Asus P5N-E with GSKILL memory setup insturctions

Printable View

02-02-2007, 04:42 PM
GSKILL TECH

Asus P5N-E with GSKILL memory setup insturctions

Code:

DDR2 1066 / F2-8500 HZ Series FSB SPEED 1066 DDR2 SPEED 1066 VOLTAGE 2.3v TCL 4 TRCD 4 TRP 4 TRAS 5 CMS 1T / 2T 2T TRRD 3 TRC 5 TWR 3 TWTR 6 TREF 4 TRD 3 TRFC 27 ASY LAT 2 DDR2 1000 / F2-8000 ZX Series HZ Series FSB SPEED 1066 1066 DDR2 SPEED 1000 1000 VOLTAGE 2.3v 2.3v TCL 5 4 TRCD 5 4 TRP 5 4 TRAS 15 5 CMS 1T / 2T 2T 2T TRRD 3 3 TRC 5 5 TWR 3 3 TWTR 6 6 TREF 4 4 TRD 3 3 TRFC 27 27 ASY LAT 2 2 DDR2 800 / F2-6400 PQ Series MQ Series NQ Series PK Series HK Series HZ Series NR Series FSB SPEED 1066 not compatible 1066 1066 1066 1066 1066 DDR2 SPEED 800 800 800 800 800 800 VOLTAGE 1.92v 1.92v 1.92v 2.013v 2.013v 1.92v TCL 5 5 4 4 4 5 TRCD 5 5 4 4 4 5 TRP 5 5 4 3 4 5 TRAS 15 15 12 5 12 15 CMS 1T / 2T 2T 2T 2T 2T 2T 2T TRRD 3 3 2 2 1 3 TRC 15 20 3 3 2 20 TWR 6 6 5 5 2 5 TWTR 9 9 7 6 6 9 TREF 1 1 1 1 1 1 TRD 6 6 5 4 2 5 TRFC 51 42 42 30 27 42 ASY LAT 2 2 2 2 2 2 DDR2 667 / F2-5400 / F2-5300 NT Series LA Series ZX Series FSB SPEED 1066 1066 1066 DDR2 SPEED 800 800 800 VOLTAGE 1.92v 1.92v 2.013v TCL 5 4 4 TRCD 5 4 4 TRP 5 4 4 TRAS 15 12 12 CMS 1T / 2T 2T 1T 1T TRRD 3 3 3 TRC 20 20 15 TWR 5 5 5 TWTR 9 9 7 TREF 1 1 1 TRD 6 6 6 TRFC 35 35 27 ASY LAT 2 2 2 *IF THE OPTION IS NOT LISTED, PLEASE SELECT AUTO *FOR PRODUCT REQUIRES OVERCLOCKING FSB, PLEASE MAKE SURE CPU SPEED AND HTT RATIO AT THE CORRECT SPEED
02-14-2007, 12:36 PM
PanteraGSTK

You don't miss a beat do you? I diddn't even expect to find this in this section. Awsome.
02-14-2007, 04:35 PM
GSKILL TECH

let me know if it is not working. i test it one by one, but i do copy it wrong something... typo you know :)
03-04-2007, 02:07 AM
safan80

Do these settings work on the P5N-E SLI PLUS? or do I use the settings from the Asus P5N32-E & Striker Extreme with GSKILL memory setup insturctions thread?
03-04-2007, 03:45 PM
Super strokey

I just ordered some of NQ ram, ill try these setting for sure. Also how much of a difference does 2T and 1T make on DDr2?
03-05-2007, 11:18 AM
GSKILL TECH

Quote:

Originally Posted by safan80

Do these settings work on the P5N-E SLI PLUS? or do I use the settings from the Asus P5N32-E & Striker Extreme with GSKILL memory setup insturctions thread?

for those 3 mobos setup is about the same.
the only difference is voltage. use either one should be ok
03-05-2007, 11:19 AM
GSKILL TECH

Quote:

Originally Posted by Super strokey

I just ordered some of NQ ram, ill try these setting for sure. Also how much of a difference does 2T and 1T make on DDr2?

1T is better than 2T but require more voltage tho
05-07-2007, 08:01 AM
zaina

Hello GS, thank you very much for this very informative info in this thread.

I've been running HZ stable at 800Mhz with your info above (2.08V 4-4-4-12-2T-1-2-2-6-1-27-2) and now I wanted to OC my E6400 system to 450x8. With Linked, the RAM will be 900Mhz --please let me know what would be the best memory settings for 900Mhz.

Quote:

1T is better than 2T but require more voltage tho

Other than upping the voltage, do we need to change the other settings as well?

Also, is there any difference between the green and black PCB? I got 2x1GB green and another set with black pcb.
05-07-2007, 08:05 AM
GSKILL TECH

Quote:

Originally Posted by zaina

Hello GS, thank you very much for this very informative info in this thread.

I've been running HZ stable at 800Mhz with your info above (2.08V 4-4-4-12-2T-1-2-2-6-1-27-2) and now I wanted to OC my E6400 system to 450x8. With Linked, the RAM will be 900Mhz --please let me know what would be the best memory settings for 900Mhz.

Other than upping the voltage, do we need to change the other settings as well?

Also, is there any difference between the green and black PCB? I got 2x1GB green and another set with black pcb.

green / black are the same
overclock to 900 you can use the timing i suggest.

thank you
05-08-2007, 03:48 PM
JPMATRIX

HI all

G.S Technician I have the NQ Series, and I tried the values you posted but still the system isn't stable, it only takes a few seconds for the system to halt when loading windows.
Those timings helped (before I couldn't even go to the bios) but they still don't work.

I think the problem might be in the northbridge voltage so witch voltage did you use?

I think the problem might be in there but I honestly don't know :(

please help

I am going crazy with this :stick:
05-09-2007, 10:16 AM
GSKILL TECH

Quote:

Originally Posted by JPMATRIX

HI all

G.S Technician I have the NQ Series, and I tried the values you posted but still the system isn't stable, it only takes a few seconds for the system to halt when loading windows.
Those timings helped (before I couldn't even go to the bios) but they still don't work.

I think the problem might be in the northbridge voltage so witch voltage did you use?

I think the problem might be in there but I honestly don't know :(

please help

I am going crazy with this :stick:

try to use 1.534v on NB. it might help
05-09-2007, 11:30 AM
JPMATRIX

Just tried that, system rebooted doing vista memory test. :(
05-13-2007, 12:41 PM
JPMATRIX

So any more ideas? I still cant get DDR 800 speed, I am forced to run the memories at 667 :(
06-01-2007, 08:25 AM
jinsean

Hi,

I'm planning to buy the p5n-E with some g.skill ddr2 800 memory (4x1gb), but am having trouble deciding which model. I'm not a fan of OC'ing the memory. So I'll leave it at DDR2 800 speed, but I will be OC'ing my core 2 duo e6420 to 3.5ghz+ with water cooling.

Would it be ok to use some of the cheaper models (e.g. PQ, NQ, PK)? Or will the cheaper models hinder/restrict the amount of OC i can get from my CPU?

How much more should I increase the memory voltage to get 1T timings on the PK model? 2.3v?

I know there's no such thing as really "safe" when it comes to increasing voltage on a memory, but what's the "safest" amount I can push the voltage on memory that you would recommend?

Thanks in advance.
06-01-2007, 09:25 AM
GSKILL TECH

Quote:

Originally Posted by JPMATRIX

So any more ideas? I still cant get DDR 800 speed, I am forced to run the memories at 667 :(

increase the voltage, change to other slot, increase the voltage of NB, better cooling for NB
those are my suggestion
06-01-2007, 09:26 AM
GSKILL TECH

Quote:

Originally Posted by jinsean

Hi,

I'm planning to buy the p5n-E with some g.skill ddr2 800 memory (4x1gb), but am having trouble deciding which model. I'm not a fan of OC'ing the memory. So I'll leave it at DDR2 800 speed, but I will be OC'ing my core 2 duo e6420 to 3.5ghz+ with water cooling.

Would it be ok to use some of the cheaper models (e.g. PQ, NQ, PK)? Or will the cheaper models hinder/restrict the amount of OC i can get from my CPU?

How much more should I increase the memory voltage to get 1T timings on the PK model? 2.3v?

I know there's no such thing as really "safe" when it comes to increasing voltage on a memory, but what's the "safest" amount I can push the voltage on memory that you would recommend?

Thanks in advance.

please don't use 4 dimm on 680/650i, many problems appear. it is about 50/50 chance to make it works 4 dimm
06-01-2007, 08:02 PM
jinsean

How would you suggest I get 4 gigs of ram set up with the p5n-e? Which memory modules?
06-03-2007, 03:40 PM
jinsean

would the NQ series (2x1gb) be fine when I'm trying to overclock only my CPU (no ram OC, just going to keep it at ddr2 800)? I'll be pushing the FSB to about 450 or higher if possible.

I'm going to be watercooling everything. North bridge, south bridge, cpu. So I want to push the board to its limits, but I don't want the memory to be holding me back.
06-04-2007, 07:54 AM
GSKILL TECH

Quote:

Originally Posted by jinsean

would the NQ series (2x1gb) be fine when I'm trying to overclock only my CPU (no ram OC, just going to keep it at ddr2 800)? I'll be pushing the FSB to about 450 or higher if possible.

I'm going to be watercooling everything. North bridge, south bridge, cpu. So I want to push the board to its limits, but I don't want the memory to be holding me back.

i am not sure what you mean
using 4 sticks NQ on P5N-E and overclock?
or
2 sticks NQ on P5N-E overclock?

watercooling on NB that is really idea

NQ might do ~900, 950 on P5N-E but YMMV
06-05-2007, 11:51 AM
JPMATRIX

Quote:

Originally Posted by G.S Technician

increase the voltage, change to other slot, increase the voltage of NB, better cooling for NB
those are my suggestion

I have done all that, even replaced the northbridg chipset with a Noctua NC-U6

tried the latest BIOS 0604 nothing solved.

can you at lest tell me which are the best timings for this memories in 667 mode?

currently using this ones:

http://img111.imageshack.us/img111/9...rtosvt3.th.jpg

and by the way which program do you recommend to test the memories? I dont like memtest and I think orthos or prime are ineffective sinse I can run a test for over 10 hours and still get random BSOD :(
07-15-2007, 04:09 PM
brunormt

Gs that timings are great.
I have a P5N-e sli, with some gskill hk, and they wok just fine.
Although i tried to push them above the 800mhz, increasing the voltage, but it doesn´t go. My processor is a 805 at 3,5ghz, and i think it is something about the fsb:dram. not it is 7:16.
The max that i can do is a miserable 840mhz:(
What do you think?

Thank you for post that timings.
07-15-2007, 04:10 PM
brunormt

*now it is 7:16
07-17-2007, 12:43 PM
GSKILL TECH

Quote:

Originally Posted by brunormt

Gs that timings are great.
I have a P5N-e sli, with some gskill hk, and they wok just fine.
Although i tried to push them above the 800mhz, increasing the voltage, but it doesn´t go. My processor is a 805 at 3,5ghz, and i think it is something about the fsb:dram. not it is 7:16.
The max that i can do is a miserable 840mhz:(
What do you think?

Thank you for post that timings.

lower to CAS 5 for overclock; i think that would help
07-18-2007, 01:53 PM
brunormt

Thank you gs w´ll try.
09-16-2007, 01:08 PM
grimpy

G.S. Tech,

what overclocks can i expect from 2Gb G.Skill DDR2 PC2-6400 PK Series 4-4-4-12?

could 450 be hit with a voltage increase whilst at 4-4-4-12 or would i need to slacken the timings?
12-12-2007, 05:59 PM
WeldZilla

Here are 2 different ways I run my G.Skill on my P5N-E Board

This is G>Skill 6400 HZ.......

You ready to be rocked??????

First low bus and tight timings. I mean tight!!!!!
http://img.photobucket.com/albums/v2...la/tighter.jpg

Now at high fsb still one 1:1 and still tight!! just not as....

http://img.photobucket.com/albums/v2...Zilla/yups.jpg

The P5N-E and the HZ are just a perfect match!!

WZ
03-31-2008, 05:52 PM
Codeman05

What timings would you suggest for the: F2-8500CL5D-4GBPK (2x2GB) on the P5n-32e? Would it be the same as the HZ DDR2 1066 / F2-8500 in the initial post?