I am still running, more stuff is coming incl orb link.
http://www.kinc.se/90.jpg
Printable View
I am still running, more stuff is coming incl orb link.
http://www.kinc.se/90.jpg
simply amazing :slobber: kom igen kinc, mer mer ! :) (keep it coming, more!)Quote:
Originally Posted by Kinc
At this rate, I guess 100k is just around the corner :p:
Congrats :toast:
is this with two 1950 cards?
+100Mhz on cpu I see.. ;)
damn, thats almost 91!
Grats on that great milestone Kinc!!!!!!!!!
Amazing work ....congrats on the 90k :toast:
PowerColor X1950 Crossfire @ 882/1143MHz :)
So you finally managed to successfully run a pair of them in cf :D
Great score! Congrats to this milestone :toast:
nice dude :D
Great work :D.
Is that with LN2 on the CPU and master, cascade on slave? Or LN2 on both cards?
congratulations bro
nice run
congrats KINC! !!! !
you are the king of 3dmark 2001 :D
i guess you are giong to be the first over 100K ;)
Awesome man. Dominate the ORB man!! :D
awesome performance planning for pushing more ?
________
Mercedes-Benz R170
Holy Sh*t!:slobber:
Amazing work Kinc:woot: :clap:
Great Stuff kinc :toast:
I figured I would try 3dmark 05 but the driver still wont alow for good results when running subzero (all becuase of that damn windows boot shut of bug), gt2 and 3 are getting far behind. Hopefully 6.10 will solve alot of problems. Im out of LN2 so this is it for now :)
The compare link: http://service.futuremark.com/compare?2k1=9061058
Oh I almost forgot. This is how good the cpu is: http://service.futuremark.com/compare?2k1=9061068 :)
The gfx perf here is really bad, only the master card running 500/600 with no CF so it would be like 390 fps with cf.
5233MHz stable in 01 @ -130C/1.78V
5204MHz stable in 05 @ -130C/1.78V
PoooWNED :slobber: , great job Kinic , keep pusshing man !:woot:
Holy testicle tuesday !
Thats nice Kinc, keep beating the crap out of that rig, you know, even though you have made an awsome result there we still want more from you =)
Keep it coming
this just crazy :D
great score man! nice cpu you got there :)
congrates!:toast: a new milestone
:woot: :toast:
another milestone left in the dust
did you use ATT (ATiTool) ?Quote:
882/1143MHz
Nice job again kinc or both of you :toast: . The 05 should be smokin at those clocks.
Just speechless:shrug:
wtg kinc. Nice work :)
Congratz on the millestone :)
Incredible cpu clocks for 3D. Fantastic CH :)
awsome mate :)
wow game3--1272.4fps :slobber:
Just amazing :)
Congrats :up:
Perkam
Wonderfull mark!
Looks like when we have some good oc tools (specially to gddr4) 100k will be so easy.
How about drivers?
Everything ok?
Congrats and keep going!
Please post full system specs (need for my site) :D
:toast:
congrats kinc :D
congrats kinc awesome work
now the biggest milestone of all is waiting 100k
Considering not a smooth run at all the persistence really paid off :toast: .
Consdidering the effort for 90k I doubt 100k will go down before mid Novemeber when the G80 strolls into town wearing black levi's and smoking a cheroot.
Regards
Andy
:D :clap:
Good job
holy :banana::banana::banana::banana:!!!!
what is that proram overclocker where u can adjust voltage for GPU?? any links??
Great result indeed :toast:
Awesome job :toast:
PS: i see KP has a new avatar :D
Congrats:toast:
Simply amazing, only a matter of time before 100k falls.
http://www.fishing.kiev.ua/trep/congrats.gif
Another milestone down...next step, magic 100k :D
Nice run Kinc :)
Great job!!!
Superb job, Kinc!!! Congratz, you got any pics of the 90K rig?
You can find more info here: http://www.nordichardware.com/news,4747.htmlQuote:
Originally Posted by TaPaKaH
simply amazing :slobber:
congratz on the milestone :toast:
Next stop 95k and then we are finally ready to see 100k fallin' :slobber: :slobber: :slobber:
100k... wow that has me thinking.
Probably with G80.
you think to much :DQuote:
Originally Posted by charlie
Wonderful Nature
Thanks you all!
Yeah it should, but there is alot of bugs with X1950 and late catalysts, that holds back the performence :( But I've just bought back my -100C X1900 master card for some 05 action :DQuote:
Originally Posted by k|ngp|n
90K wall smashed finally! :eek: :woot:
Great score Kinc, congratulations :toast:
Insane score Kinc !
congrats
finally you got it!!! :toast:
congrats man!
awesome score!
Marco
Awesome, how many FPS in CSS? :D
Dat is a super kool run there, as usual.. all I do over here is show "Respect" to all those who have da edge.
any 03/05/06 runs ?
I'm working on solwing the problem wehere Catalyst thinks the cards works at the max temp when is is actuall below 0C. This problem is not showing in Catalyst 6.3 and I think I first noticied it in Catalyst 6.7 or even 6.6, not sure. This problem needs to be solved for the performence to get back in 05 and 06. As it is now X1900 would be better then X1950 in 05.Quote:
Originally Posted by TaPaKaH
congrats Kinc...you deserve it. :toast:
all the time impressive results....congrats kinc ;)
grats kinc, would you say the score is held back by the cpu or gpu's?
What i mean is, whats the biggest bottleneck in your opinion, do we need faster videocards or faster cpu's for 100k?
Cpu, the only test not limited by cpu is nature. For 100k tough we will need more fps in nature as well since i doubt we will see c2d 3d stable over 5300 in the near future. Nv nature + ati system would be nice :-)Quote:
Originally Posted by Revv23
Grats again on the 90K a huge milestone for sure. :toast:
I was actualy amazed when i saw how not so good 1950 in 05 is, so that would be drivers issue?Quote:
Originally Posted by Kinc
Part driver and part hardware, x1900 is better in 05. Im going to run x1900 in 05 soon to see if it fixes the problem.Quote:
Originally Posted by zbogorgon
the best score in 05 i got with 1900xt 256mb :banana: , and I had 1900xtx and 1950xtx, you should try too :D
Very nice overclocking Kinc - congrats to your hard work :toast:
I just bought back my X1900 master that can handle -100+. Pared with my -100+ X1900XTX I hope to see great scores in 05.Quote:
Originally Posted by zbogorgon
Good luck my Friend!!
Lets se a killer score soon!!:slobber:
Kinc = da man!Quote:
Originally Posted by charlie
Charlie, G80 or even G90 wont do much for 3D01 (if anything). Afterall, reason why C2D got so much higher than P4/Athlon64 is because 3D01 is so CPU limited.
However, as you well know, G80 and company will do great things in 3DMark05 and especially 3DMark06.
Kinc, any chance you can run a Quake3 timedemo (demo001)? I'm curious if Quake3 scales to 5 digits!! ;)
X1900 Crossfire fully vmodded rigged and ready to go. Mousepots all over.
http://www.kinc.se/mall.jpg
oo, that looks really nice, go get those WRs now! :)
That rig should pull off a hardcore set of numbers, good luck kinc.
Haha! Nice work on that NB cooler!!!Quote:
Originally Posted by Kinc
I almost forgot, good luck!
Just ran the rigg and it is looking reall good. Figured I woud max out the cores on the 1900s with vmods and the results is jaw dropping. With 1.7V vcore/vddci and -100C 927/927MHz works great. With the cpu @ 4GHz that equaled 152fps in gt3 of 3dmark 05. I'm noticing serveral periods of the test that are cpu/mem limited so hopefully we will see up to 156fps in the end.
The problem running the cards so cold with these pots is that the cold is transfered very easaly to the pcb. The second internal probe of the card in atitool shiwed a temp of -33C wich is by far the lowest temp Ive seen there.
I had to shut the rig down before I could cool down the cpu bacuse the pwm area of the cards was deepfrozen.
Better insulation tomorrow :D
I know what you mean ;)Quote:
Originally Posted by Kinc
Any photos of that Marcus ??
That is what we can call AXS = Absout Xtreme Frozen from a XS Legend:D
Can't wait for the results with your talent and this setup real big number coming - good luck :toast:
Kinc, I dont know anythink really about LN2 cooling, but does such a high temperature gradient between very cold GPU area, and relatively hot power transistors and voltage regulators cause any problems? Thermal expansion problems? What about the temperature varying Ron resistance of power transistors and min of like -20C for capacitors? 927Mhz just seems like magic with so many things that could go wrong.. I guess its just your decades of experience :)
I'm sorry I didnt have any good lighting and the flash on my camera is just a joke. Hopefully the cards aint dameged. It didnt look to good when I shut down.Quote:
Originally Posted by Pedro Rocha
I really hope! card is alive!! those cold bug free X1900 are treasures really hard to find ..Quote:
Originally Posted by Kinc
Congratulations, break 90k milestone!
90k already broken ;) He is going for 100k :DQuote:
Originally Posted by over@locker886
he did it yet :DQuote:
Originally Posted by over@locker886
sorry, I was wrong. Yes,broke.;)Quote:
Originally Posted by ocfx
thermal expansion is not a problem, but frozen capacitors are. they are filled with liquid and once they freeze they wont work, so then you have to let everything thaw. hopefully an experienced bencher wouldn't let it go that far.Quote:
Originally Posted by ***Deimos***
yes and sorry...its not "yet" :p:Quote:
Originally Posted by over@locker886
let me guess.. lots of insulation, and thermal blanket to keep the thermal sensitive components warm?Quote:
Originally Posted by Revv23
Quote:
Originally Posted by ***Deimos***
I guess that could be a side effect of insulation. But thats not why you insulate. Insulation is obviously to stop condensation. I'm no expert but a typical LN2 bench seesion is not going to last long enough to freeze any caps. Which is why i say that an experienced bencher would probably pull the plug before it got that far.
Like master kinc, he saw his x1900's getting too cold and he shut the rig down.
good work ^_^ so high how about 03?