Q6600 Kentsfield + Asus 680i Striker Extreme

Continuation from E6600 adventures at http://www.xtremesystems.org/forums/...d.php?t=127331

Seems Asus 680i Striker Extreme still has an FSB limit like all 680i boards when it comes to Kentsfield. Although it seems Asus 680i Striker Extreme does a bit better on FSB front than other 680i boards.

H20 setup:

Quote:

---

Swiftech Apogee -> Radiical Triple fan single pass radiator -> T line -> Swiftech MCP655 @12.25v -> Swiftech Apogee

---

System:

• Intel Core 2 Quad Q6600 QUPT B3 Step 7
• Swiftech Apogee/Radiical Triple Single Pass/MCP655@12.25v Kayl Custom 100W Psu
• 2x 640MB Gainward 8800GTS SLI
• Asus 680i Striker Extreme rev1.0 0402 bios
• 2x1GB OCZ PC8000 Titanium AlphaVX2
• 1x 160GB Seagate 7200.7 SATA NCQ on SATA2 port
• Pioneer DVR-05 DVD Burner
• 600W OCZ EvoStream Modular Power supply

Settings used:

Quote:

---

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1345 (means 336FSB)
Actual FSB (QDR), Mhz: 1344.4
MEM (DDR), Mhz: 807 (means 403mhz speeds)
Actual MEM (DDR), Mhz: 806.7

Vcore Voltage: 1.5 set (1.37v bios/1.36v windows idle/1.34v windows load - 0505 and higher bios fix the vcore issue but 0402 bios more stable for both my E6600/Q6600 cpus)
Memory Voltage: 2.000v
1.2v HT Voltage: 1.3v
NB Core Voltage: 1.55v
SB Core Voltage: 1.50v
CPU VTT Voltage: 1.4v
DDRII Controller Ref Voltage: AUTO
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS: 12
Command Per Clock (CMD): 2 clock (2T)

Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200

---

Asus PC Probe2 reported PSU rail voltages:
Asus PC Probe2 reported voltages vs Digitech QM1538 Digital Multimeter measurements while under load

+3.3v rail = 3.26v vs 3.387v real
+5v rail = 4.78-4.89v vs 5.02v real
+12v rail = 11.78v vs 12.23v real

Seems 336-345FSB is where my Q6600 Kentsfield is for max FSB with 0402 bios.

http://fileshosts.com/intel/Asus/680..._validated.png

Excuse the image dimensions for screenshot @14xx X 11xx but only 82-90KB in size :D

Quad threaded Prime95 v25.1 small FFTs loaded
http://fileshosts.com/intel/Asus/680...95_load_tn.png

Quad threaded Prime95 v25.1 small FFTs post load idle
http://fileshosts.com/intel/Asus/680...ad_idle_tn.png

Seems raising CPU VTT from 1.4v to 1.5v helped but only in conjunction with raising NB volts from 1.55v to 1.65v. 345FSB seems fine so far.

Settings used:

Quote:

---

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1380 (means 345FSB)
Actual FSB (QDR), Mhz: 1380
MEM (DDR), Mhz: 805 (means 402mhz speeds)
Actual MEM (DDR), Mhz: 805

Vcore Voltage: 1.425 set (1.31v bios/1.30v windows idle/1.28v windows load - 0505 and higher bios fix the vcore issue but 0402 bios more stable for both my E6600/Q6600 cpus)
Memory Voltage: 2.000v
1.2v HT Voltage: 1.4v
NB Core Voltage: 1.65v
SB Core Voltage: 1.50v
CPU VTT Voltage: 1.5v
DDRII Controller Ref Voltage: AUTO
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS: 12
Command Per Clock (CMD): 2 clock (2T)

Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200

---

http://fileshosts.com/intel/Asus/680..._validated.png

Quad threaded Prime95 v25.1 small FFTs loaded
http://fileshosts.com/intel/Asus/680...95_load_tn.png

Quad threaded Prime95 v25.1 small FFTs post load idle
http://fileshosts.com/intel/Asus/680...ad_idle_tn.png

Please note different room temps for the 9x336FSB vs 9x345FSB sessions.

Some low cpu clocked 1T memory clocking Super Pi times :)

Settings used:

Quote:

---

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1333 (means 333FSB)
Actual FSB (QDR), Mhz: 1332.8
MEM (DDR), Mhz: 848 (means 424mhz speeds)
Actual MEM (DDR), Mhz: 848.1 but seems cpuz reports 416mhz

Vcore Voltage: 1.425 set (1.31v bios/1.30v windows idle/1.28v windows load - 0505 and higher bios fix the vcore issue but 0402 bios more stable for both my E6600/Q6600 cpus)
Memory Voltage: 2.450v
1.2v HT Voltage: 1.35v
NB Core Voltage: 1.7v
SB Core Voltage: 1.50v
CPU VTT Voltage: 1.4v
DDRII Controller Ref Voltage: AUTO
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

tCL (CAS Latency): 3
tRCD: 3
tRP: 3
tRAS: 8 then 4
Command Per Clock (CMD): 1 clock (1T)

Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200

---

Seems although I set 848.1mhz real memory clock in bios = 424mhz, cpuz in windows reports 416mhz. So I ran with it as is and will redo 424mhz later.

-----------------------------------------------------------------------------------
Starting with 3-3-3-8 1T and advance timings = AUTO
http://fileshosts.com/intel/Asus/680...5m797ms_tn.png

-----------------------------------------------------------------------------------
Advance timings tightened

Advance Memory Settings
tRRD: AUTO left alone = 5
tRC: AUTO tightened to 18
tWR: AUTO left alone = 6
tWTR: AUTO left alone = 8
tRD: AUTO left alone
tRFC: AUTO tightened to 32

http://fileshosts.com/intel/Asus/680...9m297ms_tn.png

-----------------------------------------------------------------------------------
Advance timings tightened

Advance Memory Settings
tRRD: AUTO left alone = 5
tRC: AUTO tightened to 1
tWR: AUTO left alone = 6
tWTR: AUTO left alone = 8
tRD: AUTO left alone
tRFC: AUTO tightened to 22

http://fileshosts.com/intel/Asus/680...5m266ms_tn.png

-----------------------------------------------------------------------------------
Tightened tRAS to 4 and advance timings for single and dual 32M

B]Advance Memory Settings[/B]
tRRD: AUTO tightened to 4
tRC: AUTO tightened to 1
tWR: AUTO left alone = 6
tWTR: AUTO left alone = 8
tRD: AUTO left alone
tRFC: AUTO tightened to 22

Single 32M
http://fileshosts.com/intel/Asus/680...2m922ms_tn.png

Dual 32M
http://fileshosts.com/intel/Asus/680...rpi-32m_tn.png

-----------------------------------------------------------------------------------

Approximately 33 seconds difference between AUTO advance timings and tightened timings at same cpu and memory clocks!


.

Seems my 2GB OCZ PC8000 Titantium Alpha VX2 likes CAS4 better than CAS3. 3-3-3-4 1T can get me to around 428mhz at 2.45v but 4-3-3-4 and 4-4-3-4 1T can get me to around 444mhz at lower vdimm of 2.4v. 32M time for 416mhz 3-3-3-4 1T vs 444mhz 4-4-3-4 1T at same advance timings for 4-1-6-8-22 has 444mhz 4-4-3-4 1T only 0.859 seconds slower :)

Settings used:

Quote:

---

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1333 (means 333FSB)
Actual FSB (QDR), Mhz: 1332.8
MEM (DDR), Mhz: 890 (means 450mhz speeds)
Actual MEM (DDR), Mhz: 888.9

Vcore Voltage: 1.425 set (1.31v bios/1.31-1.33v windows idle/1.31v windows load - 0505 and higher bios fix the vcore issue but 0402 bios more stable for both my E6600/Q6600 cpus)
Memory Voltage: 2.400v
1.2v HT Voltage: 1.35v
NB Core Voltage: 1.7v
SB Core Voltage: 1.50v
CPU VTT Voltage: 1.4v
DDRII Controller Ref Voltage: AUTO
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

tCL (CAS Latency): 4
tRCD: 4
tRP: 3
tRAS: 4
Command Per Clock (CMD): 1 clock (1T)

Advance Memory Settings
tRRD: 4
tRC: 1
tWR: 6
tWTR: 8
tREF: AUTO
tRD: AUTO
tRFC: 22
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200

---

http://fileshosts.com/intel/Asus/680..._validated.png

http://fileshosts.com/intel/Asus/680...3m781ms_tn.png

i don't even want to bother with 1T on evga.......i tried 430>425>420>415>410.......3xx and just keep getting test#5 errors in memtest....i just gave up :rolleyes:

Quote:

---

Originally Posted by dinos22

i don't even want to bother with 1T on evga.......i tried 430>425>420>415>410.......3xx and just keep getting test#5 errors in memtest....i just gave up :rolleyes:

---

tried raising vdimm and NB ? for 400-440mhz 1T you need around 2.35-2.55v vdimm

Next up bumped FSB a bit so could hit the unlinked divider for 453mhz 4-4-4-4 1T at 2.45v :)

Settings used:

Quote:

---

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1360 (means 340FSB)
Actual FSB (QDR), Mhz: 1360
MEM (DDR), Mhz: 908 (means 454mhz speeds)
Actual MEM (DDR), Mhz: 906.8

Vcore Voltage: 1.45 set (1.33v bios/1.33v windows idle/1.31v windows load - 0505 and higher bios fix the vcore issue but 0402 bios more stable for both my E6600/Q6600 cpus)
Memory Voltage: 2.450v
1.2v HT Voltage: 1.35v
NB Core Voltage: 1.7v
SB Core Voltage: 1.50v
CPU VTT Voltage: 1.4v
DDRII Controller Ref Voltage: AUTO
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS: 4
Command Per Clock (CMD): 1 clock (1T)

Advance Memory Settings
tRRD: 5
tRC: 5
tWR: 6
tWTR: 8
tREF: AUTO
tRD: AUTO
tRFC: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200

---

http://fileshosts.com/intel/Asus/680..._validated.png

http://fileshosts.com/intel/Asus/680...1s391ms_tn.png

nothing helps

nice work!.. whats with low kenty clocks on the striker?

come on George get u some controller/s and put that Q6600 through some hard benching.. :D

btw, when Q6600 on abit quadgt?

low clocks is all 680i boards have low max FSB limits.. striker limit is 345FSB so 9x345FSB max... if you had unlocked multi on QX6700 you could up multi to say 10x or 11x 345FSB, but Q6600 fixed at 9x :(

Q6600 on Abit AB9 QuadGT.. much later hehe.. but QuadGT soon :)

have to spread my time around a few boards LOL

Quote:

---

Originally Posted by eva2000

low clocks is all 680i boards have low max FSB limits..

---

Any theories as to why this is and/or if a BIOS fix might ultimately appear?

Quote:

---

Originally Posted by eva2000

low clocks is all 680i boards have low max FSB limits.. striker limit is 345FSB so 9x345FSB max...

---

not true for me.
I can get my Quad to 8 x 450 without much trouble of my 680i.
but at that speed, stability is hard to maintain since its so damn hot.

Quote:

---

Originally Posted by Kunaak

not true for me.
I can get my Quad to 8 x 450 without much trouble of my 680i.
but at that speed, stability is hard to maintain since its so damn hot.

---

What board/proc are you using? What BIOS settings?

http://www.xtremesystems.org/forums/...&postcount=286

theres a person right there doing 7 x 450 with a QX6700.

right now, my quad is in my P5B Deluxe.
my P5B is all set up for sub zero cooling and I really dont want to move that board, till either the Asus P5N32-E SLI can do above 550 FSB...
or till I get another 8800 GTX for SLI.
till then, I still use my P5B Deluxe since its already set up for my main PC.

when I tried my Quad in my Asus 680i. I tried it with bios 0302 and 0602.
in both cases it wasnt hard to get 450 with that CPU... it was hard to keep it stable cause of the heat output, and air cooling.

Quote:

---

Originally Posted by Kunaak

when I tried my Quad in my Asus 680i. I tried it with bios 0302 and 0602.
in both cases it wasnt hard to get 450 with that CPU... it was hard to keep it stable cause of the heat output, and air cooling.

---

Eva, I wonder why you are getting such poor results... Have you tried these BIOS versions with yours?

Kunaak, when you get some time, it would probably help a lot of people if you could start a thread on your Quad experience with the Striker.

Quote:

---

Originally Posted by Kunaak

not true for me.
I can get my Quad to 8 x 450 without much trouble of my 680i.
but at that speed, stability is hard to maintain since its so damn hot.

---

i never tried 8x450FSB with Q6600 so maybe it would of worked ? i worked solely on 9x multi

shamino has stated kentsfield is can run higher fsb at lower multi/cpu clocks the problem is at the higher end closer to 4ghz

Remember, my 345FSB i'm testing is straight boot into windows and quad prime stable... i didn't test suicide runs or 1M max. But it could be difference between Q6600 and QX6700 ? or different bioses ? i only tested with 0402 bios

Can I put in a vote for more Q6600 testing and OC'ing? When this chip hits the $500 price range in a couple of months it might be a super hot buy if it can be overclocked to the 3.4 GHz + range!

Quote:

---

Originally Posted by eva2000

i never tried 8x450FSB with Q6600 so maybe it would of worked ? i worked solely on 9x multi

shamino has stated kentsfield is can run higher fsb at lower multi/cpu clocks the problem is at the higher end closer to 4ghz

Remember, my 345FSB i'm testing is straight boot into windows and quad prime stable... i didn't test suicide runs or 1M max. But it could be difference between Q6600 and QX6700 ? or different bioses ? i only tested with 0402 bios

---

haha... if you have a clockgen for me to use, tell me.
I'd like to be able to get a working clockgen for the 680i.
so just like anyone else, I had to work with bios only.

ew with water and you're getting those temps + that speed?

weird clockgen works for me on striker with e6600 but doesn't help with max fsb limit i have with q6600

as to temps not sure must be striker thing as q6600 at 3600mhz on p5b deluxe same temps http://www.xtremesystems.org/forums/...41&postcount=5

Quote:

---

Originally Posted by eva2000

tried raising vdimm and NB ? for 400-440mhz 1T you need around 2.35-2.55v vdimm

Next up bumped FSB a bit so could hit the unlinked divider for 453mhz 4-4-4-4 1T at 2.45v :)

Settings used:

---

Hi Eva,

i am using the P5N32 right now and one strange thing i observe using the unlink is ... when i want to run 800-1000mhz 5-5-5-15 for my ram (D9 micon), i keep bumping errors failing prime blend within min but when i set to 500+ mhz *actual 2XXmhz*, i can pass blend / large FTT

vdimm is 2.4v
NB = 1.4-1.5v (no matter how high i set, i still fail)

With your experience, do u know what wrong? :)

Quote:

---

http://www.xtremesystems.org/forums/...&postcount=286

theres a person right there doing 7 x 450 with a QX6700.

---

LOL, that's me :p:

I stuck at 340Mhz with the DFI RD600.
Up to 450Mhz with the Asus Commando (965P).
Tonight (or tomorrow) I'll try it with an Asus P5N32-E SLI.
On monday I'll try also with a D975XBK2.

Quote:

---

Originally Posted by krampak

LOL, that's me :p:

I stuck at 340Mhz with the DFI RD600.
Up to 450Mhz with the Asus Commando (965P).
Tonight (or tomorrow) I'll try it with an Asus P5N32-E SLI.
On monday I'll try also with a D975XBK2.

---

Awesome, but it's also interesting to know what you find as the max FSB at the default multiplier (x9) as well as with a lower multi?

Are you finding the Q is FSB limited or GHz limited?

It's not Ghz limited, that's for sure as I put it to 3.9Ghz in the Asus Commando (Aircooled). It does 3.4Ghz at 1.30V.

The highest FSB has been found using the 6X multiplier.

I have just tried the Asus P5N32-E SLI and uuh... i got no luck to make it boot with 2 sticks of ram in dual channel :stick: It only boots with 1 stick or with 2 in single channel :confused: Tired to try to make it boot I have mounted the Intel BadAxe2 now. I'm installing drivers right now. Will tell you later.

I have been running this setup a few days now, and looking for some recommendations.

Antec 900 case
Asus Stryker Extreme BIOS 1102
QX6700 cooled by Ultra-120 Extreme /w Scythe S-FLEX SFF21F 12cm fan
2x1GB Corsair 8500CL5
2x BFG 8800GTS OC 640MB DDR3
Thermaltake Toughpower 700W
1 NEC DVD burner
1 320GB WD SATA HD
Vista Premium

I have been able to get a stable 24h overclock with following settings:

AI Tuning: Manual
Nvidia GPU Ex: Disabled

FSB - Memory Clock Mode: Linked
x FSB - Memory Raio: 3:2
FSB (QDR), Mhz: 1400 (means 350FSB)
Actual FSB (QDR), Mhz: 1400
MEM (DDR), Mhz: 950 (means 475mhz speeds)
Actual MEM (DDR), Mhz: 950

Multi: 10x
CPU SPEED 3500Mhz

Vcore Voltage: AUTO
Memory Voltage: 2.25v
1.2v HT Voltage: 1.30v
NB Core Voltage: 1.50v
SB Core Voltage: AUTO
CPU VTT Voltage: AUTO
DDRII Controller Ref Voltage: AUTO
DDRII Channel A Ref Voltage: AUTO
DDRII Channel B Ref Voltage: AUTO

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS: 8
Command Per Clock (CMD): 2 clock (2T)

Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
tRD: AUTO
tRFC: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): ENABLED
Execute Disable Bit: Disabled
Virtualization Technology: ENABLED
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: AUTO

Any higher than +5 FSB with AUTO vCore would cause windows to hang durring boot.
Using CoreTemp .95 temps of CPU range from 41 - 60 (idle - load using Prime95)
Should I stop at that or is there a way to boost FSB without making tems go any higher?
Another question: I also have E6600 and E6700 chips right now(E6700 is in P5K Deluxe and E6600 in a P5W DH), would you recommend using a dual core chip in Striker mobo over the QX6700? I see peeps are getting better OC's for Quads on P5K Deluxe.
Also memory performance on Stryker is kind of dissapointing compared to 975 or 935.

Any feedback greatly appreciated.

QX6700 you have unlocked multi so take advantage of it if you want to run it on striker ;)

But if you want high FSB you probably need Asus P5K Deluxe :)

Or wait for Bios 1202, which is loved by Hipro5 for his quad overclocking, release is imminent ( some even say this friday...)

On Striker Extreme i can OC my Q6600 only max to 375x9 ... nothing above 375MHz is not rock stable ...

THX guys. I guess I'll wait for the new BIOS then, before swapping CPU's.

One quick question, my System will sometimes pause(nothing is responding but mouse still works) for 5-10 sec at the time and then back to normal in Vista Premium. Does anyone witness this behaviour?

So there hasnt been an update to the striker like evga did to their 680i by releasing an "A1" version ?

On my A1 EVGA 680i, booting the QX6700 @ 400*8 will not make it into windows even.

Well that doesnt seem promising seeing as i will be upgrading to a q6700 is a couple of months. I already have the A1 version but maybe the new striker bios update will dramatically improve quad core overclocking.

New Bios is up. 1202

ftp://ftp.asus.com.tw/pub/ASUS/mb/so...ker%20Extreme/

Will flash when I'm at home ... hope this is the rocker !!! (again )

I'm in a holding pattern until the July 22nd price cuts to purchase a Q6600. I have 2x E6600's, one is in a Biostar Tforce P965 motherboard (good board so far) and the other is in a Asus P5K Deluxe mobo. Do you think it would be beneficial for me to get some flavor of the P5K chipset or just use one of the P965 chipsets? (if it would, which board would be better?)I would like to get the quad to a mild OC' of 3.0 GHz cool and stable for 24/7 folding. (I know it's the luck of the draw for OC'ing) Once again, thanks eva2000 you always have some very informative posts. :up:

Edit: Oh yeah, I don't know if this's off topic or not (if it is I appologize) Would WC'ing be better for the quad?

my mobo is in RMA right now. after killing 1 memory stick and rendering A1 and B1 memory slots dead, so can't check it now(never went over 2.35v for memory. :( ). But once I get it back I wonder how much better it will be with this new BIOS.

Well it includes the changes of the bios 1201 (never got hold of that one )that Hipro 5 liked so much for his board and quadcore so it must be good or hopefully again an improvement....