Printable View
http://img252.imageshack.us/img252/7...1167di1.th.jpg
http://img128.imageshack.us/img128/1...1168ws9.th.jpg
http://img252.imageshack.us/img252/8...1170ol4.th.jpg
Finally, my Brisbane 4000+ arrived.
And the best close shot I've ever made with that cpu photo.
0701 :D . You'll have to oc this baby, we don't care if it's noisy :p:
http://img295.imageshack.us/img295/6...1171op4.th.jpg
New heatsinks as well.
The two Ninja are for my quad FX and the ... small one is for Brisbane 4000+... as the Brisbane is going into 2U... but I could temporarily use Ninja on Brisbane...
:YIPPIE:Quote:
Originally Posted by alucasa
DO IT DO IT!! :banana:Quote:
Originally Posted by alucasa
http://img264.imageshack.us/img264/1...1174sk4.th.jpg
Well, I will see what I can do. Need to find some RAM first... Don't have good one left to spare though. Good ones just went into Merom rig.
http://img297.imageshack.us/img297/4...1175hd9.th.jpg
That doesn't look right.
Anyway, the only spare ram I have is an OCZ value 512 ram stick.
Wow that one is different from the one I got today. I got the classic "assembled in malaysia". My 4000 X2 stepping is CAAFG 0653UPBW. Gotto wait for ram and mobo before overclocking.
Booting successful.
Will need to install xp64 first before anything.
http://img168.imageshack.us/img168/1...1177ix9.th.jpg
less talkie, more overclockie
Bah, installing OS now.
For quickie, it hit 2800 real easy in BIOS though.
http://img64.imageshack.us/img64/9535/brisbanerm6.jpg
There you go. I will try to push a bit higher.
Do you want a cpu-z validation link though?
Getting it hooked on net can be ... a little tricky. I will have to make a wire long enough that will reach my router.
The brisbanes are looking liek awsome clockers. I predict 3.2GHz for the 4000+ considering Iv seen 3600's already hit 3.0GHz.
*EDIT* Up some voltages alucasa. you can do it :P
*EDIT #2* Fellow Torontonian, where did you pickup that cpu? was it locally?
It looks to be better clocking afterall than 90nm. 2700-2800 was all I ever got from 8 X2's before. Congrats. Lets see it with 1.55V and hope for 3.2-3.3.
Very unstable at this point.
But here.
http://img158.imageshack.us/img158/696/brisbane2kv6.jpg
HT link 1475?
you may want to reduce your HTT multiplier. You're running at a high and likely unstable HTT speed.
Yep.Quote:
Originally Posted by brentpresley
drop the HT multi :D, use something different than coretemp (16/17° are too low:p: )
My ram is a cheap 512 ram (Value ram and I bought it when it was in clearance sale). I was unable to do better timings on RAM.
Pardon? better timings? Just use a 180mhz/166mhz memory divider, drop your HTx to 3 and lets see what the cpu maxes at ;)
By the way, the CPU does seem to run much cooler. I changed the cooler to the silverstone one and it will runs at 16c, not to mention the cpu heatsink is cold to touch.
I was trying to get a better SuperPI socre. 32 seconds on 1M wasn't very impressive.Quote:
Originally Posted by SOLDNER-MOFO64
This is making me somewhat sad and jealous that I can't get any brisbanes in Switzerland:(
This was done on stock cooler. Silverstone heatsink couldn't fit in the 2U.
http://valid.x86-secret.com/show_oc?id=165626
It's the stable one.
http://img251.imageshack.us/img251/9...isbane3na1.jpg
http://img251.imageshack.us/img251/3...isbane4vw1.jpg
nice m8 :)
any particular reason for the half multi?
10.5 was max I could choose. :p: and 10x kept giving me blue screens.Quote:
Originally Posted by SOLDNER-MOFO64
I hope to get dual channel ram next week or so for the rig.
Good work alucasa :toast:
Nice CPU you got there :) After all this OCing try to go down to 1.0V and find max stable frequency ;)
:clap: :clap:
Is that much Vcore absolutely necessary? You may be better off with a 90nm CPU then :p:
http://img329.imageshack.us/img329/8521/cpu3111jz1.jpg
Yes, I am probably better off 90nm or even 130nm.Quote:
Originally Posted by s7e9h3n
Or - even 1 µm?
Maybe you should get a socket939 then :DQuote:
Originally Posted by s7e9h3n
http://img76.imageshack.us/img76/129...128vfj8.th.jpg
http://img485.imageshack.us/img485/5...264vum2.th.jpg
Did lowering the HTT and ram mhz have any positive impact on the OC?
Does it really need that much voltage to get a stable 2.88ghz? I thought the 65nm chips can hit 3ghz on relatively low voltage. But anyways, nice work.Quote:
Originally Posted by alucasa
I didn't need to. For some reason, I upped vcore too much. 1.4vcore was probably more than enough.Quote:
Originally Posted by awdrifter
One thing I noticed with my 3600 Brisbane is its ability to handle voltage. Seems to scale much better with the volts than Windsor does. My 3800 Windsor will do 2.8ghz with 1.5v but nothing more, and going to 1.5v over stock only netted me roughly 75 to 100 mhz.
But Brisbane scales pretty well. Up the volts and up your clock.
Also Alucasa you're right about Brisbane running cool. Even when I was torturing it at 1.675v it ran much cooler than my Windsor...
Ply
http://www.ripping.org/database.php?cpuid=543 ;)Quote:
Originally Posted by alucasa