http://tweakers.net/meuktracker/1357...-update-2.html
:D
testing in a sec :)
Printable View
http://tweakers.net/meuktracker/1357...-update-2.html
:D
testing in a sec :)
now if we can get a nvidia 680i version.
I could have swore that Alex stopped working on MBM5 long ago...Quote:
Originally Posted by lawrywild
Can someone translate that page? I don't even know what language it is...
-FCG
http://www.majorgeeks.com/Motherboar...e_2_d5261.html
Just looks like he decided to buy the same motherboard as me :D lol
there isn't a P5WDH option though
I used P4P800 and so far have CPU Mhz, Cpu Temp, CPU Fan Speed, 3.3v, 5v, 12v all working :woot:
MBM Update 2 + Coretemp plugin by FCG = :woot:
http://img178.imageshack.us/img178/7...empmbm5cd5.png
That's what I'm talking about! I am very close to a final release at which point the plugin will be available for download.
-FCG
:D :D :D I added an Option in the Settings Section/Voltage Configuration for the P5WDH and calibrated all the voltages to match mine multimeter..........
http://www.xtremesystems.org/forums/...1&d=1164989676
ThorLite please post your fan .ini please :)
It's Dutch and so am I :p: .Quote:
Originally Posted by freecableguy
To summarise it:
The maker of the program has siezed the production of this program for two years now, but he has updated it recently (because this guy bought a new mainboard and wanted it updated for himself, selfish guy huh!:p: ). You have to have MBM version 5.3.7.0 already installed, otherwise the update won't work. It adds support for the listed changes!
I havent touched the fan.ini settings in the config wizard i used the P4C800-E Deluxe option.
Quote:
Originally Posted by freecableguy
Dutch :D
AvK stopped developping MBM 2 years ago but now theres an update supporting some new hardware. MBM used to be THE prog to monitor and show temp/volt/rpm. Update @ MG website due to writers page bein down. Version 5.3.7.0. has to be installed first to be able to install this update. Changelog:
Updated:
* MBM 5 Core DLL : 5.3.7.2
Added:
* Intel ICH7 Support
* Intel ICH8 Support
* Winbond W83627EHG Support
* Winbond W83627EHF Support
Can you take some screenshots of how your fans are configured then please? :cool:Quote:
Originally Posted by ThorLite
Ok here are mine fan settings Fan 2 and 3 are the same.
Anyone who tried it with a P5B Deluxe, or maybe want to test it? :)
Nice find, lw and keep up the good work, fcg!Quote:
Originally Posted by freecableguy
Really looking forward to going back to MBM after trying out Speedfan recently, somehow I still love the detailed MBM high/low interface.
Arr finally a program we all know and love to use instead of an ANUS PROBE :clap: :banana: :woot: :D
i just cant get it working on my P5B Dlx.....i
anyone test it @ a p5w64?
Quote:
Originally Posted by Millyons
^^ :(
Definately causes problems with vcore on the P5B. I've gone back to the last real release. Works great for me. This, I suppose, really is just for P5W DH guys....
-FCG
MB Monitor v5.3.7.2 (P4C800-E profile selected)
- P5WDH BIOS 1602
- QX6700 quad Core2
This thing won't report core temps on my Biostar TForce 965PT, which has ICH8. :(
I saw something about needing MBM Update 3? Where is that?
Screenie:
http://img228.imageshack.us/img228/2...creeniegm8.gif
No temps reported. Followed directions in the readme (I think). :confused:
you are doing something wrong, i dont see any sensor 9, or 10, you got to turn on those sensors for c2d dts temps
I renamed them Core 0 and Core 1 as the instructions indicated. :confused:
Quote:
Originally Posted by Millyons
Enable sensors used for displaying the core temperatures selecting them, starting with 'Sensor 24' (with decreasing sensor numbers for additional cores), from the 'MBM 5 sensor' dropdown and then setting 'Should display board sensor' dropdown to 'Custom'. Remember, starting with version 1.1: Core 0 is Sensor 24, Core 1 is Sensor 23, Core 2 (if detected) is Sensor 22, etc. all the way down to Sensor 9 for Core 16 (again, if detected).
OK, but lists as 8C when my real temps are like -20C. Doesn't like negative temps? :confused:
Download the newest version (v1.1) along with MBM5 Update 3 from www.thetechrepository.comQuote:
Originally Posted by uclajd
Its important to remember that the Core Temperature plugin will only working within the reporting bounds of Intel's DTS system. If you want to use MBM5 to apply a manual offset you certainly can...