32M SPi on "F" E6600

Here is CPU shot of "F" E6600 that is relatively rare.

http://kr.img.blog.yahoo.com/ybi/1/0...1169636654.jpg

And I run 32M pi with winter-advantaged air-cooling.

http://kr.img.blog.yahoo.com/ybi/1/0...1169637699.jpg

The photo of setting is here.

http://kr.img.blog.yahoo.com/ybi/1/0...1168244306.jpg

To my impression, "F" E6600 might be much low temp in action than "B" E6600. But, this is just a random sample. Don't be conclusive. I didn't modded Vcore, but more voltage seems to be set. I'm waiting for DFI 965X board for more perfomance on this CPU. :toast:

nice "F" :D

Very nice cpu indeed!

it's retail box ?? Temp cpu ?? Please

Very nice oc !!!!

Yes, it's plain retail box. Check Coretemp shot. Asus probe II indicated cpu temp around 18C on idle, 33C on full-load.

Ohhh, it's very great OC. I will try to get a F step :D

Almost 4.2Ghz on "air" and 32M stable, that's looking good!! Will wait for some more results with "F" revisions out there.

Nice clocks with cold air, not many 'F's have shown up, but yours is an interesting sample, temp-wise.

Your ram obviously benefit from the ambient temp as well, what vdimm for 465 3-3-3-4 ?

Actually, vdimm has been modded, and it was on the screenshot, 2.75v. Memory used was A-DATA 6400 Extreme Edition 512M X 2.

Impressive results! :toast:

What were the ambient temps?

Looks very promising thanks for sharing

I love your case :D

Have cpu-z processor screenshot, or validation link?

CPU-Z shot is on the screen. Usually I'm not make validation, but I'll do next time. Weather forecast said that it would be very cold this weekends. I'm waiting now. :)

Quote:

---

Originally Posted by anarinsk

CPU-Z shot is on the screen. Usually I'm not make validation, but I'll do next time. Weather forecast said that it will be very cold this weekends. :)

---

LOL we all know what that means :D

how does it perform on normal room temp ~20C

do you have the ability to pick steppings or you just got lucky and received an odd one

Quote:

---

LOL we all know what that means

how does it perform on normal room temp ~20C

do you have the ability to pick steppings or you just got lucky and received an odd one

---

At now, I set 3.3g with 1.30v. CPU temp is around 32-35C with 20-22C ambient. I tested 3.6g with 1.37-8v, but 3.3g is pretty much satisfactory for me. OC is just a hobby to me. :toast:

Generally, in Korea, retailers do not accept any request about CPU stepping from customers. They hate such a demand extremely. No connection, no handpicking. I'm disconnected. :) This is just a chance. I was also surprised when I received the chip. What the F... ?!? :slobber:

Need to use coretemp or TAT to show CPU temps.

I have E6600 L630F020 retail box, can run 4ghz vcore 1.525 on bios stable spi 32M with around 38 - 45C with core temp. cooling Syhte infinity.

Quote:

---

Originally Posted by Hazzan

I have E6600 L630F020 retail box, can run 4ghz vcore 1.525 on bios stable spi 32M with around 38 - 45C with core temp. cooling Syhte infinity.

---

ambient temp?


damn man you keep getting nice CPUs

dinos22 : ambient 21 - 22 C maybe later I post picture and screenshot.

What the F?

That's one damn fine CPU!! :toast:

Simply insane - wish I had one. Didn't know you could do sub-ambient temps with aircooling :o

Any dual orthos stability tests on this F chip yet?

is this a new batch? i never heard abt "f"...how does it go with normal air cooling?

Marco

Quote:

---

Originally Posted by dinos22

ambient temp?


damn man you keep getting nice CPUs

---

I juz found 1pc @ one of my fren's shop...
Its a L629F050...
I try it out tonite n see how "good" is it...
keke... hope its as good as the threadstarter's..
:)

Super results :toast: are these F's also made in malay? How is the IHS quality any improvement?

hey guys me and clon22 just got them today from the same place.. i'm running orthos now.. keep getting bsod with 1.38V small fft 8k. that happens like at the end of the second round. so now upped vcore a little. and trying again. ihs quality seems like the same as my l631b. i'll be going upwards in speed so 4ghz run will be last. its exam period gotta slow down ;) oh yea F are Malaysia~ and i forgot to say... this chip is HOT! inline with B's

nice chip there.
32m >4.1 gig on air is really nice output :toast:

I did a quick run on my 629F...
Not veri good thou...
Not stable...


http://i76.photobucket.com/albums/j3...9_4434_22v.jpg

A little bit more. I think more vcore could give another boost.

Usually, I'm not interested in doing Prime. :D It's too much exhausting. My 24/7 setting with this CPU is 3.3g/Vcore 1.28. I've not a single trouble in any kind of tasks yet. Also, I tested dual 32M SPi under 3.6g/Vcore 1.36.

http://kr.img.blog.yahoo.com/ybi/1/0...1170318624.jpg

Holy!.....
Wow man...
thats some cool chip u have there..

466 3-3-3 ain't too shabby either. :slobber:

wow
your "F"Code is Very Good
this test in A-DATA 6400 Extreme Edition 512M*2 ?

Quote:

---

wow
your "F"Code is Very Good
this test in A-DATA 6400 Extreme Edition 512M*2 ?

---

Yep. A-DATA Viesta Extreme Edition 512M X 2. Its part is known as D9GCT IC. :)

Quote:

---

Originally Posted by Zeus

466 3-3-3 ain't too shabby either. :slobber:

---

Thats the most imperssive to me :)

How much vdimm for 466 3-3-3?

wow u guys sure got LOW temps! haha well mine's same as clon22. i'm not at home now so i dun have pictures to share. maybe later today. haha anyway i'm not so hardcore as u guys but here's my link. hope it helps. please do feedback okay~

it sure needs lots of volts. and its sure a hottie.

http://forums.vr-zone.com/showthread...02#post3210702

Quote:

---

Thats the most imperssive to me

How much vdimm for 466 3-3-3?

---

Vdimm was 2.75v. No mod on Vmch. At now, I'm going to mod Vcore for more deep(?) investigation :banana:

Quote:

---

Originally Posted by anarinsk

Vdimm was 2.75v. No mod on Vmch. At now, I'm going to mod Vcore for more deep(?) investigation :banana:

---

Your ari cooling ststem is very good set ~! & Monster CPU :eek:

I have an E6600 "F" ES B0 4

what about it ?

I can do 4.5 unser ss...

I want mine to go that high. Then again, I don't have winter air blasting my computer.

I find a F step; test tomorrow :D

http://sugeknight.info/PC/Processeur...00L639F032.jpg

I have an F as well. Ambient temp 21 C. Running in my Antec nine hundred with a Tuniq Tower 120 cooler my machine idles at 19-20 C, and the highest I've seen after gaming is 37C.

i got a L633F012 but it could not prime blend stable at 3.6 for more than 6hrs at 1.6v even i can bench at 1.4v....got another L632F045 and test if this week32 is performing as good as urs :)

Finally, my 6600 is not brilliant :(

Max spi 1M 1.7V / P5B / water:
http://sugeknight.info/PC/Processeur...32/spi3984.png

Max screen:
http://sugeknight.info/PC/Processeur...screen4044.png

Max fsb: 470 Mhz :confused:

my 2nd F is still abt the same as my first or only slightly better..

B stepping is still the king here :D

Yes. In the case of Intel, Batch/Code seems to be not so relevant as AMD. F code of my friend was not so promising as mine :)

i guy,i want report my experience with "F" Conroe :)

The CPU
The Chipset
The Mainboard

Some result can you see on my sign :)

Very interesting the temp and the high scalability, with +.25v i've stable @ 375*9=3375 37° idle/53° full load, with 1.45v i bench for 5h @ 400*9=3600 ,max temp 68° STOCK COOL!

Now my shop got few units of E6600 629F and one last unit 631B,
which one should i go for ?
the B version ?

i just baught a L629F cpu
520 max fsb under tuniq tower 120 (ds4 limit)
i can get it prime stable few minutes at 3900mhz for 1.53v real vcore, 75°C load temp with TAT

It's really good clock. ;)

got my 3rd F cpu to try L630F..i managed to get 1.47 prime stable for 14hrs on small FTT @3600mhz using 1.47 actual volt.

now Im itching to play with my 3060 l631f I got yesterday. maybe I can talk a friend into bringing another motherboard over to throw it in until monday :shrug:

L629F204 1.62v 22°C ambiant temp under tuniq tower

max screen

http://valid.x86-secret.com/show_oc?id=179984

http://valid.x86-secret.com/cache/179984.png

F are very nice :)

L629F210
3.8 1.5V stable on air
4ghz 32M and 3d stable 1.65V
4175 max 1M at 1.65V on a modded p5b dlx

http://xs413.xs.to/xs413/07123/3800_occt.jpg

anyone heard of a L639F030?
some dude is selling one . and im seeing so many mixed numbers.

Quote:

---

Originally Posted by ooeric

anyone heard of a L639F030?
some dude is selling one . and im seeing so many mixed numbers.

---

I've tested 4 of them in a while, but none of them was stable @3600 under 1.5-1.55v .So nothing special, cos mine B chip makes 4gh with such a voltage:cool:

tested one of these "F" chips last night on intel stock cooler


CPU: E6600 (batch# L629F122)
Mobo: Asus P5B Deluxe WIFI 1004 bios
Cooler: Stock Intel air cooler :)
Ambient temps: 20C

http://img253.imageshack.us/img253/8...teppinglo4.png

3.5GHz 1.45v Load Orthos Stable 1 Hour
http://img261.imageshack.us/img261/4...lendloanl7.png




not as nice as your CPUs guys....but i'll see how much difference water makes anyways heh

I just looked at mine and I guess its an "F"

ITs umm...


L639F030

Is that any good ?

here you guys go if you want a 29F, they cost a little more but you know what your getting, if your in the US

http://http://www.tankguys.biz/produ...oducts_id=1671

nice "F".... that is an insanely huge cooler!:eek:

did some more tests but this time with Corsair Nautilus 500 watercooling kit :)

http://img245.imageshack.us/img245/4...oaded1hoi1.png

http://img180.imageshack.us/img180/8...m13890slw5.png

http://img503.imageshack.us/img503/5...33mhz34nh6.png

http://img247.imageshack.us/img247/3...superpice4.png

4GHz :eek: :D

http://img516.imageshack.us/img516/4...pi12578yp7.png

http://img508.imageshack.us/img508/4...superpiyv7.png

http://img183.imageshack.us/img183/2...66strapra1.png

awesome cpu dino22,
is this L629FXXX
what voltage on 4Ghz"

1.64v :)

I just Yanked an L29F E6600 out of an HP Boxed system. 3.8 1.46v Orthos Stable. Boots into windows fast @4050 but only about 2 min stable small fft with 1.65. 1.62 after droop. I'm happy with 3.8 1900*8 on 680i has always been a sweet spot for me. My strive for 4.0 continues......

Quote:

---

Originally Posted by nugzo

I just Yanked an L29F E6600 out of an HP Boxed system. 3.8 1.46v Orthos Stable. Boots into windows fast @4050 but only about 2 min stable small fft with 1.65. 1.62 after droop. I'm happy with 3.8 1900*8 on 680i has always been a sweet spot for me. My strive for 4.0 continues......

---

any idea the complete fpo/batch for your L629FXXX?

Quote:

---

Originally Posted by nugzo

I just Yanked an L29F E6600 out of an HP Boxed system. 3.8 1.46v Orthos Stable. Boots into windows fast @4050 but only about 2 min stable small fft with 1.65. 1.62 after droop. I'm happy with 3.8 1900*8 on 680i has always been a sweet spot for me. My strive for 4.0 continues......

---

wow that's a really nice one