-
E6700@ASUS P5WDG2 WS PRO result
-
very nice.. rarely see ya using a case :D
-
is this the fsb limit?or you just stop cuz the cpu temp is too high?:)
great work as always man:toast:
Fabio:cool:
-
Quote:
Originally Posted by eva2000
very nice.. rarely see ya using a case :D
I pack it for someone.
-
hello!
what is the third coper cooler on the board for ? looks like someting new from P5WDH and P5B dlx between south and north bridge
thanks for your always ahead tests and infos ;)
-
Hmmm,
looks like the bridge for the PCI-X slots....
Greetz,
Remorfer
-
I use this board too and it ROCKS!!! :banana: :banana: :banana:
:woot:
But... just a short question... why you used for the RAM sockel A2 and B1 ?
Thanks...
-
Quote:
Originally Posted by herderien
hello!
what is the third coper cooler on the board for ? looks like someting new from P5WDH and P5B dlx between south and north bridge
thanks for your always ahead tests and infos ;)
the bridge for the PCI-X slots:D
-
Quote:
Originally Posted by commy
I use this board too and it ROCKS!!! :banana: :banana: :banana:
:woot:
But... just a short question... why you used for the RAM sockel A2 and B1 ?
Thanks...
a little trick:D
it's still dual channel
but it's could be better to OC;)
-
Quote:
Originally Posted by coolaler
the bridge for the PCI-X slots:D
Yeah, you can run Crossfire and some fast: Areca RAID controller. :banana:
-
Excellent..Drop a Kentsfield in that and you have the perfect machine.
Good post and excellent pics!:clap:
-
Quote:
Originally Posted by coolaler
a little trick:D
it's still dual channel
but it's could be better to OC;)
Hey, okay...sounds very good :clap:
Maybe you have some more informations why this could be? :fact:
-
wow i didnt know conroe could run at 88c!!!!!! there i was thinking 60c is to hot?????
-
88 DEGREES!!!! Thats like MELTING THE SOLDER HOT. Didn't Shamino rip 2 cores off @ 85 Degrees while trying to remove IHS's?!?
in-freakin-sane...
-
Dam what is too hot for these chips?
I am runnin scared @ 62
-
Coolaler:
what kind of CFM's does that rear 120 MM fan put out?....
the reason i am asking; is it sufficient to pull enough air over that monster heat sink?
-
did you happen to find the boardst max stable fsb?
do you really think AsusProbe was correct about the temps
i mean, did you touch the Heatsink?
@ T>70 you are not supposed to touch the heatpipes for over 2-3secs
T.I.A.
-
very nice!
which lian li is that? I think it's the one I'm going to buy soon since my antec superlanboy has started rattleing :/
-
Quote:
Originally Posted by coolaler
a little trick:D
it's still dual channel
but it's could be better to OC;)
That's a new one on me. Can you explain how that works?
-
Quote:
Originally Posted by menlatin
88 DEGREES!!!! Thats like MELTING THE SOLDER HOT. Didn't Shamino rip 2 cores off @ 85 Degrees while trying to remove IHS's?!?
in-freakin-sane...
good point. doesn't seem like it could really be 85 or it's a sink seating problem maybe? In any case, so far the board seems only on par with an average P5WDH.
Cooaler, can you try at 1.85Vmch at over 400fsb?
-
Quote:
Originally Posted by coolaler
a little trick:D
it's still dual channel
but it's could be better to OC;)
does this apply to the non-pro version as well?
-
If you look at the intel data sheet for the i975x mch controller oddly enough it says any bank can be populated in any order to run dual channel mode.
http://download.intel.com/design/chi...s/31015801.pdf
Section 9.2.2.1
I guess the best way to find out if it works on your board would be to try it.
-
wonder when it'll be available in the US?
-
This might be a silly questions..
But whats the pro/cons against Asus P5W-DH ???
-
That is very likely not the real temperature at all.
-k0nsl
Quote:
Originally Posted by menlatin
88 DEGREES!!!! Thats like MELTING THE SOLDER HOT. Didn't Shamino rip 2 cores off @ 85 Degrees while trying to remove IHS's?!?
in-freakin-sane...
-
Quote:
Originally Posted by nFo
Yeah, you can run Crossfire and some fast: Areca RAID controller. :banana:
I will try and run a SLI setup with an Areca 1120 on this board! I have the board, the 2 7950's, just waiting on the PSU and memory.
Cheers,
AP
Edit: Corrected model of raid card.
-
Quote:
Originally Posted by coolaler
I pack it for someone.
oh you need my address for sending :D j/k
-
Quote:
Originally Posted by apfubar
I will try and run a SLI setup with an Areca 1220 on this board! I have the board, the 2 7950's, just waiting on the PSU and memory.
Cheers,
AP
2 7950's and a 1220 won't work, you only have 2 16x slots
-
Im very skeptical of that board. Coolaler seems to hit bus speeds none of us can, for whatever reason. I hope im proven wrong if people decide to buy this board, but my gut tells me otherwise.
Nice results Coolaler.
-
Wow these guys sure do test alot of products...coolaler has tested like every conroe cpu, most the main mobos, alot of ram, graphic cards, psus...I'm not sure whether he bought this stuff or not, but thats a crap load of money! Do people get this stuff shipped to them for free or something cuz thats alotttt of money.
-
Quote:
Originally Posted by Ender17
2 7950's and a 1220 won't work, you only have 2 16x slots
right, it would have to be an 1120
-
hi,
Do you change the cpu coeffs in the Bios as Asus P5B Deluxe with one CPU ES
Best regards
-
Quote:
Originally Posted by andyisc00l
Wow these guys sure do test alot of products...coolaler has tested like every conroe cpu, most the main mobos, alot of ram, graphic cards, psus...I'm not sure whether he bought this stuff or not, but thats a crap load of money! Do people get this stuff shipped to them for free or something cuz thats alotttt of money.
Its his job, he runs www.coolaler.com :)
- People, I didnt got any answer on the difference between P5W-DH and this board, some of ya must be able to tell me.. :)
-
Quote:
Originally Posted by M.Beier
Its his job, he runs
www.coolaler.com :)
- People, I didnt got any answer on the difference between P5W-DH and this board, some of ya must be able to tell me.. :)
well besides the obvious differences you can see by reading spec sheets, I've heard a different motherboard team worked on this one
-
This board is by far the best 975 ever unless Foxconn 975 AB board shows up;)
Nice work:)
-
Quote:
Originally Posted by Onepagebook
This board is by far the best 975 ever unless Foxconn 975 AB board shows up;)
Nice work:)
this one?
http://www.newegg.com/Product/Produc...82E16813186101
-
oh ya
I will have that either on Tuesday or Wednesday
-
Quote:
Originally Posted by Onepagebook
oh ya
I will have that either on Tuesday or Wednesday
cool be sure and let us know :)
-
Quote:
Originally Posted by Ender17
2 7950's and a 1220 won't work, you only have 2 16x slots
Sorry wrong raid card, 1120 it is. The PCI-X one
Cheers,
AP.
-
Quote:
Originally Posted by M.Beier
Its his job, he runs
www.coolaler.com :)
- People, I didnt got any answer on the difference between P5W-DH and this board, some of ya must be able to tell me.. :)
I have the manual in front of me. I can do some digging through it, if you have Q's on something covered there.
I also would love to see a schematic of the chipset layout for this one.
Cheers,
AP.
-
I would love a solid 1000mhz oc when my chips come in.
