Kingbox DDR2-1066 (8 layer pcb) 2.35v @1200 & 2.20v 800 3.3.3.4

Printable View

10-22-2006, 10:06 PM
hicookie

Kingbox DDR2-1066 (8 layer pcb) 2.35v @1200 & 2.20v 800 3.3.3.4

Kingbox DDR2-1066 (8 layer pcb) 2.35v @1200 & 2.20v 800 3.3.3.4

New 8 layer design come from taiwan's memory module manufactor
http://pic.xfastest.com/hicookie/ddr...ingbox_box.jpg
memory (8 layer/ dual pcb coloer of purple/red)
http://pic.xfastest.com/hicookie/ddr...gbox_stick.jpg
ICes (D9GMH)
http://pic.xfastest.com/hicookie/ddr...kingbox_ic.jpg

CPU:X6800 RETAIL
MOBO:P5B-E PLUS 1.01G(MDO VCORE&VDROP) BIOS:1080 MCH:1.65V FSB:1.3V
RAM:KINGBOX DDR2-1066 512X2(D9GMH)
VGA:MATROX 8MB PCI
PSU:ZIPPY 850W G1
HD:WD 360GD RATPOR

Test bed
http://pic.xfastest.com/hicookie/ddr...12/testbed.jpg

Specail LED debug
http://pic.xfastest.com/hicookie/ddr...estbed_led.jpg

SPD
http://pic.xfastest.com/hicookie/ddr...spd%20copy.gif

Cas 3 performance
DDR2-800 3.3.3.4 sp2004 2.20V
http://pic.xfastest.com/hicookie/ddr...p2004_6min.jpg
running 2 hours , very stable
http://pic.xfastest.com/hicookie/ddr...004_2hours.gif

DDR2-800 3.3.3.4 sp2004 2.20V dual PI32m pass
http://pic.xfastest.com/hicookie/ddr...pi32_begin.gif

http://pic.xfastest.com/hicookie/ddr...i32_finish.gif

Cas4 performance
2.3V DDR2-1066 4.4.4.4 CPUZ
http://pic.xfastest.com/hicookie/ddr...4444_2230v.gif

2.3V DDR2-1066 4.4.4.4 Sp2004
http://pic.xfastest.com/hicookie/ddr...30v_sp2004.gif

2.3V DDR2-1066 4.4.4.4 Dual Super PI 32m
http://pic.xfastest.com/hicookie/ddr...pi32_begin.gif

http://pic.xfastest.com/hicookie/ddr...v_pi32_end.gif

Cas5 performance
2.35v DDR2-1200 5.5.5.15 cpuz
http://pic.xfastest.com/hicookie/ddr...1200_55515.jpg

2.35v DDR2-1200 5.5.5.15 sp2004 3 hours long time running
http://pic.xfastest.com/hicookie/ddr...2004_3hour.jpg

2.35v DDR2-1200 5.5.5.15 dual super pi 32m
http://pic.xfastest.com/hicookie/ddr...pi32_begin.jpg
http://pic.xfastest.com/hicookie/ddr...v_pi32_end.jpg
10-22-2006, 10:23 PM
TaPaKaH

:eek:
Nice result for value RAM !
How much do they cost ?
10-22-2006, 10:32 PM
S&M

lol , who said it's a value ram ?!

Great Results and nice work Hicookie !
10-22-2006, 10:33 PM
hicookie

Quote:

Originally Posted by TaPaKaH

:eek:
Nice result for value RAM !
How much do they cost ?

i pay $87*2 for a kit :D
10-22-2006, 10:35 PM
hicookie

Quote:

Originally Posted by S&M

lol , who said it's a value ram ?!

Great Results and nice work Hicookie !

not extreme limited yet, now running higher frequency:banana:
10-22-2006, 10:37 PM
MACMAC

Very VERY nice results, especially for price :cool:

Voltage is so low too! :slobber:
10-22-2006, 10:44 PM
hicookie

lol, i just figure 2.35v 1260 cas5 is pretty easy
10-22-2006, 10:55 PM
hicookie

OMG!2.35v 1200 is too easy
2.35v DDR2-1270 555-15 priming now
http://pic.xfastest.com/hicookie/ddr...v_1270_cl5.gif
10-22-2006, 11:10 PM
Revv23

Wow, looks like the standard is set again.

Were these handpicked?

Throw spme voltage at them!!!
10-22-2006, 11:14 PM
hicookie

Quote:

Originally Posted by Revv23

Wow, looks like the standard is set again.

Were these handpicked?

Throw spme voltage at them!!!

haha, no way, it's a small manufactor, can't do the handpicked.
i just bought 2 radom sticks:banana: :banana:
10-22-2006, 11:22 PM
eva2000

Quote:

Originally Posted by hicookie

i pay $87*2 for a kit :D

dam that's cheap.. where can i get some :D

<-- looks at my member title :o LOL
10-22-2006, 11:27 PM
hicookie

Quote:

Originally Posted by eva2000

dam that's cheap.. where can i get some :D

<-- looks at my member title :o LOL

lol, it's only sell for taiwan and china as i know:slapass:
10-22-2006, 11:31 PM
Revv23

i think its time for hicookie to do a massbuy for everyone!! :)

edit - see if you can do 450-500 3-3-3 with under 2.45 ;) That would be unreal.
10-22-2006, 11:42 PM
hicookie

Quote:

Originally Posted by Revv23

i think its time for hicookie to do a massbuy for everyone!! :)

edit - see if you can do 450-500 3-3-3 with under 2.45 ;) That would be unreal.

okay, i will try later, seen to be possible
im runinig 2.35v 1260 55515 for now:D
10-22-2006, 11:43 PM
GrimReaper

Quote:

Originally Posted by Revv23

i think its time for hicookie to do a massbuy for everyone!! :)

edit - see if you can do 450-500 3-3-3 with under 2.45 ;) That would be unreal.

lol massbuy for me :banana:

do they also have 1024 x2 ? :woot:
10-22-2006, 11:48 PM
hicookie

Quote:

Originally Posted by GrimReaper

lol massbuy for me :banana:

do they also have 1024 x2 ? :woot:

1GB stick not for now in retail store, i will ask them:stick:
10-23-2006, 12:13 AM
Bluebeard

any info on used memory ic?

seems to be very cheap compared to micron pricing
10-23-2006, 12:20 AM
GrimReaper

has to be the D9GKX :woot: :slobber:

Its rated for only 1.8V? :eek:
10-23-2006, 12:23 AM
hicookie

Quote:

Originally Posted by Alonso

any info on used memory ic?

seems to be very cheap compared to micron pricing

i bought the perious ver "gmh" for the 6layer pcb before

so i guess , they use same ices, jsut change to 8layer pcb

http://img.oc.com.tw/b60799/20069251...953435943.jpeg
10-23-2006, 12:30 AM
GrimReaper

but the new seem to have a very smooth finish? :confused:
10-23-2006, 12:46 AM
Nephilim

I assume the -25 on the smoothe finished ic's stands for 2.5ns.

D9GMH = 3.0ns
333MHz cas5
MT47H64M8B6-3

D9GKX = 2.5ns
400MHz cas5
MT47H64M8B6-25E

So they're most likely D9GKX instead of D9GMH

EDIT: but the EPD at the start of the part number suggests elpida, which would be consistent with the observation that it is smoothe wheras micron D9 IC's are generally rather rough... wonder which elpida IC it could be!?
10-23-2006, 12:49 AM
hicookie

2.35v DDR2-1260 5.5.5.15 Sp2004 stable
http://pic.xfastest.com/hicookie/ddr...35v_sp2004.jpg
2.35v DDR2-1260 5.5.5.15 Dual Super Pi 32m Pass
http://pic.xfastest.com/hicookie/ddr...i32m_begin.jpg

http://pic.xfastest.com/hicookie/ddr..._pi32m_end.jpg
10-23-2006, 12:56 AM
Quentin

great :slobber:
10-23-2006, 01:56 AM
GrimReaper

:slobber: :slobber: really awesome stuff

that number on the chip EPD264082200 took me to this page
http://global.shuttle.com/Support/Su...5M%20(FD36V1.x

Kingbox 1GB DDR2 PC4300 EPD264082200-5 KI0632
10-23-2006, 02:25 AM
Hazzan

Fantastic you have Ram with low Price:slobber: :slobber: :slobber: :slobber: !! it's to bad only available in Taiwan and Cina
10-23-2006, 02:44 AM
Hazzan

Fantastic you have Ram with low Price:slobber: :slobber: :slobber: :slobber: !! it's to bad only available in Taiwan and Cina
10-23-2006, 03:24 AM
fakhrain

I believe those are Elpida's... the smooth IC surface and the EPD code explains it. Probably some 'grade A' Elpida ICs .... wonder what could they be
10-25-2006, 07:36 AM
bachus_anonym

That's some nice results there, man :up: DDR-1260 5-5-5 @ 2.35v is an eye candy :) I'm gonna take a wild guess and say it's Elpida's 2.5ns DDR2-800 5-5-5 part... I assume they're not making 2x1GB of those, do they?

Do I see it correctly, that these modules have a LED on a PCB that shows its status? Pretty cool :)
10-25-2006, 07:42 AM
hicookie

thanks, 1GB*2 not available for now, but i heard they are on the project
10-25-2006, 08:01 AM
GrimReaper

awww thats really stupid of the company :slapass:
10-25-2006, 08:09 AM
hicookie

ran 8 hours sp2004 priming stable at
DDR2-870 3.3.3.4 2.4v
i will add the heatspreader, wish target 2.5v~2.55v ddr2-900 3334 stable

http://pic.xfastest.com/hicookie/ddr...004_8hours.gif
10-25-2006, 09:23 AM
Ming06

Quote:

Originally Posted by fakhrain

I believe those are Elpida's... the smooth IC surface and the EPD code explains it. Probably some 'grade A' Elpida ICs .... wonder what could they be

I agree with U,
Great Elpida ICs :stick:
10-25-2006, 10:42 AM
andlcs

AFAIK Elpida DDR2 ICs have a border. Those look like Micron D9XXX to me.
10-25-2006, 06:23 PM
STEvil

no boarder on any elpida's (-6E E and -6B E) around here.
10-25-2006, 08:35 PM
kiwi

There are some unknown and good memory manufacturers in Asia :toast:
10-28-2006, 06:10 PM
andlcs

http://www.geocities.com/ohyeah8o/elpida.jpg

Here an Elpida -6E-E with boarder
10-28-2006, 06:43 PM
Noob-ftw

These are amazing. You should buy them and sell them here. =D
10-29-2006, 04:13 AM
The Stilt

hicookie, can you take a side picture from the IC?
11-17-2006, 07:47 PM
hicookie

Quote:

Originally Posted by The Stilt

hicookie, can you take a side picture from the IC?

master, they will change their minds, shows ICes in new batche module.also 1GB stick available in few days:D
11-17-2006, 07:57 PM
hicookie

boarder
http://hicookie.expreview.com/attach...63822169_0.jpg
11-18-2006, 11:21 AM
erwinz

hey hicookie can you mass buy for us xs.. :D tnxs :D
11-19-2006, 03:36 AM
eva2000

curious i just got my P5B Deluxe and AI suite reported vdimm misreports the vdimm set in bios

AI suite = Bios
2.30v = 2.35v
2.35v = 2.40v
2.40v = 2.45v

or did you mod your P5B Deluxe so 2.30v in AI Suite = 2.30 vdimm real ? hence quoting the AI Suite reported vdimm values ? or P5B-E Plus's AI Suite reports the correct vdimm ?
11-19-2006, 06:36 AM
hicookie

Quote:

Originally Posted by eva2000

curious i just got my P5B Deluxe and AI suite reported vdimm misreports the vdimm set in bios

AI suite = Bios
2.30v = 2.35v
2.35v = 2.40v
2.40v = 2.45v

or did you mod your P5B Deluxe so 2.30v in AI Suite = 2.30 vdimm real ? hence quoting the AI Suite reported vdimm values ? or P5B-E Plus's AI Suite reports the correct vdimm ?

don't worry, u can meaure it by ele-meters,
and watching the idle and loaded.there is asus's offset bug:)

i have mod my p5be plus.
11-19-2006, 06:44 AM
hicookie

Quote:

Originally Posted by erwinz

hey hicookie can you mass buy for us xs.. :D tnxs :D

i thnk there is not available for a mass buy at xs.
09-28-2007, 09:49 PM
ncool15

I can do Mass buy for you guys.PM me for more info.
09-28-2007, 10:44 PM
v_parrello

Quote:

Originally Posted by hicookie

.......

ICes (D9GMH)
http://pic.xfastest.com/hicookie/ddr...kingbox_ic.jpg

Are they micron chips? ... epd264082200-25? :confused:

These chips don't look like Micron D9GMH!
10-06-2007, 02:04 AM
caesarean

@DDR1200, Vdimm 2.28V-2.30V (2.275V bios set)..:up:

http://www.pc-cm.com/modules/Forums/..._23.15_933.gif
http://www.pc-cm.com/modules/Forums/..._00.19_600.gif

& DDR1300, Vdimm 2.54V..:D

http://www.pc-cm.com/modules/Forums/..._20.11_145.gif
:up: