First test Cellshock 1000 on P5W64-WS PRO !!!

:D O.K. - here are first results. All done with BIOS 0209 and 2.4 Vdimm (Vmem):

C4:

http://img166.imageshack.us/img166/8418/542ramem7.jpg

C3:

http://img152.imageshack.us/img152/6069/c3ee3.jpg

As You can see the RAM on this board is limited by the 975 chipset and/or BIOS. Will try 0215 BIOS next days......

Hard to find stability - can only be fixed by a better BIOS released by ASUS (maybe 0215?) or we have to wait for RD600 and buy again a DFI board..

When trying lots of settings I can feel the RAM can do a lot more.

Finally one question, where is the point in searching for the highest mem frequency?

Remember this pic C4 with mem at 542 MHz:

http://img166.imageshack.us/img166/8418/542ramem7.jpg

And now watch this C4 at low 434 MHz:

http://img108.imageshack.us/img108/9584/sp1m3906uo7.jpg

Almost the same SP1M result - same CPU speed. So why all the work?

:confused:

:D :D Very Very nice stuff. Good to hear these PC6400 sticks work well on this board :) Now ive got to seel my GEIL, which for some reason wont boot up @ 4-4-4-12 1:1 past 350FSB.

1:1 no divider - faster in your case...

if u want to play with dividers and RAM MHz you´ll need some more MHz than "only" 1084...

@ Alonso was that remark for me.. care to articulate?

:D Here is another, 3-4-4-12 with 2.35 volts and read delay 5:

http://img223.imageshack.us/img223/7712/c3rd5qa0.jpg

Nice bandwith at 400 MHz !!! ;)

:toast:

sry - was for camouflage... he was asking about performance in SuperPi in 434 (1:1) and 542 (4:5);)

:D Update, SP32M 3-4-3-9 at only 2.3 volts - read delay 5 :

http://img215.imageshack.us/img215/4...32m36c3gc0.jpg

I smell some more C3 potencial in these sticks.......... :p:

:toast:

Shiz wanted to order but now it seems the whole of XS bought all stock :)
Humzzzz...i hate waiting, Alonso do you where they sell these in The Netherlands?

Quote:

---

Originally Posted by Ibinco

Shiz wanted to order but now it seems the whole of XS bought all stock :)
Humzzzz...i hate waiting, Alonso do you where they sell these in The Netherlands?

---

:D You can buy here - shipment to whole Europe and RAM in stock (Sept/28) !!! ;)

http://www.shadowpc.de/artikel.php?artikel=1181

:toast:

Any 32m possible?

Quote:

---

Originally Posted by hicookie

Any 32m possible?

---

:rolleyes: Hm, take a closer look at post #7.............. :stick:

Memory doesn't matter as much in 1M or 2M as in 16M or 32M because of the large L2-cache on Conroe, and that's the reason you only see slight improvement with all that memoryspeed. Try running a comparison on 32M or maybe some 3d (3dm01 loves the memoryspeed) :)

Quote:

---

Originally Posted by elmor

Memory doesn't matter as much in 1M or 2M as in 16M or 32M because of the large L2-cache on Conroe, and that's the reason you only see slight improvement with all that memoryspeed. Try running a comparison on 32M or maybe some 3d (3dm01 loves the memoryspeed) :)

---

:D Thanks - I see. Will try the 0215 BIOS tonite. On this board/chipset I can get better results and more stability when running 1:1 with tighter timings.

Finally the RAM & CPU is better than chipset and/or BIOS, so my hopes are high on RD600..........:)

:toast:

:D Lowered the Vdimm down to 2.25, timings now 3-4-3-4, read delay 5 and voila, 32M below 14min at only 3.6GHz :


http://img237.imageshack.us/img237/5569/2253434ll8.jpg

Still 0209 BIOS.

:toast:

nice rams sir.. :)

great

:cool: Just flashed 0215 BIOS but bandwith and 32M was a bit lower in my tests.

Will flash back to 0209 later and make some furter tests for compario. Maybe 0209 BIOS is better.

BTW - 0215 enables installation of MARVEL RAID for those who need.

:toast:

:D UPDATE:

BIOS 0209 is faster for me, here we have DDR2-840 C3 and read delay still 5 with 2.4 volts:

http://img166.imageshack.us/img166/6204/2403434pa2.jpg

For further tests C3 I have to volt-mod the board to get higher Vdimm.

Will give this simple pencil mod here a try:

http://sg.vr-zone.com/?i=4060

:toast:

:D Vdimm mod worked - now I can play with up to 2.85 volts......:banana:

More to come here soon.........................;)

:toast:

Quote:

---

Originally Posted by camouflage

:D UPDATE:

BIOS 0209 is faster for me, here we have DDR2-840 C3 and read delay still 5 with 2.4 volts:

[IMG]***[/IMG]

For further tests C3 I have to volt-mod the board to get higher Vdimm.

Will give this simple pencil mod here a try:

http://sg.vr-zone.com/?i=4060

:toast:

---

Wow very good pair of ram you got there , but your 32m seems to me a bit low, I have the exact same time with "only" 3.7ghz on the CPU and 4-4-3-8 on SuperT cl4 /too bad Intel 975XBX have only 2.2v without mod:( / And my e6600 is trothling with box cooler :p: and in second part of the test it is slowing by a margin./
http://img96.imageshack.us/img96/481...3700qf8.th.jpg

:D To stop boring You all I skipped some Mhz and now we have here DDR2-900 C3 with 2.58 Vdimm and read delay still at 5. The Vdimm was measured by a multimeter:

http://img419.imageshack.us/img419/60/2583434oq7.jpg

Remember this is RAM out of the box and on an unmodded board except of the Vdimm pencil mod.

I'm not sure how much voltage this RAM can bare but hipro did some tests at crazy 3.4 Vdimm so I think I'll go up to my max. of 2.85.

If I should need more I have to pencil again........... :stick:

Oh, and I almost forgot - now with 4:5 divider. Unfortunately I only can use multi 9 ( known problem with the changable multi in BIOS but non-working in Windows) cause my CPU maxes out at 9 x 445.

:toast:

sorry offtopic but do you have to write that text with huge font size :confused: :stick:

Quote:

---

Originally Posted by Dani

sorry offtopic but do you have to write that text with huge font size :confused: :stick:

---

:( Sorry to stretch Your nerve - will use smaller size in future......... :slap:

:D Now it's time to tighten the timings (thanks to hipro !!!):

http://img218.imageshack.us/img218/8...32m3331iy7.jpg

This is done with only 2.33 Vdimm so everybody can do even without Vdimm mod..........:toast:

:D And this is my membership in the "11+ GB bandwidth club" ......:

http://img218.imageshack.us/img218/8...embenchhc1.jpg

Done with 2.66 Vdimm - can't try for more cause my CPU is maxed out on water at 4GHz...........:(

This RAM is unbelievable hungry to get squezzed...........:slapass:

:woot: :banana:

Quote:

---

Originally Posted by camouflage

:D Now it's time to tighten the timings (thanks to hipro !!!):

http://img218.imageshack.us/img218/8...32m3331iy7.jpg

This is done with only 2.33 Vdimm so everybody can do even without Vdimm mod..........:toast:

---

Care to share what tweaks you've used/Hipro gave you or is it 'classified information'?;)

:D New personal SP1M record, 2.71 Vdimm:

http://img355.imageshack.us/img355/1...1m12562sv4.jpg

@JochenP:

No secret, taken from here:

http://www.xtremesystems.org/forums/...d.php?t=117559

:toast:

:D Oh, I forgot to show the detailed mem settings - here we go:

http://img505.imageshack.us/img505/7...set3331lk1.jpg

:toast:

:D SP32M:

http://img245.imageshack.us/img245/1...2m41859er4.jpg

:woot: :banana:

:D Update - finally got 11.3GB bandwidth.......:eek: :

http://img282.imageshack.us/img282/5...embenchap4.jpg

:woot:

I'm in talks with Cellshock to start selling this memory in the U.S. Hopefully we'll have more info in a week or two - sometimes these things take ages to iron out :)

Quote:

---

Originally Posted by TankGuys

I'm in talks with Cellshock to start selling this memory in the U.S. Hopefully we'll have more info in a week or two - sometimes these things take ages to iron out :)

---

:D Yes - best wishes to all clockers overseas in the US - hope You can buy it soon in America...

BTW at the moment seems to be almost sold out in Germany & Austria......:eek:

:banana: :eek: :banana: I just recieved my Cell Shock memory PC6400!!!
Im gonna get testing...Camouflage i can only say thanks already for being so elaborate about your result on this thread!!! Ill keep you guys posted om my results :woot:

I have a set of Cell Shock 6400 2GB.
does 1000Mhz 4-4-4-8 2,2vdimm ( on AM2 system)

http://users.telenet.be/taye/pics/Ce...prime%203h.jpg

needless to say ,I'm very happy with my sticks

@ Jaco... Thats a very very nice result. I hope i can go that high. My motherboard seems to be holding me back. Anything above the 400FSB becomes a really difficult deal.

Quote:

---

Originally Posted by Ibinco

@ Jaco... Thats a very very nice result. I hope i can go that high. My motherboard seems to be holding me back. Anything above the 400FSB becomes a really difficult deal.

---

:D Then go for 400Mhz CAS2...........:hehe:

No no - just a joke, I'm kidding..........;)

Ok,got down to some testing.

This is my first attempt @ 400MHx bios 0301 2.35vdimm

http://img155.imageshack.us/img155/1...lshock1aj6.jpg
Im liking these babies!:banana:

:D UPDATE, 1:1 DDR2-900 3-3-3-1 SP1M :

http://img135.imageshack.us/img135/9...1m12453zd9.jpg

:toast:

my god thats sexy


this cellshock is lookin better and better now



very nice so far!

Quote:

---

Originally Posted by Sneaky

my god thats sexy


this cellshock is lookin better and better now



very nice so far!

---

I love this RAM, really. Sold my CORSAIR 8500 C5 for it..........;)

Wooooot!

This RAM is extreme stuff!!! :woot: been running it the past 2 days 24/7

2v vdimm @ 824mhz!!!!

I like i like i like!!!!!

This is with cellshock 1000 cl4 @1200 @2,6v with good subtimings (even though mobo is asus p5b-dlx).
Pretty decent for 2x1gb set.

Nice ram:toast:

Don't use >2.5V for extended time. Its not good for the ram.

thx
yes i am aware of that for the d9gkx, 2,2v for everyday use for me :)

I'm posting here verified cpu-z @ 3-3-3-4 @ 2,25/2,30v 1:1 400 mhz
of My CellShock PC6400


DDR2 800 Mhz - 3-3-3-4

http://valid.x86-secret.com/show_oc?id=136118


DDR2 1000 Mhz - 5-5-5-15 default voltage (2,1v)

http://valid.x86-secret.com/show_oc?id=136249



Hugs xD

Isn't cellshock D9GMH?

It seem that all kits can easily do 1200 32M with relaxed timings and 2.5V+

My cellshock is also 32M stable 1200 5-5-4 2.6V

This is on my daily rig 32M run
http://www.xtremesystems.org/forums/...1&d=1162931303

amazing what a little bit of VOLTAGE will do :D

:D KIWI - plz switch to memset 3.0 for better compario........;)

:fact: BTW - If You bench outside at -4°C it might be Your CELLSHOCK RAM is doing this:

http://img176.imageshack.us/img176/7...1m12172cu6.jpg

:toast:

kiwi

the PC 6400 and PC 8000 5-5-5 are GMH
pc 8000 4-4-4 are GKX
:D


camouflage
cherry picked? ;) are these PC 8000 4-4-4 ?

8000c5 can also be gkx - there are even some 800c4 with gkx out there ;)

Quote:

---

Originally Posted by GrimReaper

kiwi

the PC 6400 and PC 8000 5-5-5 are GMH
pc 8000 4-4-4 are GKX
:D


camouflage
cherry picked? ;) are these PC 8000 4-4-4 ?

---

:D Yes - but not cherry picked !!! Retail version bought from an online store.

:toast: