Printable View
Here's some firsts results with the commando, first impression : good board, really near from p5b-dlx with a great vddr potential, FSB seems good too.
Some aircooled screenshots :
http://www.overclocking-masters.com/...creens/570.JPG
http://www.overclocking-masters.com/...ens/Bestpi.JPG
http://www.overclocking-masters.com/...ommandoram.JPG
So your board can do 570FSB? How stable is it? What VMCH?
Also your ram, what sticks and what vdimm ? :D
Gratz on results.
yes 570 is a piece of cake, ram sticks are Supertalent T800uxgc4 with 3Vddr :)
wow nice clocks on air cooling...
did you change the NB thermal paste is it stable???
No, all is stock, passive nb and all ...
geez nice clock...
my P5b needed the thermal paste/gunk/pad lol removed and replaced with
artic5 to get past 430fsb...
must have been a bad connect or somthing...
what VMCH???
Stock settings, just vcore and vddr settled :)
OMFG....that is impressive...at stock
Looks like this a very nice board except for reported vdroop
NB, SB etc [Auto] in Bios?Quote:
Originally Posted by misteroadster
if yes, the board set automatically higher voltages :) (look @ pcprobe 2)
how bad is the Vdroop on it??? It dosent seem to be affecting the clocks
at all lol...
thats a heck of a chip ya got there as well... wish mine would doo that...
though while lapping mine I belive its called a SMD on the bottom of the chip
mm well it fell off lol... the damb thing still runs though...
Strange really I've lapped prolly 100 chips by now and never had that happen...
So you gonna keep in on air or going to water or phaze???
This chip is really good for FSB on air, but not so good with more cooling, it's a good mobo tester :D
What about vdrops? :D
Did you use Clockgen to stay on 1066 strap?
Nice results so far roadster! Can you please play with strap changes if you have a chance and see if its the same as the other boards?
:toast:
Wow, might want to keep a fire extinguisher handy!Quote:
Originally Posted by misteroadster
As you can see on my screenshot , vdrop is about 0.02v.Quote:
Originally Posted by M3kk
http://www.pt1t.net/Commando/commando_vdrop.PNG
What voltage did you set in BIOS? And how much voltage is it measured with a DMM??Quote:
Originally Posted by Pt1t
1.55v in bios , and it s real vcore.Quote:
Originally Posted by GrossmeisterB
misteroadster
Have the board here too but can't get the fsb over 553 at multi 9,
Multi 8x is 560
multi 6 is 576 no problem, its not cpu becouse it did 572x9 already on the p5b.
did you try at higher multi?
edit:
vcore above 1.80v results in lowering the vcore
example:
1.80 @bios = 1.77
1.85 @bios = 1.70
so max to get unmodded is 1.77 real vcore.
What do you mean it's "real" Vcore? Measured with a DMM or not?Quote:
Originally Posted by Pt1t
I mean, you can't say "that sensor measures right", without having it checked with a DMM...
I'm about to buy that board as well, but I want to make sure there's not that huge drop of voltage under load like on t he p5b dlx for example...
thanks for your info!
on a side note, does anyone know if this board supports dolby digital, all its says on the asus site is supreme fx and dts....thx
real is real :banana: , yep mesured by DMMQuote:
Originally Posted by GrossmeisterB
wow.
Sounds good! Thanks for that info!!Quote:
Originally Posted by Pt1t
Salut Misterroadster :)
I'm just jealous. I can't even get to 500 FSB with mine, could you please give me your BIOS setup? I removed the stock heatsink, it was only 30% in contact. So I installed Artic Silver instead of the stock tape but it's not enought...
See you,
Thomas
I dont see max FSB for Q6600. Can you test litre more Q6600, and shere Max FSB with as.Thanks:)Quote:
Originally Posted by misteroadster
Yes, because I maxed out at around 460 FSB... with the Q6600 :p (hope my pb comes from the CPU)
I stuck at 455Mhz with the QX6700. Seems to be the typicall FSB Wall in this Mobo with QuadCores.
wQuote:
Originally Posted by krampak
What MB?
Quote:
Originally Posted by krampak
can you share settings
vcore
vdim
multy
ext
thanks baz
With what MB?Quote:
Originally Posted by Thomas Olivaux
The Commando of course :)
I tried with the lower multi (x6) and with voltage increase for FSB Term, NB and SB.
I dont have eny more P5B DLX after I do 470FSB , bun no screnshot. My mb is must go to my friend and this is max at box and multi 8, vcore 1.52V. Full load 92-93C deam it is hot.Quote:
Originally Posted by Thomas Olivaux
http://www.fotorola.com/uploads/2731f70d47.jpg
and today I see that Supertim0r can do 470 MHz with P5B DLX same as I, and when he get commando max what is he do is 400 MHz, I order commando and this is frickig me out
http://www.xtremesystems.org/forums/...125865&page=16
God damn it, i've had mine a week and i'm still waiting to get it up and running. I need a new CPU which i'm purchasing on tuesday next week.
Hopefully i'll get a good OC with an E6300.
finally someone actually posted some real results from the board...
getting damn tired of these "reviews" that have have no results and 200 pictures of the board...
Good stuff!
impossible to run over 395fsb :(
I have some numbers if you want.... :) DFI RD600, Asus Commando and Intel XBX2KR:Quote:
getting damn tired of these "reviews" that have have no results and 200 pictures of the board...
http://img225.imageshack.us/img225/6816/final2so9.png
I don't really know why are Spi numbers better on the Asus Commando than on the Intel badaxe2, i've used exactly the same configuration in all boards, except the 1T CPC on the DFI which couldn't be configured on the Asus and the Intel boards. Also the low result in 3dmark 2001 on the Intel board isn't normal, it should be the highest.
What is impossible to run at 395fsb?Quote:
Originally Posted by Supertim0r
I found the same when comparing the Commando to my P5WDG2 WS Pro at identical settings. :stick:Quote:
Originally Posted by krampak
Maybe this Commando has some "tweaked" P965 ? :D Better superpi and 3dmark 2001 results than a 975X ? that's not usuall for sure.
ok, found the problem...max fsb in a few mins
Do share! :toast:Quote:
Originally Posted by Supertim0r
guys, does the commando swtich the strap at also 401mhz like the p5bdlx or at some higher speed
yup 401
vfsb 1.5v
nb volt 1.7
posted already results overhere kunaak
http://www.xtremesystems.org/forums/...1&postcount=19
same fsb @ watercooling , don't think its better then p5b dlx except memory speed and voltage's
Notice: Only DDR2-800 memory supporting JEDEC approved 1.8V operation with timings of 5-5-5 or 6-6-6 is supported on Intel Desktop Boards based on Intel 965 Express Chipsets.
So Cellshock PC 8000 1000MHz 4-4-4-12 will not work on 965 boards:confused:
nice start misteroadster
congrats
That is still not 470 MHz, try more setings or I will kill myself because I sell my DLX mb.:brick:Quote:
Originally Posted by Supertim0r
Quote:
Originally Posted by palese
Yes and no, you'll need to boot with a stick of el cheapo ram and then change volts to get it working.
Anyone know my I can't do 433FSB x 9 with my E6600? I increased vcore to 1.5725, NB to 1.6 and FSB termination to 1.45 and its still not stable. I can boot into windows but orthos failed and restarted in 1 sec
i had this kit on my commando and it work without problems, i dont need a other stickQuote:
Originally Posted by palese
to change the vdimm.
do you have the newer SPD chri$ch? the one with EPP tooQuote:
Originally Posted by Chri$ch
Deam that is 3.9GHz you must have to expensive cooling and to much good CPU, and litle more to increase voltage.Quote:
Originally Posted by DarkSephiroth
no, my kit was without EPPQuote:
Originally Posted by HermS
edit: SPD was 500Mhz 4-4-4-x
Where did you get ahold of the 0702 bios? I thought there wasn't one released yet..Quote:
Originally Posted by Supertim0r
Hmmm thats curious, sounds the same as mine (week 42's) I also find that if I have a failed overclock the commando just will not recover while the Cellshocks are in. Doesn't happen with my HZ's or at least less so. I wonder what I'm doing differently.Quote:
Originally Posted by Chri$ch
is def. voltage to low on your commando? or your cellshocks need 2v or higher to
boot.
ps: my kit was week 41 and i dont had any problems on Commando and P5B Deluxe
Quote:
Originally Posted by Chri$ch
Shows as 1.84v at bios defaults, thing is I had the same problem with my P5WDG2 WS Pro. The sticks clock great (467MHz 3-3-3 @ 2.45v) but just struggle at low volts, very odd behaviour. I think it's better that I take the issue up with MSC and see if they know anything about this or have any ideas. :)
Sorry i've not the processor to have 590X9 :mad:.Quote:
Originally Posted by Rol-Co
This 6600 is really fun for aircooling , you can give it 1.77V with 1.80 bios as you said, even with aircooling :D.
For the 557FSB Pi shot, i was at this vcore :woot:
This chip is so special. :confused:
Yes, there's some bug to be fixed, this board is not perfect yet.
Yes i have Fuzion WC set up. I just upped vcore and orthos if fine for nowQuote:
Originally Posted by Spacemaster
is it more stable then asus striker extreme?