abit ab9 quad gt voltage readout points

hi folks

has anybody already found voltage readout points on the abit ab9 quat gt?

received the board yesterday and want to solder some wires before i install the board into my case.

i'm looking for pics of readout points: vcore, vmch, vdimm, vtt

don't know yet hows the voltage drop on this board. will figure it out as soon as i know the readouts. drop mod might be of interest too ...

hipro?

THANKS

Quote:

---

Originally Posted by fgw

hi folks

has anybody already found voltage readout points on the abit ab9 quat gt?

received the board yesterday and want to solder some wires before i install the board into my case.

i'm looking for pics of readout points: vcore, vmch, vdimm, vtt

don't know yet hows the voltage drop on this board. will figure it out as soon as i know the readouts. drop mod might be of interest too ...

hipro?

THANKS

---

Here is the points http://prohardver.hu/p.php?mod=40&id...tart=463&len=1

Quote:

---

Originally Posted by syn7h37ic

Here is the points http://prohardver.hu/p.php?mod=40&id...tart=463&len=1

---

This is the pictures.

Any knows vdrop mod for this board ?

Quote:

---

Originally Posted by Hazzan

Any knows vdrop mod for this board ?

---

Good luck mate. the VT1115M is under NDA and a number of us have tried to get hold of it, with no avail. Either someone manages to get a copy or we're stuck with only BIOS mods.

Johnny Bravo, can you confirm the readout points posted by syn7h37ic?

dont understand hungary and don't want to solder unneccessary cables to my board!

just want to double check before heating up my soldering iron ...

THANKS

Quote:

---

Originally Posted by fgw

Johnny Bravo, can you confirm the readout points posted by syn7h37ic?

dont understand hungary and don't want to solder unneccessary cables to my board!

just want to double check before heating up my soldering iron ...

THANKS

---

Will get something up tomorrow nite, for tonite I'm otherwise detained :D

Quote:

---

Originally Posted by Johnny Bravo

Will get something up tomorrow nite, for tonite I'm otherwise detained :D

---

so, wish u a nice evening/night! ;)

THANKS

up

Any vmod ?

where is the voltage readout points for ddr2 voltage?
thanks

This is a general picture, valid for all DDR2 motherboards.
If you need a permanent spot, do a contingency check (0 ohm) from this point to capacitors at theside of the dimm slot and solder a wire to it.

http://www.nordiccrew.com/crotale/vm...m_read_out.jpg

(Up in this picture is up on regular Intel boards, but some might have the slots reversed)

guys, anybody knows some vmod for this board? (NB is the more important)
i sent pm to hipro and he works on it, but if somebody have some info, or pics, or everything else about the QuadGT vmods, please tell here :toast:

Vmods so far

http://www.itsjohnnybravo.com/Overcl...QuadGT/ICH.JPG

http://www.itsjohnnybravo.com/Overcl...uadGT/vmch.JPG

http://www.itsjohnnybravo.com/Overcl...0readpoint.JPG

Crotales vdimm should work fine on this board too ;)
http://www.nordiccrew.com/crotale/ab.../ab9_vdimm.jpg

Hoping to have vcore sorted soon along with a vdroop, for vcore measurements just try the side of the ceramic SMD capacitors around the cpu socket - one side will be grounded and the other will be vcore.

:woot: thank you Johnny Bravo, I hope they works fine!

I Vmod Others Point (similar ) , Spécial Thank a Shamino and Learn :toast:

http://boblemagnifique36.free.fr/Har...GT/QuadGT2.jpg

http://boblemagnifique36.free.fr/Har...T/QuadGT11.jpg

any v-mod for the v-drop?

Quote:

---

Originally Posted by ztop

any v-mod for the v-drop?

---

Some news? :slobber:

hipro help us :D

I look for vcore mod and hmmm

Hipro say vcore mod from IN9 Max might be the same for Quad GT.

For me this is not the same :rolleyes:

Check this foto : this is IN9 Max vcore mod

http://www.thelab.gr/images/Hipro5/A...re_Mod_IN9.jpg

What about this guys ?

The same or not ?

Regards
Martin

I'll have vdroop and vcore up before the nite :) Just waiting for the cable back for my camera

Vcore

http://www.itsjohnnybravo.com/Overcl...adGT/vcore.jpg

Vdroop

http://www.itsjohnnybravo.com/Overcl...dGT/vdroop.jpg

Don't try to completely eliminate vdroop it's needed for the cpu to function normally but I've been able to reduce it to less than 10mV ;)

Enjoy

John

Quote:

---

Originally Posted by Johnny Bravo

Don't try to completely eliminate vdroop it's needed for the cpu to function normally but I've been able to reduce it to less than 10mV ;)

Enjoy

John

---

Great vmods Johnny :toast: , can u put some more info abut why is necessary to have some small vdrop?

Man :D Very, very big thanks for this mod's.



Martin

Quote:

---

Originally Posted by Misko

Great vmods Johnny :toast: , can u put some more info abut why is necessary to have some small vdrop?

---

Hey Misko - you'll find all you need to know right here:

http://www.thetechrepository.com/showthread.php?t=126

Quote:

---

Originally Posted by Johnny Bravo

Don't try to completely eliminate vdroop it's needed for the cpu to function normally but I've been able to reduce it to less than 10mV ;)

Enjoy

John

---

I am running out of VR. Can you measure the actual resistans of your VR only when you have about 10mV drop?

Thanks in advance!

iirc 330ohm will be pretty good for what your asking mate ;)

The Vcore readout point from syn7h37ic is not correct

Here the right one :

http://img180.imageshack.us/img180/665/vcoreso4.jpg

any one have CPU VTT mod ??? Pls tell me !

see post 13

Quote:

---

Originally Posted by Johnny Bravo

see post 13

---

Vol VTT is same Vol FSB or vol CPu VTT ??????

Quote:

---

Originally Posted by thriller99

Vol VTT is same Vol FSB or vol CPu VTT ??????

---

sorry what?

Quote:

---

Originally Posted by Johnny Bravo

sorry what?

---

i want mod CPU VTT so that improve FSB OC ability !

n mod Vol VTT are same CPU VTT vol or FSB vol !

Thanks for the help johnny (and everybody else :))