siviyn0.jpg

http://img396.imageshack.us/img396/7025/sivi2af7.jpg

http://img337.imageshack.us/img337/7118/sivi3hg4.jpg

Congratulations gökhan.It's my favorite G-70,but V1000 is wonderful to do mod.

Looking good! :toast:

Just need an uv liquid. İ am thinking on dark green..

I love how you spend huge time and money on completely customizing your case, but you used the stock intel cooler at first, and then a cheap watercooler after that

Nothing wrong with that, I guess this simply shows how different people have different priorities

thats sick man! great job!

Nice job!!

thanks for regards guys.First İ sold the case with stock intel cooler and than the guy who bought the case he bought my water cooling.

How much did you make off it then?