E6600 on P5W64-WS PRO at 4GHZ bootable !!!

Printable View

09-21-2006, 11:40 PM
camouflage

E6600 on P5W64-WS PRO at 4GHZ bootable !!!

:banana: This is bootable with WC setup - Vcore in BIOS 1.575. AI Booster shows 1.62 Vcore in Windows:

http://img133.imageshack.us/img133/3636/sp1m4005ue2.jpg

:woot:
09-22-2006, 12:49 AM
kiwi

Don't forget to mention which week is that :toast:
09-22-2006, 12:57 AM
[cTx]Philosophy

Verry niec, any mods done to the board?

Im looking for a good board thatll allow 500+ fsb modless..
My soldering skills are almost as bad as integrated video..
09-22-2006, 01:32 AM
camouflage

:D No mods - board & CPU "out-of-the-box".

Only replaced NB/SB thermal compound with AS5.

CPU is week 24.

:toast:
09-22-2006, 11:48 AM
vudoodoodoo

Holy crap. I might pull the trigger on Conroe. Been checking out and waiting for a good board. Now I just need a hacked Quad SLI driver.
09-22-2006, 12:01 PM
Wrangler88

is there any memory divider problems like the p5wdh has? or memory timing issues?
09-22-2006, 01:33 PM
syne_24

is this the $300 board one? Good results and nice vcore :toast:
09-22-2006, 01:40 PM
camouflage

Quote:

Originally Posted by Wrangler88

is there any memory divider problems like the p5wdh has? or memory timing issues?

:nono: No issues at all - running all dividers and no probs with the timings here...

@syne_24 :

Yes, it is exactly that fvcking expensive board.......... :slapass:
09-22-2006, 02:57 PM
theteamaqua

hmm, i was gonan get that then i found out that another person with L624A264 E6400 had fsb wall at 425fsb = 3.4GHz ... so basically my cpu is crap

plus this board is kinda expansive
09-22-2006, 07:21 PM
VAdept

Ordered. Lets see what it can do with an E6700 and some GSkill HZ...
09-22-2006, 08:30 PM
gersson

Quote:

Originally Posted by vudoodoodoo

Holy crap. I might pull the trigger on Conroe. Been checking out and waiting for a good board. Now I just need a hacked Quad SLI driver.

Not all CPUs are created equal! I could "only" OC my e6700 to 3.5 @ 1.55v ... should have gone with an e6600 :slapass:
09-22-2006, 10:11 PM
WeaponII

This board seems too good to be true. Would this be any more of a step from the P5W DH?
09-22-2006, 11:02 PM
fhpchris

Quote:

Originally Posted by gersson

Not all CPUs are created equal! I could "only" OC my e6700 to 3.5 @ 1.55v ... should have gone with an e6600 :slapass:

run 1.65v :)

3.5 @ 1.55v isnt horrible, 4ghz on 1.55v isnt happening anytime soon on air on E6600 retail.
09-22-2006, 11:06 PM
mouawad

Quote:

Originally Posted by WeaponII

This board seems too good to be true. Would this be any more of a step from the P5W DH?

well it looks like this board is good for 450+FSB out of the box so it's probably worth the price premium over the p5w dh in my eyes.

and it's workstation so you know it's going to be a strong mofo too.
09-24-2006, 01:34 AM
camouflage

:D Very stable board - no need to clock with clockgen. What is achievable is also bootable.........:clap:
09-24-2006, 07:49 AM
Simon

Quote:

Originally Posted by camouflage

Only replaced NB/SB thermal compound with AS5.

Are you using the boxed CPU cooler or a...?

I am looking for a Tuniq Tower 120, but it looks like it is impossible to find it here in Sweden.
09-24-2006, 07:59 AM
Anemone

Got mine, but no cpu yet :(
09-24-2006, 12:39 PM
camouflage

Quote:

Originally Posted by Anemone

Got mine, but no cpu yet :(

;) Take Your time - and catch an insane E6600 doing 3.6 at least. Do not buy any rubbish.

BTW right now some CELLSHOCK are on the way to me - maybe they love my 4GHz chip and the board even more than my CORSAIRs........:slap:
09-24-2006, 01:51 PM
Doumz

Lucky guy

I've got the cpu,ram,hdd,gfx in the mail last week
already have a psu
Still waiting for the p5wdg2-ws-pro board,these 2 really do look alike -_-
09-24-2006, 05:17 PM
Poodle

Quote:

Originally Posted by Simon

Are you using the boxed CPU cooler or a...?

I am looking for a Tuniq Tower 120, but it looks like it is impossible to find it here in Sweden.

I've had the Tower 120. Nice... But there are lots of nicer coolers out there.

I like build quality and effective engineering of thermalright and use the Hr-01. If you want maximum cooling the Ultra 120 is very nice with it's low weight. The Hr-05 is also a good performing/looking chipset cooler.
I've ordered home to old "Svedala" from PC-C without any problems and money left in my pocket. If you choose Hr-01 be sure to take the kit with the fan duct which you can't get here in the old country.

http://pc-cooling.de/en/COOLER/Intel...+Heatsink.html

Ok, Enough of offtopic...
09-24-2006, 11:01 PM
camouflage

Quote:

Originally Posted by Simon

Are you using the boxed CPU cooler or a...?

I am looking for a Tuniq Tower 120, but it looks like it is impossible to find it here in Sweden.

:eek: No no - CPU is on water, only use the stock NB/SB cooler.
09-25-2006, 02:36 AM
linflas

very nice, well done
09-25-2006, 03:30 AM
FrobinRobin

Quote:

Originally Posted by camouflage

:D No mods - board & CPU "out-of-the-box".

Only replaced NB/SB thermal compound with AS5.

CPU is week 24.

:toast:

I'm running MSI 975X P.E. Edition with a Week24 E6600 and I'm so very super duper glad that you got this O/C - it gives me hope to get a better O/C. :banana:

I found out today (some four weeks after getting my setup) that I need to put my dimms in one green and one orange slot. i.e. Channel A1 and Channel B1.... makes no sense to me.

but I'm hoping for a better O/C now, or when I get a better mobo.
09-25-2006, 07:03 AM
camouflage

Quote:

Originally Posted by FrobinRobin

I'm running MSI 975X P.E. Edition with a Week24 E6600 and I'm so very super duper glad that you got this O/C - it gives me hope to get a better O/C. :banana:

I found out today (some four weeks after getting my setup) that I need to put my dimms in one green and one orange slot. i.e. Channel A1 and Channel B1.... makes no sense to me.

but I'm hoping for a better O/C now, or when I get a better mobo.

:rolleyes: This might be the right decision..........;)
09-25-2006, 07:46 AM
vudoodoodoo

Just ordered this mobo and E6600 from ZZF. Can't wait!
Actually I have to. Gotta wait on Tank Guys. :(
09-27-2006, 02:56 AM
camouflage

Quote:

Originally Posted by vudoodoodoo

Just ordered this mobo and E6600 from ZZF. Can't wait!
Actually I have to. Gotta wait on Tank Guys. :(

:confused: Update? I just received my CELLSHOCK DDR2-1000....

Sry for :off:
10-04-2006, 12:41 AM
Simon

Quote:

Originally Posted by Poodle

If you want maximum cooling the Ultra 120 is very nice with it's low weight...

Thanks for the tip!

I just ordered an Ultra 120. Do you have a fan to suggest?
And I also appreciate any idea in what direction to mount the Ultra 120.
My board is mounted like this:

http://max.ownit.nu/Board90.png
10-04-2006, 01:32 AM
Mykou

I've already tried p5w DG2 WS pro and did'nt find it superior to p5W DH ( at least with my chip )

Doess the p5w64 offers more than DG2 WS pro ?
10-04-2006, 03:09 AM
camouflage

Quote:

Originally Posted by Mykou

I've already tried p5w DG2 WS pro and did'nt find it superior to p5W DH ( at least with my chip )

Doess the p5w64 offers more than DG2 WS pro ?

:D I think it does, still bootable:

http://img355.imageshack.us/img355/1...1m12562sv4.jpg

Easy Vdimm pencil mod - now I have max. 2.8 volts. This is done with 2.66 Vdimm :hehe: .

:toast:
10-04-2006, 03:21 AM
Spacemaster

Please ansver me.:confused:

http://www.fotorola.com/uploads/b19d5967f1.jpg
10-04-2006, 03:37 AM
Durzel

Probably about 1.5675v
10-04-2006, 04:17 AM
bubu..

this mobo give +0,05volt in bios..... :D :D

exactly you set 1,55volt in bios, real is 1,60volt.... this mobo drop in positive 0.01volt :D it becomes 1.61v under load :D :D :banana:

this is the best mobo 975....for asus :banana:
10-04-2006, 04:27 AM
Durzel

I'm not so sure about that...

If I set 1.4750v in the BIOS I see at least 1.53v in PC Probe at idle, but it vdroops to about 1.49v at full load. It's more accurate to say that the board maintains the vCore you set in the BIOS at load, but at idle it's easily 0.5v more.
10-04-2006, 08:14 AM
camouflage

:D Sorry for late anwering but different time zone here:p: - the 4,014MHz SP1M is done with 1.585 Vcore in BIOS.

:toast:
10-04-2006, 08:27 AM
charlie

Quote:

Originally Posted by Simon

Thanks for the tip!

I just ordered an Ultra 120. Do you have a fan to suggest?
And I also appreciate any idea in what direction to mount the Ultra 120.
My board is mounted like this:

http://max.ownit.nu/Board90.png

Try the fan on the bottom, airflow upwards into PSU intake... or fan on the right, airflow towards rear.
10-04-2006, 08:48 AM
Blacklash

Nice results! Good board, and the AW9D-Max will boot @ 4.0GHz too out of the box, no mods:

CPU Type: E6600
Clock SPeed: 4005MHz
Stepping: 6 B2
Week: L629
Code: A438
Vcore Set in bios: 1.65v

Cooling: Air
Cooler brand/model: Scythe Ninja Plus

Motherboard: Abit AW9D-Max w/2.00 Mch
Bios Version: 12
Memory: Muskin
Rated speed: 6400
Timmings: 5-5-5-15

http://img85.imageshack.us/img85/8990/e66004ghziy4.jpg

http://valid.x86-secret.com/show_oc?id=125924

http://img85.imageshack.us/img85/688...rpi4ghzxj1.jpg
10-04-2006, 11:27 AM
Mykou

Nice chip too Malficar , we're close for superpi 1M ;) did you try less Vcore ?
10-04-2006, 01:10 PM
camouflage

:D For all of You using CELLSHOCK 1000 RAM (C4) on this board, try this 1:1:

http://img505.imageshack.us/img505/7...set3331lk1.jpg

400MHz = ~ 2.3 Vdimm up to 450MHz = ~ 2.7 Vdimm ;)

:toast:

All times are GMT -8. The time now is 01:09 AM.

XtremeSystems