am2 ddr2 dividers tool [binary]

Ok I needed more info about the dividers for my orleans 3000+ oc, there are already a couple of tools available (mostly http://math.gogar.com/athlon64.cgi?showtable=1 and http://xtremesystems.org/forums/show....php?p=1558321 ) but i always prefer single exe's [binaries :) ]. So I did this. :D

Check it, report wrong numbers [if any] :toast:
it's 175kb, no dependencies [single exe]

*Now with temp reading á lá coretemp*

screenie:
http://kimero.com.ar/img/am2tools.png
http://kimero.com.ar/img/am2tools_temp.png


I hope its useful to anybody.

updated [v0.70]

- window appears center-screen
- also shows cpu/core final mhz result.

updated [v0.83]

- some aesthetics
- icon :D
- longer bars for higher precision on HTT


updated [v0.90] 1-nov-06

- As entering an exact htt number with the mouse may me dificult, you can now click on the htt mhz and enter exact numbers.
- Added combobox with some Orleans default values, will show "custom" when changed.


updated [v1.10] 12-jan-07

- Added Cpu Temp reading.
- Filled cpu list.
- lots of small fixes


links:
http://kimero.com.ar/pro/am2tools.rar

Quote:

---

Originally Posted by Kimero

Ok I needed more info about the dividers for my orleans 3000+ oc, there are already a couple of tools available (mostly http://math.gogar.com/athlon64.cgi?showtable=1 and http://xtremesystems.org/forums/show....php?p=1558321 ) but i always prefer single exe's [binaries :) ]. So I did this. :D

Check it, report wrong numbers [if any] :toast:
it's 175kb, no dependencies [single exe]

screenie:
http://kimero.com.ar/am2tools.png


I hope its useful to anybody.

links:
http://cablemodem.fibertel.com.ar/kimero/am2tools.rar <- first try here [isp]
ftp://kimero.com.ar:5041/am2tools.rar <- me [capped at 15kb/s]

---

really nice tool. been waiting for something like this. seems pretty correct for me so far.:toast:

it would be nice though to have the cpu clock speed that would result as well. so you dont have to get out the calculator.:D

ummm It is doing something weird on 1024x800 screen resolution
More specifically it doesn't show anything on the screen

Quote:

---

Originally Posted by WeStSiDePLaYa

really nice tool. been waiting for something like this. seems pretty correct for me so far.:toast:

it would be nice though to have the cpu clock speed that would result as well. so you dont have to get out the calculator.:D

---

makes sense, give me 10 minutes :)

Quote:

---

Originally Posted by nn_step

ummm It is doing something weird on 1024x800 screen resolution
More specifically it doesn't show anything on the screen

---

my bad, i positioned the window very low and i'm using 1280x1024, so you get it off screen. download v0.7 when i post it :)

updated [v0.70]

- window appears center-screen
- also shows cpu/core final mhz result.


links on first post

Quote:

---

Originally Posted by Kimero

updated [v0.70]

- windows appears center-screen
- also shows cpu/core final mhz result.


links:
http://cablemodem.fibertel.com.ar/ki...m2tools070.rar <- first try here [isp]
ftp://kimero.com.ar:5041/am2tools070.rar <- me [capped at 15kb/s]

---

now it is perfect. great compact tool that does everything it needs to! good work!

:toast:

thnx for this, it's very helpful :toast:

updated [v0.83]

- some aesthetics
- icon :D
- longer bars for higher precision on HTT


links on first post :toast:

And if anyone has anything interesting that could be added, I'm all ears.:stick:

Quote:

---

Originally Posted by Kimero

updated [v0.83]

- some aesthetics
- icon :D
- longer bars for higher precision on HTT


links on first post :toast:

And if anyone has anything interesting that could be added, I'm all ears.:stick:

---

I like the v0.83 name you just had to ad that 3 :D
and it looks better now ;)

updated [v0.90] 1-nov-06

- As entering an exact htt number with the mouse may me dificult, you can now click on the htt mhz and enter exact numbers.
- Added combobox with some Orleans default values, will show "custom" when changed.


links on first post as always :toast:

I will probably add the rest of the am2 line to the dropdown menu, but that would do for now.

I'm still open for suggestions :coffee:

Hey, long time no see -> update

updated [v1.10] 12-jan-07

- Added Cpu Temp reading.
- Filled cpu list.
- lots of small fixes


links on the first post as always. :toast: :coffee:

Hey, nice tool, but Brisbane 3600+ with 400 divider is off. The actual divider is 10, but your tool reports it as 9.

yeah wrong divider for my 3600+ brisbane and bad temp

http://akijikan.chattablogs.com/archives/AM2tools.gif

Well core readings are off for Brisbanes in all Core temperature programs. I think AMD changed something and hasn't updated their documentation.

ok my bad on the dividers, now they should all be correct. The fact that x.5 dividers were used broke the way i was doing the calc [damn integers]. Fixed

About the brisbane temp, could anyone with one check if the delta is fixed against other temp programs?

[for example, if this always says 3° like in the screenshot while the correct is 43°, and then on load is 8° here while 48° on other tool, that would be a fixed 40 delta]

Otherwise i'll have to check what others are doing about this.

links point to lastest version.

links:
http://cablemodem.fibertel.com.ar/kimero/am2tools.rar <- first try here [isp]
ftp://kimero.com.ar:5041/am2tools.rar

I think something buggy is going on with his temps, mine just read low. This has been verified in most software that reads core temperatures, your program, CoreTemp, and SpeedFans core temperature are all about 15C off. I think AMD did change the constant without telling anyone, problem is that there is no accurate Core Temperature reader to compare and find out exactly what the delta is.

My mobo sensor is reporting 49-50C as my load temp wherease CoreTemp and your utility report 35,36 C.

Hey man, the 533 divider is off with version 1.15 on my system. Divider is /7, your utility reports it as /8.

i'll give this a try tonight on my 3600 brisbane and Abit NF-M2 with gskill 6400 HZ's

maybe a x64 compatible exe will help...
"could not install driver"
Running XP x64

This might help, official divider table from AMD:
http://img266.imageshack.us/img266/1...amclockcz5.gif
http://www.amd.com/us-en/assets/cont...docs/31119.pdf

Nice little app :toast:


thanks Kimero :clap:

what about brisbane x9.5

thanks

(sorry for the delay anyway, exams and all that)

update v1.20

*all brisbane used .5x multipliers added
*as pointed by funnyperson1, 9.5x with ddr533 should give 7, even if that makes it 542mhz, over the 533mhz default "limit".

I assumed it was 8 due to that. (i don't have a brisbane). All values should now be correct, please report otherwise.

http://kimero.com.ar/am2tools.png

links:
http://kimero.com.ar/pro/am2tools.rar

in windows XP x64 edition i got:
"Could not install system driver"

Quote:

---

Originally Posted by Kimero

(sorry for the delay anyway, exams and all that)

update v1.20

*all brisbane used .5x multipliers added
*as pointed by funnyperson1, 9.5x with ddr533 should give 7, even if that makes it 542mhz, over the 533mhz default "limit".

I assumed it was 8 due to that. (i don't have a brisbane). All values should now be correct, please report otherwise.

---

Thanks Kimero, I'll report back tomorrow re my Brisbane 3600+ :clap: :up:

Quote:

---

Originally Posted by Kimero

(sorry for the delay anyway, exams and all that)

update v1.20

*all brisbane used .5x multipliers added
*as pointed by funnyperson1, 9.5x with ddr533 should give 7, even if that makes it 542mhz, over the 533mhz default "limit".

I assumed it was 8 due to that. (i don't have a brisbane). All values should now be correct, please report otherwise.

---

Mem. freq. will never go beyond 533 MHz if you set that value in BIOS!

Thanks for the app ;)

Shouldn't it be 10.5 x 200Mhz for the AM2 X2 4000+ :confused:

Could someone explain why in some monitoring programs when it tells the CPU temp it will be around 35 C, but when it shows the individual cores it will be around 15 C for each. SpeedFan shows right now shows my CPU Temp to be 33 C but then it has a single core temp of 12 C? Are you supposed to add the core temps to get the overall CPU temp? thanks