Printable View
here are some photos of my finished system
Asus P5WDG2-WS PRO
Conroe X6800
Corsiar Twin2 x 2048-8500C5
Jinu V2000B Single Stage Phase Cooler & Case
G-Froster 1.5XE Controller and Display
Enermax Liberty 620 PS
2 X BFG Geforce 7900GTX 512MB Video Cards In SLI with Modded Drivers
2 WD Raptors 150GB In RAID 0
1 200GB WD SATA Backup HD
2 Dual Layer DVD Burners
Floppy Drive
330 x 13 @ 1.54vcore = 4290mhz
My Cables are always a mess--- its my trademark :)
Lee
next
next2
next3
nextfinal
nice, im sure your loving it=)
how loud is that setup and is there alot of heat dump into the room???
loud no.... heat dump yes :)
Lee
its loud to me, dont know if we have the same fans or not. compressor not loud, fan loud to me. Where i live is very quiet.
i have kids 1 month old and a 5 year old... nothing is loud by comparrison :)
Lee
Excellent rig Lee, and also nice 24/7 speed.
I'm waiting a x6800 for a V2000 we are making here, it does 4gh on air, so I hope we can get at least the same 24/7 speed.
Also he has a pair of 7900gtx that will be on watercooling, no problems with the sli over the p5w?
I hope you enjoy the controller also ;)
1) any info you can provide on that side cooling fan for the VCs would be nice.
2) evap idle temps? (with voltage/freq) pls
3) why does the PSU look so small? what is it?
4) go with rounded cables on your drives!
-FCG
Ssilencer, the controller is working great thanks for version 1.6 its a huge help.
Ive just finished a marathon oblivion gamming session and sli with the asus board is working great so far. I liked my temps on my video cards better when i had them on water but water is just such a pain in the ass everytime you want to work on your system. after playing oblivion on ultra high mode at 1920 x 1280 my primary card was at 77c my second card was at 67c. the space between the cards is so tight theres just no place for the primary card to draw its air from. but even at those temps and a mild overclock of video cards they worked like a charm. Man the system is quick, i think your gona love it.
Freecableguy, The Side fans for the video cards comes from lian li case company. They come with the v1000b plus case but im sure you can buy them direct from the company, This is a Jinu custom built SS Phase so it rocks. evap idle temps are at -45c ive been running at 2 different speeds and voltages both rock solid stable, 330 x 13 =4290mhz @ 1.54v vcore and
330 x 12 =3960mhz @ 1.41v vcore (those are the asus probe II numbers the bios reports them as 1.48v and 1.35v respectivley). The powersupply is an enermax liberty 620 so far i own 3 of them and they seem to work well. I will look at ordering some rounded cables for the drives :). Ive had the fsb up to 365mhz but i had to raise the vmch to get there and higher and i have no real cooling to speak of on the chipsets so i settled for a lower fsb and using the multiplier.
Hope i answered everyones questions
and thanks for all the post
Lee
P.S. Silencer i havent even tried higher than 4300mhz theres really no telling how fast these things will run on a SS. Im thinking 2 or 300 more mhz might not be out of the question if you wanted to feed it enough voltage. but ive had such bad luck with the cold bugged fx-62 and been without a gaming system for soooo long i just dont want to risk it right now :) after the new wears off ill give it a push and see what kind of stable numbers we can reach.. im also kind of waiting for a program that will let me know what my cpu temp is in windows NOTHING works on this mohterboard on subzero numbers. the only place i can read my cpu temp is in the bios monitor screen. :(
Lee
Hey i really like your system... In the future i will buy V2000 too, but it's soo expensive here in europe/Slovenia.
Can you tell me what temps do you have on load 330 x 13 =4290mhz @ 1.54v vcore?
thanks
Really nice system u got there
Looks like $4000 well spent to me :clap:
Nice system Lee!
I'm sure you'll neaten up things after some play time.
Nice build Jinu!
Phase layout real well done & tidy, great temps for SS and all fits in one case! LET THE GAMES BEGIN!!!
i think those cases are expensive everywhere, they are a very nice case though.Quote:
Originally Posted by LittleDevil
Nice system there Lee.:toast:
where do you keep the PSU for the Pc?
Littledevil i can only tell you evap temps under load and they cycle between -38 and -33c as i said in a previous post there is no program out there that will let me monitor subzero temps in windows and ive tried them all.
coretemp, intel temp monitor, everest, speedfan, mbm, asus probe II. none of them work so i cant give you cpu temps sorry.
Kayl If you look at the 3rd picture the bottom 1/3 of the system (compressor section) at the back of the case right below the silver alum. divider you will see a black SHINY box there are reflection of the window blinds in the shiny black paint. thats the enermax liberty 620 powersupply.
The Rest of you guys THANKS a TON for your VERY nice Replys.
Lee
Any of the temp probe bay devices show miuns temps, assuming a mounting place could be found?
Great looking setup! Makes me almost want a case again. :D
i guess i could strart searching for temp probe system, i was kinda hoping that this being a new motherboard with a new winbond chipset that given some time speedfan (or someone else) would write an upgrade that would give me an idea without having to go to all that trouble. I think i have a good airtight seal around the evap. right now so im reluctant to remove it to mount a temp probe :).
but yea if give some time no one upgrades their software i will have to do soemthing.
Lee
Iross78550 You are impressive indeed
Please, tell us how did you find the performance of the
Corsair XMS2 TWIN2X2048-8500C5 with the ASUS P5WDG2 WS Pro?
Thanks a mill$$$$$$on
Quote:
Originally Posted by lross78550
Excellent man, I'm really happy for you and that precious rig (I feel like Gollum, give my my precious!!!!)
And yes, definitelly time to give it a use, 4300mhz in not too shaby!, maybe when it gets a litle wears off (in about a week, hehe) you can play some suicides spi's etc.
I hope we can get our x6800 soon enough (got it from OPB, a really nice cherry picked one) so we can finish this building and make some runs. We have to choose yet what mobo to get for the 7900gtx sli, that one looks great, but it is also the most expensive one.
Again, congratz on you excellent rig!
Quote:
Originally Posted by lross78550
MBM5 with an asus p4/800 profile is showing minus temps on my vapo LS. Not usre how accurate they are, but in the minus 30's. coretemp and TAT show 2 deg.
Im not the person to ask this question its working great at 345mhz 1:1 at 4-4-4-12 but i dont really understand the whole intel fsb speed, memory ratio, equals cpu speed. I dont know which settings provide the best performance and havent taken the time to find out..i can say that as long as i keep the timmings in line with the memory speed it works perfectly. i.e. ddr2-800 or less 4-4-4-12 ddr2-800 or more 5-5-5-15. sorry i cant be more helpfull.
Thanks
Lee
Quote:
Originally Posted by anani
xgman you ROCK it works i have a way of reading my cpu temp in windows.
I will send one of my female employees to offer you sexual favors just let me know what city :) Thanks a ton man i was really missing that ability
Thanks
Lee
Quote:
Originally Posted by xgman
Quote:
Originally Posted by lross78550
lol, love it. :D Not only that but if you use the logitech g15 keyboard, it reads the mbm temp, cpu speed and nb temp among other things on the little lcd display.
Send me the girl and I'll send you the g15. :D