Printable View
It is a pre-production model, within the next few days I shall lead full test and I shall tell about results :rolleyes:
http://images.people.overclockers.ru/108309.jpg
http://images.people.overclockers.ru/108312.jpg
http://images.people.overclockers.ru/108615.jpg
"SLI" water cooling for test's :toast:
http://images.people.overclockers.ru/108614.jpg
+
http://www.topmods.net/misc/water/quadwater.jpg
Interesting sample, I look forward to the results!
I think that the shape of the hold down makes it look like it should be in an alien movie :D
Looking for forward to this review
Interesting, i'll be looking forward to seeing how it performs. I assume thats two intakes / two outlets? Which is which? Like are they perpendicular, diagonal, etc...
Nordling Hi, why TiN dont do that? Will you test on the quard-core cpu?
PS: poglad` prostun` :) ROLF
Lurid They areQuote:
diagonal
Can't see the complete baseplate, but it looks like the center will receive the least flow when all 4 inlet/outlets are connected. Might work well on a dual die CPU though.
I guess we'll have to wait and see!Quote:
Originally Posted by Fairydust
If the flow is crossed, would it not interfere? :confused:
It depends on how the internals are, I would think.
Bravo. I see two independent pumps and two radiators already lol :) Double up on everything :)
I think the block would perform better if there were an inlet in the center, and all four of those barbs were outlets. A tubing mess for sure, but I'd like to see how a block like that could perform.
If there are two inlets and two outlets, how do you ensure there is good flow through the center of the block? It doesn't really matter how you configure the inlets and outlets... there is always an outlet adjacent to an inlet! :confused:
Looking at the copper block pattern, it looks like old-school Apogee except square posts instead of diamond.
I bet that this flows well but is not as effective at cooling. :2cents:
At any rate, I'm interested in seeing the results.
For comparative purposes, it'd be best if we could secure one of these, or if the reviewer could get a couple of other well known blocks, and compare it vs them, no?
Looks neat, but needlessly complicated...
Ply
*shakes head in dismay*
what happened to all the good russian engineers?
Wow! http://xs211.xs.to/xs211/07041/sbEtonne4.png Looks like a complicated block!
Interesting design. I'd like to know what the advantages are of having two intake/outtake.
Considering how hot current gen quad cores get, you could...erm...run two loops that feed into here? (joking)
All works here:
http://images.people.overclockers.ru/108781.gif
so It only one of modes of work of system
That's interesting. Will there also be a shared reservoir somewhere in the loop?
Certainly, I to draw there was no it simply
http://www.topmods.net/misc/reserv/reserv.jpg
http://www.topmods.net/misc/reserv/reserv3.jpg
http://www.topmods.net/misc/reserv/reserv2.jpg
http://www.topmods.net/misc/reserv/reserv5.jpg
http://www.topmods.net/misc/reserv/reserv6.jpg
http://www.topmods.net/misc/reserv/reserv7.jpg
This waterblock from Ukraine`s engineers :)Quote:
Originally Posted by MaxxxRacer
Drager2
You are not right, the developer of the given water-block lives in Nizhni Novgorod, as a whole it draws drawings and makes to them our amendments
Nordling Omg, very sorry - I thought it was TiN...
Drager2 - lol :)
Да у тина его ЭГО не даст сделать даже что-то подобное, пусть и на чертежах :)
Im really looking forward for the results!
Workmanship and all looks the goods look forward to the test results, as some others have eluded to though regarding the flow of water, I see the centre missing the flowing "goodness"
http://www.myfoto.com.au/Photo/snapp...iew/108781.gif
That said I think it will go reasonable well but nothing to write home about... time will tell :-)
The first tests I shall lead on the processor - AMD 3200+@2700MHz 1,6\1,7\1,8V - without the thermal allocator. I shall lead the test on 6600 little bit later
AussieJester You are right, I almost with all agree
The basic author of the water-block has advised to use it in such a mode:
http://images.people.overclockers.ru/109090.gif
How you think it will not be worse than a parallel stream of water?
Would this create some kind of turbulance in the centre of the block as both streams are moving in opposite directions? I don't know if this is a good or bad thing! :rolleyes:
Probably it is necessary to look results of tests of both ways :(
Has made one of these days SLI - system of water cooling, and it was ran under tests:
http://images.people.overclockers.ru/109719.jpg
http://images.people.overclockers.ru/109713.jpg
http://images.people.overclockers.ru/109720.jpg
http://images.people.overclockers.ru/109718.jpg
http://images.people.overclockers.ru/109717.jpg
http://images.people.overclockers.ru/109716.jpg
http://images.people.overclockers.ru/109715.jpg
http://images.people.overclockers.ru/109714.jpg
Delta T (CPU\Woter) = 12C - S&M 15min Test's
Lol, it's a tubing rainbow :D Can't be good that that one tube it twisted and bent @ one barb on the gpu block. I'm 100% sure your aware of that. Also missing clamps @ gpu and cpu block AFAIK. Anyways I look forward to seeing some controlled results with this block.
You gotta love the big glass pickle jar for a Res.. You could get one for free at Costco, just need to eat about 200 pickles. Somebody should put that one up the next time somebody asks what the best reservoir is.
Here photos of the engineering sample of the water-block on a videocard, it is the test version, therefore such "terrible"
http://images.people.overclockers.ru/110834.jpg
http://images.people.overclockers.ru/110835.jpg
http://images.people.overclockers.ru/110836.gif
I like that .gif animation there
Pete
It will be fast the full test and huge video the report on work...
Those looks like really huge barbs. At least from the pic. :rolleyes:Quote:
Originally Posted by Nordling
Amazing Nordling, im in awe.
malccy lol
Very good looking designs. Not sure on how well they will work but the certainly look the part:slobber:
How do you plan on cooling the memory of the G80, looks like the block will 'block' at least two chips.
The given water-block only one of several types, tests on 8800 will be soon, wait... There Will be water-blocks parts covering all 8800... THK
http://images.people.overclockers.ru/111369.jpg
Hi, where can i get this CPU Cooler?
cpu block looks beastly... wonder how it performs..on a quad
i like the look of that gpu block though..
Also wondering about CPU cooling. The only other similar (production) block that comes to mind is the Arctic Web block, but that's designed for cooling a tec, with a more spread-out heat load. And even then, the pin matrix is diagonal, which would help spread the flow out.