Lian Li V2000 High perf "Snap-on" kit

Printable View

10-10-2006, 08:05 AM
Ssilencer

Lian Li V2000 High perf "Snap-on" kit

Well, the idea of this unit was put together phase change and high performance water in the bottom part of the v2000, and also do it in a way you can take in/out the complete kit easily
Our friend Diego asked us for this for long time.
The "KIT" :

Embraco FF12 1/3hp LBP r12 compressor charged with r502
Custom made condenser
@itor evap kit Acrilic ultra model
@itor High performance watercooling 120.2 radiator with 2 Panaflo FBA12G12H1A, controlled by the new G-Froster X3 (meanwhile I will use the new XE2.0, 2 K type thermal probes, etc)
@itor made the Special Intercooler shroud to fit the condenser/radiator and 2 120mm Panaflo

First pics of the kit:

http://img245.imageshack.us/img245/4...pmediumpq0.jpg

http://img245.imageshack.us/img245/6...cmediumfz3.jpg

http://img245.imageshack.us/img245/2...rmediumca8.jpg

We will mount it over a Conroe x6800 and a 7900gtx sli and asus p5wgs pro Chipset too, all waterblocks and the Reservoir made by @itor too
10-10-2006, 08:12 AM
n00b 0f l337

Very nice little all in one-r there.
10-10-2006, 08:15 AM
the_new_guy

sweet build!!!!!

like the idea of been able to put it in and pull it out.

should be nice and power full with the 1/3 hp,

do you have any temps??
10-10-2006, 08:32 AM
johann

Excellent work Ssilencer. You know these days I just love to see people using new ideas and build units thats little different to others.

Not a small unit atall, CPU cooling should be way up there with NL11f units and the watercooling top notch. Not some bs black ice radiator. I believe thats true 3 pass in there.

Enclosure looks great and for some reason the chrome looks good on that one. I had chrome on my last unit but removed it. I didnt like it.

Nice, very nice :D
10-10-2006, 08:34 AM
Ssilencer

Thanks guys, just unloaded(-60c), I need to mount it over the x6800 to tune it.
The most dificult part was to find a way to fit all this on the v2000 bottom part, hours of Solidworks, as @itor likes to say :).
Hehehe, Thanks Johann, I was loking for you to send you the pics first, but I didn't find you...
And yes, TRUE 3 pass radiator with special copper fins design to avoid air restriction.
10-10-2006, 08:50 AM
Messiah Khan

Wow, it looks stunning. Great work.
10-10-2006, 08:53 AM
pazza316

Very nice work Mr S!! Very clean build and great idea!
10-10-2006, 09:03 AM
J0d3r

Nice looking Ssilencer! :clap:
10-10-2006, 10:52 AM
rick_fx

Very nice work :)

What are the dimensions of this "kit"?
10-10-2006, 10:57 AM
Ssilencer

Quote:

Originally Posted by rick_fx

Very nice work :)

What are the dimensions of this "kit"?

It fits perfectly on the bottom compartment of the Lian li V2000 without any mods, I will take measures of the plate if you want.
10-10-2006, 11:05 AM
Mr. Popo

Sexy, uber sexy.
10-10-2006, 11:09 AM
4Qman

Quote:

Originally Posted by Ssilencer

It fits perfectly on the bottom compartment of the Lian li V2000 without any mods, I will take measures of the plate if you want.

That would be great, Id certainly like to know.

It looks awsome by the way :toast:
10-10-2006, 11:49 AM
Brettbeck

Nice build Ssilencer.

Do you have any performance figures?
10-10-2006, 12:05 PM
Jack

No 'ass' pics? ;)
10-10-2006, 12:11 PM
DEVIL K-ce

:banana: Super SS

Nice and congratulation's
10-10-2006, 12:16 PM
Pete

I want it!!!

Case will need a cut out for the suctionline and head to throuhg how ever!

Still i want one!
10-10-2006, 12:25 PM
Ssilencer

Quote:

Originally Posted by Brett

Nice build Ssilencer.

Do you have any performance figures?

Not yet, I need to mount it over the x6800 to tune it with r502, if r502 don't give me what I want, I will change to r402 or whatever needed :D
Still have room for high pressure gases, we have to 103cfm panaflos there and the high side on 502 wasn't more than 160psi unloaded...
10-10-2006, 12:39 PM
Ssilencer

Quote:

Originally Posted by Jack

No 'ass' pics? ;)

No "ass" pics yet Jack :D

But some Snap-on pics to show how good it fits.

http://img245.imageshack.us/img245/6...cmediumta8.jpg

http://img245.imageshack.us/img245/4...rmediumet4.jpg
10-10-2006, 01:03 PM
Rockhammer

That is slick! I want one!
10-10-2006, 01:10 PM
n00b 0f l337

Pretty slick indeed, not that hugely advanced but definetly a good looking unit, and the watercooling radiators a nice addition.
10-10-2006, 01:59 PM
Messiah Khan

Im guessing the size of the condenser means you have to mount the PSU in the front drivebays? Or can you squize it in the bottom still?
10-10-2006, 02:08 PM
Ssilencer

Quote:

Originally Posted by Messiah Khan

Im guessing the size of the condenser means you have to mount the PSU in the front drivebays? Or can you squize it in the bottom still?

http://img245.imageshack.us/img245/9...wmediumja4.jpg

;)
10-10-2006, 02:26 PM
sladesurfer

nice, I want one. That's the best invention since slice of bread:D
10-10-2006, 02:40 PM
sladesurfer

Its also good if you have a regular case. You just mount it on top of the case:D
10-10-2006, 02:47 PM
qdemn7

Quote:

Originally Posted by Ssilencer

;)

SSilencer, that is so sick it's pathetic. :eek: :party:
10-10-2006, 03:10 PM
n00b 0f l337

My only concern is airflow, does the lian li normally have a vent in those area's?
10-10-2006, 03:14 PM
Ssilencer

Quote:

Originally Posted by n00b 0f l337

My only concern is airflow, does the lian li normally have a vent in those area's?

Nope, but this unit will have it :)
10-10-2006, 03:16 PM
n00b 0f l337

Ah if you sell any will you include a template?
10-10-2006, 04:18 PM
Ssilencer

Quote:

Originally Posted by n00b 0f l337

Ah if you sell any will you include a template?

Sure, that's not a problem.
Anyway, the idea was to make this one for a friend, to do it for international sale we have to change materials to make it lighter, well, there is a lot of things that can be done about this kit.
10-10-2006, 04:24 PM
n00b 0f l337

Anyway you do it, a drop in unit is a great idea. Any concerns as far as a lack of air flow by covering the bottom of the case?
10-10-2006, 04:27 PM
Ssilencer

Quote:

Originally Posted by n00b 0f l337

Anyway you do it, a drop in unit is a great idea. Any concerns as far as a lack of air flow by covering the bottom of the case?

For sure, is meant to have cross airflow.
Or you mean covering the base? any other unit make for a v200 cover the base, and I really don't think the base of the lv200 do sh.. about airflow.
10-10-2006, 08:05 PM
kayl

nice work Ssilencer, that is one tight build there hey, i know how much time and work that would have taken to get it like that :toast:
cant wait to see that E6800 bench and what temps ya get dual prime load ;)

http://img245.imageshack.us/img245/4...rmediumet4.jpg[/QUOTE]

i think noob is saying when you put side pannels on case it will be restricted.
ie they can only draw/blow air in from front and back of case unless moded.

like in this pic

http://img117.imageshack.us/img117/9...000bky0.th.jpg
10-10-2006, 09:08 PM
Ssilencer

Thanks Kayl, and I replied telling that this v2000 will be modded, we are not that stupid to do this kind of design without thinking about that...
10-10-2006, 11:44 PM
kayl

i didnt read the last few post properly :slapass:
10-10-2006, 11:56 PM
Ssilencer

Quote:

Originally Posted by kayl

i didnt read the last few post properly :slapass:

Yeap :)
I was about to reply after reading yours on my email, but I saw that you already edited ;)
10-11-2006, 12:26 AM
Gray Mole

I think the 'cartridge' format is great Ssilencer :)

The need for the line to be where it is still means it's limited to V2000 cases, but with just a couple mods it's a pretty fast fit.

Still not sure I see the idea behind the w/c rad as intercooler tho, can you explain?

I'd love to see a w/c BPHE for condensor, mated to even just a single PA120.1 at the back above. Being water I think it woulkd do very well, and could still be a cartridge fit.

Cheers

Gray
10-11-2006, 12:43 AM
Messiah Khan

I like the thinking Gray. Just run a water loop up to the 120mm fan slot a the back. Then you really would only have to do the minimal amount of modding to the case. It would look pretty damn cool as well(Not that it doesn't already anyway):)
10-11-2006, 07:11 AM
Ssilencer

Quote:

Originally Posted by Gray Mole

I think the 'cartridge' format is great Ssilencer :)

The need for the line to be where it is still means it's limited to V2000 cases, but with just a couple mods it's a pretty fast fit.

Still not sure I see the idea behind the w/c rad as intercooler tho, can you explain?

I'd love to see a w/c BPHE for condensor, mated to even just a single PA120.1 at the back above. Being water I think it woulkd do very well, and could still be a cartridge fit.
Cheers

Gray

Intercooler it is just a way to call it, it is not for now, but there are some things I want to test in the next.

Quote:

The need for the line to be where it is still means it's limited to V2000 cases, but with just a couple mods it's a pretty fast fit.

Let me see, the thread name is "Lian LI V2000 HIGH PERF KIT", so yes IT IS LIMITED TO V2000, it is that difficult to understand?:)

We fit a dual 120.2 and we will get better temps on the 3 waterblocks with the fans running at just 50% and also helping to run the condenser with superb air flow at that speed, looks like I don't understand something you are saying. why I need to put a POS 120.1 rad when I can fit a 120.2 high perf rad.?

This is single unit, not a commercial line being made, and we can make it whatever the customer needs. This one wanted the best watercooling parts we can fit inside the v2000 with phase, another one can ask for a pos watercooling and phase,you know. As I didn't see any other v2000 with a 120.2 altogether with a phase in the bottom part to copy, we had to find a way to do it and this was the best way.

BTW, how is your hand?
10-11-2006, 10:23 AM
Gray Mole

Hand is screaming at me, but getting better. Typing with one hand is a pain.

Didn't mean to replace the rad with a smaller one, esp now that I realise it's actually for a water loop. Calling it an intercooler made me think perhaps it could be for additional condensor cooling.

I was just thinking of BPHE condensor again :p: one day I'll do that, and figred a 120.1 would work well with that and still fit the 'cartridge' style you're using.

You seem a little touchy today Ssilencer ;) I can spare you a little of my Prozac if you'd like, they doubled my prescription last time :D

Nice work though. As always your customer will be very happy :toast:

Gray
10-11-2006, 10:59 AM
Ssilencer

Yeap, I told you many times to send me some, you never did it and looks what we got :D
Yes, I was thinking about using a slhx to go before the condenser in the loop, so I can get maybe a pair of degrees better in the water, and also get cool air over the condensor, letting me play high a high pressure gas maybe, but this is a customer machine, and I really don't have time to play this kind of games with my money for now.
10-11-2006, 06:54 PM
Duh

Quote:

Originally Posted by Gray Mole

You seem a little touchy today Ssilencer ;) I can spare you a little of my Prozac if you'd like, they doubled my prescription last time :D
Gray

@SS: have told you before on the other forum I really like your unit.
@Gray: shame on you; you should try Zoloft (sertraline), Fluoxetin sucks :cool:
10-11-2006, 11:35 PM
johann

Quote:

You seem a little touchy today Ssilencer I can spare you a little of my Prozac if you'd like, they doubled my prescription last time

LMAO :D hehehehe
10-14-2006, 07:22 AM
404Power

HOLY SH*T !!! :slobber: :banana:
I've never seen such a impressing and inoovative idea / unit! :woot:
I think there are a lot of people with a Lian Li and a lot of $$$ who would buy a unit like this one! It rly looks perfect to me (expect the already mentioned problem with the airflow! :rolleyes:)
RLY GOOD work SSilencer! :clap:
10-27-2006, 10:38 PM
Ssilencer

Little update, testing and installing the new Xe 2.0

Changing the display for a bigger one (20x2 blue) and fitting the controller and display in the 3 1/2 lian li bay.

http://img208.imageshack.us/img208/8...3large2js9.jpg

http://img208.imageshack.us/img208/4...50largekb3.jpg

3 temps on display, Ambient (T0) thermocouple 1 (T1 on evap) thermocouple 2 (T2 inside de case)

http://img208.imageshack.us/img208/6...3mediumft0.jpg
10-28-2006, 12:22 AM
Ssilencer

Some testing:

Dual spi 32 conroe x6800@1.6V, 4420mhz, evap temp -39 with 32c ambient

http://img208.imageshack.us/img208/1...442532mdj1.jpg

Next day (colder day)
Orthos over Conroe x6800@4326mhz 1.6v ambient temp 21c

http://img208.imageshack.us/img208/2175/xe201iu0.jpg

http://img208.imageshack.us/img208/7352/xe203kc1.jpg

http://img208.imageshack.us/img208/9160/xe204sw3.jpg

http://img208.imageshack.us/img208/4927/xe205nn8.jpg

Plain r502
No rifle, no pistol, plain little 17cm wide x 13cm tall, one row custom condenser, no desuperheater, just cap tube inside suction from 20cm away the compresor to the evap ( original @itor design off course),

Sorry to bother.
10-28-2006, 12:52 AM
Ssilencer

Just to share:

http://img208.imageshack.us/img208/3...245008mqq1.jpg

http://img208.imageshack.us/img208/8...2194572yz6.jpg

All @1.6v iirc.
10-28-2006, 02:27 AM
Raja@ASUS

absolutley fantastic! A great concept of design and implementation, there's definatley a market for a build like that, well done great results too!

regards
Raja
10-28-2006, 06:13 AM
Ssilencer

Thanks, we are still working on that computer, next week I will have some final pics also.
10-28-2006, 07:47 AM
kayl

Nice die temps there sscilencer:toast:
but those spi times arnt look very good for the oc.
also for orthos you need to allocate ram to get rid of that paging error.
10-28-2006, 08:20 AM
Raja@ASUS

I think he just caught a screenshot whilst it was paging for a second or so, this happens once every few minutes approx. Orthos auto allocates the ram, unlike prime 95 where you had to set it through the custom option. If you have 2 gb Orthos will use 1790mb by defalut which I think is fine.
10-28-2006, 08:32 AM
Ssilencer

Quote:

Originally Posted by kayl

Nice die temps there sscilencer:toast:
but those spi times arnt look very good for the oc.
also for orthos you need to allocate ram to get rid of that paging error.

As you can see, I'm a looser overclocking the Conroe :P

want to know something funny? I didn't know how to run a dual spi, took me a day :(
Also, this proc is really weird, runs great at 1.55 or 1.6, but looks like hates high volts, temps dif on 1.7 is about 1c, so I know that is not temps propblem, but this one runs spi 1m at 4575, but if you put 4576 spi just reset the computer, no error in spi, no nothing, plain reset, at any multiplier, so I think we have a problem setting the motherboards maybe, also, I can't get any program to read nothing in negative temps.
10-28-2006, 08:34 AM
Ssilencer

Quote:

Originally Posted by raju

I think he jsut caught a screenshot whilst it was paging for a second or so, this happens once every few minutes approx. Orthos auto allocates the ram, unlike prime 95 where you had to set it through the custom option. If you have 2 gb Orthos will use 1790mb by defalut which I think is fine.

I really don't know, and yes, orthos showed that "paging" once every few minutes.
10-28-2006, 08:40 AM
Raja@ASUS

yeah I checked it myself, even if you change the allocation of ram manually the paging still happens every few minutes, so there's nothing wrong with the screenshot at all.

regards
Raja

edit ps: can you email me the new froster firmware?? I'm using a 1.6 xe..
10-28-2006, 09:12 AM
Ssilencer

Quote:

Originally Posted by raju

yeah I checked it myself, even if you change the allocation of ram manually the paging still happens every few minutes, so there's nothing wrong with thte screenshot at all.

regards
Raja

edit ps: can you email me the new froster firmware?? I'm using a 1.6 xe..

No problem

BTW, the watercooling reservoir being made by @itor:

http://img208.imageshack.us/img208/5...7large2vz1.jpg
10-28-2006, 09:14 AM
n00b 0f l337

Looks very similar to a design someone else was working out in the W/Cing section.
10-28-2006, 09:20 AM
Raja@ASUS

very nice indeed, will be nice to see how it looks when finished, maybe some nice leds to light up the water too...

regards
raja
10-28-2006, 09:27 AM
Ssilencer

Quote:

Originally Posted by n00b 0f l337

Looks very similar to a design someone else was working out in the W/Cing section.

Well, @itor didn't check xs :)

He is making reservoirs like that for long time ago, the second fitting on this one is perpendicular from the one you see.

Raju, yes, I got some weird high power 2 Watts blue led to light the case, and some normal extra bright ones for the enclosure and maybe the reservoir.

This is the weird one :D :

http://www.microelectronicash.com/LEDPOT5.gif
http://www.microelectronicash.com/LEDPOT4.gif
10-28-2006, 09:42 AM
Raja@ASUS

awesome, you gotta post some pics when that things fired up in the case, Imay be interested in one, especially with some red led's shining thru the water...

regards
Raja
10-28-2006, 10:04 AM
Ssilencer

yes, that led has 20 lumen power..

There is another weird led, that has 4 microleds (20lumen x4 maybe) that you can make them bright individually, but the power requirement is 5 watts,I tested it with 13v and it was not enought for the 4 microleds together.

http://www.microelectronicash.com/LEDPOT.gif http://www.microelectronicash.com/LEDPOT1.gif
http://www.microelectronicash.com/HOJA53.html
10-29-2006, 08:03 AM
Ssilencer

A pair of videos (yes, i'm bored)

Instalation

yadda yada

Black t shirt me
Old guy in front of the monitor, @itor,
Cameraman, the owner, diego
10-29-2006, 09:57 AM
Pete

Didn't really understand the video but cool non the less!

So these unit going to be a poduction item Ssilencer or not?
10-29-2006, 10:31 AM
Ssilencer

Pete, we can sell everything, the problem always is the shipping cost.
maybe just sending all but the compresor, or parts
10-29-2006, 01:34 PM
Pete

Quote:

Originally Posted by Ssilencer

Pete, we can sell everything, the problem always is the shipping cost.
maybe just sending all but the compresor, or parts

Just had to check on Google where you were...LMAO. My world tour pending (just smashed my ankle up) is gonna in town! I have no idea why exactly but were doing a demo there! No comps!

May have to get list off you via a pm of what you do and can ship to the uk dude!
10-29-2006, 06:23 PM
Ssilencer

Let me know do you want
World tour?
10-29-2006, 09:27 PM
wdrzal

I'd rather have copper tubes and aluminum fins. hard to connect or repair aluminum tubes :(

Or copper tubes and copper fins is the best ;)
10-29-2006, 09:50 PM
Ssilencer

Quote:

Originally Posted by wdrzal

I'd rather have copper tubes and aluminum fins. hard to connect or repair aluminum tubes :(

Or copper tubes and copper fins is the best ;)

huh??
What are you talking about Walt? I'm lost or you missed the thread.
10-30-2006, 12:22 AM
Pete

Quote:

Originally Posted by Ssilencer

Let me know do you want
World tour?

I need to know what you do and can do 1stly! Can you pm me with this info please?
10-30-2006, 12:25 AM
Revv23

wow really clever design.
10-30-2006, 03:51 AM
wdrzal

Quote:

Originally Posted by Ssilencer

huh??
What are you talking about Walt? I'm lost or you missed the thread.

The one picture looked like the condensor had aliminium tube and copper fins,

If I was wrong I apologize for the mistake :slap:
10-30-2006, 04:12 AM
johann

Quote:

Originally Posted by wdrzal

The one picture looked like the condensor had aliminium tube and copper fins,

If I was wrong I apologize for the mistake :slap:

That is the watercooling radiator, the condensor sits on the other side ;)
10-30-2006, 06:27 AM
Ssilencer

Quote:

Originally Posted by wdrzal

The one picture looked like the condensor had aliminium tube and copper fins,

If I was wrong I apologize for the mistake :slap:

Sorry, I didn't understood what you was talking about.
As Johann said, one side is the watercooling radiator, 2 120mm fans in the middle, and condensor on the other side.
And is not alu fins, radiator is all copper, condensor is copper tube alu fins.
10-30-2006, 11:14 AM
wdrzal

Quote:

Originally Posted by johann

That is the watercooling radiator, the condensor sits on the other side ;)

Then it should be in the chilled liquid sub-heading,you tricked me:stick:

Guess it is Halloween:D
10-30-2006, 12:07 PM
Ssilencer

Quote:

Originally Posted by wdrzal

Then it should be in the chilled liquid sub-heading,you tricked me:stick:

Guess it is Halloween:D

No, it is a Kit that contains a phase change direct die unit and a high performance watercooling radiator, not a chiller.:)
11-05-2006, 01:51 PM
Ssilencer

Just a pair of pics we took with a cel phone (bad quality) I will update once we get the water uv blue reactive stuff.

http://img174.imageshack.us/img174/5...4mediumcj8.jpg

http://img174.imageshack.us/img174/8...6mediumoh7.jpg
11-05-2006, 02:17 PM
LittleDevil

It looks really nice ;)

regards
11-05-2006, 08:24 PM
damnnit

Very nice fit. thats for sure.
11-22-2006, 08:52 PM
Ssilencer

Looks like people keeps missing the real detail, almost no delta between ilde and load, with just r502.
And yes, it is a very nice fit and design, the best for sure.
07-26-2007, 09:13 AM
Ssilencer

This are the modified side panels for this unit:

http://img373.imageshack.us/img373/3...amediumuc6.jpg

http://img373.imageshack.us/img373/6...amediumld0.jpg

More picks later once mounted
07-26-2007, 09:36 AM
Fhqwhgads6680

wow Ssilencer, those look great! and will help keep the unit cool aswell! nicely done! you work is always very clean.
07-27-2007, 04:20 AM
Ssilencer

Quote:

Originally Posted by Fhqwhgads6680

wow Ssilencer, those look great! and will help keep the unit cool aswell! nicely done! you work is always very clean.

Thanks man, we always try to do new and original things to avoid getting bored :)
08-01-2007, 11:04 PM
Shalamay

I wish I could figure out how to crap money, it would be an endless supply and I could get all these nice units. Looks great.
08-01-2007, 11:52 PM
Cupcake

That looks awesome

All times are GMT -8. The time now is 07:57 PM.

XtremeSystems