Vision SingleStage by Johann

Printable View

09-20-2006, 09:41 PM
johann

Vision SingleStage by Johann

My customer Raju contacted me with something special in mind so this unit I gathered only the best components I could find and got my good friend Dimas to make the case.

Specs:

Compressor: Danfoss NL11F
Condensor: Rifle tubing high performance from Placebo
Refrigerant: R402a
Cappilary: 2.7m 0.031"
Evap: @itor with acrylic kit
Controller: Gfroster XE 1.6

Temps:

Idle: -60c
150w constant: -45c
200w constant: -40c

@itor evap:

http://emerald.srv2.com/~sokkiesc/Fo...r/IMG_0261.jpg

http://emerald.srv2.com/~sokkiesc/Fo...r/IMG_0264.jpg

http://emerald.srv2.com/~sokkiesc/Fo...u/IMG_0463.jpg

DimasTech case with window. It is 590mm deep instead of the usual 490mm to fit under Lain Li PC70 case.

http://emerald.srv2.com/~sokkiesc/Fo...ase_before.jpg

Plexiglass panel with 2 x LCD's. Will measure Condensor in/out temp. The panel will sit behind the Window panel

http://emerald.srv2.com/~sokkiesc/Fo.../Raju/LCD2.jpg

Power box, contains 15v ac transformer for Gfroster, 5v DC for LCD's and Gfroster power module:

http://emerald.srv2.com/~sokkiesc/Fo...wer%20box2.jpg

http://emerald.srv2.com/~sokkiesc/Fo...ower%20box.jpg

Some shots of unit:

http://emerald.srv2.com/~sokkiesc/Fo...aju_Idling.jpg

http://emerald.srv2.com/~sokkiesc/Fo...%20closeup.jpg

http://emerald.srv2.com/~sokkiesc/Fo...%20running.jpg

http://emerald.srv2.com/~sokkiesc/Fo...aju_window.jpg

http://emerald.srv2.com/~sokkiesc/Fo...ju_back_on.jpg

LED's in enclosure :D

http://emerald.srv2.com/~sokkiesc/Fo...u/IMG_0518.jpg

http://emerald.srv2.com/~sokkiesc/Fo...u/IMG_0521.jpg
09-21-2006, 03:12 AM
LowRun

Looks like it will be another nice one from you :cool:
09-21-2006, 12:39 PM
pazza316

Nice case and Evap mate!!

Good start!
09-21-2006, 12:53 PM
Marvin

looks great, as usual.
09-21-2006, 03:09 PM
4Qman

The encolsure is superb.
09-22-2006, 07:41 AM
Brettbeck

Great start!

That encolsure would look even better if it had some LEDs in there :D!
09-22-2006, 08:14 PM
Raja@ASUS

yeah we're gonna stick some leds in there, probably red to go with the case...
should be great..

regards
Raja
09-23-2006, 01:38 AM
mykeos

me likes that plexi thing;)
09-23-2006, 05:16 AM
johann

Added little plexiglass LCD bracket in 1st post.. It will be mounted behind then window panel and monitor condensor in/out temps :D
10-04-2006, 12:57 AM
johann

1st post updated with pics of virtually done unit. All that needs to be done is LEDs inside enclosure
10-04-2006, 01:51 AM
Holst

Looks absolutely superb, and very good performance with it.

Lets hope he can get some great clocks with his new toy :D
10-04-2006, 02:14 AM
johann

Quote:

Originally Posted by Holst

Looks absolutely superb, and very good performance with it.

Lets hope he can get some great clocks with his new toy :D

Thanks Holst, Raju will be bringing his machine over here on Saturday so we can have a bit of playtime and testing on his conroe
10-04-2006, 02:27 AM
rapty

Very Clean unit I like the LED's on the side

When can my Unit be sent to be modded by you Johann :D
10-04-2006, 02:38 AM
Athens[2004]

Very Nice the only observation is for those ? aluminum ? screws , i think if u replace them with black screws the whole unit will look's more beautiful
10-04-2006, 02:41 AM
johann

Quote:

Originally Posted by rapty

Very Clean unit I like the LED's on the side

When can my Unit be sent to be modded by you Johann :D

PM me what you decided on Rapty and we go from there. The NL11F will proppably be here in a week from now.

Athens, that is a good idea. Raju will make the decision. It is his unit :)
10-04-2006, 01:03 PM
pazza316

Nice unit mate!!

Looks great! and good temps!
10-04-2006, 01:13 PM
Brettbeck

Looks great:)! Are you going to put any LEDs in the enclosure?
10-04-2006, 02:04 PM
Pete

Amazing, wish i had my rig back many months on now!
10-06-2006, 10:35 PM
Raja@ASUS

I'll be setting up and testing next week, on the Abit Awd9 Max...

After testing the board will go to Johann, he can bench with it further...

The phase unit should be something real special, my E6600 can already hit superpi 1m at 4ghz with 1.54 vcore on water. On phase who knows, ultimatley I trhink I'll hit an fsb wall onthe 975 chipset. I'm awaiting DFI's new board....

regards
Raja
10-07-2006, 09:57 AM
Unseen

very nice unit johan. Great work :)
10-08-2006, 10:38 PM
johann

Thanks Unseen :D
10-09-2006, 03:50 AM
LukeXE

Great, great, great Johann ! I like your units, they are powerfull and very clean :)
10-09-2006, 05:07 AM
johann

Quote:

Originally Posted by SoddemFX

Realy nice Johann, your customer will be very happy :)

On a side note, those little LCD thermometers are pretty good value for money. They only go a little off when you get down to low temps, for a condensor theyre grand. The blue backlight behind the large black characters looks damned sexy too! :D

Top notch work and attention to detail.

Tom

Thanks Tom and Luke! Sure the lcd's are great. They look fine and when not monitoring evap temps or sub zero temp works quite good. I found at around -40c they are about 5-7c off but at above 0 they seem pretty close
10-09-2006, 07:34 AM
Ssilencer

Looks excellent!
I want to see it with the leds and mounted over his conroe!
10-09-2006, 07:38 AM
Messiah Khan

Don't you dare mount LEDs in it! I want mine to be the first of the see through enclosures with mounted LEDs.:( :p: Hold it off a few month until Gray gets mine sorted will you please.

Great work by the way. Very neat and tidy.
10-09-2006, 07:40 AM
Blaster

yes, it looks great

good job m8 :)
10-09-2006, 11:07 AM
Weee

Well, I don't read here much anymore, but I really like this one, so I thought I'd give you a positive comment! Very cool, very neat, I like the look overall =)
10-11-2006, 09:03 AM
johann

LED's in enclosure :D

http://emerald.srv2.com/~sokkiesc/Fo...u/IMG_0518.jpg

http://emerald.srv2.com/~sokkiesc/Fo...u/IMG_0521.jpg
10-11-2006, 09:05 AM
aasmaukr

Ooh nice :p: Looks very good.
10-11-2006, 10:07 AM
Brettbeck

Yea that looks really nice :)!
10-11-2006, 10:19 AM
Raja@ASUS

yeah he really nailed it right through the build, should be here by the weekend, so I gotta learn fast how to insulate these cap riddled 975 boards....

regards
Raja
10-11-2006, 11:04 AM
Ssilencer

Oh, I thought you be pouting the leds in the base, but looks nice anyway!
10-11-2006, 11:41 AM
Raja@ASUS

Quote:

Originally Posted by Ssilencer

Oh, I thought you be pouting the leds in the base, but looks nice anyway!

it's the business, could not have hoped for a better unit, I wish I had an x6800 like yours now....

Maybe opb can be convinced to part with that 5.5ghz beast he's playing with, though I doubt it...

regards
Raja
10-11-2006, 06:18 PM
Marvin

perfecto.:D
10-11-2006, 10:15 PM
Gray Mole

That head looks stunning with LED's, I knew it would :D

Can't wait for mine to arrive, 4 white LED's planned for that one for Mr. Khan :woot:

All in all, the usual top quality work we have come to expect :toast:

Gray
10-11-2006, 10:49 PM
johann

Quote:

Originally Posted by Gray Mole

That head looks stunning with LED's, I knew it would :D

Can't wait for mine to arrive, 4 white LED's planned for that one for Mr. Khan :woot:

All in all, the usual top quality work we have come to expect :toast:

Gray

Cheers Gray, I have had problem in my foot making me pretty much static but I have asked my fiance to ship you evap today so you shall receive it tomorrow.
10-12-2006, 12:06 AM
Gray Mole

Dam, you with a bad foot, me with a bad hand :p:

Shame we can't work together, would almost have a whole person :D

No biggie, I can't build it til my hand heals, but I DO need to know it's shape to be sure about how it will work for Mr. Khan.

Well, that and I want some time to drool on it before I have to send it away :slobber: hehe

If it looks as nice as your build when it's done I'll be pretty happy with it :)

Gray
10-12-2006, 12:12 AM
johann

Yeah you wont believe Gray, I got something in my foot no one of my age should have (27) Its some form of crystals in the joint, extreme pain. Apparently caused by Acidy stuff and alcohol but the weird thing is I dont drink much beer atall. Id have 3 or 4 pints on Poker nigth but thats about it.

Today the swelling seems down for the first time so hope its all better soon.
10-12-2006, 12:36 AM
jinu117

Disabled guys. At least glad to see both of you being around :)
Give me a holler when you can :)
10-12-2006, 05:40 AM
Messiah Khan

Its called gout isn't it Johann? Not nice at all. Whats with all you phase builders falling apart? As Gray says, maybe you should use all your working bits to make a frankenstein builder.:p: I was just thinking(I appoligise for thinking aloud) but would a tricolour LED work in the enclosure? That way you could change the colout theme witout having to mod the enclosure again? On a similar note, can you get tricolour LEDs that go to white?
10-13-2006, 02:13 AM
johann

Quote:

Originally Posted by Messiah Khan

Its called gout isn't it Johann? Not nice at all. Whats with all you phase builders falling apart? As Gray says, maybe you should use all your working bits to make a frankenstein builder.:p: I was just thinking(I appoligise for thinking aloud) but would a tricolour LED work in the enclosure? That way you could change the colout theme witout having to mod the enclosure again? On a similar note, can you get tricolour LEDs that go to white?

Yeah thats what its called but I prefer to not call it that, my grandfather had it cronically. Yeah me and Gray had a laugh this morning, we decided he will carry me around on his back. His legs are fine and my hands are fine, with two brains we will produce some wicked phase units :D

As for the led's, thats a good idea for sure but to be honest I never really looked into multicolored LED's because we decided on the red theme from the beginning.

You do get white led's so Im sure you get some multicolored ones with white as one of the colors.
10-21-2006, 09:16 AM
Raja@ASUS

installed!!!, unfortunatley the only working mobo I have is the fsb limited Infinity..

excuse the somewhat fuzzy pics, my camera is not very good.

http://img309.imageshack.us/img309/7600/unit2004kh8.jpg

http://img198.imageshack.us/img198/5523/p1260016hl0.jpg

In any case with 1.6 vcore (bios) and dual orthos running at 380fsb (about the limit of this mobo on the older beta bios) temps are never lower than -44 on the evap under full Orthos dual blend test load, great temp I think. Unforunatley there is no software that shows an accurate reading in XP. Idle at this vcore (1.6) in xp is around -52 degrees.

http://img191.imageshack.us/img191/2752/unit3002nk1.jpg

I am going to leave Orthos running for a few hours to let the heat fully test the unit.. After 20 mins we are at -44 with 1.6vcore full load..

regards
Raja
10-21-2006, 09:26 AM
LittleDevil

It looks really nice, mybe little too long flex but no problem ;)

What kind of CPU do you have?

thanks
10-21-2006, 09:40 AM
Dimas

good performance, and good mount of that system;)
10-21-2006, 09:49 AM
Raja@ASUS

HI Guys

Conroe E6600, Johann left it long so I could bench with the unit too and also to allow a little flexibilty for other cases. Nealry 1 hour now of Orhtos dual blend test and still -45 on evap at 1.6vcore!

regards
Raja
10-21-2006, 11:17 AM
johann

Fan speed low? -45c?

Your system as a whole looks incredible Raju :D
10-21-2006, 11:45 AM
Raja@ASUS

yeah man it's on low, I have not changed any settings on the froster, I have not even connected the froster to the seriel header on the mobo. I assume that's how I would change to high?

regards
Raja....
10-21-2006, 12:11 PM
johann

That would be around 45-55cfm on the condensor, excellent :D

Get some screenies!
10-21-2006, 12:18 PM
Cupcake

now about how much would one of those cost me if i gave you a mach II to work with ??
10-21-2006, 12:43 PM
Raja@ASUS

ok work in progress, downloaded xe 1.6 software and set fans to high, running Orthos now....
temp offset is at zero, I assume that's where it should be?

regards
Raja
10-21-2006, 07:50 PM
Raja@ASUS

unit holds great temps overnight with Orthos

http://img152.imageshack.us/img152/9499/5hrsis0.jpg

1.6vcore shows 1.56 in xp..

Will try dual super pi next..
10-21-2006, 07:57 PM
Raja@ASUS

idle

http://img244.imageshack.us/img244/9511/idleku4.jpg
10-21-2006, 08:14 PM
Raja@ASUS

under dual superpi load..

http://img120.imageshack.us/img120/3...pitempsdu7.jpg
10-22-2006, 02:32 AM
LittleDevil

Great, what about if you try to put more voltage on your CPU and FSB for example 400?

Are you using dielectric gerase?

thanks?
10-22-2006, 02:43 AM
Raja@ASUS

Quote:

Originally Posted by LittleDevil

Great, what about if you try to put more voltage on your CPU and FSB for example 400?

Are you using dielectric gerase?

thanks?

Unfortunatley this mobo is limited to 385fsb regardless of voltage.

I did have a brief run with the Asus P5WDG2 Pro before I killed the mobo,

temps were -45 on load at 4ghz and 1.6vcore. Here's a screenshot, ignore the time change in Orthos as I used microsoft time update server during the 4hour run, as can be seen on the screenshot.

I think the temps are excellent really for Conroe which seems to make most stock units struggle when at 1.6v and over.

http://img148.imageshack.us/img148/710/4hoursgj0.jpg

I am using dialectric grease..

regards
Raja
10-22-2006, 04:07 AM
kayl

Quote:

Originally Posted by raju

installed!!!, unfortunatley the only working mobo I have is the fsb limited Infinity..
excuse the somewhat fuzzy pics, my camera is not very good.
In any case with 1.6 vcore (bios) and dual orthos running at 380fsb (about the limit of this mobo on the older beta bios) temps are never lower than -44 on the evap under full Orthos dual blend test load, great temp I think. Unforunatley there is no software that shows an accurate reading in XP. Idle at this vcore (1.6) in xp is around -52 degrees.
I am going to leave Orthos running for a few hours to let the heat fully test the unit.. After 20 mins we are at -44 with 1.6vcore full load..
regards
Raja

thats was quick getting that unit out johann :toast:
the DFI Infinity suck with their FSB limit, one of my customers was stuck at 377 i think on air, then even with phase no difference and water cooling on NB not 1fsb more, he only had a E6400 though.
i know i tune all my units with 1.7v bios, first turn on is the hardest part on the cooler.
10-22-2006, 04:15 AM
Raja@ASUS

Quote:

Originally Posted by kayl

thats was quick getting that unit out johann :toast:
the limited Infinity suck with their FSB limit, one of my customers was stuck at 377 i think on air, then even with phase no difference and water cooling on NB not 1fsb more, he only had a E6400 thought.
i know i tune all my units with 1.7v bios, first turn on is the hardest part on the cooler.

yeah bro' I know this board inside out, it's just a stop gap while I await the new DFI boards. The Asus PRO had an fsb wall off 445 out of bios, and the cpu and unit creamed all of that without sweat. I WIl update this thread when I get a real decent board that can manage 500fsb, I don't want to commit to anything just yet considering the DFI RD 600 should be here soon.

regards
Raja
10-25-2006, 09:16 AM
Raja@ASUS

ok so I set the vcore to 1.71v in bios, to see what this unit can really do with some heat from my e6600...

work in progress....

http://img114.imageshack.us/img114/8...thos29mpi0.jpg
10-25-2006, 10:11 AM
Raja@ASUS

after 1hr21 still nice temps

http://img87.imageshack.us/img87/407/1hr21tn2.jpg
10-25-2006, 10:24 AM
Raja@ASUS

idle before dual superpi 32m

http://img68.imageshack.us/img68/8549/idle171uo8.jpg
10-25-2006, 10:37 AM
Raja@ASUS

during dual superpi32m

http://img74.imageshack.us/img74/821...emps171os7.jpg
10-25-2006, 11:40 AM
krullet

omg sooooo nice, i want that i really want it fu*king amazing
10-27-2006, 12:22 AM
johann

Quote:

Originally Posted by krullet

omg sooooo nice, i want that i really want it fu*king amazing

Thanks man, Im really happy with this machine. It has never seen less than -42c ever which for me is amazing temp to hold.
11-02-2006, 10:04 AM
Revv23

Very well built and sexy unit.
11-02-2006, 10:53 AM
Raja@ASUS

with the new fan speed settings in the froster 2.7 software, temp is even better by one degree at idle -57 (1.4vcore idle) and -51 (1.71 vcore idle) and under load. -44 ~ -43 with 1.71 vcore (1.66 under dual orthos load), which is incredible!

thanks to johann and Ssilencer for all the support!

regards
Raja
11-02-2006, 12:29 PM
LukeXE

Amazing unit, congrats raju, Johann is great builder and it was good idea to take SS from him :toast: Temperatures are just...insane, one of the best SS I ever seen
11-02-2006, 12:41 PM
Ssilencer

Quote:

Originally Posted by raju

with the new fan speed settings in the froster 2.7 software, temp is even better by one degree at idle -57 and under load. -44 ~ -43 with 1.71 vcore (1.66 under dual orthos load), which is incredible!

thanks to johann and Ssilencer for all the support!

regards
Raja

Enjoy your state of the art unit man :cool:
11-02-2006, 11:54 PM
johann

Quote:

Originally Posted by LukeXE

Amazing unit, congrats raju, Johann is great builder and it was good idea to take SS from him :toast: Temperatures are just...insane, one of the best SS I ever seen

Hey thats my baby, Im glad she is running that nice. :D
03-16-2007, 12:26 PM
stormcloud

Awsome work I love that case:D

All times are GMT -8. The time now is 02:47 AM.

XtremeSystems