E6600 OEM (open box)@564FSBx8, Vapochill LS, SPI 32M time.

Printable View

09-28-2006, 02:51 PM
epox4life

E6600 OEM (open box)@564FSBx8, Vapochill LS, SPI 32M time.

Just got my second E6600, this time an OEM (open box) from newegg.
My other E6600 cannot come close to this FSB with the exact same setup, at any multiplier.
This chip also does 4.57ghz@1.84vcore SPI 1M stable on the vapochill, 70mhz better then my other chip.

E6600 OEM week 27, 1.84vcore @ 4.512ghz = vcore mod
G.Skill PC2-6400 HZ's @ 2.66vdimm = vdimm mod
P5B-Deluxe with HR-05 NB cooler

The cpu did come in a retail box though, although newegg sold it as OEM.

Picture of setup.
http://star.walagata.com/w/fetuskiller/P9280235.JPG

SPI 32M Result.
http://star.walagata.com/w/fetuskiller/untitled.PNG
09-28-2006, 03:06 PM
bachus_anonym

Haha, damn, you got me by 1s, man! :lol: Awesome FSB MHz and 32M :up: I think I'm now gonna have to try even harder now :) Anymore left in that chip or that's all there is on Vapo?
Grats again :toast:
09-28-2006, 03:11 PM
epox4life

Quote:

Originally Posted by bachus_anonym

Haha, damn, you got me by 1s, man! :lol: Awesome FSB MHz and 32M :up: I think I'm now gonna have to try even harder now :) Anymore left in that chip or that's all there is on Vapo?
Grats again :toast:

For 32M i'm going to have to say no, 565fsb wasn't stable enough for it. And thats about all the memory has in it, so this is about it till some dry ice action. I can't run subs quite as tight as you bachus. ;)
09-28-2006, 04:50 PM
toddm27

damn, you've got 2 smokin chips there, hopefully this weekend I'll have my chip under phase to see what it's got in it
09-28-2006, 05:36 PM
INJViper

You definitly have a smokin chip there... congrats:clap:
09-29-2006, 12:31 AM
bachus_anonym

Quote:

Originally Posted by epox4life

For 32M i'm going to have to say no, 565fsb wasn't stable enough for it. And thats about all the memory has in it, so this is about it till some dry ice action. I can't run subs quite as tight as you bachus. ;)

The 6400C3 I've been using is doing really great, with low volts and as low sub-timmings as I can boot at (all of them I set in BIOS). But I can't make it to work for me with TRP=3 @ 550+, no matter what voltage I try - kind of odd. That would give probably around 2s extra (give or take) in 32M :)

I wonder what will happen when you put this one on DI as well... Hopefully, this chip will do 32M @ 4.7+GHz, and you'll manage even better result than with your previous E6600 on DI :up:
09-29-2006, 01:58 AM
epox4life

I'm still trying to figure out this memory, it may have been overvolted for this run throwing my time off a little.

Update* Tried to beat your new time of 11:29min bachus, now my memory is not playing nice.
09-30-2006, 07:46 PM
epox4life

Here's my best 32M time using x9 multi, still using stock vapochill LS.

http://star.walagata.com/w/fetuskiller/11.30x9.PNG
09-30-2006, 07:51 PM
bachus_anonym

Geez :slobber: 4.6GHz 32M-stable on VapoLS :eek:

Man, I don't predict my 11:27 to stay up for long as soon as you slap your DI container on it! Awesome, dude :up: It looks like this thing could do 4.8GHz on DI and you might even brush off of 11 minutes. That would rock!
:toast: :clap:

EDIT: What IDLE/LOAD temps are you seeing in AiSuite or PC Probe II at that voltage (which is?) and 4.6Ghz?
09-30-2006, 08:10 PM
epox4life

I havn't check those... the only temps I have checked are bios temps.

Before lapping
-2C cpu in bios @ 1.84vcore, SPI 1M max = 4.584ghz

After lapping
-7C cpu in bios @ 1.84vcore, SPI 1M max = 4.62ghz

This chip had one of the worse concaves I have seen out of 3, E6600's.
09-30-2006, 08:58 PM
bachus_anonym

That E6600 is definetely a keeper, man! Just for kicks, I upped vcore to 1.84v and my temps in BIOS/Idle PC Probe II are -13C/-15C and I still couldn't do SPi1M @ 4.52GHz :(

DI dude, DI :up:
09-30-2006, 09:20 PM
Charles Wirth

Very impressive, modded LS?
09-30-2006, 10:28 PM
epox4life

Quote:

Originally Posted by FUGGER

Very impressive, modded LS?

Stock, Delta TFB on the condenser.
09-30-2006, 11:15 PM
bachus_anonym

What are the secondary memory settings you have set for above run? Do you have a MemSet screen or perhaps a list from BIOS? I ask, because I think, at 512x9=4608MHz it might be possible to get a better result. Check this out:

492x9=4446MHz, DDR2-984 4-4-4.0 --> 11:52.250
494x9=4446MHz, DDR2-988 4-4-4.0 --> 11:49.406
496x9=4446MHz, DDR2-992 4-4-4.0 --> 11:44.906

If that is any indication, already at 4500Mhz (I can't try that, unfortunately), it might be possible to hit around 11:36... Just trying to get a fellow 32M'er get that one for your team :)
09-30-2006, 11:26 PM
epox4life

I set my timings in bios and they are actually tighter then your except, tRFC is 25 instead of 20. I think my memory is throwing out a lot of errors at this speed and timings.

http://star.walagata.com/w/fetuskiller/memsettings.PNG

What do you think I should be getting for a 32M at this speed?
10-01-2006, 12:08 AM
bachus_anonym

Quote:

Originally Posted by epox4life

What do you think I should be getting for a 32M at this speed?

I don't know man, but who knows, maybe even somewhere between 11:10 and 11:20...
10-01-2006, 12:13 AM
epox4life

Quote:

Originally Posted by bachus_anonym

I don't know man, but who knows, maybe even somewhere between 11:10 and 11:20...

It's probably my memory... any guesses what else it could be?
10-01-2006, 12:13 AM
ANP !!!

One of those Best Clocks n Timings i have ever Seen. Great RAM timings Bachus.
10-01-2006, 12:16 AM
bachus_anonym

Quote:

Originally Posted by epox4life

It's probably my memory... any guesses what else it could be?

Nah... I think you just need some "polishing" ;)
10-01-2006, 12:19 AM
epox4life

Quote:

Originally Posted by bachus_anonym

Nah... I think you just need some "polishing" ;)

numproc=1
maxmem=600
largesystemcache 1
Kill services
etc...

Maybe I need win2k?
10-01-2006, 03:16 PM
epox4life

Finally...

http://star.walagata.com/w/fetuskiller/11.26x9.PNG
10-01-2006, 03:24 PM
bachus_anonym

Quote:

Originally Posted by epox4life

Finally...

...your welcome, eh? :lol: Grats :up: Finally you got that one for your team :toast:
10-01-2006, 03:25 PM
epox4life

Quote:

Originally Posted by bachus_anonym

...your welcome, eh? :lol: Grats :up: Finally you got that one for your team :toast:

Yea, thanks for the help, your screen shots and all helped a lot. 4.6ghz runs are to hard to complete, so this one was at a slightly lower clock.
10-01-2006, 03:54 PM
J0d3r

Nice clocks for LS, and nice OEM 6600 :P

OT: Hey man you should change your title for "Insane vcore supplier" j/k :clap:
10-01-2006, 04:11 PM
epox4life

Quote:

Originally Posted by J0d3r

Nice clocks for LS, and nice OEM 6600 :P

OT: Hey man you should change your title for "Insane vcore supplier" j/k :clap:

That would be cool. :D
10-01-2006, 06:58 PM
nike

Quote:

Originally Posted by epox4life

numproc=1
maxmem=600
largesystemcache 1
Kill services
etc...

Maybe I need win2k?

haha .. largesystemdache=1 optimizes ur processincache 4 systemcache, not 4 programs, go into systemcontrol->system->advanced->configurations->advanced-> ull see .. after u set largesystemcache=1 ur ramusage is set 2 systemcache .. if set to 0 its optimized 4 programs, any1 tested if the largesystemcache=1 is faster? so andreyang said 1 time never optimize 4 systemcache if im rite ;) so im 2 lazy 2 post screenies .. im very lazy :P
//nike
10-10-2006, 04:20 AM
Blacklash

Is that E6600 an A or a B?

All times are GMT -8. The time now is 10:48 PM.

XtremeSystems