Adata Chips? <=what?

Printable View

02-06-2007, 10:52 AM
ghosty1234

A-Data PC6400 Vitesta EE // D9GCT // Adata Chips? <=what?

lo guys:) my 1.st post here^^

I just ordered A-Data PC6400 Vitesta Extreme Edition (EPP) 4.0-4-4-12 @ 2.0V Micron D9GCT (B6-37E) for testing.

Does someone have experience with this babies @1:1 devider, based on a 975X Chipset Mainboard?

I do with my G.Skill 6400 HZ´s up to 460 @1:1 @4,4,4,12 with 2,65 Vcore with GMH chips on it. Can i expect the same results? better or worse?, what do you think? Board in the sig.

best regards and thx for replies.

EDIT:

Just got a reply. Maybe i even get the RAM with "Adata" chips??!!! rebadged?
WTF is this?
http://www.forumdeluxx.de/forum/atta...1&d=1169253168
02-06-2007, 12:13 PM
starostise

I have adata vitesta EE 6400 2GB
it s rebadged D9GCT ICs too, same as yours

with P965 i got ~540mhz 4-4-4-12 superpi 1M benchable with 2.4v
02-06-2007, 01:51 PM
ghosty1234

Nice, thank u m8t.
02-06-2007, 02:55 PM
Roger_D25

So did you get them yet ghosty1234 or are they still on the way? I'm cuious to see how they work for you? Also where did you get them from, any change your from the States? Just curious because I can't find any Adata EE modules anywhere in the US!
02-06-2007, 04:52 PM
dexx

To anyone who manages to get these, please post where you bought from.
02-06-2007, 06:23 PM
xs64

i have 2x1Gb Adata EE PC6400
Dont know what is the chip inside , it runs @ 400 4-4-3-11 1.9v 24/7
And i bought in Germany
02-06-2007, 07:56 PM
Roger_D25

xs64,
Thanks for posting about your Adata RAM, much apprecaited! Since I posted earlier I've been researching, it seems to be quite easy to get them anywhere but in the US, lol!
02-06-2007, 11:41 PM
ghosty1234

Good morning Roger D25,

I orderd in Germany here!
They are still on the way. They come Thursday or Friday. Then i report my results here.

btw: I just dont do deviders or something like that. I wanna test with my Board in the signature @1:1.
I´ll try to do at least 467 with 4,4,3,8 @PI 1M. I will see it...
With my HZ´s i do up to 460 @1:1

best regards...
02-07-2007, 05:54 AM
Benny Lodewijk

I have tested it...

http://img.photobucket.com/albums/v6.../adata800c.jpg

http://img.photobucket.com/albums/v6...pi8m44412c.jpg

http://img.photobucket.com/albums/v6...pi8m44412c.jpg

http://img.photobucket.com/albums/v6...pi8m55515c.jpg
02-07-2007, 09:43 AM
Roger_D25

Benny,
Is there any chance that you have pulled the heatspreader yet on those modules, from your results I would assume their D9's but some of these other IC's have started to do pretty well! So pull those spreaders and let us know ASAP, lol!
02-07-2007, 11:20 AM
ghosty1234

Tomorrow my babies will come.
Then i test some 1:1 power on the 975X Chip.

regards;)
02-07-2007, 11:42 AM
xs64

Benny ,
Is your Ram is AD or MI at the label ?
I have AD and cant run over 500 :(
02-07-2007, 06:31 PM
Benny Lodewijk

The chip labeled with ADATA. I'm not sure this is Micron, also the memory don't like voltage > 2.3 volt. I think it's elpida or promos or aeneon
02-07-2007, 08:48 PM
starostise

i have these:

1. ADATA VITESTA PC6400 CL5 2GB

M2OAD6G3I4170I1E53
ADQVE1A16
10*10mm ICs

http://starostise.free.fr/overclocki...SCN3717min.JPG

http://starostise.free.fr/overclocki...SCN3724min.JPG

and this

2. ADATA VITESTA EE PC6400 CL4 2GB

M2OAD9G3I4170INE58
ADQVD1A16
10*10.5mm ICs

http://starostise.free.fr/overclocki...SCN3723min.JPG

1. Is not micron ICs but rebadged
2. Is D9 rebadged

so its too differents ICs regadged by adata with the same name. but for D9 sticks have something more written
02-07-2007, 08:59 PM
Roger_D25

From what I've found the CAS5 modules should be Aeneon IC's and the CAS4 modules should be Micron D9GCT (B6-37E), but of course I could be wrong? Both kits look like their running the same exact IC's like you said? Can someone with more knowledge straighten us out on these IC's please? I'm very curious because I'm activly trying to hunt down a kit of Adata modules but the PC2-8000 flavor. In any case thanks for pulling the spreaders off and snapping a couple shots, much apprecaited!

Oh yeah, how are these kits running for you, what speed and what voltage do they like? That might help with identifiying what IC's they are?
02-08-2007, 12:49 AM
Quentin

A-data 2x1Go Pc6400 Extreme Edition
2.4v

http://daftou59.free.fr/Screen/Adata..._585MHz_1M.PNG

Cas 4 @ 2.4v ~500Mhz :slapass:
02-08-2007, 04:20 AM
ghosty1234

test

2x 1024MB Adata Extreme Edition 800+ 4,4,4,12 @2,1-2,2 Volt
M20AD9G31417OINE58
S/N: 701TU (ADQVD1A16)

E6600 L630A767
Abit AW9D-Max (no Mods, all default, MCH@1,95, CPU@1,65)

1. 440 FSb @1:1 @2,45 Volt / after Pi 4M

http://img115.imageshack.us/img115/9...er4mzc5.th.jpg

2. package

http://img182.imageshack.us/img182/7701/ramku6.th.jpg

3. tower

http://img182.imageshack.us/img182/2594/towerad4.th.jpg

4. Everest SPD timings

http://img100.imageshack.us/img100/2605/spdrt7.th.jpg

Conclusion:

This Ram-Chips seems to be very solid. I just tested @1:1. They were even 1M stable @460, 4,4,4,8 @2,65 Volt. Is a good Ram for 975X in order to drive
something between 400-440 "stable".
Maybe they can go higher, but my Abit limits me here till 460!:/ Cause my HZ´s even do the same.

Good solid and cheap! Probably rebadged D9GCT´s.
02-08-2007, 07:07 AM
ghosty1234

Just passed 467 @1:1 with 4,4,4,12
SuperPi 1M with 12.234 sec.

Couldnt save image, lol^^ crashed;)

i´ve to make fsb-mods on my Abit AW9D-Max.
02-08-2007, 09:48 AM
xs64

Quote:

Originally Posted by ghosty1234

Just passed 467 @1:1 with 4,4,4,12
SuperPi 1M with 12.234 sec.

Couldnt save image, lol^^ crashed;)

i´ve to make fsb-mods on my Abit AW9D-Max.

what is vdimm ?
I can run FSB 400 divider 4:5 ==> 500Mhz Mem 5-5-5-15 but can not run 500 1:1 :(
02-08-2007, 09:49 AM
da_h00k

Just for mentioning it's called vdimm voltage (vCore is for the CPU) and 2.65 is REALLY high voltage - hope you didn't used it 24/7 :nono:

And 6400HZ should do more than 450mhz cl4 @ 2.65 btw :fact:
02-08-2007, 09:58 AM
ghosty1234

yeap, i know......
My Board is really strange.....it has a barrier of fsb 460 @1:1. Is well known this Bug.
Untill 440, just tested, i need 2,25 Vdimm.

Now in this pic it has 2,35 Vdimm.
Well,...thats the maximum fsb of this board. Otherwise u have to make mods.

http://img404.imageshack.us/img404/7...annthv8.th.jpg

...
I am 100% sure, they run better on a good 965 Chip Board.
02-22-2007, 06:31 AM
AMD_Deluxe

Hi m8s !

I have got ADATA Vitesta Memory too ..

The serial number is -->

M20AD9G3|4170|NES58
ADQVD1A16

Are this Micron D9 ?
03-25-2007, 03:18 PM
andrey_sebastia

Quote:

Originally Posted by Benny Lodewijk

The chip labeled with ADATA. I'm not sure this is Micron, also the memory don't like voltage > 2.3 volt. I think it's elpida or promos or aeneon

The same thing happening to me
Not good at >2,3 V

I have A-Data Extreme 800+ 2G

On the chips says :
A-Data
AD29608A8A-250G
80702

On the label :
M2OAD9G3|4170INE58
s/n ADQVD1A16

here says
http://www.forumdeluxx.de/forum/show...ge=23&t=267167
"ADQVD1A16 -> umgelabelte Microns"

What are then ?
HELP
03-27-2007, 05:21 AM
zert

Quote:

Originally Posted by andrey_sebastia

On the label :
M2OAD9G3|4170INE58
s/n ADQVD1A16

here says
http://www.forumdeluxx.de/forum/show...ge=23&t=267167
"ADQVD1A16 -> umgelabelte Microns"

What are then ?
HELP

u clearly dont speak german ;)
"umgelabelte Microns" means relabeled Micron Chips so most likely you got D9GCT chips
03-27-2007, 08:48 AM
andrey_sebastia

Quote:

Originally Posted by zert

u clearly dont speak german ;)
"umgelabelte Microns" means relabeled Micron Chips so most likely you got D9GCT chips

But it's stange because it happens exactly like here

Quote:

Originally Posted by Benny Lodewijk

The chip labeled with ADATA. I'm not sure this is Micron, also the memory don't like voltage > 2.3 volt. I think it's elpida or promos or aeneon

"don't like voltage > 2.3 volt"
I've discovered that they work @ 1,90 v (min for DFI 975 x/g ) 844 MHz 4-4-4-8 1T !
I had in the past Team Xtreem w. Micron and I had to change 4 kits because after I used them 844 4-3-3-1 @ 2,45 v they didn't post any more @ 1,90v (reset bios) and I had been refunded
It seems to me that these are 90nm chips (because they work @ low voltages), maybe Promos
Right ? What do you think?
04-02-2007, 12:11 PM
irev210

The images that ghosty posted seem to be Qimonda IC. See how the edges are beveled.

I guess you could call it Aeneon, same thing as Qimonda.

PROMOS always has the triple indents on the bottom.

There are lots of ways to tell what IC is what just by looking at details :)
05-12-2007, 09:33 AM
SharkerSk

http://img443.imageshack.us/img443/4...aserialpq0.jpg
http://img454.imageshack.us/img454/4...0137vn3.th.jpg
:D
It looks like rebadged D9GCT ICs :rolleyes:

http://www.jmax-hardware.com/bdd/BDD_Puces_DDR2.htm
http://ramlist.infinityx.nl/ddr2/

:confused:

I believe .....

My friend has bought these sticks with me and his sticks performs .... around 980 na 4-4-4-10 :D
05-15-2007, 09:25 AM
laragirl83

SharkerSk,
i have absolutely same package:p:
good news is, rebadged D9GCT :fact:
can do 1000MHz CL5-5-5-15 ~ 2.35V:cool:

http://aycu01.webshots.com/image/155...1440012_rs.jpg

on the ram i have OCZ XTC active ram cooler!
05-20-2007, 01:44 AM
SharkerSk

Quote:

Originally Posted by laragirl83

SharkerSk,
i have absolutely same package:p:
good news is, rebadged D9GCT :fact:
can do 1000MHz CL5-5-5-15 ~ 2.35V:cool:

http://aycu01.webshots.com/image/155...1440012_rs.jpg

on the ram i have OCZ XTC active ram cooler!

My one of my memory moduls DIED :wierd: :brick:
I'm sending it on RMA :(
http://www.czechcomputer.cz/product.jsp?artno=43143
:D Superb Price :up:

Hehe Slovak national Topmodel Adriana Sklenarikova-Carembeu like your avatar :up: :smileysex:

http://www.bravoweb.cz/pictures/9917515.jpeg
:bananal:
05-21-2007, 02:58 AM
zert

Quote:

Originally Posted by SharkerSk

........

delete these post please :D

you just couldnt help yourself there could you :D
05-23-2007, 04:09 AM
MrRevhead

Not ADATA, but my PC4300 Micron (OEM) D9GCT's:

CAS 5

Quote:

VDIMM: 2.4v
NB: AUTO
SB: AUTO
ICH: AUTO
vMCH: 1.65

4x512MB modules

5-5-5-15 @ 600mhz (2:3)

http://img339.imageshack.us/img339/3711/600mr2.jpg

CAS 4

Results with the first 2 x 512MB pair:

4-4-4-12 @ 552mhz (2:3)

http://img397.imageshack.us/img397/4...412235vyg6.jpg
05-23-2007, 12:48 PM
zert

impressive result :clap:
05-26-2007, 12:14 PM
chema

so can someone confirm that Adata Vitesta 800 extreme Edition are D9 ICs?
i see that lots of you have D9GCT.
they are at 88 euros here in spain 2x1GB
05-26-2007, 11:57 PM
Neon Biker

Not all of them are D9s, the majority are ProMOS.
05-27-2007, 07:27 AM
SharkerSk

Hi guys.
My stick did 1000 4 4 4 12 :shocked:
With my C2D E6600 @3500~1.42v ~ 500x7 2.4V
I bought it here:
http://www.alfacomp.cz/php/product.p...400820TW000D89
Only for 90 EURO !!!!!

http://img242.imageshack.us/img242/4...1000mhzsm9.jpg
06-10-2007, 08:33 AM
dymONE

4x1GB D9GCT 2.25V

http://dym.haluze.com/Images/Tests/4x1gb_900_4448.jpg
08-11-2007, 04:14 PM
StealthyFish

Hmm.. you guys (and gals? what?) have the same kit as this one? :

http://www.newegg.com/Product/Produc...82E16820211174

(picture is wrong since in the picture, the ram sticks say DDR2 1200. oh how I wish...)

Anyway, I'm going to pair them up with 2 x 1Gb Crucial Tenth Anniversary. The Tenth Anniversary RAM can do

800mhz 3-3-3-8 2.2v,
1066mhz @ 4-4-4-12 2.3v
1100mhz @ 5-5-5-15 2.3v

Can it possibly match this kit or will the kit hold it back greatly?
08-13-2007, 03:55 PM
Timbosan

Quote:

Originally Posted by ghosty1234

This Ram-Chips seems to be very solid. I just tested @1:1. They were even 1M stable @460, 4,4,4,8 @2,65 Volt. Is a good Ram for 975X in order to drive
something between 400-440 "stable".

Good solid and cheap! Probably rebadged D9GCT´s.

&

Quote:

Originally Posted by laragirl83

SharkerSk,
i have absolutely same package:p:
good news is, rebadged D9GCT :fact:
can do 1000MHz CL5-5-5-15 ~ 2.35V:cool:

460 @ 4-4-4-8 at 2.65v & 500 @ 5-5-5-15 2.35v that is terrible lol. No offence.

Quote:

Originally Posted by ghosty1234

Just passed 467 @1:1 with 4,4,4,12
SuperPi 1M with 12.234 sec.

Couldnt save image, lol^^ crashed;)

Crashed during a screeny at 934 MHz 4-4-4-12? I dont get it guys youre posting low speeds, loose timings and high volts, this ram is no good at all :shakes:

Stealthy look at the results! 460 MHz, 4-4-4-12 @ 2.65v lol Do not pair Crucial 10th Anni with this crap lol.
08-13-2007, 06:58 PM
StealthyFish

Quote:

Originally Posted by Timbosan

&

460 @ 4-4-4-8 at 2.65v & 500 @ 5-5-5-15 2.35v that is terrible lol. No offence.

Crashed during a screeny at 934 MHz 4-4-4-12? I dont get it guys youre posting low speeds, loose timings and high volts, this ram is no good at all :shakes:

Stealthy look at the results! 460 MHz, 4-4-4-12 @ 2.65v lol Do not pair Crucial 10th Anni with this crap lol.

lol. I'm just lookin for good deals is all. I got the Crucial second hand for 70 shipped :)
08-13-2007, 07:15 PM
Timbosan

Quote:

Originally Posted by StealthyFish

lol. I'm just lookin for good deals is all. I got the Crucial second hand for 70 shipped :)

i know i wasn't having a go just didn't wanna see ya match great ram with really bad ram. great price on the 10th anni :)
08-13-2007, 10:55 PM
StealthyFish

Quote:

Originally Posted by Timbosan

i know i wasn't having a go just didn't wanna see ya match great ram with really bad ram. great price on the 10th anni :)

yeah, I know. It might just get paired up with one of my tracer kits if I can't find anything priced right :)
08-14-2007, 04:00 PM
Timbosan

From everything i've read, the 10th Anni's, the Tracer's, and the non-tracers seem to be hitting approximately the same mark. The tracer's are a little better with less voltage, and hit a little higher on high voltage. 4-4-4-x at 500 MHz @ 2.1v is around average for those 3 kits. My Corsair 8500's do it too, and will do 600 MHz 5-5-5-18 @ 2.1v. Maybe you can get a good price on them they were cheaper than the Ballistix for me.

All times are GMT -8. The time now is 08:22 AM.

XtremeSystems