Team Skootterit, E6600 100% OC, CO2

We had very nice OC weekend with guys (team members) again :D
Team Skootterit = Dani, boble76, Electroid and mikkomaa

Setup was:

ASUS P5B Deluxe (vMCH, vMEM, vDROOP, vCORE), NB watercooled by Swiftech MCW30, NB @ 2.01V.
E6600 L629A (lapped) @ 1.77V.
CellShock DDR2 PC2-8000 2x1024mb, 4-4-4-8 @ 2.85V.
WinXP Pro + SP2.
Half solid alu container, 61mm from bottom is solid with small center pole.
DryIce with methanol

SuperPI 1M
http://koti.mbnet.fi/boble76/TEAM_SK...1M_10.593s.jpg

SuperPI 8M
http://koti.mbnet.fi/boble76/TEAM_SK...min13.828s.jpg

SuperPI 32M
http://koti.mbnet.fi/boble76/TEAM_SK...min46.657s.jpg

Hexus PiFast
http://koti.mbnet.fi/boble76/TEAM_SK...xus_20.42s.jpg


Like you can see, Hexus and SP32M was not tested much, I think SP32M with 530x9 should do much more damage to result ;)
..or Hexus_PiFast with 530x9, maybe high 19s.:rolleyes:
We were absolute too drunk to think clear :slap: :D

Setup pic's etc. is uploaded till tomorrow here at first post, stay tuned:fact:

**Setup pic's**

I feel so sick after that weekend.. LOL! :D
Next time with LN2 and copper-solid.
Thanks guyes! Awesome.

got pics of the rig?

Quote:

---

Originally Posted by Dani

Setup pic's etc. is uploaded till tomorrow here at first post, stay tuned:fact:

---

Yes, will do it as soon as possible

nice results :P

Great work here so far my friend :D

Interesting to see Vmch@2.01V, did it give a real improvement?

Quote:

---

Originally Posted by before

Great work here so far my friend :D

Interesting to see Vmch@2.01V, did it give a real improvement?

---

vMCH 2.01= we booted @ 398FSB ;)

btw. Dani 2.4G -> 4.8G = 100% oc :D, edit 1:st post.

Offtopic: Opteron 146 @ 3.45G @ R.I.P, LOL
some noob tricks ;)

Some setup-pictures
In the first picture is a startbox I made with mikkomaa. It was very easy and safety to boot without screwdriver. (in drunk).

Yellow/black tape was VERY TIGHT around the container.:up:

Nice results.:toast:

Yes awesome results.

Quote:

---

Originally Posted by Boble76

Some setup-pictures
In the first picture is a startbox I made with mikkomaa. It was very easy and safety to boot without screwdriver. (in drunk).

Yellow/black tape was VERY TIGHT around the container.:up:

---

Nice pictures... :)

Insulation of the mobo is very clean.

I liked the insulation 2, nice pics and nice results.
do give us more :D

I like to made clean and airproof isolation, that's maybe the most usefull thing you can do before benching.
Here isolation on DFI Expert before LN2 benching

The ASUS-MoBo isolation was simply the best I've ever seen, it worked very fine and there wasn't condensate anywhere. I think it took about 2h making those isolations on MoBo and container. It was worth of it. :slap:

Very good, our Finnish stars are shining :clap:

sweet oc gues. seeing something like this makes me broud to be a Finn, keep on torturing those chips.

sorry for the offtopic but i have comment on something i saw in those pictures.
how the hell can you gues drink somethink that tastes like......worst than piss (meaning KOFF beer), KARHU is much better ;)
BTW nice jop with the insulation, that thing fits perfectly.

Hey bro :D, dont blame KOFF, because Karhu is the same sh_it, you dont even know where Karhu is made...KOFF-Karhu=same piss ;)

Dani, I know this is off topic, but I just wanted to point out that the cat in your avatar is totally hot.

Very nice work :toast:

Great results :toast:

regards

Thanks to all :toast:

..hmm, my cat is HOT :rolleyes:

Dani your were right koff and karhu are the same piss. they are made in the same factory in the lovelly city of Pori. heres the proof,

:fact:http://www.koff.fi/fi/tuotteet/oluet.html I fell so dirty :D

I know, but it's good beer :slap: :D
They bottles in Kerava and Pori, so slightly wrong again :rolleyes:

http://www.adressit.com/porin_nalle

half right. thats good enough for me;)

LOL!
Next time we'll have some Sandels-beer. It taste better that piss.