Printable View
I had the possibility to play around with 3 Palit/Xpertvision 7300GT 2ns Ram DDR3 cards yesterday and those are the results.
I know they are not that great, but they are not modded yet.
Thats 01 and 03 class record, but nowhere near Stilt's 05 score.
A big thank to Big_Sam for the great drivers.
2001:
http://service.futuremark.com/compare?2k1=9032794
2003:
http://service.futuremark.com/compare?2k3=4926844
Nice scores :D
I also made a quick 06 testrun:
http://service.futuremark.com/compare?3dm06=451344
I am more than happy with those cheap cards :D
your conroe really give those cards a nice boost :D
Wish i could get some 7300gt 256 gddr3 in the USA.. newegg's is 128mb =/
Very nice scoring :toast: Matches the top score for the 7600GS :D
When you say the memory is 777Mhz is that effective or actual, ie 2ns memory is 500/1000 normally so either you have a massive overclock or an underclock. I cannot work out which. Probably the overclock ?
Also you say Single 1GB RAM for the motherboard, does this mean 2 x 512 ?
Are the 85's better than the 84 drivers ?
These 7300GT cards are turning out to be like the old 6600GT, seem to be great to bench......
Regards
Andy
those 2ns memories are insane, mine do easily 810 in sli.
Quote:
Originally Posted by massman
810 or 1620???? couldnt be 1620 could it???
1620Mhz.
One of my cards has "bad" ram and only does 777Mhz, so I am limited to 592/1554 for 24/7 use, which is still quite good for a 500/1000 card :)
Edit: Just say zakelwe's post.
With 777Mhz I mean real Mhz, 1554Mhz "optimal".
I am using a single 1024MB stick. Trying to get another stick, but cant find them in Europe :/
I am using the 85.96 mod drivers by Big_Sam, because there are no "official2 SLi drivers for Intel chipsets out yet.
They are not only good for benching. I have been playing Call of Duty 2 and Serious Sam2 in 1024*768 everything set to max and it ran almost perfect with a single crd. In SLi it couldnt be any better.
I have had a 2700Mhz Opteron 165 and a 7800GT @ 481/1101 before and the 7300GT SLi setup feels at least as fast as that config.
More pictures of te card and more screenshots can be found on this german oc forum:
http://www.forumdeluxx.de/forum/show...232579&page=15
I will upload more sreenshots tomorrow.
Thanks for the info .. looks like no speed binning on Samsung now I think ... :woot:
I've ordered some 7300GT's myself .. this action is too good to miss. Hopefully I will get on the first page by Christmas and the ambients are lower :)
Regards
Andy
nice scores
I'll give you some competition mate, sli dice containers are ordered :DQuote:
Originally Posted by zakelwe
Considering I'll be air cooled looks like the competition might be too tough for me. I've got some of those Galaxies on order with the nice Zalmann heatsinks so at least they should be good on air.Quote:
Originally Posted by massman
Fr3ak has set a good benchmark on 2001 , team MXS and Big Sam on the others plus some guy called massman on 06.
If I can get Dr Jay to buy a couple I think we might be ready to rumble ....
Jay, you gonna bite ? I bet he's too busy frapping around with X1600 at the moment I fear ... :rolleyes: :D
Regards
Andy
nice scores !!
I cant believe it goes so high with C2D :slobber:
7300GT in sli is really effective ... at least in 3Dmark, could you try some quake4, fear or something if the SLI can perform that good also in games?
BTW, thse mems are insane, holy clocks for 2ns binned :cool:
In the other 7300gt thread, you'll find my Prey-benches (on a x2 @ 2.2Ghz.).Quote:
Originally Posted by Aerosupra
Well I dont have Quake 4 and I dont own Fear eitehr :/
I have Call of Duty 2 nd Serious Sam 2. Dunno if there is a timedemo or something similar, but those games are performing damn nice with SLi. Even with single card, they performed better than I imagined. Only a few slowdowns every now and then.
Those are all the 3D Mark benches:
http://service.futuremark.com/compare?2k1=9032794
http://service.futuremark.com/compare?2k3=4926844
http://service.futuremark.com/compare?3dm05=2175324
http://service.futuremark.com/compare?3dm06=451344
I ran Aquamark with 3600mhz and got 151k. Dunno if thats good or not.
maybe a group buy? it would be really nice since you cannot get these in the USA!!!!!
I got 91k at 550/805 with a x2 @ 220x10, so it's quite good, but it could better.Quote:
Originally Posted by Fr3ak
:eek: while I was not impressed by this cards in single runs, I do now :slobber: thoose results in sli ^^ not sure if it's mainly the conroe but that would be a cheap, nice sli for my s939 :slobber:
There are more results and pics at Hardwareluxx in the 7300Gt thread:
http://www.forumdeluxx.de/forum/show...232579&page=15 and the following 2 pages.
Will improve those SLi score tomorrow even more ;)
Some SLi results, before I blow everything up:
2001:
http://ftp.tnib.de/pub/team-coca/mem...5(747)_800.JPG
2003:
http://ftp.tnib.de/pub/team-coca/mem...7(729)_800.JPG
2005:
http://ftp.tnib.de/pub/team-coca/mem...5(727)_800.JPG
2006:
http://ftp.tnib.de/pub/team-coca/mem...5(727)_800.JPG
Aquamark3:
http://ftp.tnib.de/pub/team-coca/mem...%203946Mhz.JPG
I really need another stick of ram to get higher scores. Maybe I can get into the 60k and 30k with a bit finetuning
Excellent scoring Fr3ak ... :toast: so close to 60k. You really really need to go out and buy that other stick of RAM, I'm sure you are being held back by a lot.
Regards
Andy
Finally you did real big scores Fr3ak, congrats! :D
I'm still testing pair of Palit 7300GT Sonic 256Mb on Opteron and crappy unmodded Asus A8N-SLI SE (chipset of my DFI board damaged by water-condensation now so I can use PCI-E slots only in 8x/2x-mode). On A8N-SLI SE I got the same scores with SLI-bridge and without SLI-bridge, don't know WTF... :confused: Tried different drivers, SLI-bridge directions, swapping the cards in mobo slots... nothing changed :-(
Currently at 12277 in 3DM05 and 5761 in 3DM06.
Doh, it was way too early in the morning last nightm so forgot something I was gonna menation.
Thnaks a lot to S_A_V and Big_Sam. Wouldnt have found the right pins for the vmods without them.
I am sure another stick of ram will help me a bit, but they aint available anywhere in Europe, so I have to order one from Newegg. They were 120$ a while ago and now they are at 140$ :/
I guess they wont be cheaper than that for quite some time.
Maybe S_A_V you are limited by that 2x slot.
The 01 score isnt final yet. I was able to bench the low benches at 900Mhz with both cards, but I had to decreaseclocks a lot. I wasnt able to bench at the max speed I figuered out days ago for some reason.
But before I up the volts a lot more, I need better cooling. I finally decided to complete my watercooling and get 2 waterblocks for the vid cards. They are kinda expensive, but then again I will be able to use them with furter cards as well, so its a useful investment I guess.
My goal is to run 1ghz core, no matter what.
For daily use 1.36V and 800/800 in SLi sint a prob. AS its 7600GT default voltage, it doesnt even hurt at all.
Overall I am really more than impressed by those cards. I didnt think they would be that fast considering they only cost 80€ a piece.
Great work Freak :D
By the way, pots are ready at the post office :D
:D Great ;)
Very nice run with Your SLI setup :clap:
the links dosent work :(
Links in first post are outdated anyway.
I can only publish one score per benchmark, so I posted screenshots instead with all info and details.
I've put up some scores now I have volt modded. With mods cards run 780/900 at 1.70v gpu and 1.88v memory.
2001
http://service.futuremark.com/compare?2k1=9053300
30k in 03
http://service.futuremark.com/compare?2k3=4971909
13k in 05 but still behind TheStilt :D
http://service.futuremark.com/compare?3dm05=2227564
06
http://service.futuremark.com/compare?3dm06=511772
Regards
Andy
Nice :D
The ram on your cards seems to be really nice. What is its default voltage? 1.8V doesnt sound that high.
1.7V on the GPU hehe, I havent been that brave yet. My max was 1.49V.
I will try to break into the 30k and 60k today aswell if I have the time too.
Could you run the mem with 800Mhz for a comparisson how much slower it is over 900? Any cpu speed will do.
Hi,Quote:
Originally Posted by Fr3ak
That is the default voltage, when put up to 2.0v screen coruption occured so I ran them at stock for memory. Yes, I would not have gone to 1.7v normaly but I saw what TheStilt had gone to (1.75v) so that gave me some confidence. When you are up at that voltage and with your new memory stick when you manage to source it you are going to be way past 60k and 30k I would say. I have to wait for colder weather now I think ..still really pretty warm in the Uk for this time of year.
I will try and get you those results later but I promised my wife a family day today as I spent so long overclocking yesterday. I might do some runs at 750/750, 750/800, 750/850, 750/900 so you can how it scales. If I get time and if it is cool tonight.
Regards
Andy
Thanks that would be nice. But 800 and 900 for the mem would already bee enough.
When I tested various Ram speeds at around 600 on the core, 50mhz on the ram didnt make much of a difference, it was negligible.
But with higher core speeds, more bandwith might be helpful.
My cards now look like this:
http://ftp.tnib.de/pub/team-coca/mem...s_CIMG3909.JPG
http://ftp.tnib.de/pub/team-coca/mem...s_CIMG3921.JPG
Havent done any benching yet, but I played with them for several hours and they are game stable at 845/800 with 1.49/2.05V.
But I think I will run them at 1.35V 24/7. Thats 7600GT voltage, so its totally safe I'd say. With the stock coolers they were artifact free and stable for gaming at around 800/800 which is more than wnough for current games.
Nice work Zakelwe; 900Mhz. at 1.88v is very nice :)
Thanks massman, it is 1.2ns memory of course but for cheap cards pretty impressive.Quote:
Originally Posted by massman
Nice water set up Fr3ak, thats a very good speed for 24/7.
Regards
Andy
Well I finally did some benching with the cards watercooled.
VGPU:1.8V, VMEM:2.3V, 930Mhz on the core with a delta of -128 and 890Mhz mem speed.
I only tested the max of Aquamark3, because 3D Marks take way more time to find the max stable clocks.
http://ftp.tnib.de/pub/team-coca/mem...3%20180229.JPG
The max I had today was 180977, but unfortunatly the PC froze at the resultscreen and rebooted right away.
I did some more benching today. Maybe my last bench session with those cards. Its time to move on to something newer :)
No spectacular results to be honest. In fact I am very surprised how good the cards performed on stock cooling. The runs I did with 1.4xV were with stock cooling. Additional volts and way better cooling did not help that much.
I recently swapped my Seasonic S12 500W with a Silverstone Olympia 650W, but benching was really odd. I was able to run 05 with 4ghz and same settings with the Seasonic, but for whatever reason I could not come close to that frequency. And Something on the board started to make a weird noise while running fully loaded.
03:
http://ftp.tnib.de/pub/team-coca/mem...03%2031059.jpg
05:
http://ftp.tnib.de/pub/team-coca/mem...05%2014148.jpg