Asus P5B Dlx + E6300 air cooled =100% OC easy

I am amazed by the overclock potential of the Asus P5B Deluxe, air cooled, without any mods the motherboard goes up to 530 FSB on the Allendale :eek:

Setup
- ASUS P5B Deluxe WIFI-AP Edition no mods at all :)
- E6300 retail
- Tuniq Tower 120
- Corsair 6400C3
- Tagan 900W

Photo :
http://pedrorocha.planetaclix.pt/Asu..._fototower.jpg

Some results :

http://pedrorocha.planetaclix.pt/P5B529FSB_aAR.jpg

http://pedrorocha.planetaclix.pt/Eve...00_MemRead.jpg
http://pedrorocha.planetaclix.pt/Eve...0_MemWrite.jpg

The limit may be the memory (maximum VMem = 2.45v) ..

Next I will test with some Conroes - E6600 and maybe the 3DMark oriented X6800 ;) and let you know the results
:)

I'm only doing 410 fsb on my E6300, I can't even pass 422 fsb without it locking up instantly. Nice clocks *Jealous*

Nice results, Pedro. I seem to notice a trend regarding this board and high FSB.;)

wow m8 sick mem bandwidth there and one hell of a overclock...

i ordered a p5b and a 6400 hopefully I will have that kind of luck under water...

very nice :) Retail 4MB are supposed to be crap on 965 but I hope you can change this :D

nice Pedro ! :woot:
which bios ? edit : sorry i didn't see 0507 on the pic :slapass:
let us know with your next E6600 ;)

What's 965?

Anywho, those are very nice clocks. I might end up getting the E6300.

Quote:

---

Originally Posted by T07N

What's 965?

Anywho, those are very nice clocks. I might end up getting the E6300.

---

the chipset.

indeed nice oc pedro. :)

Nice work Pedro-san:toast:

I want to go up the FSB of my P5WDH too, like your P5B Dluxe.;)

hope to see those conroe results :) congrats man

i have tested this mobo with my X6800 and bios 507, booted at 3.98 with air cooling but i never achieved something with these things. Why ? very unstable, doesn't work correctly.
used pc28500 corsair, and show for example a lower speed on bios at boot tanh the one adjusted in the bios, and when i tried high freq windows and some prog showed me 4.180 or 4.8 GHZ !!!!! crazy !!

2 images from test
Memtest show 4.8, real speed is around 3.8 (windows showed also same speed, sandra, but CPUZ was ok

the other: bios indicate PC26400 and corsair was adjusted on pc28500

many pb and bugs......:stick:

http://xtremesystems.org/forums/atta...1&d=1155944988

http://xtremesystems.org/forums/atta...1&d=1155944988

Very nice job Pedro on air :toast: :clap: :clap:

E6300 isnt an Allendale but Conroe

approved by Intel US and Intel FRANCE ;)

Can you post your settings??? Vcore, Vmch,Vdimm etc.

Thanks

Simply amazing.

My plans for an P5W DH are no more after seeing the results from the P5B Deluxe with bios 0507 :clap:

Really awesome results, was kind of waiting on better boards or the p5wdh but the waits choking me!

Cant wait to see how the E66 runs!

Quote:

---

Originally Posted by sladesurfer

Can you post your settings??? Vcore, Vmch,Vdimm etc.

Thanks

---

Yes, could you please post your various settings, and load temperature at that speed please. Im building the same setup for my brother with teamgroup xtreme memory and would be interested in the results.

thanks

Quote:

---

Originally Posted by unit365

2 images from test
Memtest show 4.8, real speed is around 3.8 (windows showed also same speed, sandra, but CPUZ was ok

the other: bios indicate PC26400 and corsair was adjusted on pc28500

many pb and bugs......:stick:

http://xtremesystems.org/forums/atta...1&d=1155944988

http://xtremesystems.org/forums/atta...1&d=1155944988

---

those are just memtest bugs

Looks like I may get this board instead of P5W DH when I take thd dive into Conroe

I had decided against 500MHz rated memory because it was a crapshoot with the mobo but if this is indicative of most P5W performance then I'll reconsider :toast:

Nice - what voltage is that?

Per Wikipedia,

Allendale is a codename for stripped down versions of the Conroe processors with only 2MB of L2 cache. The E6300 (1.86GHz) and E6400 (2.13GHz), both with a 1066MT/s FSB, were released on July 27, 2006. At launch time, Intel's prices for the Core 2 Duo E6300 and E6400 processors were $183 USD and $224 USD each in quantities of 1000.

A distinction without a difference (other than cache).

Quote:

---

Originally Posted by cpulloverclock

E6300 isnt an Allendale but Conroe

approved by Intel US and Intel FRANCE ;)

---

amazing oc and amazing bandwidth

Big :woot: for you Pedro. Another 100% OC. P5B clocks high. Looking forward to the 3D.

hmm... i can not boot over 490FSB and i dont know why :(

i try it with vdimm & vmch mod, but it help nothing :stick:

Quote:

---

Originally Posted by Chri$ch

hmm... i can not boot over 490FSB and i dont know why :(

i try it with vdimm & vmch mod, but it help nothing :stick:

---

try sb voltage on 1,8 and cool it

i try it with all voltages on max (real vdimm 2.4v / mch 1.7v!). :(

Quote:

---

Originally Posted by Chri$ch

i try it with all voltages on max (real vdimm 2.4v / mch 1.7v!). :(

---

til here for now
http://www.rol-co.nl/images/4908m.png

only thing is .......can't use pci-e above 480fsb.......is that right pedro?
i see in the picture a pci-e graka :confused:

edit: bios 0507 solved this problem :)

ok, i think its my GBHZ Kit! I try it with divider (4:5) and they do max. 490Mhz on P5B Dlx! :(

On DS3 they do with 2.15v 520Mhz! :stick:

Quote:

---

Originally Posted by sladesurfer

Can you post your settings??? Vcore, Vmch,Vdimm etc.

Thanks

---

Here they are :

http://pedrorocha.planetaclix.pt/P5B_Bios1.jpg
http://pedrorocha.planetaclix.pt/P5B_Bios2.jpg
http://pedrorocha.planetaclix.pt/P5B_Bios4.jpg

;)

Rol-co, just 300 Mhz away from an other 100% OC :toast:

Thanks pedro, for helping here

notish when you push up the sb voltage it can get higher in fsb, strange becouse everything is disabled here , you got the same?

mij ram is holding me i think , need some others too try, , the 6300 chip is outstanding on this board , a 100% must be easy indeed

0507 solved the pci-e problem, 0505 it goes blank above 480

I´m at 530 benchstable, but performance drops a lot after 480 for some reason, and windows reads my clocks wrong like 425mhz after i pass the 480fsb.:(

spi is ok, but 3dmark is a lot slower, and expecialy bandwith get buged to like 360mb/s from 75xxmb/s in sandra and everest:(

Nice OC there Pedro, 100%. This is like getting 2 Allendales for the price of one lol.

lol...The Tuniq imo doesn't belong in air cooling...anything larger than a video card (in both width and height :eek: ) should be called "cold" air cooling :p

Perkam

Quote:

---

Originally Posted by perkam

lol...The Tuniq imo doesn't belong in air cooling...anything larger than a video card (in both width and height :eek: ) should be called "cold" air cooling :p

Perkam

---

lol, i was wondering if that tower could fit inside a case, let say ThermalTake Soprano?.. it looks big, i mean big. but i'll keep my Golden Orb for now.

Quote:

---

Originally Posted by perkam

lol...The Tuniq imo doesn't belong in air cooling...anything larger than a video card (in both width and height :eek: ) should be called "cold" air cooling :p

Perkam

---

:ROTF:

Has anybody compared it to Scythe Infinity? I'd like the Tuniq just because everybody uses/wants it, but I swear the Infinity would be better :P Plus I hate that the fan is right in the middle.. But hey, if I can't get the Tuniq, I'll get the Infinity.

Quote:

---

Originally Posted by Pedro Rocha

Here they are :

http://pedrorocha.planetaclix.pt/P5B_Bios1.jpg
http://pedrorocha.planetaclix.pt/P5B_Bios2.jpg
http://pedrorocha.planetaclix.pt/P5B_Bios4.jpg

;)

---

Thanks, I will be getting the same board:)

Thanks Pedro Rocha... Legendary overclock man.

The screenies are really helpful. Hope to be ab le to transpose some of the settings to my P5W-DH board.

Hey Pedro.... its only 98% OC :D

Quote:

---

Originally Posted by MaSell

Hey Pedro.... its only 98% OC :D

---

lol

Quote:

---

Originally Posted by MaSell

Hey Pedro.... its only 98% OC :D

---

"Micron D9 @ 1000MHz CL4-4-4-8 " in your sig are only 980MHz :D

Great clocks with air Pedro!

Quote:

---

Originally Posted by ent

"Micron D9 @ 1000MHz CL4-4-4-8 " in your sig are only 980MHz :D

Great clocks with air Pedro!

---

:ROTF: :ROTF: :ROTF:

I would like to thank Mr. Pedro Rocha for this post.

It really helped me with my Oc'ing, I was unable to hit the 100% OC but 95% I think is good for someone new :)

Setup
- ASUS P5B Deluxe WIFI-AP Edition no mods
- E6300 retail
- Custom Cooling
- Kingston HyperX KHX6400D2K2
- Truepower 480W

Used the same volts but was unstable clocked down just 9Mhz = Stable :woot:

http://valid.x86-secret.com/show_oc?id=130025

Thanks again Pedro!!

mine wouldnt pass 520fsb :(

I was so close, the chip wouldnt take any more FSB though... didnt matter what multi.

Nice clocks.