TeamGroup DDR2-800 4-4-4-10 2x1GB kit

Printable View

09-25-2006, 01:57 PM
ozzimark

TeamGroup DDR2-800 4-4-4-10 2x1GB kit

So, I've seen a few people asking where the review is on this kit.... This will be a work in progress of sorts. I've been really busy lately, but when I get time, I try to run a few more benches. Still in the process of hashing out the maximum speeds.. Feel free to make specific requests, keeping the limitations of my poor little sempron in mind :lol2:

Obviously, as the title implies, the kit is rated for 4-4-4-10 at 400mhz. Not bad, but not the best stock speed. I think it can still hang in there with the big boys though...... :cool:

http://www.eclipseoc.com/image/memor...2x1gb/spec.jpg
http://www.eclipseoc.com/image/memor...x1gb/chips.jpg

I'll organize results by timings, then voltage, going from low to high....

3-3-3
There is an issue with CPU-Z and 3-3-3.. not showing trp right. Oh well, it IS set to 3, I promise.
2.39v
403.0mhz @ 3-3-3-7, 2T - 32M completed

2.6v
429.1mhz @ 3-3-3-7, 2T - 32M completed

2.81v
450.3mhz @ 3-3-3-7, 2T - 32M completed - I kinda like this shot. Things were originally turning out to be kinda boring at 3-3-3, and judging from results at lower voltage, I didn't think that 450mhz was gonna be stable at any voltage, but the sticks pulled through, they scale really well with voltage, and probably have a bit more left in them, but I'm gonna save the all out 3.0v benching for a cold night after everything else is sorted out :)

4-4-3
Here... some issues were encountered. I later figured out the issue to be the trp 3, 4 was much more predictable. The long and short of it is that the results were very inconsistant. Tweaking was key here, dropping one drive strength from 1.5x to 1.0x gained about 30mhz of stability at when running 4M the same timings and voltage. Saying that I was stunned would be an undestatement. This kind of varience is most likely why I was seeing the inconsistancies I was... 2.5v ended up giving the maximum stable speed at 511mhz. 2.6v dropped it to around 495mhz. I'll be looking into this more later....

2.5v
511.9mhz @ 4-4-3-8, 2T - 32M completed

4-4-4
Here most of the issues that I was having with trp 3 went away. First up.. 450mhz at 1T!

2.2v
450.3mhz @ 4-4-4-10, 1T - 32M completed - :eek: 1T! Not bad for a sempron IMC.. I think the DFI board is helping this out a bit. I might be able to redo this shot with 3-3-3 timings and a lot more voltage, but I haven't tried yet. Note that the time is still slower than 3-3-3, 2T at the same mhz.

2.6v
557.6mhz @ 4-4-4-8, 2T - 32M completed - Now we're getting somewhere with the mhz....

5-5-4
Now.. I'm surprised here. Not as good as the very top kits I've seen, but for being a random retail kit, not bad.

2.29v
564.8mhz @ 5-5-4-8, 2T - 32M completed

How about a smidge more voltage?
2.39v
Here is where I start running into trouble. It's warm out, my sempron is fighting to keep up here. First I run 8M just to see what can be done.. knowing that I'm gonna hit a limit around 2.95ghz.
591.4mhz @ 5-5-4-8, 2T - 8M completed
Seems that it barely squeezed by. Can 32M make it? Apparently so :woot:
591.4mhz @ 5-5-4-8, 2T - 32M completed

Pushing it a bit higher, the cpu needs more volts and colder temps. Anything more than 1M will give a random reboot no matter what the ram is running at :(
602mhz @ 5-5-4-8, 2T - 1M completed

2.45v
599.6mhz @ 5-5-4-7, 2T - 32M completed

5-5-4 with 15c ambient!

2.0v
547.1mhz @ 5-5-4-7, 2T - 32M completed

2.1v
570.5mhz @ 5-5-4-7, 2T - 32M completed

2.2v
587.5mhz @ 5-5-4-7, 2T - 32M completed

2.29v
Here I appear to be CPU limited. I'm anxiously awaiting amd's 65nm chips ;)
Amazing that the sticks went from 564 to 610mhz at the same voltage. shows how important tweaking memory settings are, huh? :hehe:
610.3mhz @ 5-5-4-7, 2T - 32M completed

That'll be it for now. As I said earlier.. this will be updated with more results when I get them, and if anyone wants to see anything in particular, I'll be glad to do what I can... ;)
09-25-2006, 02:23 PM
Exedy

600@5 2.4v...for the price its very nice :clap:
09-26-2006, 06:35 PM
erwinz

nice insights man.. :D hope we can see sisoftsandra's and everest.. :)

your ram :rocker: 's
09-26-2006, 06:49 PM
FLMJIGGY

Looking sweet! You never disappoint! Go E-OC!
09-26-2006, 10:53 PM
maarrk

Thanks heaps info most welcome :clap:
09-26-2006, 11:20 PM
fatty

Nice what happened to the silver heat spreaders
09-27-2006, 01:01 AM
over@locker886

Nice results! I get pair 2days , and If I have free time, I'm testing:)
2 results:
1040Mhz 4-4-4-5 2,42v Superpi 32M stabil
1075Mhz 4-4-4-5 2,44v Superpi 1M stabil
09-27-2006, 03:08 AM
ozzimark

Quote:

Originally Posted by erwinz

nice insights man.. :D hope we can see sisoftsandra's and everest.. :)

your ram :rocker: 's

i'll run a few benches. bandwidth will be on the lower side though; single core AM2

Quote:

Originally Posted by over@locker886

Nice results! I get pair 2days , and If I have free time, I'm testing:)
2 results:
1040Mhz 4-4-4-5 2,42v Superpi 32M stabil
1075Mhz 4-4-4-5 2,44v Superpi 1M stabil

good luck :toast:

Quote:

Originally Posted by fatty

Nice what happened to the silver heat spreaders

no idea! :confused2
i guess my pair just didn't feel like being clothed. naked ftw :cool:

busy day today, but i'll see if i can get any more benches up by tonight. i feel like 32m might be doable at 600mhz.. ;)
09-28-2006, 09:02 AM
ozzimark

heh, here we go.... :D
2.45v set in bios. board is undervolting about .02v for 2.43v. not sure why when it was accurate before :confused2

http://www.eclipseoc.com/image/memor...-32M-2.45v.png
09-30-2006, 05:51 AM
ozzimark

ok, I figured it out. the board starts undervolting the ram when the ambient temps get low. I countered this by raising vdimm to get as close to what I wanted without going over... had some fun with the cold though ;)

how about ddr2-1094 at 2v.. close to 550mhz with so little voltage :eek:

http://www.eclipseoc.com/image/memor...T-32M-2.0v.png

and to think that before I needed 2.29v to hit 564mhz :confused2
2.2v set:

http://www.eclipseoc.com/image/memor...T-32M-2.2v.png

and then finally... 2.29v. hitting a cpu limit here :slapass:

http://www.eclipseoc.com/image/memor...T-1M-2.29v.png
09-30-2006, 07:36 AM
over@locker886

Thx, testing.

In INTEL
I wait new board asus p5b deluxe..

Yesterday I tested:

Superpi
32M: 1065Mhz 4-4-4-12 2,49v
1M: 1096Mhz 4-4-4-12 2,49v

Later I upload images..
10-02-2006, 12:59 PM
over@locker886

2,49v
http://kepfeltoltes.hu/061002/tgx110...toltes.hu_.jpg

http://kepfeltoltes.hu/061002/tgx107...toltes.hu_.jpg
10-02-2006, 01:54 PM
Lestat

good lord... wow!!
10-02-2006, 03:04 PM
TeamUSOffice

Quote:

Originally Posted by over@locker886

2,49v
http://kepfeltoltes.hu/061002/tgx110...toltes.hu_.jpg

http://kepfeltoltes.hu/061002/tgx107...toltes.hu_.jpg

:clap: Great JOB!
10-02-2006, 03:05 PM
ozzimark

Quote:

Originally Posted by TeamUSOffice

:clap: Great JOB!

i agree. definitely a nice bench. i'll have to see if i can match it when i get a few min :toast: (excluding the time of course. silly sempron :D)
10-04-2006, 12:05 AM
over@locker886

Quote:

Originally Posted by TeamUSOffice

:clap: Great JOB!

Thank you:) and I memset use not yet..

On Friday I will have lot of new results in vmod-ed p5b deluxe.
10-04-2006, 12:51 AM
erwinz

Quote:

Originally Posted by ozzimark

ok, I figured it out. the board starts undervolting the ram when the ambient temps get low. I countered this by raising vdimm to get as close to what I wanted without going over... had some fun with the cold though ;)

how about ddr2-1094 at 2v.. close to 550mhz with so little voltage :eek:

and to think that before I needed 2.29v to hit 564mhz :confused2
2.2v set:

and then finally... 2.29v. hitting a cpu limit here :slapass:

nice results.. with such little voltage.. :clap:
10-04-2006, 01:33 AM
ozzimark

Quote:

Originally Posted by erwinz

nice results.. with such little voltage.. :clap:

thanks, i was honestly surprised myself. i was a touch dissapointed initially, though 600mhz at 2.45v is still awesome. 610mhz with 2.29v is way more awesome :cool:

i've been really busy with school work lately, so i haven't been able to do any more testing, but i'll try to get some 4-4-3 and 4-4-4 results in sometime soon :toast:
10-04-2006, 04:44 AM
over@locker886

Quote:

Originally Posted by ozzimark

thanks, i was honestly surprised myself. i was a touch dissapointed initially, though 600mhz at 2.45v is still awesome. 610mhz with 2.29v is way more awesome :cool:

hmm,interesting, I will test lesser voltage me too:)

And I expect tiptoe your results on AMD.:toast:
10-10-2006, 08:00 AM
over@locker886

upper on still 2,49v

1105Mhz 4-4-4-8
http://kepfeltoltes.hu/061010/tgx110...toltes.hu_.jpg
1090Mhz 4-4-3-8
http://kepfeltoltes.hu/061010/tgx109...toltes.hu_.jpg
1057Mhz 4-4-3-8
http://kepfeltoltes.hu/061010/tgx105...toltes.hu_.jpg
10-10-2006, 09:19 AM
kutujambak

ozzi
can u send me dump for thaiphoon burner?
10-10-2006, 10:00 AM
ozzimark

Quote:

Originally Posted by kutujambak

ozzi
can u send me dump for thaiphoon burner?

sure, why do you ask..?
10-10-2006, 12:36 PM
kfc

ozzimark can you PLEASE post the specs of your rig? :D
10-10-2006, 12:56 PM
ozzimark

oops! my bad, i thought i did. most of it can be seen in the screenshots, but..

Sempron 3400+ AM2 - water cooled
DFI Lanparty NF590 SLI-M2R/G
MSI 7600GT
OCZ Powerstream 420w
assorted drives and lots of fans

end setup closely resembles this:

http://www.eclipseoc.com/image/bench%20rig/rig.jpg
10-10-2006, 02:23 PM
kfc

Tankguys sells - TXDD2048M800HC4DC
You have - TXDD2048M800C4DC

Whats up with that?
10-10-2006, 03:42 PM
TeamUSOffice

Quote:

Originally Posted by kfc

Tankguys sells - TXDD2048M800HC4DC
You have - TXDD2048M800C4DC

Whats up with that?

I think that would be a typo from the sticker company.

He has the TXDD2048M800HC4DC set just the sticker is incorrect.
10-10-2006, 04:25 PM
charlie

nice performance for the price.
10-10-2006, 06:02 PM
kutujambak

Quote:

Originally Posted by ozzimark

sure, why do you ask..?

i want to write it to my xtreem to change the spd values,i have same chips with u..my biostar have a booting issue if i set mem divider higher than spd..
10-12-2006, 10:43 PM
over@locker886

still 2,49v :D

1085Mhz 4-4-4-5
http://img219.imageshack.us/img219/3...32m4445ha1.jpg

1070Mhz 4-4-3-4 :D
http://img176.imageshack.us/img176/7991/1070ras3eg4.jpg
10-13-2006, 12:17 AM
[cTx]Philosophy

Nice results ozzi, poor sempy..
Mine are naked also, this is D9GMH isnt it? (yours I mean)
10-13-2006, 03:24 AM
ozzimark

Quote:

Originally Posted by [cTx]Philosophy

Nice results ozzi, poor sempy..
Mine are naked also, this is D9GMH isnt it? (yours I mean)

thanks ;)
indeed they are... i've actually seen very very few kits of teamgroup ddr2 that are not D9GMH :D
10-15-2006, 12:30 PM
K404

I got a set of TX D9GMH, so far i`m rocking:

2.20V: 525MHz 4-4-3
2.35V: 420MHz 3-3-3
2.45V: 575MHz 4-4-3

All voltages measured with DMM, board is a P5B DH.

Pics on request, just wanted to throw in another set of numbers for comparison :D

These Team sticks ROCK, no 2 ways about it
10-15-2006, 12:32 PM
ozzimark

:slobber:

yours are even better than mine :D
how do they do at 5-5-4?
10-15-2006, 12:53 PM
K404

Not tried 5-5-4 yet :D Tried 5-5-5 earlier at easy clocks, but windows wouldnt load...weird. Part of me thinks something didnt like RAS Precharge at 5..will keep at it :)

I`m taking my time finding out what this RAM can do...get as much fun out of this lot of gear as I can :D
10-16-2006, 02:39 AM
over@locker886

Quote:

Originally Posted by K404

I got a set of TX D9GMH, so far i`m rocking:

2.20V: 525MHz 4-4-3
2.35V: 420MHz 3-3-3
2.45V: 575MHz 4-4-3

All voltages measured with DMM, board is a P5B DH.

Pics on request, just wanted to throw in another set of numbers for comparison :D

These Team sticks ROCK, no 2 ways about it

Did you use in Asus P5B deluxe? What bios?
10-22-2006, 07:20 AM
K404

Asus P5B yes. BIOS 0714 IIRC

I`m having trouble with the 4:5 divider on this board, its making things harder than they need to be :( I cant get above FSB 445 on a 4:5 with any multiplier
10-22-2006, 07:33 AM
GrimReaper

good job, can you tell me how far these would go on the stock 2.2V ? whats the best timing and maxium speed they could do?
:toast:
10-22-2006, 08:33 AM
ozzimark

Quote:

Originally Posted by GrimReaper

good job, can you tell me how far these would go on the stock 2.2V ? whats the best timing and maxium speed they could do?
:toast:

this chart of any help? :toast:

http://www.eclipseoc.com/image/memor...02x1gb/vvt.png

each mhz represents max 32M stable at that voltage and timings
10-22-2006, 12:08 PM
-n7-

Quote:

Originally Posted by ozzimark

this chart of any help? :toast:

http://www.eclipseoc.com/image/memor...02x1gb/vvt.png

each mhz represents max 32M stable at that voltage and timings

Beautiful! :slobber:

I am still kicking myself for buying the Team Group PC2-8000 stuff when the 667/800 is actually better RAM, & does higher clocks for less, not to mention tighter timings at lower frequencies.
Not that it's bad...it's just not great.
10-22-2006, 12:11 PM
ozzimark

imo, a lot of it is luck, and quality of the supporting hardware. this dfi totally kicks ass with 5-5-4, thus why the ram seems to do so well at 5-5-4 compared to how it's doing at 3-3-3 and 4-4-4
10-22-2006, 12:13 PM
The_NamelessOne

i got a pair of these , i didn't have much time to test them ...my sticks clock quite well @ 5-5-5, 600Mhz 32m stable 2.45v ( p5b deluxe max )...but fairly average 3-3-3 and 4-4-4, ...but i'll test them more accurately when i have time ;) nothing special, but very good performance for the price :up:

http://img356.imageshack.us/img356/8...biliaw2.th.jpg
10-23-2006, 08:33 AM
lowfat

I should be receiving my set tomorrow, hopefully they clock as well as these.
10-23-2006, 08:35 AM
GrimReaper

Quote:

Originally Posted by ozzimark

this chart of any help? :toast:

http://www.eclipseoc.com/image/memor...02x1gb/vvt.png

each mhz represents max 32M stable at that voltage and timings

awesome job man thanks :toast:
10-23-2006, 11:21 AM
ozzimark

thanks, though i have to ask.. if i could change anything in the formatting of the chart, what should i do? :toast:
10-23-2006, 03:10 PM
GrimReaper

well its no big deal but you could use some different colors :p: the 2 dark blues look somewhat similar on my color faded lcd :banana:

:toast:

p.s
really good job :D
10-23-2006, 03:21 PM
ozzimark

i'll make it go from blue to white then, more contrast :toast:
10-28-2006, 01:15 AM
Dax5

nice results! i just got mine!
10-28-2006, 02:34 AM
dab420

:D Got mine this morning!
10-28-2006, 03:34 AM
jimwah

I got the 2x512 kit w/ heatspreaders earlier this week - going to have a play around today since I just threw them in 440/5-5-5-15/2.15v when I got them.

edit> can't pass 450/5-5-5-15 with loose settings on P5b & 2.4v.. I'm missing something in BIOS or these are not so great sticks :shrug: I've been testing with Large FFT on orthos.
10-28-2006, 07:38 AM
lowfat

Mine aren't scaling very well either although I don't know if is the board or not. The board/CPU won't do more than 480 1:1, and a 4:5 ratio at any settings is never stable. So far @ 429 4-4-3-4 with 2.2V completely stable.
10-28-2006, 07:51 AM
ozzimark

Quote:

Originally Posted by jimwah

I got the 2x512 kit w/ heatspreaders earlier this week - going to have a play around today since I just threw them in 440/5-5-5-15/2.15v when I got them.

i bought a retail 2x512mb kit too.. break 600mhz at 2.13v. :eek:

let me know what settings you guys are using, i'll see if i can help you out at all :toast:
10-28-2006, 08:53 AM
cyberion86

Motherboard = Gigabyte DS3, F7 Bios
vDimm = 2.15
vMCH = 1.55

cant even break 500 with timing 5-5-5-15. Need advice...
10-28-2006, 09:51 AM
ozzimark

imo, the gigabyte is one of the most picky boards ever. F7 is the latest bios?

memset shots are always nice ;)
10-28-2006, 10:02 AM
jimwah

Quote:

Originally Posted by ozzimark

i bought a retail 2x512mb kit too.. break 600mhz at 2.13v. :eek:

600! :toast: Well here's my timings at the moment on my P5b, I slacked them off to 6-6-6-18 to get over the 450mhz [i'm @ 457mhz & 2.25v iirc] - otherwise I left all other BIOS timings as they were.

http://i3.photobucket.com/albums/y68/jandz/memset.jpg

edit> added memset screenie
10-28-2006, 10:14 AM
ozzimark

do you hit the same limit with all the memory ratios? doe increasing MCH voltage help any? :toast:
10-28-2006, 10:38 AM
jimwah

I'm as high as I want to go on NB volts (1.55), & I've only run 1:1 since I need the cpu mhz for maximum folding ;) I'll let it run overnight & have another crack at it tomorrow.

The SPD on these sticks: 400mhz/3-4-3-9-22 (2T) & 533mhz/5-5-5-15-0 (2T).
seems a bit ambitious to me. Does CPu-z read these correctly in general?
10-28-2006, 10:52 AM
over@locker886

Quote:

Originally Posted by ozzimark

i bought a retail 2x512mb kit too.. break 600mhz at 2.13v. :eek:

let me know what settings you guys are using, i'll see if i can help you out at all :toast:

1:This ram , and lot of ram better run AMD then Intel. AMD use integrated memory controller...
2: And Intel section is too different, 965 and 975 chipset ram controller..

But we can help together;)
10-28-2006, 02:58 PM
ozzimark

Quote:

Originally Posted by over@locker886

But we can help together;)

:woot:
that we can.. i have limited experience with intel, but some things just kinda click.. :p:

jimwah, you max out at 450mhz with 6-6-6-18.. how far can you get with 4-4-3-11 at the same volts?
10-28-2006, 10:38 PM
cyberion86

1 Attachment(s)

Quote:

Originally Posted by ozzimark

imo, the gigabyte is one of the most picky boards ever. F7 is the latest bios?

memset shots are always nice ;)

yea f7 the latest. ds3 not perform well on d9? what about p5b vanilla?
10-29-2006, 02:19 AM
jimwah

Quote:

Originally Posted by ozzimark

jimwah, you max out at 450mhz with 6-6-6-18.. how far can you get with 4-4-3-11 at the same volts?

I used the 6-6-6-18 just to bump me over the 450mhz barrier I seemed to hit with 5-5-5-15; 457mhz on the slacker settings ran all night without issue.

4-4-3-11 just bombed out of orthos Large FFT's after 3 mins @ 400mhz/2.25v; I rebooted at 410 just to see how close to the limit they were, & the BIOS hard locked :eek: Tried 410/4-4-4-11 & it hard locked again :shrug: Back to the baggy settings until I get some more time to play later.
10-29-2006, 07:15 AM
majestyk

I see this kit is rated at 2.0-2.2v. Will it boot a P5B-E at 1.8v ????
10-29-2006, 07:26 AM
lowfat

Quote:

Originally Posted by majestyk

I see this kit is rated at 2.0-2.2v. Will it boot a P5B-E at 1.8v ????

Mine boot with auto voltages on my P5B-D.
10-29-2006, 09:10 AM
majestyk

Quote:

Originally Posted by lowfat

Mine boot with auto voltages on my P5B-D.

Thanks. I going to get the -E or Deluxe, so hopefully won't encounter that problem.
10-29-2006, 09:08 PM
-n7-

My PC2-8000 Team kit is rated 2.1-2.3V, & it booted fine with my P5B Deluxe defaults.
10-30-2006, 04:05 AM
Renasc

Whoa baby!

610.3mhz @ 5-5-4-7, 2T @ 2.29v!!!!
10-30-2006, 04:26 AM
ANP !!!

Cant wait for my TG DDR2-800 2gb to get into Action :toast:. Nice result guys. :)
10-30-2006, 10:43 AM
lowfat

I don't think it is my ram that is holding my OC's back but my P5B-D. I can't even post with 2.2V dimm the majority of the time. So hopefully with a different board I'll be able to take the OC higher.
10-30-2006, 12:14 PM
-n7-

Anyone know why the TG stuff can reach such low TRAS?

I was testing mine out last night, & i could do DDR2-1050 5-5-4-4, though not Orthos stable for more than 45 minutes.

Is the low TRAS capable because of the Intel chipsets, or is it just Team Group RAM that can do such a low TRAS.

I'm not complaining obviously :D

Just curious why it can run so low as opposed to normal values.
10-30-2006, 12:18 PM
over@locker886

Quote:

Originally Posted by -n7-

Anyone know why the TG stuff can reach such low TRAS?

I was testing mine out last night, & i could do DDR2-1050 5-5-4-4, though not Orthos stable for more than 45 minutes.

Is the low TRAS capable because of the Intel chipsets, or is it just Team Group RAM that can do such a low TRAS.

I'm not complaining obviously :D

Just curious why it can run so low as opposed to normal values.

My settings:

http://img100.imageshack.us/img100/7173/4gbdg2.jpg
10-30-2006, 12:58 PM
Yoxxy

I don't know I think it is the Intel. I had 2 sets of OCZ that could hit Tras 4 at all latencies the ram was otherwise stable at. My Team Groups could do it too but couldn't keep it stable. Then went from 4 to 5 and teamgroups were stable.
10-30-2006, 03:12 PM
aceuk

i have this memory why does cpuz say these timings?
can anyone help
thanks

http://img57.imageshack.us/my.php?image=image2px6.jpg
10-30-2006, 03:30 PM
ozzimark

hm, looks like a boo-boo with the spd programmer... i wouldn't worry about it
10-30-2006, 04:33 PM
Onepagebook

Quote:

Originally Posted by aceuk

i have this memory why does cpuz say these timings?
can anyone help
thanks

http://img57.imageshack.us/my.php?image=image2px6.jpg

Hi, dear friend, no worries, sometimes due to the spd programmer 's mistake so some sticks will mess up, but as long as you not fill comfortable, we will take care of that.
you can either PM me for solution or pm teamusoffice, we are more than happy to correct that.:)

OPB
10-31-2006, 12:41 AM
jimwah

Quote:

Originally Posted by jimwah

The SPD on these sticks: 400mhz/3-4-3-9-22 (2T) & 533mhz/5-5-5-15-0 (2T).
seems a bit ambitious to me. Does CPu-z read these correctly in general?

This is the same SPD on my sticks as aceuk's.
10-31-2006, 07:42 AM
Quentin

me too

http://daftou59.free.fr/Screen/Teamg...Dteamgroup.png

:confused:
10-31-2006, 10:45 AM
aceuk

Quote:

Originally Posted by Quentin

me too

http://daftou59.free.fr/Screen/Teamg...Dteamgroup.png

:confused:

what sort of speeds are u getting with yours?
10-31-2006, 12:24 PM
maxtypezero

Quote:

Originally Posted by over@locker886

My settings:

http://img100.imageshack.us/img100/7173/4gbdg2.jpg

how much voltage are you using for vdimm, vmch and vfsb? what kind of cooling do you have for the ram? does it pass dual superpi 32M?
11-01-2006, 12:29 AM
over@locker886

Quote:

Originally Posted by maxtypezero

how much voltage are you using for vdimm, vmch and vfsb? what kind of cooling do you have for the ram? does it pass dual superpi 32M?

With 4GB ram not tested a lot, only superpi 1M. Other 2GB have friend..

I tested my sticks a lot in Asus P5W DW, and max 4-4-3-4 1070Mhz with one superpi 32m, and 4-4-4-4 1085Mhz, always 2,5v.
mch:1,73v
vfsb:1.5v
Cooling use: Aircooling with 12cm cooler, not use heatspreader.

First Subtimings should 3->6.
11-02-2006, 10:09 PM
eiceman

all these kits are made by D9GMH,isn't it?
11-03-2006, 01:41 AM
Quentin

My sticks :
2x1024Mo
SPI 1M :
525Mhz 4-4-4-12
Cas 5 sux : < ~530Mhz-535Mhz 5-5-5-12 or 5-6-6-18 :confused:
SPI 32M :
~505-510Mhz 4-4-4-12

E6600
P5WDH
Vdimm : 2.4v
Ratio : 1:2

I am disappointed :(
11-03-2006, 02:51 AM
over@locker886

Quote:

Originally Posted by eiceman

all these kits are made by D9GMH,isn't it?

Yes, all made D9GMH.
11-03-2006, 02:51 AM
over@locker886

Quote:

Originally Posted by Quentin

My sticks :
2x1024Mo
SPI 1M :
525Mhz 4-4-4-12
Cas 5 sux : < ~530Mhz-535Mhz 5-5-5-12 or 5-6-6-18 :confused:
SPI 32M :
~505-510Mhz 4-4-4-12

E6600
P5WDH
Vdimm : 2.4v
Ratio : 1:2

I am disappointed :(

What did you bios use?
11-03-2006, 03:07 AM
Quentin

1301, 1506
11-03-2006, 03:36 AM
over@locker886

Quote:

Originally Posted by Quentin

1301, 1506

I used 1407, try you this.
11-03-2006, 03:48 AM
Quentin

i will try but :rolleyes:
11-03-2006, 04:18 AM
Quentin

Same results :slap:
11-03-2006, 04:21 AM
ozzimark

Quote:

Originally Posted by Quentin

My sticks :
2x1024Mo
SPI 1M :
525Mhz 4-4-4-12
Cas 5 sux : < ~530Mhz-535Mhz 5-5-5-12 or 5-6-6-18 :confused:
SPI 32M :
~505-510Mhz 4-4-4-12

E6600
P5WDH
Vdimm : 2.4v
Ratio : 1:2

I am disappointed :(

if you don't get a significant gain from 4-4-4 to 5-5-5, then you are most likely mobo limited, sorry bro
11-03-2006, 04:32 AM
Quentin

I have got 570Mhz with 2x512Mo Teamgroup PC8000 Cas 5 with this mobo, but i will try a new mobo soon
11-03-2006, 04:40 AM
over@locker886

Quote:

Originally Posted by Quentin

Same results :slap:

:( Mch voltage?

Little, low score with this rams..:stick:

And same situation with mobo..

Superp 1M max:

4-4-4-8 on 1100Mhz
5-5-5-15 on 1115Mhz

Please show memset settings, we hope will to get extra mhz
11-03-2006, 04:45 AM
Quentin

Vmch : 1.5v->1.65 it's the same
11-03-2006, 04:51 AM
over@locker886

Quote:

Originally Posted by Quentin

Vmch : 1.5v->1.65 it's the same

:( Bad news. Please show us you memset settings!
11-03-2006, 05:55 AM
Quentin

Quote:

Originally Posted by over@locker886

:( Bad news. Please show us you memset settings!

http://img419.imageshack.us/img419/6480/memsetjj2.png
11-03-2006, 06:42 AM
SMa

Quote:

Originally Posted by Quentin

My sticks :
2x1024Mo
SPI 1M :
525Mhz 4-4-4-12
Cas 5 sux : < ~530Mhz-535Mhz 5-5-5-12 or 5-6-6-18 :confused:
SPI 32M :
~505-510Mhz 4-4-4-12

E6600
P5WDH
Vdimm : 2.4v
Ratio : 1:2

I am disappointed :(

My sticks (some other Team D9GMH) gain as much as yours when setting them at cas 5.
I've tested them on P5WD2 (P4 640) & P5B-E (E6700), both gave me simular results.

I assume that's normal for an Intel based platform.
11-03-2006, 08:36 AM
over@locker886

Quote:

Originally Posted by Quentin

http://img419.imageshack.us/img419/6480/memsetjj2.png

tRas change : 15
RMS change:15,6us
11-03-2006, 09:58 AM
Quentin

Quote:

Originally Posted by SMa

My sticks (some other Team D9GMH) gain as much as yours when setting them at cas 5.
I've tested them on P5WD2 (P4 640) & P5B-E (E6700), both gave me simular results.

I assume that's normal for an Intel based platform.

oh :(

deception.

i thought that teamgroup was good ram for overclocker
11-04-2006, 03:45 AM
Dekara

TeamXtreem on am2 dfi ultra-II
2x512mb 6400 CL4
I'll try more in few days.
sp32m@1000@4-4-4-10@2.35v.

http://img244.imageshack.us/img244/3...4102ik9.th.png

@ozzimark
Can you post here screenshot of other mem timings.
11-04-2006, 03:56 AM
dab420

1 Attachment(s)

http://valid.x86-secret.com/show_oc?id=135333

2.45V

Orthos Stable :woot:
11-04-2006, 04:21 AM
Quentin

Cas 5 ?
11-04-2006, 07:35 AM
ozzimark

Quote:

Originally Posted by Quentin

i thought that teamgroup was good ram for overclocker

all of my sticks have been, but if you're limited by your platform, well.. :(
11-15-2006, 01:36 AM
over@locker886

Quote:

Originally Posted by ozzimark

all of my sticks have been, but if you're limited by your platform, well.. :(

yeah..

I changed asus p5b-d mobo..
http://kepfeltoltes.hu/061115/1200_w...toltes.hu_.jpg