Do you want to change your PS3 Hard Drive?
Look here if you want to do what this man has done :D
[Game] PLAYSTATION3
2006/11/10 19:40 supplementation
Each time when linkit has stretching in you, access increases at a stroke and the �＜�� �� ��, it is to be decided that the netlife.gr.jp server whom it is operational with ADSL is pleasant and (apache has started also 103), in approximately 19:00 of 11/10 just the graphics data moving to ODN, recovery it moved apache. Now being able to peruse properly, that you think whether the �� it is it is not. Annoyance we applied.
Tomorrow is sale day. Extreme shortage of goods it seems, is, but it guaranteed by example.
Being to buy also the controller and the memory card adapter of the difference sale, it does, but the USB cable being attached in both, increase it is. As for the one which is not the stock cable without forgetting that you buy together.
Those where you buy are 20GB edition. Speaking clearly, HDD capacity is to be too small.
Is because,
HDD for conversion (120GB) you bought.
Below is conversion procedure.
The HDD conversion of PLAYSTATION3 the case where it does, it includes also the verification, there is some kind of risk of, asks on all self responsibilities.
Especially, after (I just starting verification of the minimum doing, being conversion to do directly, did not make the air but) am playing, when conversion it does, consideration is necessary concerning the backup of the data.
Necessary ones
* HDD for conversion (2.5 inches, serial ATA)
* Remainder be too small plus driver
* However (necessity it is not, the one which is convenient) the negative driver
* Courage
1. First the power of PLAYSTATION3 is turned off, the electrical outlet is pulled out. But basis.
2. HDD of PLAYSTATION3 is loaded onto the left side when the substance is designated as horizontal ranging considered as the front.
It is difficult to see because the substance is black is, but being to be a cover where the seal, HDD is stretched you open that. Because in my nail it was difficult to open, thrusting the negative driver to such as basis of the arrow, you opened with main point of the lever. You do not insert excessive power and also the �� is all right.
3. When the cover is opened, such feeling.
The blue screw the screw of one and silver has been attached two, that and the knob.
First, just the blue screw is removed. (As for the screw of silver not removing yet)
4. Next, raising the knob lightly, it makes HDD the right slide.
5. Furthermore, this time when the knob is pulled on, it can remove HDD.
Screw two of the silver which is not removed some time ago is removed.
6. It meaning that the screw is two even on opposite side, you remove this.
With this, HDD can be removed from the mounter.
7. HDD which you remove. It was ST920217AS of Seagate.
8. The HDD slot of PLAYSTATION3. (It is difficult to see, is, but the connector and the power source connector of SATA have come out)
9. Some time ago conversely, HDD for conversion is installed in the mounter, the screw of 4 places is stopped.
10. HDD is inserted in the slot of PLAYSTATION3, until the feel which sticks to the connector securely does it makes slide on the left side.
11. Stopping the blue screw, it does again to set the cover. It is end with this.
12. When PLAYSTATION3 is restarted, in order the format to do, it meaning that message is indicated, "please be and" select.
13. After being able to use normally, the air the �� way does.
14. Substance information after the conversion. Properly it is recognized as 120GB.
Entirely have allotted the partition to PLAYSTATION3 those where the number of the left side is the small awakening in 97GB and the sensitivity in spite, become the just a little air, but...
System software was at purchase point in time 1.00, but it tried when ridge 7 probably to play being to be called update margin it renewed. Here is the feeling which is close to PSP.
Being defeated
According to the official sightand the manual of PLAYSTATION3, there is the description like whether it can output with the AV multiple cable with only 480p or 480i of, but really it seems that is also exception.
Using in inside, �� is the AV multiple terminal being attached hi-vision Brown tube television of SONY (KD-28HR500B), but when in this television it does "that it is", using the AV multiple cable, it can indicate with 720p or 1080i.
As for method being simple, when it connects the AV multiple cable, "setting" -> "display setting" -> with the occasion where the terminal of television side is chosen "image output setting", is not "AV multiple" and the "component or D terminal" is chosen, (connecting, therefore �� the AV multiple cable unless there is a reason which appears first you thought, it is but) just is.
Continuing, when it chooses 720p or 1080i with resolution of the television, it is indicated why without problem.
As for going well you think that is just WEGA of hi-vision correspondence, but for the reference.
Source
