Thermalright HR-03 - x1k Owners Rejoice!

Printable View

10-01-2006, 09:50 PM
Sneaky

Thermalright HR-03 - x1k Owners Rejoice!

found this while browsing at sidewinder computers today:

http://www.sidewindercomputers.com/thhr.html

Quote:

Thermalright HR-03

http://us.st11.yimg.com/us.st.yimg.c...s_1918_5754132

Product Description & Info

Definitely a world first and a first for Thermalright, the HR-03 VGA cooler can be run passively or accommodate a 92 mm fan. The HR-03 can be mounted in two ways also, which is a key factor for SLI users. The compatibilities of this VGA cooler have been enhanced to support all the latest cards as well. See the HR-03 for yourself below, we installed it on a BFG 7900 GT-OC, paired with one of our Akasa 92mm Amber series fans.

* Designed to work fan-less or with a 92mm fan at low RPM for low-noise operation and higher performance
* Proprietary through holes on fins for efficient ventilation and proficient cooling
* 4 innovative designed heat pipes (2 U-shaped and 2 N-shaped heat pipes) for thorough heat distribution across multiple fins
* Two ways of mounting the cooler on video card for best space and configuration management
* Light weight and easy no-tool installation
* Vast compatibility with system cases (ATX & BTX)
* SLI/Crossfire friendly for those serious gaming enthusiasts
* Cosmetically contoured design for that vanity look

http://lib.store.yahoo.net/lib/sidew...ters/hr032.jpg
http://lib.store.yahoo.net/lib/sidew...ters/hr031.jpg

Technical Specifications

Dimension

L133 x W156 x H38 mm (heatsink only)

Weight:

350g (heatsink only)

Compatibilities

ATI:
X1300TD, X1600TD, X1600XT, X1800XL, X1800XT, X1900XT, X1900XTX,X1950,X1900GT

NVIDIA:
6800, 6800TD, 6800XT ,6800GT ,7800GT,7800GTX ,7600GS ,7600GT ,7900GT ,7900GTX ,7900GS,7950GT

HR-03 $46.95

Judging by the 4-heapipe design and 92mm fan compatibility - this looks to be the first TRUE, GOOD air cooling solution (other than the noisy azz stock HSF) for owners of ATI X1800 and X1900 series cards :)

If I didn't have water cooling, I'd be jumping on this right now!
10-01-2006, 10:45 PM
iSlash

Won't fit under my TT BT... and thans a pity=(
10-02-2006, 12:28 AM
Nanometer

Damn... That would work with 7950gx2, but just the top card.
10-02-2006, 12:35 AM
Vapor

I don't think this would work on the majority of ASUS LGA775 boards....why did they put the fins on the other side? Is this really that capable of being a passive cooler? Cause if it needs a fan for a lot of the cards, then putting it on the non-PWM, non-RAM side isn't good, and putting a fan on the fins makes it take up a lot of space many boards don't provide above the graphics slot.
10-02-2006, 02:16 AM
vudoodoodoo

Quote:

Originally Posted by Nanometer

Damn... That would work with 7950gx2, but just the top card.

You can probably flip one of the coolers over to make it work for the bottom card.
I wonder how tall that base is... Hmmm..
10-02-2006, 04:17 AM
Sneaky

as it said on the page - you can flip the entire thing over and use it with the fins pointing down away from the CPU heatsink - i'll bust out ms paint if anyone needs a better explanation
10-02-2006, 05:02 AM
Vapor

Oh I see it now, thanks :) :p: :hitself:
10-02-2006, 02:42 PM
GrimReaper

WOW :slobber: but 46$ for just a gpu cooler? :eek:
10-02-2006, 02:53 PM
WeStSiDePLaYa

wow, deffiently looks like a real contender.
10-02-2006, 03:43 PM
Praxis1452

Bend the Heatpipes so it's parallel to your case wall and right in front of your Side Exhaust... No need for an extra fan or do it anyway if you don't have a side exhaust so that you don't have to take up another slot.
10-02-2006, 04:19 PM
Sparky

Wow this looks like it just might be the ticket for me. I want water cooling but I can't really afford it. This isn't exactly cheap but it is definitely several times cheaper than watercooling :p:

Hmmm sidewinder is OOS but heatsink factory has it for $49.99. More expensive though.

Now we need some reviews :D
10-02-2006, 05:34 PM
CPLB

It looks like they got the mounting right this time... V1 was a bit difficult I think. I'll probably pick one up, it will be interesting to see which way of mounting produces better temperatures.
10-02-2006, 06:28 PM
erwinz

nice cooler.. and nice price.. :D
10-03-2006, 07:54 AM
Tacops

http://www.nokytech.net/thermalright_hr-03-5335-a.html
10-03-2006, 10:08 AM
Miwo

Looks really nice, maybe I will pick one up for my x1900xtx. Have a 92mm Tri-Blade Delta lying around. Ill probably have to bend the heatpipes to get it to fit in my Silverstone LC-20 though.

Wish sidewinder had them in stock, 6.50 for ground from California kinda sucks whereas Sidewinder ships priority
10-03-2006, 01:22 PM
Istasi

If I didn't already have an Accelero which I was satisfied with and didn't plan on upgrading to DX10 in a few months, I'd be all over this.
10-04-2006, 05:35 AM
Kunaak

seems like a really good heatsink.

heres a different view of it installed, so people can see this can be installed in a few different ways, and how small it reall is. :D

http://forums.silentpcreview.com/vie...203038b49567b6

http://i44.photobucket.com/albums/f9...0000040366.jpg
10-04-2006, 05:30 PM
quicksilverXP

Still like the Sytrin cooler at 30 bucks. They are coming out with a newer fan bracket so you can run a couple of the Sytrin coolers in SLI or Crossfire.
10-04-2006, 07:46 PM
Vapor

That memory heatsink is interesting.....stealing the thunder of the HR-03 IMO

The more pictures I see, the less impressed I am by the HR-03.
10-04-2006, 08:03 PM
Darkenreaper57

Wow, I like the design a lot. I haven't seen a wrap-around GPU cooler like that before. It looks like it preserves most the the PCI/PCI-E slots as well. The only worry I would have is that it might run into the CPU cooler or another heatsink/module on the motherboard.

I wonder how well a wrap-around waterblock would perform using heatpipes. Probably not as well (I would think) but it would be interesting to see.
10-04-2006, 11:45 PM
Cooper

http://www.thermalright.com/a_newima...03-New-pic.jpg
10-05-2006, 11:03 AM
deeznuts

Since this can be mounted upside down so to speak, can it be mounted sideways, i.e. in a desktop case?
10-05-2006, 11:16 AM
Kunaak

the only thing I dont like about this is...

take a close look at how little distance there is between the ram chips, and the heatpipes, in the pic I posted.
theres virtually no distance there for ramchips.

now the X1950's come with a 2 part heatsink.
theres 1 long ram chip, and then theres the core heatsink.
removing the core heatsink, your left with the 1 long ramchip heatsink.

I'd really like to continue using that ram chip heatsink, cause I really reallllllllly like the idea, of being able to have a heatsink on my ram chips, without permanantly adhering something to them.
however, using this VGA cooler on the core, would leave virtually no room to use that ram chip heatsink at the same time, unless you plain old grinded that area away, to make room for the heatpipes to pass over it, and still use that ram chip heatsink.

the problem then becomes a simple one for me...
I like to sell things, in nearly the same condition I got it in, so it's easier to sell.
it's always harder to sell a videocard, if the ramsinks are permemant on the chips, cause then the next person has to also need that kinda cooling, and most of the time, thats fine for a person watercooling, but not for a person interested in air cooling, which most people are...
so it becomes harder to sell something, the more I have to mod it.

I really wish they would have made that thing just a quarter of a inch taller, then it would have been perfect...
10-05-2006, 11:40 AM
Miwo

Quote:

Originally Posted by deeznuts

Since this can be mounted upside down so to speak, can it be mounted sideways, i.e. in a desktop case?

I ordered one yesterday from Sidewindercomputers. I am using a Silverstone LC-20 desktop case, so I'll let you know.... lol. I am probably going to mount it so that the main portion is around where my other PCI-E slot is. I have about one inch clearance on top of the bracket, so hopefully that is enough room for the U shaped heatpipes, otherwise ill prolly bend it.
10-05-2006, 11:44 AM
deeznuts

Thanks bro, that sounds great! One thing you can do is sit the computer (if possible, don't break anything!) on it's side and run it like a regular tower just for a few minutes, to compare to it being on its side.

Nice case btw., I have the LC-17B
http://www.silverstonetek.com/products-lc17.htm
10-05-2006, 12:34 PM
Aramdin

Quote:

Originally Posted by Praxis1452

Bend the Heatpipes so it's parallel to your case wall and right in front of your Side Exhaust... No need for an extra fan or do it anyway if you don't have a side exhaust so that you don't have to take up another slot.

Look at this cooler > Aerocase Condor Passive High End VGA Cooler Review

Its exactly as you say :)

Anyway,

I like this cooler, wonder if it will be better than the Sytrin.
10-06-2006, 03:44 PM
biohead

its time to cut another intake hole in my sidepanel, joy :D
10-10-2006, 11:37 PM
Kle1ntje

First Review:slap:

http://www.ocxtreme.org/joomla/index...d=35&Itemid=30

Note: Page 5 isn't online, the most importent page (temps):D
10-11-2006, 12:31 AM
biohead

huh the thermalright pics tell us to apply thermalpaste on both core AND base? that's just too much paste =/ :stick:

anyways those pics with the x1950 look darn sweet, but damnit upload the temps already :(
10-11-2006, 09:11 AM
Kle1ntje

Quote:

Originally Posted by biohead

huh the thermalright pics tell us to apply thermalpaste on both core AND base? that's just too much paste =/ :stick:

anyways those pics with the x1950 look darn sweet, but damnit upload the temps already :(

Here are some temps posted on ocforums:

Arctic Cooling X2 on 2 Sapphire X1900XT 512mb in crossfire mode:
TIM: Arctic Silver Ceramique
idle: 56C
load (2h of Oblivion): 78C

Thermalright HR03 (passive without fans blowing on it)
TIM: Arctic Silver AS5
idle: 45C
load (2h of Oblivion): 67C

Thermalright HR03 (with 2 S-Flex 120mm fans blowing from side of case)
TIM: Arctic Silver AS5
idle: 38C
load (2h of Oblivion): 58C

:toast:
10-11-2006, 09:22 AM
CPLB

Quote:

Originally Posted by Kle1ntje

Here are some temps posted on ocforums:

Arctic Cooling X2 on 2 Sapphire X1900XT 512mb in crossfire mode:
TIM: Arctic Silver Ceramique
idle: 56C
load (2h of Oblivion): 78C

Thermalright HR03 (passive without fans blowing on it)
TIM: Arctic Silver AS5
idle: 45C
load (2h of Oblivion): 67C

Thermalright HR03 (with 2 S-Flex 120mm fans blowing from side of case)
TIM: Arctic Silver AS5
idle: 38C
load (2h of Oblivion): 58C

:toast:

Wow, very nice results. What was the ambient temperature of the testing environment? Thanks for sharing :)
10-11-2006, 09:23 AM
iSlash

Kle1ntje
Dam it! That's MASSIVE!!! I bet the new 8800GTX will need a cooler like this for OC and/or silent work 8-)
10-11-2006, 09:34 AM
biohead

wow active cooling will do serious damage in a good way :D
10-11-2006, 10:00 AM
Jodiuh

Grrr...there temp page's still offline. WTF? Anyway, this looks like a great solution, but it'll be around $60 bucks w/ a good fan.
10-11-2006, 11:08 AM
lawrywild

wow.. need one of these.. :D
10-11-2006, 03:24 PM
Cooper

This thing costs only €45. Same shop has Zalman VF900Cu for €30.
Not bad at all considering it`s performance and certainly is alot cheaper than going water-cooling
10-11-2006, 06:01 PM
dqniel

Too bad it won't fit my x800gt-slow.
10-12-2006, 11:07 AM
biohead

Quote:

Originally Posted by OCXtreme

**Update (10/11/2006):

We understand this review is very important to every customers who have been waiting very long time. Please be patient. Ocxtreme will do as details as we can. Here is the chart that showing the temperature difference between we test and observed from the whole set of Future Mark 3D mark. Again, please stay tune, and wait for our results.

http://www.ocxtreme.org/joomla/image...ps/hr03xls.jpg
10-12-2006, 09:52 PM
Jodiuh

Any idea what fan they used? Or for that matter, the card...if the stock fan's on 100%, I'd say x19.
10-12-2006, 10:05 PM
CPLB

Quote:

Originally Posted by Jodiuh

Any idea what fan they used? Or for that matter, the card...if the stock fan's on 100%, I'd say x19.

I'm pretty sure OPB did the test with an X1950XTX. I want to know the fan speed he set the stock cooler to though. If it's at 100% then the HR-03 did pretty well, but if it's on auto then... :( HR-03
10-13-2006, 03:45 AM
Onepagebook

Certainly 100% set in the Ati fan setting section for fixed rate.
...the complete review has been posted.:toast:
10-13-2006, 06:34 AM
JasonDTM

Quote:

Originally Posted by Jodiuh

Any idea what fan they used? Or for that matter, the card...if the stock fan's on 100%, I'd say x19.

The card used was an ATi X1950XTX, and the fan used on the HR-03 was a Panaflo 80mm, dont know which but it's a panaflo. :)
10-13-2006, 06:50 AM
CPLB

Quote:

Originally Posted by Onepagebook

Certainly 100% set in the Ati fan setting section for fixed rate.
...the complete review has been posted.:toast:

Thanks for clearing that up. Good review, I liked all the pictures and captions. One question though, does installing it with the heatsink up (like the Thermalright V1) give better temps than the way you had it installed?
10-13-2006, 06:54 AM
JasonDTM

Performance is probably the same, the base of the side you're switching to has the possibly of scratching and marring due to the retention bracket of the other installation method.
10-13-2006, 07:26 AM
Vapor

Panaflo 80mms aren't too powerful, even the H1....things are looking good for this bad-boy :)

EDIT: just looked at the review and that looked like a 92mm H1. ~57CFM and about the same noise as the X1950XTX stock cooler at ~75%

But the installation option of an angled 120mm fan is SWEET, just need to make sure the bottom flange is completely exposed (no Yate Loons :() to pull it off.
10-13-2006, 10:24 AM
Jodiuh

I plan on putting the 120MM SFLEX E (49CFM, 22DB) on there. Should be good times.
10-13-2006, 03:35 PM
Sneaky

just got my HR-03 today and mounted a Arctic Cooling 92x25mm fan on there - HOLY CRAP! full load tops out at 48ºC, and it idles at around 35ºC - that UNHEARD OF for a x1900XTX with air cooling... much less silent air cooling at that

thermalright definitely hit the nail on the head with this! :woot:

but somewhat OT bad news... the HR-05 NB cooler I ordered won't fit on my P5WDG2-WS Pro because the Ultra-120 is blocking it :(, but I guess my old trusty NB-1C will have to suffice (although it does the job just fine)
10-13-2006, 05:47 PM
angel

Quote:

Originally Posted by Sneaky

just got my HR-03 today and mounted a Arctic Cooling 92x25mm fan on there - HOLY CRAP! full load tops out at 48ºC, and it idles at around 35ºC - that UNHEARD OF for a x1900XTX with air cooling... much less silent air cooling at that

thermalright definitely hit the nail on the head with this! :woot:

but somewhat OT bad news... the HR-05 NB cooler I ordered won't fit on my P5WDG2-WS Pro because the Ultra-120 is blocking it :(, but I guess my old trusty NB-1C will have to suffice (although it does the job just fine)

What where your temps before you got the new cooler? How did you actually test the HR-03? Did you use 3Dmark06 loop or smt like that to really heat up the X1900 XTX ?

I'm currently looking for a good air cooler for my hot X1900 XT. With stock cooler I'm getting about 80-90C easy @ full load+ the fan is really annoying . And I'm looking forward to OC that thing but its quite hard with those temps :stick: So would this HR-03 cool off my card even when using some extra volts and OC (not planing to go for high volts) ?
10-13-2006, 06:01 PM
Sneaky

the HR-03 is the heatsink for you then - its the only thing out that can actually handle the heat of an x1900 series card and give you GOOD temps

before i was touching 80ºC full load with the stock cooler w/ fan on auto, or around high 60's load with the stock hsf and fan at 100% which is so damned loud

then HR-03 with silent air cooling literally teabagged the performance of the stock HSF :)
10-13-2006, 06:24 PM
angel

This seems to be to good to be true :slobber:

Can you test how much this cooler can handle. Like try OC ing your card (if you are into oc' ing) and c what clocks can this thing take.

Even 70c @ full load would be nice without that jet engine sound that the stock cooler makes.
10-13-2006, 06:35 PM
Sneaky

right now I have the card at the same temps I had it at on water (just moderate OC's) - 700/820, but haven't pushed past that really

I can play with rivatuner later tonight and see what kinda clocks I can get out of it without voltage increases
10-13-2006, 07:42 PM
Squid_Spit

Very nice results, about time a decent hsf for gpus was released.
10-14-2006, 09:31 AM
Sneaky

some pics of the cooler installed:

http://www.fragtek.com/sneaky/omerta/omerta_03.jpg
http://www.fragtek.com/sneaky/omerta/omerta_04.jpg
http://www.fragtek.com/sneaky/omerta/omerta_05.jpg
10-14-2006, 11:19 AM
Aramdin

Damn that looks nice :) Cant wait till these pop up in the Netherlands!
10-14-2006, 11:25 AM
Sneaky

i can ship one out to you if you pay for shipping ;)
10-14-2006, 03:55 PM
Aramdin

That would be great if it wasnt for our customs, who intercept a lot of things, which will force us to pay custom rights (invoerrechten in dutch) & whatever more. It will cost about 50euro more if it gets intercepted!
10-14-2006, 04:03 PM
biohead

yea see what it does with higher volts. do you have a chance to test a high CFM fan on it? a delta?
10-14-2006, 04:19 PM
Sneaky

I hate ATI tool, so I won't be upping the voltages on my x1900XTX unless the creator releases the version of rivatuner that allows voltage changes... and I don't have any other 92mm fans available to me (unless I buy one)
10-14-2006, 04:39 PM
Vapor

ATi Overclocker can change volts (all but VDDCQ IIRC, actually), if you want to try an alternative.
10-14-2006, 05:48 PM
CPLB

I'm pretty sure the latest version of ATI Tray Tools can adjust voltages too.
10-14-2006, 06:33 PM
Jodiuh

Quote:

Originally Posted by Sneaky

I hate ATI tool, so I won't be upping the voltages on my x1900XTX...92mm fans

I finally tried to use this thing for OC and got a nasty artifact without going anywhere over stock 3d voltages and the same clocks I had whilst OCing in Overdrive. Perhaps Overdrive unlocked, then ATI Tool was causing the problem. I'll go for a full uninstall of CCC/driver then try ATI Tool again. BTW beta 14.

As for fans, is this it? 32CFM? I've got an SFLEX @ 49CFM going on shortly. Just gonna try and heat up the RAM so the Accelero removal process doesn't tear everything apart. :slapass:
10-14-2006, 07:37 PM
Sneaky

yeah... the only program that doesn't give me crap overclocking has to be rivatuner, which actually activates the 2d and 3d clocks, rather than just always running at 3d clocks (ati tool)

but yes, thats the fan I have on my HR-03 right now
10-15-2006, 01:45 AM
Jodiuh

Does Riva have higher clock limits than CCC? I'd like to see what OC I can get without adding extra V. Anyway, I've got some pics and soon temps...

Insert blade...saw.
http://img.photobucket.com/albums/v2...3/IMG_1289.jpg
http://img.photobucket.com/albums/v2...3/IMG_1287.jpg

So this pretty much explains the cooling differences.
http://img.photobucket.com/albums/v2...3/IMG_1291.jpg

The bracket's screws do not stick up enough to get through the card. So I stuck a piece of paper in there to bring them to the top. Def helped to guide the card onto the 4 screws without painting the core with a bunch of paste.
http://img.photobucket.com/albums/v2...3/IMG_1292.jpg

I stuck some "lifters" under the other 2 so as to give an accurate idea of the overall heights of these sinks.
http://img.photobucket.com/albums/v2...3/IMG_1294.jpg
http://img.photobucket.com/albums/v2...3/IMG_1295.jpg

Only one RAM chip had to be gimped!
http://img.photobucket.com/albums/v2...3/IMG_1298.jpg
http://img.photobucket.com/albums/v2...3/IMG_1299.jpg

And finally, here's a couple case shots.
http://img.photobucket.com/albums/v2...HR-03/new1.jpg
http://img.photobucket.com/albums/v2...HR-03/new2.jpg

EDIT: Temps

Room temp: 24C
Game: 10 minutes of Battlefield 2142 Demo w/ 40+ players
Settings: 1680x1050, high detail, 2xAAA, HQAS
Clocks: 698/792 in CCC

http://img.photobucket.com/albums/v2...HR-03Temps.jpg

The Vantec card cooler can be heard over the 5 Scythes. Adding a 6th Scythe's still a decent amount quieter than the Vantec and it cools a bit better. I didn't check for contact and wasn't 100% sure on install method. Also TIM had over a month to settle on the Accelero. The surface of the Thermalright had grooves and will be lapped and checked for contact tomorrow. Hopefully that'll bring my temps in closer to what the 2-3 of you have gotten so far.

About the install method. I stuck the rubber grommetts between the thumb nuts and backplate. How tight did you guys hug those on? Mine will still turn and I can see some threads on the other side of the card, but the sink wouldn't move. Wonder if I need to tighten more...
10-15-2006, 09:45 AM
CPLB

Nice review Jodiuh, thanks a lot for sharing.
10-15-2006, 10:00 AM
Aramdin

Great "little" review! I want one too, especially now :D Nice clean stacker dude
10-15-2006, 05:00 PM
Poodle

I missed this thread, don't hang out here in the cooling section much. I've been talking about it at Spcr quite a deal though.

I've had one since www.pc-coolning.de got them and I just love it. In my case the gpu is cooler with this one without a fan than the stock cooler at 100% :)

Thermalright is the cooler maker. The just keep making low weight coolers that performs like magic. :)
10-16-2006, 04:36 AM
Aramdin

Small typo dude, its http://www.pc-cooling.de ;)
10-19-2006, 05:48 AM
Dr_BenD_over

Sweet! Those would definitely solve my SLI cooling issues while still allowing me to use a Xfi.
10-21-2006, 11:46 AM
Revv23

Quote:

Originally Posted by biohead

yea see what it does with higher volts. do you have a chance to test a high CFM fan on it? a delta?

Looks like i was right about this cooler eh biohead?
10-21-2006, 01:11 PM
biohead

Quote:

Originally Posted by Revv23

Looks like i was right about this cooler eh biohead?

you mean as in: it's gonna be a very good cooler but a Big Typhoon will own it? ;) :D
10-21-2006, 05:01 PM
Jodiuh

There's another large difference with this and the accelero...cool down time. Within 30 seconds after gaming, I'm almost at idle. The Accelero would take much longer. I suppose it's an effect of the 120 49CFM blowing directly up to the dual 120 exhausts. Either way, it makes me happy. Now off for lapping! Hope fully I can hit 65C load.
11-04-2006, 02:23 PM
Tulatin

Hm, how wide is that gap from fins to base? I'm thinking it may be possible to wedge a thin 92mm under there for some push-pull action
11-05-2006, 09:52 AM
gelatinousfury

Man that's a sweet looking cooler. My accelero x2 will probably take a backseat to this cooler very soon :toast:
11-05-2006, 11:46 AM
mariosimas

here is mine sitting on top of a 7900 GTO:

Idle: 35ºC

Load: 53ºC

http://img125.imageshack.us/img125/3937/armor010kb1.jpg

http://img125.imageshack.us/img125/5...rmor007xn4.jpg
11-05-2006, 11:50 AM
davyjoneslocker

I just ordered one of these.

I see there are a few ways to mount this.
How did you guys mount yours?

Also, what grease did you guys use? The stuff provided, or somethign else like AS5 or zalman thermal grease?
11-06-2006, 03:00 PM
mariosimas

Quote:

Originally Posted by davyjoneslocker

I just ordered one of these.

I see there are a few ways to mount this.
How did you guys mount yours?

Also, what grease did you guys use? The stuff provided, or somethign else like AS5 or zalman thermal grease?

I use AS5.
11-06-2006, 03:09 PM
w00t!w00t!

Quote:

Originally Posted by mariosimas

I use AS5.

Is that a 120mm? looks bigger than a 92mm....
11-06-2006, 03:11 PM
gelatinousfury

Quote:

Originally Posted by mariosimas

I use AS5.

I agree, AS5 would be best as far as thermal conductivity goes vs. the stuff it probably comes with.
11-07-2006, 07:38 AM
mariosimas

Quote:

Originally Posted by w00t!w00t!

Is that a 120mm? looks bigger than a 92mm....

no it´s a Revoltek Dark Green 92 mm
12-27-2006, 08:44 AM
Dr_BenD_over

Anybody tried one of these on an X1950Pro (PCI-E)? Wanna make sure it's going to fit.
12-27-2006, 12:38 PM
Sneaky

same mounting holes as the other ATI cards... shouldn't have a problem
12-27-2006, 02:49 PM
BobMaximus

Incase nobody has said this, this DOES fit on a 7950gx2, but its a 5 slot solution... The top card of the two the hr-03 must face up, and the bottom one must face down.

All times are GMT -8. The time now is 12:50 AM.

XtremeSystems